Merge remote-tracking branch 'origin/main' into feat/panama-health

# Conflicts:
#	config/dot/quickshell/modules/settings/ServicesPage.qml
#	config/dot/quickshell/modules/settings/SettingsShell.qml
#	config/dot/quickshell/modules/settings/SettingsSidebar.qml

config/dot/quickshell/config/DesktopPreferences.qml

@@ -98,7 +98,26 @@ Singleton {
             // back to shipped defaults and let the next write replace it.
             parsed = {};
         }
-        root.values = (parsed && typeof parsed === "object") ? parsed : {};
+        const raw = (parsed && typeof parsed === "object") ? parsed : {};
+
+        // Upgrade before anything reads a value. A stored key the current
+        // schema no longer recognises is carried through untouched and silently
+        // stops taking effect, so the conversion has to happen here rather than
+        // being noticed later by whoever owns that setting.
+        const result = Migrations.apply(raw);
+        root.values = result.values;
+
+        if (result.migrated)
+            console.info("Settings migrated from version", result.from, "to", result.to + ":",
+                         result.applied.join("; "));
+
+        // Write whenever the version moved, which includes stamping a file
+        // written before versioning existed. Left unwritten, the stamp lives
+        // only in memory and is redone on every launch, and a migration that is
+        // not idempotent would compound.
+        if (result.changed)
+            persistTimer.restart();
+
         root.revision++;
         root.loaded = true;
     }

config/dot/quickshell/config/Migrations.qml

@@ -0,0 +1,121 @@
+pragma Singleton
+
+// Versioned upgrades for the settings file.
+//
+// The schema is the single source of truth for what a setting IS, but it cannot
+// describe what a setting USED to be. Renaming a key, changing its units, or
+// splitting one setting into two all leave a stored value that the new schema
+// does not recognise -- and an unrecognised key is silently carried through
+// untouched, so the user's choice simply stops taking effect with nothing to
+// say why. That is the failure this exists to prevent.
+//
+// HOW IT WORKS
+//
+// settings.json carries a schemaVersion. On load, every migration with a
+// version ABOVE the stored one runs in order, then the file is stamped with
+// `current`. A file with no schemaVersion at all is a file written before this
+// existed; it is stamped at `baseline` and NOT migrated, because those
+// migrations were never written for it.
+//
+// WRITING ONE
+//
+//   { version: 2, describe: "rename dockDelay to dockHideDelayMs",
+//     migrate: values => { ... return values; } }
+//
+// Rules that make this safe to run against a real user's file:
+//
+//   * migrate() receives the whole values object and returns it. Mutating and
+//     returning the same object is fine.
+//   * NEVER delete a key you are not replacing. Unknown keys are deliberately
+//     preserved so that rolling back to an older Panama does not discard a
+//     newer version's settings, and a migration is the one place that promise
+//     could quietly be broken.
+//   * A migration must tolerate its input being absent or the wrong type. It
+//     runs against files written by every previous version, including ones
+//     that were hand-edited.
+//   * Migrations never run twice: the stored version only moves forward.
+
+import QtQuick
+
+QtObject {
+    id: root
+
+    // What a file written today is stamped with. Bump this when adding a
+    // migration, to the version of the migration you added.
+    readonly property int current: 1
+
+    // Files predating versioning are stamped here without being migrated.
+    readonly property int baseline: 1
+
+    readonly property string versionKey: "schemaVersion"
+
+    // Ordered by version. Empty is the correct state until the first breaking
+    // schema change -- this exists so that change is a routine edit rather than
+    // an emergency.
+    readonly property var steps: []
+
+    function storedVersion(values: var): int {
+        const raw = values ? values[root.versionKey] : undefined;
+        return (typeof raw === "number" && isFinite(raw)) ? Math.floor(raw) : 0;
+    }
+
+    // Returns { values, migrated, changed, from, to, applied }.
+    //
+    // `applied` names each step that ran, so the caller can log something
+    // meaningful rather than "settings changed somehow". `changed` is the one
+    // the caller should write on: stamping a pre-versioning file changes it
+    // without running any step, and left unwritten the stamp would live only in
+    // memory and be redone on every launch.
+    function apply(values: var): var {
+        return root.applyWith(values, root.steps, root.current, root.baseline);
+    }
+
+    // The same logic with the step list injected, so the machinery can be
+    // tested against fixture migrations. The real list is empty until the first
+    // breaking schema change, and a mechanism that has never run against a
+    // failing step is not one to find out about during an upgrade.
+    function applyWith(values: var, steps: var, current: int, baseline: int): var {
+        const safe = (values && typeof values === "object") ? values : {};
+        const from = root.storedVersion(safe);
+
+        // No version: written before versioning existed. Stamp it and stop.
+        // Running the migration list against it would apply upgrades designed
+        // for schemas this file never had.
+        if (from === 0) {
+            safe[root.versionKey] = baseline;
+            return { values: safe, migrated: false, changed: true, from: 0, to: baseline, applied: [] };
+        }
+
+        // A file from a NEWER Panama. Left completely alone: downgrading its
+        // keys is not something this can do correctly, and unknown keys are
+        // already preserved, so the older build simply ignores what it does not
+        // understand.
+        if (from > current)
+            return { values: safe, migrated: false, changed: false, from: from, to: from, applied: [] };
+
+        const applied = [];
+        let working = safe;
+        for (const step of steps) {
+            if (step.version <= from || step.version > current)
+                continue;
+            try {
+                const result = step.migrate(working);
+                if (result && typeof result === "object")
+                    working = result;
+                applied.push(step.version + ": " + step.describe);
+            } catch (error) {
+                // One bad migration must not cost the user every setting. Stop
+                // at the last good version so the next launch retries from
+                // here rather than skipping the failed step forever.
+                console.warn("Migrations: step", step.version, "failed:", error);
+                working[root.versionKey] = step.version - 1;
+                return { values: working, migrated: applied.length > 0, changed: applied.length > 0,
+                         from: from, to: step.version - 1, applied: applied };
+            }
+        }
+
+        working[root.versionKey] = current;
+        return { values: working, migrated: applied.length > 0, changed: from !== current,
+                 from: from, to: current, applied: applied };
+    }
+}

config/dot/quickshell/config/PreferenceSchema.qml

@@ -128,10 +128,21 @@ Singleton {
         {
             key: "vrrPolicy", type: "enum", def: 3, group: "display",
             label: "Variable refresh rate",
-            detail: "Content-aware matches the display to what is on screen",
+            detail: "Matches the display's refresh rate to what is on screen",
+            // All four the compositor publishes, rather than the two that were
+            // here. Always-on VRR is a legitimate choice on a panel that
+            // handles it well, and it was simply unreachable -- as was
+            // fullscreen-only, which is what someone wanting VRR for video
+            // rather than games wants.
             options: [
-                { value: 0, label: "Off" },
-                { value: 3, label: "Content-aware" }
+                { value: 0, label: "Off",
+                  detail: "The display runs at a fixed refresh rate" },
+                { value: 1, label: "Always on",
+                  detail: "Best on panels that handle low refresh rates without flicker" },
+                { value: 2, label: "Fullscreen only",
+                  detail: "Any fullscreen window, including video" },
+                { value: 3, label: "Fullscreen games",
+                  detail: "Only fullscreen games, which is the safest default" }
             ],
             hypr: { path: ["misc", "vrr"], option: "misc:vrr", readAs: "int" }
         },
@@ -140,8 +151,12 @@ Singleton {
             label: "Direct scanout",
             detail: "Lets fullscreen content bypass compositing",
             options: [
-                { value: 0, label: "Off" },
-                { value: 2, label: "Automatic" }
+                { value: 0, label: "Off",
+                  detail: "Everything goes through the compositor" },
+                { value: 1, label: "Always on",
+                  detail: "Forced rather than decided per surface; can drop frames on some drivers" },
+                { value: 2, label: "Automatic",
+                  detail: "The compositor decides per surface, which is the safe default" }
             ],
             hypr: { path: ["render", "direct_scanout"], option: "render:direct_scanout", readAs: "int" }
         },
@@ -257,6 +272,24 @@ Singleton {
             detail: "XKB layout name, or a comma-separated list to switch between",
             hypr: { path: ["input", "kb_layout"], option: "input:kb_layout", readAs: "str" }
         },
+        {
+            key: "keyboardVariant", type: "string", def: "", group: "input",
+            // Same shape as the layout list and for the same reason: this is
+            // serialised into an hl.config string.
+            pattern: "^$|^[a-z0-9_]{1,24}(,[a-z0-9_]{1,24})*$",
+            label: "Layout variant",
+            detail: "XKB variant, such as dvorak or colemak. Empty for the standard layout",
+            hypr: { path: ["input", "kb_variant"], option: "input:kb_variant", readAs: "str" }
+        },
+        {
+            key: "keyboardOptions", type: "string", def: "", group: "input",
+            // XKB option names are colon-separated pairs in a comma-separated
+            // list, e.g. "compose:ralt,caps:escape".
+            pattern: "^$|^[a-z0-9_]+:[a-z0-9_]+(,[a-z0-9_]+:[a-z0-9_]+)*$",
+            label: "Keyboard options",
+            detail: "XKB options, such as compose:ralt to make right Alt a compose key",
+            hypr: { path: ["input", "kb_options"], option: "input:kb_options", readAs: "str" }
+        },
         {
             key: "numlockByDefault", type: "bool", def: true, group: "input",
             label: "Num Lock on login",
@@ -281,12 +314,28 @@ Singleton {
         },
         {
             key: "followMouse", type: "enum", def: 1, group: "input",
-            label: "Focus follows pointer",
-            detail: "Click to focus matches GNOME; sloppy focus follows the pointer",
+            label: "Pointer focus",
+            detail: "What moving the pointer does to which window is focused",
+            // These labels were wrong, and wrong in the worst way: value 1 was
+            // shown as "Click to focus" while Hyprland's 1 means the opposite.
+            // The compositor publishes the authoritative mapping itself --
+            // `hyprctl descriptions` gives
+            //   map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}]
+            // -- so a desktop labelled "Click to focus" was in fact following
+            // the pointer, and the way to actually get click-to-focus was to
+            // choose "Never". Value 3 was missing entirely.
+            //
+            // enum-hypr-map-contract now pins every mapped enum against that
+            // published map, so this cannot drift again.
             options: [
-                { value: 0, label: "Never" },
-                { value: 1, label: "Click to focus" },
-                { value: 2, label: "Sloppy focus" }
+                { value: 0, label: "Click to focus",
+                  detail: "Moving the pointer never changes focus" },
+                { value: 1, label: "Focus follows pointer",
+                  detail: "The window under the pointer takes focus as you move" },
+                { value: 2, label: "Pointer detached",
+                  detail: "The pointer highlights windows on its own; clicking moves keyboard focus" },
+                { value: 3, label: "Pointer fully separate",
+                  detail: "Clicking does not move keyboard focus at all" }
             ],
             hypr: { path: ["input", "follow_mouse"], option: "input:follow_mouse", readAs: "int" }
         },
@@ -310,6 +359,203 @@ Singleton {
             hypr: { path: ["cursor", "inactive_timeout"], option: "cursor:inactive_timeout", readAs: "float" }
         },
 
+        // ── Pointer ─────────────────────────────────────────────────────────
+        //
+        // Every `readAs` below was read back off the running compositor rather
+        // than guessed. Two are not what they look like: touchpad drag lock is
+        // an int with three states, not a switch, and scroll factors are floats
+        // even at their default of exactly 1.
+        {
+            key: "naturalScroll", type: "bool", def: false, group: "pointer",
+            label: "Natural scrolling",
+            detail: "Content follows the direction of your fingers, as on a phone",
+            hypr: { path: ["input", "natural_scroll"], option: "input:natural_scroll", readAs: "bool" }
+        },
+        {
+            key: "accelProfile", type: "enum", def: "flat", group: "pointer",
+            label: "Acceleration",
+            detail: "Flat moves the pointer the same distance however fast you move",
+            options: [
+                { value: "flat", label: "Flat" },
+                { value: "adaptive", label: "Adaptive" }
+            ],
+            hypr: { path: ["input", "accel_profile"], option: "input:accel_profile", readAs: "str" }
+        },
+        {
+            key: "scrollFactor", type: "real", def: 1.0, min: 0.1, max: 4.0, step: 0.1,
+            group: "pointer",
+            label: "Scroll speed",
+            detail: "Multiplies how far one notch of the wheel scrolls",
+            hypr: { path: ["input", "scroll_factor"], option: "input:scroll_factor", readAs: "float" }
+        },
+        {
+            key: "leftHanded", type: "bool", def: false, group: "pointer",
+            label: "Left-handed",
+            detail: "Swap the primary and secondary buttons",
+            hypr: { path: ["input", "left_handed"], option: "input:left_handed", readAs: "bool" }
+        },
+
+        // ── Touchpad ────────────────────────────────────────────────────────
+        //
+        // Shown only on machines that have one. These are separate from the
+        // pointer settings above because libinput keeps them separate: a mouse
+        // and a touchpad on the same machine can scroll in opposite directions,
+        // and usually should.
+        {
+            key: "touchpadTapToClick", type: "bool", def: true, group: "touchpad",
+            label: "Tap to click",
+            detail: "A tap counts as a click without pressing down",
+            // The Lua config key and the hyprctl option name genuinely differ
+            // here: hl.config wants input.touchpad.tap_to_click, getoption
+            // answers to input:touchpad:tap-to-click. Using either spelling for
+            // both fails -- a hyphen is not a Lua identifier, and the
+            // underscored name is not a known option to getoption. This is what
+            // the two separate fields are for.
+            hypr: { path: ["input", "touchpad", "tap_to_click"], option: "input:touchpad:tap-to-click", readAs: "bool" }
+        },
+        {
+            key: "touchpadNaturalScroll", type: "bool", def: true, group: "touchpad",
+            label: "Natural scrolling",
+            detail: "Content follows the direction of your fingers",
+            hypr: { path: ["input", "touchpad", "natural_scroll"], option: "input:touchpad:natural_scroll", readAs: "bool" }
+        },
+        {
+            key: "touchpadDisableWhileTyping", type: "bool", def: true, group: "touchpad",
+            label: "Disable while typing",
+            detail: "Ignore the touchpad briefly after a keystroke, so a palm cannot move the pointer",
+            hypr: { path: ["input", "touchpad", "disable_while_typing"], option: "input:touchpad:disable_while_typing", readAs: "bool" }
+        },
+        {
+            key: "touchpadScrollFactor", type: "real", def: 1.0, min: 0.1, max: 4.0, step: 0.1,
+            group: "touchpad",
+            label: "Scroll speed",
+            detail: "Multiplies how far a two-finger scroll travels",
+            hypr: { path: ["input", "touchpad", "scroll_factor"], option: "input:touchpad:scroll_factor", readAs: "float" }
+        },
+        {
+            key: "touchpadDragLock", type: "enum", def: 0, group: "touchpad",
+            label: "Drag lock",
+            detail: "Keeps a tap-and-drag active when you lift a finger mid-drag",
+            // An int with three states rather than a switch, which is why this
+            // is an enum: reported as `int` by getoption, not `bool`.
+            options: [
+                { value: 0, label: "Off" },
+                { value: 1, label: "On" },
+                { value: 2, label: "On, until you tap again" }
+            ],
+            hypr: { path: ["input", "touchpad", "drag_lock"], option: "input:touchpad:drag_lock", readAs: "int" }
+        },
+        {
+            key: "touchpadMiddleButtonEmulation", type: "bool", def: false, group: "touchpad",
+            label: "Middle-click by pressing both buttons",
+            detail: "Pressing left and right together acts as a middle click",
+            hypr: { path: ["input", "touchpad", "middle_button_emulation"], option: "input:touchpad:middle_button_emulation", readAs: "bool" }
+        },
+
+        // ── Multitasking ────────────────────────────────────────────────────
+        //
+        // GNOME's Multitasking panel, in Hyprland's terms. The Desktop page
+        // described the first two of these as read-only facts ("Layout:
+        // Tiling"), which was never true -- they are ordinary settings that
+        // happened not to have controls.
+        //
+        // Defaults here are Panama's shipped values from hypr/looks.lua, not
+        // Hyprland's own, so restoring defaults returns the desktop to how it
+        // ships rather than to how Hyprland would behave with no config.
+        {
+            key: "windowLayout", type: "enum", def: "dwindle", group: "multitasking",
+            label: "Tiling layout",
+            detail: "Dwindle splits the focused window; master keeps one large window beside a stack",
+            options: [
+                { value: "dwindle", label: "Dwindle" },
+                { value: "master", label: "Master and stack" }
+            ],
+            hypr: { path: ["general", "layout"], option: "general:layout", readAs: "str" }
+        },
+        {
+            key: "preserveSplit", type: "bool", def: true, group: "multitasking",
+            label: "Keep split direction",
+            detail: "New windows follow the split of the window they replace, instead of always halving the longer side",
+            hypr: { path: ["dwindle", "preserve_split"], option: "dwindle:preserve_split", readAs: "bool" }
+        },
+        {
+            key: "forceSplit", type: "enum", def: 0, group: "multitasking",
+            label: "New windows open",
+            detail: "Where a new window lands relative to the one that was focused",
+            options: [
+                { value: 0, label: "Where the pointer is" },
+                { value: 1, label: "Always left or above" },
+                { value: 2, label: "Always right or below" }
+            ],
+            hypr: { path: ["dwindle", "force_split"], option: "dwindle:force_split", readAs: "int" }
+        },
+        {
+            key: "windowSnapping", type: "bool", def: true, group: "multitasking",
+            label: "Snap floating windows",
+            detail: "Floating windows stick to screen edges and to each other as you drag them",
+            hypr: { path: ["general", "snap", "enabled"], option: "general:snap:enabled", readAs: "bool" }
+        },
+        {
+            key: "workspaceBackAndForth", type: "bool", def: false, group: "multitasking",
+            label: "Switch back and forth",
+            detail: "Selecting the workspace you are already on returns you to the previous one",
+            hypr: { path: ["binds", "workspace_back_and_forth"], option: "binds:workspace_back_and_forth", readAs: "bool" }
+        },
+        {
+            key: "allowWorkspaceCycles", type: "bool", def: false, group: "multitasking",
+            label: "Wrap around at the ends",
+            detail: "Moving past the last workspace continues from the first",
+            hypr: { path: ["binds", "allow_workspace_cycles"], option: "binds:allow_workspace_cycles", readAs: "bool" }
+        },
+        {
+            key: "focusOnActivate", type: "bool", def: false, group: "multitasking",
+            label: "Let applications take focus",
+            detail: "An application asking for attention is switched to, rather than only highlighted",
+            hypr: { path: ["misc", "focus_on_activate"], option: "misc:focus_on_activate", readAs: "bool" }
+        },
+        {
+            key: "mouseMoveFocusesMonitor", type: "bool", def: true, group: "multitasking",
+            label: "Pointer changes active display",
+            detail: "Moving the pointer to another display makes it the active one",
+            hypr: { path: ["misc", "mouse_move_focuses_monitor"], option: "misc:mouse_move_focuses_monitor", readAs: "bool" }
+        },
+
+        // ── Accessibility ───────────────────────────────────────────────────
+        //
+        // Only what Hyprland can actually deliver. GNOME's sticky keys, slow
+        // keys, bounce keys and mouse keys are AccessX, an X11 server feature:
+        // XKB under Wayland has no accessx option group at all (verified
+        // against evdev.lst), and Hyprland does not implement it. The
+        // compositor will happily STORE "accessx:enable" as a keyboard option
+        // and nothing will ever act on it, which is exactly the kind of switch
+        // this app refuses to ship.
+        {
+            key: "magnifierFactor", type: "real", def: 1.0, min: 1.0, max: 5.0, step: 0.1,
+            group: "accessibility",
+            label: "Magnifier",
+            detail: "Magnifies the screen around the pointer. 1.0 is off",
+            hypr: { path: ["cursor", "zoom_factor"], option: "cursor:zoom_factor", readAs: "float" }
+        },
+        {
+            key: "magnifierRigid", type: "bool", def: false, group: "accessibility",
+            label: "Magnifier follows in steps",
+            detail: "Moves the magnified view in increments rather than gliding with the pointer",
+            hypr: { path: ["cursor", "zoom_rigid"], option: "cursor:zoom_rigid", readAs: "bool" }
+        },
+        {
+            key: "dimInactive", type: "bool", def: false, group: "accessibility",
+            label: "Dim inactive windows",
+            detail: "Darkens every window except the focused one, so the active window is unmistakable",
+            hypr: { path: ["decoration", "dim_inactive"], option: "decoration:dim_inactive", readAs: "bool" }
+        },
+        {
+            key: "dimStrength", type: "real", def: 0.5, min: 0.05, max: 0.9, step: 0.05,
+            group: "accessibility",
+            label: "Dim amount",
+            detail: "How much darker unfocused windows are",
+            hypr: { path: ["decoration", "dim_strength"], option: "decoration:dim_strength", readAs: "float" }
+        },
+
         // ── Night light ─────────────────────────────────────────────────────
         {
             key: "nightLightEnabled", type: "bool", def: false, group: "nightLight",

config/dot/quickshell/config/qmldir

@@ -4,3 +4,4 @@ singleton PreferenceSchema 1.0 PreferenceSchema.qml
 singleton HomePreferences 1.0 HomePreferences.qml
 singleton Settings 1.0 Settings.qml
 singleton Theme 1.0 Theme.qml
+singleton Migrations 1.0 Migrations.qml

config/dot/quickshell/migrations-harness.qml

@@ -0,0 +1,56 @@
+// Exercises Migrations.applyWith against fixture steps and prints a verdict per
+// case. Run by tests/quickshell/migrations-contract.sh.
+//
+// Fixture steps rather than the real list: the real one is empty until the
+// first breaking schema change, and a mechanism that has never been run against
+// a failing step is not one to discover the behaviour of during an upgrade.
+
+import Quickshell
+import QtQuick
+import qs.config
+
+ShellRoot {
+    Component.onCompleted: {
+        const steps = [
+            { version: 2, describe: "add b", migrate: v => { v.b = (v.a ?? 0) + 1; return v; } },
+            { version: 3, describe: "add c", migrate: v => { v.c = "three"; return v; } },
+            { version: 4, describe: "explode", migrate: v => { throw new Error("boom"); } }
+        ];
+        const results = {};
+
+        // No version at all: a file written before versioning. Stamped, never
+        // migrated.
+        let r = Migrations.applyWith({ a: 1 }, steps, 3, 1);
+        results.unversioned = { v: r.values.schemaVersion, migrated: r.migrated,
+                                changed: r.changed, untouched: r.values.b === undefined };
+
+        // Older file: every step above its version runs, in order.
+        r = Migrations.applyWith({ a: 1, schemaVersion: 1 }, steps, 3, 1);
+        results.upgrade = { v: r.values.schemaVersion, b: r.values.b, c: r.values.c,
+                            count: r.applied.length, migrated: r.migrated };
+
+        // Already current: nothing runs.
+        r = Migrations.applyWith({ schemaVersion: 3, keep: "me" }, steps, 3, 1);
+        results.current = { v: r.values.schemaVersion, migrated: r.migrated,
+                            kept: r.values.keep === "me", b: r.values.b === undefined };
+
+        // From the future: left completely alone, including its unknown keys.
+        r = Migrations.applyWith({ schemaVersion: 9, futureKey: "x" }, steps, 3, 1);
+        results.future = { v: r.values.schemaVersion, migrated: r.migrated,
+                           changed: r.changed, kept: r.values.futureKey === "x" };
+
+        // A failing step stops at the last good version rather than losing the
+        // file or skipping past the failure forever.
+        r = Migrations.applyWith({ schemaVersion: 1, a: 5 }, steps, 4, 1);
+        results.failure = { v: r.values.schemaVersion, b: r.values.b, c: r.values.c,
+                            kept: r.values.a === 5, count: r.applied.length };
+
+        // Unknown keys survive a migration: rolling back to an older Panama
+        // must not discard a newer version's settings.
+        r = Migrations.applyWith({ schemaVersion: 1, unknownFromFuture: true }, steps, 3, 1);
+        results.preserved = { kept: r.values.unknownFromFuture === true };
+
+        console.info("PANAMA-MIGRATIONS " + JSON.stringify(results));
+        Qt.callLater(() => Qt.quit());
+    }
+}

config/dot/quickshell/modules/settings/AboutPage.qml

@@ -4,11 +4,20 @@ import qs.config
 import qs.services
 
 SettingsPage {
-    title: "About Panama"
+    id: root
+
+    title: "About"
     lede: "A curated Hyprland desktop built around focus, speed, and good taste."
 
+    Component.onCompleted: {
+        if (!MachineInfo.scanned)
+            MachineInfo.refresh();
+        if (GraphicsDevices.devices.length === 0)
+            GraphicsDevices.refresh();
+    }
+
     SettingsCard {
-        title: "Panama Desktop"
+        title: "Desktop"
         subtitle: "Tokyo Night Moon · Prism glass · native tiling"
 
         TextRow {
@@ -31,6 +40,59 @@ SettingsPage {
         }
     }
 
+    // What GNOME's About panel answers and this page did not: what am I running
+    // on. Rows come from MachineInfo, except graphics, which is joined from
+    // GraphicsDevices rather than read a second time -- two readouts of the same
+    // hardware are two things that can disagree.
+    //
+    // The join splices the GPU rows in directly after Processor rather than
+    // appending them, so the card reads the way fastfetch does: what the system
+    // is, then what is installed on it, then the hardware underneath. A GPU
+    // listed after "Disk" reads as an afterthought.
+    readonly property var machineRows: {
+        const rows = (MachineInfo.facts ?? []).slice();
+        const gpus = GraphicsDevices.devices ?? [];
+        if (gpus.length === 0)
+            return rows;
+
+        const graphics = gpus.map((device, index) => ({
+            label: gpus.length > 1 ? "Graphics " + (index + 1) : "Graphics",
+            value: device.name
+        }));
+
+        const after = rows.findIndex(row => row.label === "Processor");
+        if (after < 0)
+            return rows.concat(graphics);
+        return rows.slice(0, after + 1).concat(graphics, rows.slice(after + 1));
+    }
+
+    SettingsCard {
+        title: "This machine"
+        subtitle: "Hardware and system, as the kernel reports it."
+
+        Repeater {
+            model: root.machineRows
+
+            TextRow {
+                id: machineRow
+                required property var modelData
+                required property int index
+
+                label: machineRow.modelData.label
+                value: machineRow.modelData.value
+                divider: machineRow.index < root.machineRows.length - 1
+            }
+        }
+
+        TextRow {
+            visible: MachineInfo.scanned && root.machineRows.length === 0
+            label: "Hardware"
+            detail: "The system did not report anything readable"
+            value: "Unavailable"
+            divider: false
+        }
+    }
+
     SettingsCard {
         title: "Design principles"
 

config/dot/quickshell/modules/settings/AccessibilityPage.qml

@@ -25,32 +25,61 @@ SettingsPage {
 
     SettingsCard {
         title: "Text"
-        subtitle: "Scales text in applications. Panama's own panels are drawn at their design size, so the shell is unaffected."
+        subtitle: "Scales text in applications. The shell's own panels are drawn at their design size, so they are unaffected."
 
         SliderRow { setting: "textScale"; divider: false }
     }
 
     SettingsCard {
         title: "Motion"
-        subtitle: "Panama never animates while idle. This affects motion you asked for — windows opening, workspaces sliding, panels appearing."
+        subtitle: "Nothing animates while idle. This affects motion you asked for — windows opening, workspaces sliding, panels appearing."
 
         ToggleRow { setting: "animationsEnabled"; divider: false }
     }
 
+    // Zoom, done by the compositor rather than handed to GNOME. Hyprland has a
+    // real magnifier (cursor:zoom_factor) that follows the pointer, so there is
+    // no reason to send someone to another application for it.
     SettingsCard {
-        title: "Contrast"
-        subtitle: "Unfocused windows can be faded to make the focused one obvious, or left at full strength if that is harder to read."
+        title: "Magnifier"
+        subtitle: "Magnifies the screen around the pointer. Set the magnification to 1× to turn it off."
 
-        SliderRow { setting: "inactiveOpacity"; divider: false }
+        SliderRow { setting: "magnifierFactor"; zeroLabel: "Off" }
+        ToggleRow { setting: "magnifierRigid"; divider: false }
     }
 
     SettingsCard {
-        title: "System accessibility"
-        subtitle: "Screen reader, zoom, and on-screen keyboard are provided by GNOME's accessibility stack."
+        title: "Contrast"
+        subtitle: "Unfocused windows can be faded or darkened to make the focused one obvious, or left alone if that is harder to read."
+
+        SliderRow { setting: "inactiveOpacity" }
+        ToggleRow { setting: "dimInactive" }
+        SliderRow { setting: "dimStrength"; divider: false }
+    }
+
+    // What this session genuinely cannot do, said plainly.
+    //
+    // Sticky keys, slow keys, bounce keys and mouse keys are AccessX, which is
+    // an X11 SERVER feature. XKB under Wayland has no accessx option group at
+    // all, and Hyprland does not implement one. The compositor will accept
+    // "accessx:enable" as a keyboard option and store it, and nothing will ever
+    // act on it -- so there is no switch here, and pointing at GNOME's panel
+    // would be no better, since the daemon that applies those keys is not
+    // running either.
+    SettingsCard {
+        title: "Keyboard accessibility"
+        subtitle: "Sticky, slow and bounce keys are an X11 feature with no Wayland equivalent, so they are unavailable in this session. Offering them here would store a preference that nothing acts on."
+
+        ActionRow {
+            label: "Screen reader"
+            detail: "Orca reads the screen aloud and works over the accessibility bus, which does run here"
+            action: "Start Orca"
+            onTriggered: SystemSettings.openApplication("orca")
+        }
 
         ActionRow {
             label: "GNOME accessibility settings"
-            detail: "Opens in GNOME Settings"
+            detail: "For the parts GNOME's own stack still owns"
             action: "Open"
             divider: false
             onTriggered: SystemSettings.openGnomePanel("universal-access")

config/dot/quickshell/modules/settings/AppearancePage.qml

@@ -46,7 +46,7 @@ SettingsPage {
         title: "Background"
         subtitle: Wallpaper.lastError !== ""
             ? Wallpaper.lastError
-            : "Applied to every display. Panama looks in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds."
+            : "Applied to every display. Looked for in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds."
 
         WallpaperPicker {
             id: wallpapers
@@ -184,7 +184,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Theme"
-        subtitle: "Panama has one curated visual identity rather than a matrix of partially compatible themes. The controls above adjust its parameters — how much space, how soft, how much motion — without replacing it."
+        subtitle: "This desktop has one curated visual identity rather than a matrix of partially compatible themes. The controls above adjust its parameters — how much space, how soft, how much motion — without replacing it."
 
         TextRow { label: "Color palette"; detail: "Tokyo Night Moon"; value: "Prism" }
         TextRow { label: "Interface type"; detail: "Adwaita Sans"; value: "System"; divider: false }

config/dot/quickshell/modules/settings/ApplicationsPage.qml

@@ -142,6 +142,40 @@ SettingsPage {
         }
     }
 
+    // GNOME's Search panel, answered honestly.
+    //
+    // It configures which applications provide results in gnome-shell's
+    // overview and which folders are indexed. gnome-shell does not run here,
+    // so those settings would do nothing. Under Panama searching is the
+    // launcher's job, and Vicinae carries its own preferences -- reimplementing
+    // them here would give two places to change one thing.
+    SettingsCard {
+        title: "Search"
+        subtitle: "Applications, files, the calculator, clipboard history, emoji, and open windows are all searched from the launcher."
+
+        TextRow {
+            label: "Launcher"
+            detail: SystemSettings.vicinaeActive
+                ? "Running as a user service"
+                : "Not running — Super+Shift+R opens the fallback launcher"
+            value: "Vicinae"
+        }
+
+        TextRow {
+            label: "Open search"
+            detail: "Three keys open it, because Super+A and Super+R were GNOME's app grid and run dialog"
+            value: "Super+Space"
+        }
+
+        ActionRow {
+            label: "Change these shortcuts"
+            detail: "Every launcher chord is rebindable, including clipboard history and emoji"
+            action: "Open keyboard"
+            divider: false
+            onTriggered: ShellState.openSettings("shortcuts")
+        }
+    }
+
     SettingsCard {
         title: "User autostart"
         subtitle: "These desktop entries live in your user configuration. Select a row to toggle it."
@@ -175,7 +209,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Compositor autostart"
-        subtitle: "Panama starts these from Hyprland configuration. They are read-only here."
+        subtitle: "These are started from the Hyprland configuration. They are read-only here."
 
         TextRow {
             visible: !DefaultApps.busy && DefaultApps.luaAutostartEntries.length === 0

config/dot/quickshell/modules/settings/ConnectivityPage.qml

@@ -19,13 +19,18 @@ import qs.services
 SettingsPage {
     id: root
 
+
     title: "Network & Devices"
     lede: Connectivity.activeNetwork
         ? "Connected to " + Connectivity.activeNetwork.name
         : "Wi-Fi, Bluetooth, and the things Fedora owns."
 
     // Drive the scanners only while this page is the one being shown.
-    Component.onCompleted: Connectivity.active = true
+    Component.onCompleted: {
+        Connectivity.active = true;
+        if (!WifiShare.scanned)
+            WifiShare.refresh();
+    }
     Component.onDestruction: Connectivity.active = false
 
     SettingsCard {
@@ -68,6 +73,69 @@ SettingsPage {
         }
     }
 
+    // Sharing a network by QR, the way GNOME's Wi-Fi panel does. The
+    // alternative is reading a passphrase out loud.
+    //
+    // The image holds the password in machine-readable form, so it is generated
+    // on demand rather than up front, and the helper writes it to tmpfs under
+    // XDG_RUNTIME_DIR instead of anywhere persistent.
+    SettingsCard {
+        visible: Connectivity.wifiDevice !== null && WifiShare.shareable.length > 0
+        title: "Share a network"
+        subtitle: WifiShare.sharing !== ""
+            ? "Point a phone's camera at the code to join " + WifiShare.sharing + "."
+            : "Shows a QR code a phone can scan to join, without reading the password out."
+
+        Repeater {
+            model: WifiShare.shareable
+
+            ActionRow {
+                id: shareRow
+                required property var modelData
+                required property int index
+
+                label: shareRow.modelData.ssid
+                detail: WifiShare.sharing === shareRow.modelData.name
+                    ? "Showing a code below — anyone who can see the screen can join"
+                    : "Saved network"
+                action: WifiShare.sharing === shareRow.modelData.name ? "Hide" : "Show code"
+                divider: shareRow.index < WifiShare.shareable.length - 1 || WifiShare.sharing !== ""
+                onTriggered: WifiShare.sharing === shareRow.modelData.name
+                    ? WifiShare.stopSharing()
+                    : WifiShare.share(shareRow.modelData.name)
+            }
+        }
+
+        // Drawn at its natural size on a white plate: a QR code inverted or
+        // tinted to match a dark theme is unreliable to scan, and this one has
+        // exactly one job.
+        Item {
+            width: parent.width
+            visible: WifiShare.sharing !== "" && WifiShare.imagePath !== ""
+            implicitHeight: visible ? plate.height + 20 : 0
+
+            Rectangle {
+                id: plate
+                anchors.horizontalCenter: parent.horizontalCenter
+                y: 10
+                width: 208
+                height: 208
+                radius: 10
+                color: "white"
+
+                Image {
+                    anchors.centerIn: parent
+                    width: 184
+                    height: 184
+                    smooth: false
+                    fillMode: Image.PreserveAspectFit
+                    cache: false
+                    source: WifiShare.imagePath !== "" ? "file://" + WifiShare.imagePath : ""
+                }
+            }
+        }
+    }
+
     SettingsCard {
         title: "Bluetooth"
         visible: Connectivity.adapter !== null

config/dot/quickshell/modules/settings/DesktopPage.qml

@@ -47,18 +47,16 @@ SettingsPage {
 
     SettingsCard {
         title: "Window layout"
-        subtitle: "Panama follows the Forge mental model with native Hyprland tiling."
+        subtitle: "Follows the Forge mental model, with native Hyprland tiling."
 
-        TextRow {
-            label: "Layout"
-            detail: "Dwindle with preserved split direction"
-            value: "Tiling"
-        }
-        TextRow {
-            label: "Workspace movement"
-            detail: "Alt+H / Alt+L, add Shift to move a window"
-            value: "Dynamic"
-        }
+        // These were two read-only rows reporting "Tiling" and "Dynamic", which
+        // described settings rather than facts -- both are ordinary Hyprland
+        // options that simply had no controls. TextRow's own documentation says
+        // a setting the user could reasonably change does not belong in it.
+        ChoiceRow { setting: "windowLayout" }
+        ToggleRow { setting: "preserveSplit" }
+        ChoiceRow { setting: "forceSplit" }
+        ToggleRow { setting: "windowSnapping" }
         ActionRow {
             label: "Gaps, corners, and effects"
             detail: "Adjusted on the Appearance page, beside a live preview"
@@ -68,6 +66,18 @@ SettingsPage {
         }
     }
 
+    // GNOME's Multitasking panel, in Hyprland's terms.
+    SettingsCard {
+        title: "Workspaces & focus"
+        subtitle: "Hyprland's workspaces are created and destroyed as you use them, so there is no fixed count to set."
+
+        ToggleRow { setting: "workspaceBackAndForth" }
+        ToggleRow { setting: "allowWorkspaceCycles" }
+        ToggleRow { setting: "focusOnActivate" }
+        ToggleRow { setting: "mouseMoveFocusesMonitor" }
+        ChoiceRow { setting: "followMouse"; divider: false }
+    }
+
     SettingsCard {
         title: "Focus"
 
@@ -111,10 +121,10 @@ SettingsPage {
 
     SettingsCard {
         title: "Reset"
-        subtitle: "Restores Panama's appearance, dock, clock, focus, and display policy, and clears your Home accessory arrangement. Pinned applications, files, and paired devices are not changed."
+        subtitle: "Restores the appearance, dock, clock, focus, and display policy, and clears your Home accessory arrangement. Pinned applications, files, and paired devices are not changed."
 
         ActionRow {
-            label: "Restore Panama defaults"
+            label: "Restore defaults"
             detail: "Applies immediately, including to the compositor"
             action: "Restore defaults"
             divider: false

config/dot/quickshell/modules/settings/DesktopPreview.qml

@@ -89,9 +89,12 @@ Rectangle {
             }
         }
 
+        // The real bar carries a clock here, not a name. Standing in with the
+        // actual time keeps the preview a picture of this desktop rather than
+        // a picture of a product.
         Text {
             anchors.centerIn: parent
-            text: "Panama"
+            text: Qt.formatTime(new Date(), "h:mm")
             color: Theme.alpha(Theme.fg, 0.45)
             font.family: Theme.fontFamily
             font.pixelSize: 9

config/dot/quickshell/modules/settings/DisplaysPage.qml

@@ -149,7 +149,7 @@ SettingsPage {
         ActionRow {
             visible: Displays.isOverridden(root.monitor ? root.monitor.name : "")
             label: "Using a custom display setting"
-            detail: "Forget it to go back to the resolution and scale Panama ships"
+            detail: "Forget it to go back to the shipped resolution and scale"
             action: "Forget"
             divider: false
             onTriggered: Displays.forget(root.monitor.name)
@@ -248,7 +248,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Gaming display policy"
-        subtitle: "Applied immediately and restored when Panama starts."
+        subtitle: "Applied immediately and restored when the session starts."
 
         ToggleRow { setting: "autoHdr" }
         ChoiceRow { setting: "vrrPolicy" }

config/dot/quickshell/modules/settings/HealthPage.qml

@@ -143,6 +143,7 @@ SettingsPage {
         const checkingLabels = root.descendants(root, "health-checking-label").filter(label => label.visible);
         const confirmationSheets = root.descendants(root, "health-confirmation-sheet:").filter(sheet => sheet.visible);
         const emptyGroups = root.descendants(root, "health-empty-group:").filter(label => label.visible);
+        const fedoraHandoffs = root.descendants(root, "health-fedora-handoff:").filter(row => row.visible);
         return {
             renderedRows: rows.map(row => {
                 const objectName = String(row.objectName);
@@ -162,6 +163,11 @@ SettingsPage {
             focusChain: root.renderedFocusChain(),
             activatedRows: rows.filter(row => row.actionActivationCount > 0).map(row => String(row.objectName)),
             emptyQuietGroups: emptyGroups.map(label => String(label.objectName).slice("health-empty-group:".length)),
+            fedoraHandoffs: fedoraHandoffs.map(row => ({
+                id: String(row.objectName).slice("health-fedora-handoff:".length),
+                label: row.label,
+                action: row.action
+            })),
             confirmationVisible: confirmationSheets.length === 1,
             confirmationId: confirmationSheets.length === 1
                 ? String(confirmationSheets[0].objectName).slice("health-confirmation-sheet:".length)
@@ -384,7 +390,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Fedora system settings"
-        subtitle: "Network accounts, printers, users, and Fedora updates remain owned by system tools."
+        subtitle: "These areas remain owned by Fedora and GNOME's mature system panels."
 
         Item {
             width: parent.width
@@ -415,5 +421,38 @@ SettingsPage {
                 Keys.onSpacePressed: SystemSettings.openGnomePanel("network")
             }
         }
+
+        ActionRow {
+            objectName: "health-fedora-handoff:users"
+            label: "Users"
+            detail: "Accounts, passwords, and automatic login"
+            action: "Open users"
+            onTriggered: SystemSettings.openGnomePanel("system", "users")
+        }
+
+        ActionRow {
+            objectName: "health-fedora-handoff:sharing"
+            label: "Sharing"
+            detail: "Remote desktop, media sharing, and remote login"
+            action: "Open sharing"
+            onTriggered: SystemSettings.openGnomePanel("sharing")
+        }
+
+        ActionRow {
+            objectName: "health-fedora-handoff:color"
+            label: "Colour profiles"
+            detail: "ICC profiles for displays, printers, and scanners"
+            action: "Open colour"
+            onTriggered: SystemSettings.openGnomePanel("color")
+        }
+
+        ActionRow {
+            objectName: "health-fedora-handoff:wellbeing"
+            label: "Digital wellbeing"
+            detail: "Screen time and break reminders"
+            action: "Open wellbeing"
+            divider: false
+            onTriggered: SystemSettings.openGnomePanel("wellbeing")
+        }
     }
 }

config/dot/quickshell/modules/settings/HomePage.qml

@@ -9,7 +9,7 @@ SettingsPage {
     readonly property string greeting: openedHour < 12 ? "Good morning" : (openedHour < 18 ? "Good afternoon" : "Good evening")
 
     title: `${root.greeting}, Gabriel`
-    lede: "Your Panama desktop is configured and ready."
+    lede: "Your desktop is configured and ready."
 
     SettingsCard {
         title: SystemSettings.monitorDescription || "Active display"

config/dot/quickshell/modules/settings/HomePhonePage.qml

@@ -202,7 +202,7 @@ SettingsPage {
 
         SettingRow {
             label: "Private configuration"
-            detail: "Saved with owner-only permissions in Panama's private environment file"
+            detail: "Saved with owner-only permissions in a private environment file"
             controlWidth: 216
 
             Row {
@@ -239,7 +239,7 @@ SettingsPage {
 
         SettingRow {
             label: "Light catalog"
-            detail: "Panama reads light state through the Home Assistant helper."
+            detail: "Light state is read through the Home Assistant helper."
             divider: false
             controlWidth: 176
 

config/dot/quickshell/modules/settings/MousePage.qml

@@ -0,0 +1,57 @@
+// Mouse & Touchpad.
+//
+// GNOME splits pointing devices out of Keyboard, and so does this: the settings
+// are unrelated, and burying pointer speed under a page called "Shortcuts" is
+// where it was before. These all reach Hyprland's input section, which until now
+// could only be changed by editing hypr/input.lua by hand.
+//
+// The touchpad card renders only when a touchpad is attached. On a desktop it
+// would be worse than useless -- every switch on it appears to work, because the
+// preference is stored and the compositor accepts an option for a device class
+// with no members, so the user would be toggling settings that can never affect
+// anything with nothing to say so.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SettingsPage {
+    id: root
+
+    title: "Mouse & Touchpad"
+    lede: InputDevices.hasTouchpad
+        ? "Pointer behaviour for your mouse and touchpad."
+        : "Pointer behaviour. Touchpad settings appear when a touchpad is attached."
+
+    SettingsCard {
+        title: "Mouse"
+        subtitle: "Applied to every pointing device that is not a touchpad."
+
+        SliderRow { setting: "pointerSensitivity" }
+        ChoiceRow { setting: "accelProfile" }
+        ToggleRow { setting: "naturalScroll" }
+        SliderRow { setting: "scrollFactor" }
+        ToggleRow { setting: "leftHanded"; divider: false }
+    }
+
+    SettingsCard {
+        visible: InputDevices.hasTouchpad
+        title: "Touchpad"
+        subtitle: "Separate from the mouse on purpose: libinput keeps them apart, and a touchpad and a mouse usually want to scroll in opposite directions."
+
+        ToggleRow { setting: "touchpadTapToClick" }
+        ToggleRow { setting: "touchpadNaturalScroll" }
+        ToggleRow { setting: "touchpadDisableWhileTyping" }
+        SliderRow { setting: "touchpadScrollFactor" }
+        ChoiceRow { setting: "touchpadDragLock" }
+        ToggleRow { setting: "touchpadMiddleButtonEmulation"; divider: false }
+    }
+
+    SettingsCard {
+        title: "Pointer"
+
+        ChoiceRow { setting: "followMouse" }
+        SliderRow { setting: "cursorInactiveTimeout"; zeroLabel: "Never" }
+        SliderRow { setting: "cursorSize"; divider: false }
+    }
+}

config/dot/quickshell/modules/settings/NotificationsPage.qml

@@ -24,7 +24,7 @@ SettingsPage {
 
         TextRow {
             label: "Notification history"
-            detail: "Live notifications retained by Panama"
+            detail: "Live notifications retained by the shell"
             value: `${Notifs.history.length} items`
         }
 

config/dot/quickshell/modules/settings/OnlineAccountsPage.qml

@@ -0,0 +1,122 @@
+// Online Accounts.
+//
+// GNOME's panel of the same name, except for one step. The accounts are GNOME
+// Online Accounts objects on D-Bus, the daemon already runs here, and listing,
+// per-service toggles and removal are all done natively on this page.
+//
+// Signing in to an OAuth provider is handed to GNOME's panel, because the
+// credentials are OAuth tokens and the code that obtains them ships without a
+// scriptable binding. That is stated on the page rather than hidden behind a
+// button that looks native, because a hand-off the user does not expect reads
+// as a bug.
+//
+// Accounts needing attention are surfaced first. GOA knows when a token has
+// expired and nothing outside its own panel says so, which is how an account
+// quietly stops syncing for weeks.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SettingsPage {
+    id: root
+
+    title: "Online Accounts"
+    lede: OnlineAccounts.attentionCount > 0
+        ? OnlineAccounts.attentionCount + (OnlineAccounts.attentionCount === 1
+            ? " account needs you to sign in again."
+            : " accounts need you to sign in again.")
+        : "Accounts your mail, calendar, contacts, and files come from."
+
+    Component.onCompleted: if (!OnlineAccounts.scanned) OnlineAccounts.refresh()
+
+    SettingsCard {
+        visible: !OnlineAccounts.available
+        title: "Accounts unavailable"
+        subtitle: OnlineAccounts.lastError
+    }
+
+    SettingsCard {
+        visible: OnlineAccounts.scanned && OnlineAccounts.available && OnlineAccounts.accounts.length === 0
+        title: "No accounts yet"
+        subtitle: "Adding one lets mail, calendar, contacts, and file managers share a single sign-in."
+
+        ActionRow {
+            label: "Add an account"
+            detail: "Google, Nextcloud, Microsoft Exchange, IMAP, WebDAV, and Kerberos"
+            action: "Add account"
+            divider: false
+            onTriggered: SystemSettings.openGnomePanel("online-accounts")
+        }
+    }
+
+    Repeater {
+        model: OnlineAccounts.accounts
+
+        SettingsCard {
+            id: accountCard
+            required property var modelData
+
+            title: accountCard.modelData.identity || accountCard.modelData.providerName
+            subtitle: accountCard.modelData.needsAttention
+                ? accountCard.modelData.providerName + " · sign-in expired, so this account has stopped syncing"
+                : accountCard.modelData.providerName
+
+            // Only when it is true, because it is the one thing on this page
+            // that needs acting on.
+            ActionRow {
+                visible: accountCard.modelData.needsAttention
+                label: "Sign in again"
+                detail: "Re-authorising uses the provider's own sign-in page, which GNOME's panel hosts"
+                action: "Sign in"
+                onTriggered: SystemSettings.openGnomePanel("online-accounts")
+            }
+
+            Repeater {
+                model: accountCard.modelData.services
+
+                SettingRow {
+                    id: serviceRow
+                    required property var modelData
+                    required property int index
+
+                    label: serviceRow.modelData.label
+                    detail: serviceRow.modelData.enabled
+                        ? "Applications using " + serviceRow.modelData.label.toLowerCase() + " can see this account"
+                        : "Hidden from applications"
+                    controlWidth: 48
+
+                    SettingsToggle {
+                        anchors.right: parent.right
+                        anchors.verticalCenter: parent.verticalCenter
+                        checked: serviceRow.modelData.enabled
+                        onToggled: value => OnlineAccounts.setService(
+                            accountCard.modelData.path, serviceRow.modelData.key, value)
+                    }
+                }
+            }
+
+            ActionRow {
+                label: "Remove this account"
+                detail: "Signs out and removes it from every application that was using it"
+                action: "Remove"
+                divider: false
+                onTriggered: OnlineAccounts.remove(accountCard.modelData.path)
+            }
+        }
+    }
+
+    SettingsCard {
+        visible: OnlineAccounts.available && OnlineAccounts.accounts.length > 0
+        title: "Add another account"
+        subtitle: "Signing in happens on the provider's own page. GNOME's panel hosts that step; everything after it is managed here."
+
+        ActionRow {
+            label: "Add an account"
+            detail: "Google, Nextcloud, Microsoft Exchange, IMAP, WebDAV, and Kerberos"
+            action: "Add account"
+            divider: false
+            onTriggered: SystemSettings.openGnomePanel("online-accounts")
+        }
+    }
+}

config/dot/quickshell/modules/settings/PowerPage.qml

@@ -14,14 +14,48 @@ import qs.services
 SettingsPage {
     id: root
 
+    // Probing the power daemon is a D-Bus round trip, so it happens when the
+    // page opens rather than at shell startup.
+    Component.onCompleted: if (!PowerProfiles.scanned) PowerProfiles.refresh()
+
     title: "Power & Lock"
     lede: "When the screen turns off, when the session locks, and whether it ever sleeps."
 
+    // The same profiles GNOME's Power panel offers. Not a stored preference --
+    // the daemon owns it, it survives Panama restarts, and anything else on the
+    // system can change it, so a copy here would drift.
+    SettingsCard {
+        visible: PowerProfiles.available || PowerProfiles.lastError !== ""
+        title: "Power profile"
+        subtitle: PowerProfiles.degraded !== ""
+            ? "Performance is limited right now: " + PowerProfiles.degraded
+            : (PowerProfiles.available
+                ? "Applies to the whole system and persists across sessions."
+                : PowerProfiles.lastError)
+
+        Repeater {
+            model: PowerProfiles.profiles
+
+            SettingRow {
+                id: profileRow
+                required property var modelData
+                required property int index
+
+                label: PowerProfiles.label(profileRow.modelData)
+                detail: PowerProfiles.detail(profileRow.modelData)
+                value: profileRow.modelData === PowerProfiles.active ? "Active" : ""
+                divider: profileRow.index < PowerProfiles.profiles.length - 1
+                activatable: profileRow.modelData !== PowerProfiles.active && !PowerProfiles.busy
+                onActivated: PowerProfiles.set(profileRow.modelData)
+            }
+        }
+    }
+
     SettingsCard {
         title: "Idle behaviour"
         subtitle: IdleLock.managed
-            ? "Panama is managing hypridle. Changes take effect immediately."
-            : "hypridle is running Panama's shipped configuration. Turn on management below to make these adjustable."
+            ? "Idle timings are managed here. Changes take effect immediately."
+            : "hypridle is running its shipped configuration. Turn on management below to make these adjustable."
 
         SliderRow { setting: "screenBlankMinutes"; zeroLabel: "Never" }
         SliderRow { setting: "lockMinutes"; zeroLabel: "Never" }
@@ -41,10 +75,10 @@ SettingsPage {
 
     SettingsCard {
         title: "Management"
-        subtitle: "Panama generates hypridle's configuration into your state directory and points the service at it with a systemd drop-in. ~/.config/hypr is a symlink into the Panama repository, so the shipped configuration cannot be rewritten in place."
+        subtitle: "hypridle's configuration is generated into your state directory and the service is pointed at it with a systemd drop-in. ~/.config/hypr is a symlink into the configuration repository, so the shipped file cannot be rewritten in place."
 
         SettingRow {
-            label: "Let Panama manage idle timings"
+            label: "Manage idle timings here"
             detail: IdleLock.serviceState === "active"
                 ? "hypridle is running"
                 : "hypridle is " + IdleLock.serviceState

config/dot/quickshell/modules/settings/PrivacyPage.qml

@@ -0,0 +1,166 @@
+// Privacy & Security.
+//
+// GNOME's Privacy panel covers screen lock, camera and microphone access, file
+// history, trash, and device security. Panama covers the parts it genuinely
+// owns and is explicit about the parts it does not.
+//
+// The file-history and trash settings are the notable omission, and the reason
+// is worth stating: those are GNOME preferences enforced by gsd-housekeeping,
+// which is not running in a Hyprland session. Offering switches for them would
+// store a preference, change nothing, and give no sign of it -- the exact
+// failure this codebase keeps designing against. So they are delegated by name
+// rather than reimplemented as controls that lie.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SettingsPage {
+    id: root
+
+    title: "Privacy & Security"
+    lede: DeviceSecurity.scanned && DeviceSecurity.attentionCount === 0
+        ? "Screen lock, device access, and a machine whose security settings all check out."
+        : "Screen lock, which applications can see you, and how this machine is protected."
+
+    Component.onCompleted: {
+        if (!DeviceSecurity.scanned)
+            DeviceSecurity.refresh();
+        if (!Keyring.scanned)
+            Keyring.refresh();
+    }
+
+    SettingsCard {
+        title: "Screen lock"
+        subtitle: "The same settings as Power & Lock, which is where the idle timings live."
+
+        SliderRow { setting: "lockMinutes"; zeroLabel: "Never" }
+        ToggleRow { setting: "lockOnSleep"; divider: false }
+    }
+
+    // The login keyring, which nothing else surfaces.
+    //
+    // It is unlocked at sign-in by PAM, so this card normally just confirms
+    // that. It earns its place on the rare occasion it is not: a locked keyring
+    // breaks saved passwords everywhere at once, and does it without ever
+    // saying the word "keyring" -- you get a mail account that will not
+    // authenticate and a git push that cannot find its key.
+    SettingsCard {
+        visible: Keyring.scanned
+        title: "Saved passwords"
+        subtitle: !Keyring.available
+            ? "No secret service is answering, so saved passwords are unavailable."
+            : Keyring.locked
+                ? "The login keyring is locked. Saved passwords cannot be read until it is unlocked, and applications that need one will appear to fail for unrelated reasons."
+                : "The login keyring is unlocked, as it is after every normal sign-in."
+
+        // Two rows rather than one with a conditional button: a locked keyring
+        // needs an action, an unlocked one is a statement of fact, and ActionRow
+        // and TextRow already say exactly those two things.
+        ActionRow {
+            visible: Keyring.available && Keyring.locked
+            label: "Login keyring"
+            detail: "Unlock to restore access to stored passwords and keys"
+            action: Keyring.unlocking ? "Waiting…" : "Unlock"
+            enabled: !Keyring.unlocking
+            divider: Keyring.replacementDaemon || Keyring.lastError !== ""
+            onTriggered: Keyring.unlock()
+        }
+
+        TextRow {
+            visible: !(Keyring.available && Keyring.locked)
+            label: "Login keyring"
+            detail: Keyring.available
+                ? "Unlocked at sign-in by PAM, the same way GNOME does it"
+                : "No secret service is answering on this session"
+            value: Keyring.available ? "Unlocked" : "Unavailable"
+            divider: Keyring.replacementDaemon || Keyring.lastError !== ""
+        }
+
+        // Only shown when it is true, because it is a diagnostic rather than a
+        // setting: it means the daemon holding your secrets is not the one PAM
+        // started, so whatever unlocked it will not survive a restart.
+        SettingRow {
+            visible: Keyring.replacementDaemon
+            label: "Keyring service"
+            detail: "The original keyring service was replaced during this session, usually after it crashed. Signing out and back in restores the one PAM unlocks."
+            value: "Replaced"
+            divider: Keyring.lastError !== ""
+        }
+
+        SettingRow {
+            visible: Keyring.lastError !== ""
+            label: "Keyring problem"
+            detail: Keyring.lastError
+            divider: false
+        }
+    }
+
+    SettingsCard {
+        title: "Camera & microphone"
+        subtitle: PrivacyState.anyActive
+            ? "In use right now — the bar shows an indicator whenever this is true."
+            : "Nothing is using your camera or microphone."
+
+        TextRow {
+            label: "Camera"
+            detail: PrivacyState.cameraActive
+                ? "In use by " + (PrivacyState.cameraApp || "an application")
+                : "Not in use"
+            value: PrivacyState.cameraActive ? "Active" : "Idle"
+        }
+
+        TextRow {
+            label: "Microphone"
+            detail: PrivacyState.microphoneActive
+                ? "In use by " + (PrivacyState.microphoneApp || "an application")
+                : "Not in use"
+            value: PrivacyState.microphoneActive ? "Active" : "Idle"
+        }
+
+        TextRow {
+            label: "Screen sharing"
+            detail: PrivacyState.screenSharingActive
+                ? "Being shared by " + (PrivacyState.screenSharingApp || "an application")
+                : "Not being shared"
+            value: PrivacyState.screenSharingActive ? "Active" : "Idle"
+            divider: false
+        }
+    }
+
+    SettingsCard {
+        title: "Device security"
+        subtitle: DeviceSecurity.attentionCount === 0
+            ? "Everything below is in its recommended state."
+            : DeviceSecurity.attentionCount + " item"
+              + (DeviceSecurity.attentionCount === 1 ? "" : "s") + " below may deserve attention."
+
+        Repeater {
+            model: DeviceSecurity.facts
+
+            TextRow {
+                id: factRow
+                required property var modelData
+                required property int index
+
+                label: factRow.modelData.label
+                detail: factRow.modelData.detail
+                value: factRow.modelData.value
+                divider: factRow.index < DeviceSecurity.facts.length - 1
+            }
+        }
+    }
+
+    SettingsCard {
+        title: "Owned by Fedora"
+        subtitle: "File history and trash retention are GNOME preferences, applied by a housekeeping service that does not run in a Hyprland session. They are not offered as switches here, because storing that preference would change nothing."
+
+        ActionRow {
+            label: "File history & trash"
+            detail: "Opens GNOME Settings, which owns these"
+            action: "Open privacy"
+            divider: false
+            onTriggered: SystemSettings.openGnomePanel("privacy")
+        }
+    }
+}

config/dot/quickshell/modules/settings/README.md

@@ -1,4 +1,4 @@
-# Panama Settings
+# Settings
 
 The control centre for everything Panama owns. Anything the system owns —
 hardware, accounts, printers — is delegated to GNOME Settings and labelled as

config/dot/quickshell/modules/settings/RegionPage.qml

@@ -0,0 +1,75 @@
+// Region & Language.
+//
+// GNOME keeps language and formats under System; the setting itself is the
+// machine's locale, which localectl owns. Panama does not store a copy of it --
+// there is exactly one system locale and localectl is where it lives, so a
+// preference here would be a second source of truth that drifts the moment
+// anything else changes it.
+//
+// Keyboard layout is deliberately not repeated here even though GNOME groups it
+// with region. It is a compositor setting that applies instantly, it lives on
+// the Keyboard page with the rest of the typing settings, and showing it twice
+// invites the two views to disagree.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SettingsPage {
+    id: root
+
+    title: "Region & Language"
+    lede: SystemLocale.pendingRestart
+        ? "Your new language applies to programs started after you sign out and back in."
+        : "The language and regional formats this machine uses."
+
+    Component.onCompleted: if (SystemLocale.locales.length === 0) SystemLocale.refresh()
+
+    SettingsCard {
+        title: "Language"
+        subtitle: "Changing this needs your password, and takes effect for programs started afterwards."
+
+        TextRow {
+            label: "Current language"
+            detail: SystemLocale.pendingRestart
+                ? "Chosen, but not in use until you sign out and back in"
+                : "Used by programs that ask the system what language to speak"
+            value: SystemLocale.currentLabel || "Reading…"
+        }
+
+        SearchPicker {
+            width: parent.width
+            items: SystemLocale.locales
+            current: SystemLocale.current
+            placeholder: "Search languages and regions"
+            emptyText: SystemLocale.scanning ? "Reading installed locales…" : "No locales are installed"
+            onPicked: value => SystemLocale.set(value)
+        }
+    }
+
+    SettingsCard {
+        visible: SystemLocale.lastError !== ""
+        title: "Language problem"
+        subtitle: SystemLocale.lastError
+    }
+
+    SettingsCard {
+        title: "Formats"
+        subtitle: "Dates, times, and numbers follow the language above. The desktop's own clock formatting is on the Appearance page."
+
+        ActionRow {
+            label: "Clock and date display"
+            detail: "How the desktop itself shows the time"
+            action: "Open appearance"
+            onTriggered: ShellState.openSettings("appearance")
+        }
+
+        ActionRow {
+            label: "Regional formats"
+            detail: "Separate per-category formats (LC_TIME, LC_NUMERIC) are owned by Fedora"
+            action: "Open system"
+            divider: false
+            onTriggered: SystemSettings.openGnomePanel("system", "region")
+        }
+    }
+}

config/dot/quickshell/modules/settings/ScreenIntelligencePage.qml

@@ -18,7 +18,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Read anything on screen"
-        subtitle: "Select a region, window, or display. Panama recognizes it locally and gives you clean follow-up actions."
+        subtitle: "Select a region, window, or display. It is recognized locally, with clean follow-up actions."
 
         SettingRow {
             icon: "󰗊"
@@ -52,7 +52,7 @@ SettingsPage {
 
     SettingsCard {
         title: "Local recognition"
-        subtitle: "The screen image stays in Panama's cache and is deleted when you dismiss the result."
+        subtitle: "The screen image stays in a local cache and is deleted when you dismiss the result."
 
         TextRow {
             label: "Text recognition"

config/dot/quickshell/modules/settings/SearchPicker.qml

@@ -0,0 +1,94 @@
+// A searchable list of choices, for settings with far too many values to put in
+// a dropdown and no useful preview to show.
+//
+//   SearchPicker {
+//       items: Locale.locales          // [{ value, label, detail }]
+//       current: Locale.current
+//       placeholder: "Search languages"
+//       onPicked: value => Locale.set(value)
+//   }
+//
+// FontPicker is the same idea specialised: it draws each candidate in its own
+// family, which is the whole reason it is a list rather than a text field. This
+// one is for choices whose only useful preview is their name.
+
+import QtQuick
+import qs.config
+// SearchField lives with the clipboard module, which is where it was first
+// needed; FontPicker imports it from the same place.
+import qs.modules.clipboard
+
+Column {
+    id: root
+
+    // [{ value, label, detail }]
+    property var items: []
+    property string current: ""
+    property string emptyText: "Nothing to choose from"
+    property string placeholder: "Search"
+
+    signal picked(string value)
+
+    spacing: 0
+
+    // Capped and filtered rather than listing everything: 327 locales inside a
+    // page that is already scrolling is worse than a search box.
+    readonly property var matches: {
+        const needle = filter.text.trim().toLowerCase();
+        const list = root.items.filter(item =>
+            needle === ""
+                ? true
+                : (String(item.label).toLowerCase().indexOf(needle) >= 0
+                   || String(item.detail).toLowerCase().indexOf(needle) >= 0));
+
+        // The current choice stays visible while browsing, so it is always
+        // clear what would be replaced.
+        const selected = list.find(item => item.value === root.current);
+        if (needle === "" && selected !== undefined)
+            return [selected].concat(list.filter(item => item.value !== root.current)).slice(0, 12);
+        return list.slice(0, 12);
+    }
+
+    SearchField {
+        id: filter
+        width: parent.width
+        placeholder: root.placeholder
+    }
+
+    Repeater {
+        model: root.matches
+
+        SettingRow {
+            id: candidate
+
+            required property var modelData
+            required property int index
+
+            readonly property bool selected: candidate.modelData.value === root.current
+
+            label: candidate.modelData.label
+            detail: candidate.selected ? "Currently in use" : candidate.modelData.detail
+            controlWidth: 120
+            divider: candidate.index < root.matches.length - 1
+            activatable: !candidate.selected
+            onActivated: root.picked(candidate.modelData.value)
+
+            Text {
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+                visible: candidate.selected
+                text: "✓"
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSize + 2
+                color: Theme.accent
+            }
+        }
+    }
+
+    SettingRow {
+        width: parent.width
+        visible: root.matches.length === 0
+        label: root.emptyText
+        divider: false
+    }
+}

config/dot/quickshell/modules/settings/SettingsShell.qml

@@ -53,7 +53,7 @@ Rectangle {
             anchors.left: parent.left
             anchors.leftMargin: 18
             anchors.verticalCenter: parent.verticalCenter
-            text: "Panama Settings"
+            text: "Settings"
             color: Theme.fg
             font.family: Theme.fontFamily
             font.pixelSize: Theme.fontSize
@@ -112,6 +112,10 @@ Rectangle {
             case "notifications": return notificationsPage;
             case "screen-intelligence": return screenIntelligencePage;
             case "shortcuts": return shortcutsPage;
+            case "mouse": return mousePage;
+            case "privacy": return privacyPage;
+            case "region": return regionPage;
+            case "accounts": return onlineAccountsPage;
             case "accessibility": return accessibilityPage;
             case "power": return powerPage;
             case "datetime": return dateTimePage;
@@ -166,6 +170,10 @@ Rectangle {
     Component { id: notificationsPage; NotificationsPage {} }
     Component { id: screenIntelligencePage; ScreenIntelligencePage {} }
     Component { id: shortcutsPage; ShortcutsPage {} }
+    Component { id: mousePage; MousePage {} }
+    Component { id: privacyPage; PrivacyPage {} }
+    Component { id: regionPage; RegionPage {} }
+    Component { id: onlineAccountsPage; OnlineAccountsPage {} }
     Component { id: healthPage; HealthPage {} }
     Component { id: aboutPage; AboutPage {} }
 

config/dot/quickshell/modules/settings/SettingsSidebar.qml

@@ -31,13 +31,17 @@ Rectangle {
         { page: "sound", label: "Sound", icon: "\u{F057E}" },
         { page: "notifications", label: "Notifications & Focus", icon: "\u{F009A}" },
         { page: "screen-intelligence", label: "Screen Intelligence", icon: "\u{F05A8}" },
-        { page: "shortcuts", label: "Input & Shortcuts", icon: "\u{F030C}" },
+        { page: "shortcuts", label: "Keyboard", icon: "\u{F030C}" },
+        { page: "mouse", label: "Mouse & Touchpad", icon: "\u{F037D}" },
+        { page: "privacy", label: "Privacy & Security", icon: "\u{F0483}" },
+        { page: "region", label: "Region & Language", icon: "\u{F0AC2}" },
+        { page: "accounts", label: "Online Accounts", icon: "\u{F0004}" },
         { page: "accessibility", label: "Accessibility", icon: "\u{F0208}" },
         { page: "power", label: "Power & Lock", icon: "\u{F0425}" },
         { page: "datetime", label: "Date & Time", icon: "\u{F0954}" },
         { page: "applications", label: "Applications", icon: "\u{F003B}" },
         { page: "services", label: "System Health", icon: "\u{F0493}" },
-        { page: "about", label: "About Panama", icon: "\u{F02FD}" }
+        { page: "about", label: "About", icon: "\u{F02FD}" }
     ]
 
     width: 272
@@ -56,15 +60,6 @@ Rectangle {
         height: implicitHeight
         spacing: 12
 
-        Text {
-            text: "PANAMA"
-            color: Theme.fg
-            font.family: Theme.fontFamily
-            font.pixelSize: Theme.fontSizeLarge
-            font.weight: Font.DemiBold
-            font.letterSpacing: 2.2
-        }
-
         Rectangle {
             width: parent.width
             height: 36

config/dot/quickshell/modules/settings/SettingsWindow.qml

@@ -8,7 +8,7 @@ FloatingWindow {
 
     readonly property var homePhoneDiagnostics: settingsShell.homePhoneDiagnostics
 
-    title: "Panama Settings"
+    title: "Settings"
     visible: ShellState.settingsOpen
     implicitWidth: 1120
     implicitHeight: 760

config/dot/quickshell/modules/settings/ShortcutsPage.qml

@@ -28,24 +28,19 @@ SettingsPage {
     SettingsCard {
         title: "Keyboard"
 
-        TextRow {
-            label: "Keyboard layout"
-            detail: "XKB layout name. Changing it needs a compositor reload, so it is shown here rather than offered as a control that appears to apply instantly."
-            value: Settings ? DesktopPreferences.get("keyboardLayout") : "us"
-        }
+        // These were read-only text, on the grounds that a layout change needed
+        // a compositor reload. It does not: setting input:kb_variant through
+        // hl.config re-keymaps attached keyboards immediately -- verified by
+        // watching active_keymap on a real keyboard change and change back. So
+        // they are real controls.
+        TextEntryRow { setting: "keyboardLayout"; placeholder: "us" }
+        TextEntryRow { setting: "keyboardVariant"; placeholder: "none" }
+        TextEntryRow { setting: "keyboardOptions"; placeholder: "compose:ralt" }
         SliderRow { setting: "keyRepeatDelay" }
         SliderRow { setting: "keyRepeatRate" }
         ToggleRow { setting: "numlockByDefault"; divider: false }
     }
 
-    SettingsCard {
-        title: "Pointer"
-
-        ChoiceRow { setting: "followMouse" }
-        SliderRow { setting: "pointerSensitivity" }
-        SliderRow { setting: "cursorInactiveTimeout"; zeroLabel: "Never"; divider: false }
-    }
-
     SettingsCard {
         title: "Hardware input"
 
@@ -155,7 +150,7 @@ SettingsPage {
     SettingsCard {
         visible: Object.keys(Keybinds.overrides).length > 0
         title: "Changed shortcuts"
-        subtitle: "Rebinding stores only the new chord; what a shortcut does always comes from Panama's configuration."
+        subtitle: "Rebinding stores only the new chord; what a shortcut does always comes from the desktop's configuration."
 
         ActionRow {
             label: "Restore every shipped shortcut"

config/dot/quickshell/modules/settings/TextEntryRow.qml

@@ -0,0 +1,109 @@
+// A free-text setting, bound to a schema key by name.
+//
+//   TextEntryRow { setting: "keyboardOptions"; placeholder: "compose:ralt" }
+//
+// For the settings whose value is a short string with too many legal values to
+// enumerate -- XKB layouts and options, chiefly. Label, explanation, and
+// validation all come from PreferenceSchema, so a row cannot drift from the
+// setting it edits.
+//
+// Rejected input is shown as rejected rather than silently dropped or quietly
+// sanitised. Several of these strings are serialised into an hl.config payload,
+// where stripping an unexpected character would turn a typo into a different
+// working setting -- so the schema's pattern decides, the field turns red when
+// it fails, and nothing is committed until it passes.
+//
+// Committed on Enter or when focus leaves, not per keystroke: half a layout
+// name is a valid string that means something else, and each commit is a round
+// trip to the compositor.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SettingRow {
+    id: root
+
+    required property string setting
+    property string placeholder: ""
+
+    readonly property var spec: PreferenceSchema.spec(root.setting)
+    readonly property string stored: String(DesktopPreferences.get(root.setting) ?? "")
+
+    // Empty is always allowed to be typed through, even where the pattern
+    // forbids it, so a field can be cleared on the way to a new value.
+    readonly property bool valid: input.text === ""
+        || !root.spec?.pattern
+        || new RegExp(root.spec.pattern).test(input.text)
+
+    label: root.spec ? root.spec.label : root.setting
+    detail: root.spec ? root.spec.detail : ""
+    controlWidth: 210
+
+    function commit(): void {
+        if (!root.valid || input.text === root.stored)
+            return;
+        SystemSettings.commitPreference(root.setting, input.text);
+    }
+
+    function revert(): void {
+        input.text = root.stored;
+    }
+
+    // Follows the store when the value changes elsewhere -- a reset, a restored
+    // backup -- but never while the field has focus, which would overwrite what
+    // is being typed.
+    onStoredChanged: if (!input.activeFocus) input.text = root.stored
+
+    Rectangle {
+        anchors.right: parent.right
+        anchors.verticalCenter: parent.verticalCenter
+        width: root.controlWidth
+        height: 30
+        radius: 8
+        color: Theme.alpha(Theme.fg, 0.05)
+        border.width: 1
+        border.color: !root.valid
+            ? Theme.danger
+            : (input.activeFocus ? Theme.accent : Theme.alpha(Theme.fg, 0.12))
+
+        TextInput {
+            id: input
+
+            anchors.fill: parent
+            anchors.leftMargin: 10
+            anchors.rightMargin: 10
+            verticalAlignment: TextInput.AlignVCenter
+            clip: true
+
+            text: root.stored
+            color: root.valid ? Theme.fg : Theme.danger
+            font.family: Theme.fontMono
+            font.pixelSize: Theme.fontSizeSmall
+            selectByMouse: true
+            selectionColor: Theme.alpha(Theme.accent, 0.35)
+
+            onAccepted: root.commit()
+
+            // Commit, then show what is actually stored. If the compositor
+            // refused the value, the field snaps back to the value in effect
+            // rather than displaying a setting that was never applied; if it
+            // accepted, onStoredChanged brings the field back up to date the
+            // moment the write lands.
+            onActiveFocusChanged: if (!activeFocus) { root.commit(); root.revert(); }
+
+            Keys.onEscapePressed: {
+                root.revert();
+                input.focus = false;
+            }
+
+            Text {
+                anchors.verticalCenter: parent.verticalCenter
+                visible: input.text === "" && !input.activeFocus
+                text: root.placeholder
+                color: Theme.fgMuted
+                font: input.font
+            }
+        }
+    }
+}

config/dot/quickshell/modules/settings/WallpaperPicker.qml

@@ -156,7 +156,7 @@ Item {
         width: parent.width - 40
         horizontalAlignment: Text.AlignHCenter
         wrapMode: Text.WordWrap
-        text: "No images found. Panama looks in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds."
+        text: "No images found. Looked in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds."
         color: Theme.fgMuted
         font.family: Theme.fontFamily
         font.pixelSize: Theme.fontSizeSmall

config/dot/quickshell/modules/settings/qmldir

@@ -48,3 +48,9 @@ SoundDeviceRow 1.0 SoundDeviceRow.qml
 TimeOfDayRow 1.0 TimeOfDayRow.qml
 LocationPicker 1.0 LocationPicker.qml
 FontPicker 1.0 FontPicker.qml
+MousePage 1.0 MousePage.qml
+TextEntryRow 1.0 TextEntryRow.qml
+PrivacyPage 1.0 PrivacyPage.qml
+RegionPage 1.0 RegionPage.qml
+SearchPicker 1.0 SearchPicker.qml
+OnlineAccountsPage 1.0 OnlineAccountsPage.qml

config/dot/quickshell/scripts/panama-about

@@ -0,0 +1,127 @@
+#!/usr/bin/env bash
+
+# What this machine is, as JSON: {label, value} pairs in display order.
+#
+# GNOME's About panel answers "what am I running on" in one screen, and
+# fastfetch answers it in more detail; this covers both -- model, OS, kernel,
+# uptime, package counts, shell, resolution, processor, memory, swap, disk and
+# locale. Rows are ordered roughly the way fastfetch presents them: what the
+# system is, then what is installed on it, then the hardware underneath.
+#
+# Graphics is deliberately absent: GraphicsDevices already enumerates GPUs for
+# the vitals readout, and naming them again here would be a second source of
+# truth that could disagree with the first. The page joins the two.
+#
+# Anything unreadable is omitted rather than reported as "Unknown". These are
+# facts about hardware, and a row saying "Processor: Unknown" is noise where
+# simply not having the row is not.
+
+set -uo pipefail
+
+facts=()
+
+emit() {
+    [[ -n "${2:-}" ]] || return 0
+    facts+=("$(jq -cn --arg label "$1" --arg value "$2" '{label: $label, value: $value}')")
+}
+
+# ── System ───────────────────────────────────────────────────────────────────
+if [[ -r /etc/os-release ]]; then
+    # Sourced in a subshell so the variables cannot leak into this script.
+    os="$( . /etc/os-release 2>/dev/null && printf '%s' "${PRETTY_NAME:-$NAME}" )"
+    emit "Operating system" "$os"
+fi
+
+# DMI strings are frequently placeholders ("To Be Filled By O.E.M.", "Default
+# string"). Those are worse than nothing, so they are filtered out.
+dmi() {
+    local value
+    value="$(cat "/sys/class/dmi/id/$1" 2>/dev/null)" || return 0
+    case "$value" in
+        ""|"To Be Filled By O.E.M."*|"Default string"|"System Product Name"|"Unknown"|"None") return 0 ;;
+    esac
+    printf '%s' "$value"
+}
+
+vendor="$(dmi sys_vendor)"
+product="$(dmi product_name)"
+if [[ -n "$vendor" && -n "$product" ]]; then
+    emit "Model" "$vendor $product"
+else
+    emit "Model" "${product:-$vendor}"
+fi
+
+emit "Hostname" "$(hostnamectl hostname 2>/dev/null || hostname 2>/dev/null)"
+emit "Kernel" "$(uname -r 2>/dev/null)"
+
+# `uptime -p` already reads as prose ("1 week, 23 hours, 5 minutes"); only the
+# leading "up " needs removing.
+emit "Uptime" "$(uptime -p 2>/dev/null | sed 's/^up //')"
+
+# ── Installed ────────────────────────────────────────────────────────────────
+# Counted rather than listed. rpm -qa on a full workstation is a few thousand
+# lines and takes a moment, which is part of why this whole helper runs on
+# demand rather than at startup.
+packages=""
+if command -v rpm >/dev/null 2>&1; then
+    rpm_count="$(rpm -qa 2>/dev/null | wc -l)"
+    [[ "$rpm_count" -gt 0 ]] && packages="$rpm_count rpm"
+fi
+if command -v flatpak >/dev/null 2>&1; then
+    flatpak_count="$(flatpak list --app 2>/dev/null | wc -l)"
+    if [[ "$flatpak_count" -gt 0 ]]; then
+        [[ -n "$packages" ]] && packages="$packages, "
+        packages="$packages$flatpak_count flatpak"
+    fi
+fi
+emit "Packages" "$packages"
+
+# $SHELL is the login shell, which is the one worth reporting -- the shell this
+# script happens to run under is an implementation detail of the caller.
+if [[ -n "${SHELL:-}" ]]; then
+    shell_name="$(basename "$SHELL")"
+    shell_version="$("$SHELL" --version 2>/dev/null | head -1 | grep -oE '[0-9]+\.[0-9]+(\.[0-9]+)?' | head -1)"
+    emit "Shell" "${shell_name}${shell_version:+ $shell_version}"
+fi
+
+emit "Locale" "${LANG:-}"
+
+case "${XDG_SESSION_TYPE:-}" in
+    wayland) emit "Windowing system" "Wayland" ;;
+    x11)     emit "Windowing system" "X11" ;;
+esac
+
+# ── Hardware ─────────────────────────────────────────────────────────────────
+# The focused monitor's actual mode, including the fractional scale, since a
+# 4500x3000 panel at 1.5 presents very differently from one at 1.
+if command -v hyprctl >/dev/null 2>&1; then
+    emit "Resolution" "$(hyprctl -j monitors 2>/dev/null \
+        | jq -r 'map(select(.focused)) + . | .[0]
+                 | select(. != null)
+                 | "\(.width)x\(.height) @ \(.refreshRate | floor)Hz · scale \(.scale)"' 2>/dev/null)"
+fi
+
+cpu="$(awk -F': ' '/^model name/ { print $2; exit }' /proc/cpuinfo 2>/dev/null)"
+threads="$(nproc 2>/dev/null)"
+if [[ -n "$cpu" ]]; then
+    # The marketing name usually already says "6-Core", so the thread count is
+    # the part that adds information.
+    [[ -n "$threads" ]] && cpu="$cpu ($threads threads)"
+    emit "Processor" "$cpu"
+fi
+
+# Reported as the kernel sees it, which is a little under the sticker figure
+# because firmware and integrated graphics reserve some before Linux starts.
+#
+# Total rather than used: About is not a monitor, and a "12.4 GiB used" figure
+# is stale before it finishes drawing. The Home page's vitals readout is where
+# live numbers belong.
+emit "Memory" "$(awk '/^MemTotal:/ { printf "%.1f GiB", $2 / 1048576 }' /proc/meminfo 2>/dev/null)"
+
+swap="$(awk '/^SwapTotal:/ { if ($2 > 0) printf "%.1f GiB", $2 / 1048576 }' /proc/meminfo 2>/dev/null)"
+emit "Swap" "$swap"
+
+read -r size used avail <<<"$(df -h --output=size,used,avail / 2>/dev/null | tail -1)"
+[[ -n "${size:-}" ]] && emit "Disk" "$avail free of $size"
+
+printf '[%s]\n' "$(IFS=,; printf '%s' "${facts[*]}")"

config/dot/quickshell/scripts/panama-accounts

@@ -0,0 +1,145 @@
+#!/usr/bin/env python3
+
+"""Online accounts, through GNOME Online Accounts.
+
+GOA is a daemon plus a D-Bus API, and it is already running in this session --
+gvfs activates it, and the four accounts on this machine work without
+gnome-shell involved anywhere. What GNOME owns is only the *panel*; the accounts
+themselves are ordinary D-Bus objects that anything may read and modify.
+
+So everything except the initial sign-in is available to us: listing accounts,
+turning individual services on and off, and removing an account. That is the
+whole Online Accounts panel apart from one OAuth handshake.
+
+Adding an account is the part that splits. The daemon's AddAccount takes
+credentials as an ARGUMENT -- it stores them, it does not obtain them. For
+password-based providers (Nextcloud, IMAP, WebDAV) that is a username and a
+password, which a settings app can reasonably collect. For Google it is an OAuth
+token, and the code that runs that exchange lives in libgoa-backend, which
+Fedora ships without a GIR binding -- reachable from C only. Reimplementing it
+would mean our own Google client credentials. So Google sign-in is handed to
+GNOME's panel, and only the sign-in.
+
+Usage:
+  panama-accounts list
+  panama-accounts set <object-path> <service> <true|false>
+  panama-accounts remove <object-path>
+"""
+
+import json
+import sys
+
+# Every service GOA models. The account object carries one interface per service
+# it supports, so presence of the interface is what "this account can do mail"
+# means -- there is no capability list to read.
+SERVICES = [
+    ("mail", "Mail", "get_mail", "mail_disabled"),
+    ("calendar", "Calendar", "get_calendar", "calendar_disabled"),
+    ("contacts", "Contacts", "get_contacts", "contacts_disabled"),
+    ("files", "Files", "get_files", "files_disabled"),
+    ("photos", "Photos", "get_photos", "photos_disabled"),
+    ("music", "Music", "get_music", "music_disabled"),
+    ("chat", "Chat", "get_chat", "chat_disabled"),
+]
+
+
+def load_client():
+    import gi
+
+    gi.require_version("Goa", "1.0")
+    from gi.repository import Goa
+
+    return Goa.Client.new_sync(None)
+
+
+def describe(obj):
+    account = obj.get_account()
+    services = []
+    for key, label, getter, disabled_prop in SERVICES:
+        if getattr(obj, getter)() is None:
+            continue
+        services.append({
+            "key": key,
+            "label": label,
+            "enabled": not getattr(account.props, disabled_prop),
+        })
+
+    return {
+        "path": obj.get_object_path(),
+        "provider": account.props.provider_type,
+        "providerName": account.props.provider_name,
+        # PresentationIdentity is the human one (an email address); Identity is
+        # the internal handle and is not always readable.
+        "identity": account.props.presentation_identity or account.props.identity,
+        # GOA raises this when stored credentials stop working -- an expired
+        # token, a changed password. It is the one piece of state a user must
+        # act on, and nothing else surfaces it.
+        "needsAttention": bool(account.props.attention_needed),
+        "services": services,
+    }
+
+
+def find(client, path):
+    for obj in client.get_accounts():
+        if obj.get_object_path() == path:
+            return obj
+    return None
+
+
+def main():
+    action = sys.argv[1] if len(sys.argv) > 1 else "list"
+
+    try:
+        client = load_client()
+    except Exception as error:  # noqa: BLE001 - any failure here means "no GOA"
+        # A machine without GOA is a legitimate state, not a crash.
+        print(json.dumps({
+            "accounts": [],
+            "error": f"GNOME Online Accounts is not available: {error}",
+        }))
+        return 0
+
+    if action == "list":
+        print(json.dumps({
+            "accounts": [describe(obj) for obj in client.get_accounts()],
+            "error": "",
+        }))
+        return 0
+
+    if action == "set":
+        if len(sys.argv) != 5:
+            print("usage: panama-accounts set <path> <service> <true|false>", file=sys.stderr)
+            return 2
+        path, service, value = sys.argv[2], sys.argv[3], sys.argv[4]
+        obj = find(client, path)
+        if obj is None:
+            print(f"panama-accounts: no account at {path}", file=sys.stderr)
+            return 1
+        match = next((s for s in SERVICES if s[0] == service), None)
+        if match is None:
+            print(f"panama-accounts: unknown service {service!r}", file=sys.stderr)
+            return 2
+        if getattr(obj, match[2])() is None:
+            print(f"panama-accounts: this account does not support {service}", file=sys.stderr)
+            return 1
+        # The property is "disabled", so enabling a service clears it.
+        setattr(obj.get_account().props, match[3], value.lower() not in ("true", "1", "yes"))
+        return 0
+
+    if action == "remove":
+        if len(sys.argv) != 3:
+            print("usage: panama-accounts remove <path>", file=sys.stderr)
+            return 2
+        obj = find(client, sys.argv[2])
+        if obj is None:
+            print(f"panama-accounts: no account at {sys.argv[2]}", file=sys.stderr)
+            return 1
+        obj.get_account().call_remove_sync(None)
+        return 0
+
+    print("usage: panama-accounts [list|set|remove]", file=sys.stderr)
+    return 2
+
+
+if __name__ == "__main__":
+    sys.exit(main())

config/dot/quickshell/scripts/panama-brightness

@@ -57,6 +57,39 @@ has_accessible_bus() {
     return 1
 }
 
+# The I2C bus that carries DDC/CI for one connector.
+#
+# There are two, and picking the wrong one finds no monitor at all:
+#
+#   DisplayPort carries DDC/CI over the AUX channel. That adapter shows up as a
+#   child directory of the connector -- /sys/class/drm/card1-DP-2/i2c-9 -- and
+#   is the one ddcutil talks to.
+#
+#   The connector's `ddc` symlink points at the classic I2C line used for EDID
+#   on HDMI and DVI. On a DisplayPort connector it still exists and still
+#   resolves, but nothing answers on it: this machine's DP-2 has ddc -> i2c-5,
+#   where ddcutil reports "No monitor detected", while i2c-9 answers VCP 0x10
+#   immediately.
+#
+# So prefer the AUX child and fall back to the symlink. Note the readlink: the
+# entries under /sys/class/drm are symlinks, and `find` does not follow the path
+# it is given, so searching the unresolved path silently finds nothing.
+bus_for_connector() {
+    local path="$1" real aux ddc
+
+    real="$(readlink -f "$path")"
+    aux="$(find "$real" -maxdepth 1 -name 'i2c-*' -printf '%f' -quit 2>/dev/null)"
+    if [[ -n "$aux" ]]; then
+        printf '%s' "${aux#i2c-}"
+        return 0
+    fi
+
+    ddc="$(readlink -f "$path/ddc" 2>/dev/null)" || return 1
+    [[ -n "$ddc" ]] || return 1
+    ddc="$(basename "$ddc")"
+    printf '%s' "${ddc#i2c-}"
+}
+
 cmd_list() {
     has_accessible_bus || emit_error 'no I2C bus is accessible. ddcutil ships a udev rule that grants this, but only to devices created after it was installed. Run: sudo udevadm control --reload-rules && sudo udevadm trigger --subsystem-match=i2c-dev --subsystem-match=drm'
 
@@ -69,8 +102,7 @@ cmd_list() {
         connector="$(basename "$path")"
         connector="${connector#card*-}"
 
-        bus="$(basename "$(readlink -f "$path/ddc")")"
-        bus="${bus#i2c-}"
+        bus="$(bus_for_connector "$path")"
         [[ "$bus" =~ ^[0-9]+$ ]] || continue
 
         # A monitor that does not implement 0x10 is not an error; it simply

config/dot/quickshell/scripts/panama-keyring

@@ -0,0 +1,138 @@
+#!/usr/bin/env python3
+
+"""The login keyring's lock state, and a way to unlock it.
+
+Why this exists
+---------------
+GNOME unlocks the login keyring at sign-in through pam_gnome_keyring, and so
+does this desktop -- the PAM stack is GDM's and it works. What GNOME also has,
+and a bare Hyprland session does not, is anywhere to SEE that it failed.
+
+It does fail, rarely. gnome-keyring-daemon can crash (an upstream abort in
+service_method_open_session, seen once here), and when it does, D-Bus activates
+a replacement. That replacement never received the login password, so the login
+keyring comes back LOCKED in the middle of a session that unlocked it correctly
+at login. Everything that stores a secret then starts failing in ways that do
+not mention keyrings at all: a mail client that will not authenticate, a git
+push that cannot find its key, an integration that reports "not configured".
+
+So this reports the state plainly and offers the one action that fixes it.
+
+Unlocking prompts
+-----------------
+`unlock` asks the Secret Service to unlock, which raises the gcr password
+dialog. That is deliberate: the password is not ours to store or handle, and it
+never passes through this script. The dialog is the same one GNOME shows.
+
+Note that a locked keyring makes a NON-INTERACTIVE caller appear to hang -- it
+is not hung, it is waiting for a dialog nobody is looking at. That is worth
+knowing before debugging one for an hour.
+
+Usage:
+  panama-keyring status   -> {"available", "locked", "collections", "daemon"}
+  panama-keyring unlock   -> raises the password prompt; prints the new state
+"""
+
+import json
+import os
+import re
+import sys
+
+
+def daemon_origin():
+    """Whether the running secrets daemon came from PAM or from D-Bus activation.
+
+    A D-Bus-activated daemon is the signature of the crash-and-replace case
+    above: it is the one that cannot have the login password. PAM's daemon lives
+    outside the app slice, so the cgroup tells the two apart.
+    """
+    try:
+        for pid in os.listdir("/proc"):
+            if not pid.isdigit():
+                continue
+            try:
+                with open(f"/proc/{pid}/cmdline", "rb") as handle:
+                    cmdline = handle.read().decode("utf-8", "replace")
+            except OSError:
+                continue
+            if "gnome-keyring-daemon" not in cmdline:
+                continue
+            try:
+                with open(f"/proc/{pid}/cgroup", "r") as handle:
+                    cgroup = handle.read()
+            except OSError:
+                return "unknown"
+            if re.search(r"dbus-.*org\.freedesktop\.secrets", cgroup):
+                return "dbus"
+            return "pam"
+    except OSError:
+        pass
+    return "none"
+
+
+def load_service():
+    import gi
+
+    gi.require_version("Secret", "1")
+    from gi.repository import Secret
+
+    return Secret, Secret.Service.get_sync(Secret.ServiceFlags.LOAD_COLLECTIONS, None)
+
+
+def report(service, Secret):
+    collections = [
+        {"label": c.get_label(), "locked": c.get_locked()}
+        for c in service.get_collections()
+    ]
+    # The login keyring is the one that matters; the others are per-application
+    # stores that manage their own unlocking.
+    login = next((c for c in collections if c["label"] == "Login"), None)
+    return {
+        "available": True,
+        "locked": bool(login["locked"]) if login else False,
+        "hasLogin": login is not None,
+        "collections": collections,
+        "daemon": daemon_origin(),
+        "error": "",
+    }
+
+
+def main():
+    action = sys.argv[1] if len(sys.argv) > 1 else "status"
+    if action not in ("status", "unlock"):
+        print("usage: panama-keyring [status|unlock]", file=sys.stderr)
+        return 2
+
+    try:
+        Secret, service = load_service()
+    except Exception as error:  # noqa: BLE001 - any failure here is "no keyring"
+        # No Secret Service at all is a legitimate state, not a crash: report it
+        # so the UI can say so instead of showing an empty card.
+        print(json.dumps({
+            "available": False, "locked": False, "hasLogin": False,
+            "collections": [], "daemon": daemon_origin(),
+            "error": f"The secret service is not answering: {error}",
+        }))
+        return 0
+
+    if action == "unlock":
+        login = next(
+            (c for c in service.get_collections() if c.get_label() == "Login"), None)
+        if login is not None and login.get_locked():
+            try:
+                # Blocks until the dialog is answered or dismissed.
+                service.unlock_sync([login], None)
+            except Exception as error:  # noqa: BLE001
+                state = report(service, Secret)
+                state["error"] = f"The keyring was not unlocked: {error}"
+                print(json.dumps(state))
+                return 0
+            # The collection object caches its state; re-read it.
+            Secret, service = load_service()
+
+    print(json.dumps(report(service, Secret)))
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

config/dot/quickshell/scripts/panama-locale

@@ -0,0 +1,98 @@
+#!/usr/bin/env bash
+
+# System locale, via localectl.
+#
+#   panama-locale list  -> [{value, label, detail}]
+#   panama-locale get   -> the current LANG, e.g. en_US.UTF-8
+#   panama-locale set <locale>
+#
+# Locale codes are not names. "pt_BR.UTF-8" tells you what it means only if you
+# already know, which defeats the point of a picker, so codes are resolved
+# against the iso-codes database into "Portuguese (Brazil)" the way GNOME does.
+# The code stays visible as the row's detail, because it is what actually gets
+# written and someone choosing between two Spanish variants needs to see it.
+#
+# The join happens in a single jq pass. Doing it per locale meant 327 jq
+# invocations, which took long enough to be visible when opening the page.
+#
+# Setting the locale is a privileged operation: localectl goes through polkit,
+# which prompts. It also only takes effect for programs started afterwards, so
+# the caller is responsible for saying a sign-out is needed -- this script does
+# not pretend the running session changed.
+
+set -uo pipefail
+
+readonly ISO_LANG=/usr/share/iso-codes/json/iso_639-2.json
+readonly ISO_COUNTRY=/usr/share/iso-codes/json/iso_3166-1.json
+
+cmd_get() {
+    localectl status 2>/dev/null \
+        | awk -F'LANG=' '/System Locale:/ { print $2; exit }' \
+        | tr -d '[:space:]'
+}
+
+cmd_list() {
+    local locales
+    locales="$(localectl list-locales 2>/dev/null)" || locales=""
+    if [[ -z "$locales" ]]; then
+        printf '[]\n'
+        return 0
+    fi
+
+    # Without iso-codes installed the codes are still perfectly usable; they
+    # just do not get friendly names. That is a degraded list, not a failure.
+    if [[ ! -r "$ISO_LANG" || ! -r "$ISO_COUNTRY" ]]; then
+        jq -Rn --rawfile raw /dev/stdin \
+            '[$raw | split("\n")[] | select(length > 0) | {value: ., label: ., detail: ""}]' \
+            <<<"$locales"
+        return 0
+    fi
+
+    jq -Rn \
+        --slurpfile languages "$ISO_LANG" \
+        --slurpfile countries "$ISO_COUNTRY" \
+        --rawfile raw /dev/stdin '
+        # alpha_2 -> name, for both databases. Languages without a two-letter
+        # code cannot appear in a locale name, so they are simply absent.
+        ($languages[0]["639-2"] | map(select(.alpha_2)) | INDEX(.alpha_2) | map_values(.name)) as $lang
+        | ($countries[0]["3166-1"] | INDEX(.alpha_2) | map_values(.name)) as $country
+        | [ $raw
+            | split("\n")[]
+            | select(length > 0)
+            | . as $value
+            # en_US.UTF-8 -> ["en", "US"]; the codeset and any @modifier are
+            # not part of the human name.
+            | ($value | split(".")[0] | split("@")[0] | split("_")) as $parts
+            | ($lang[$parts[0]] // $parts[0]) as $language
+            | (if ($parts | length) > 1 then $country[$parts[1]] else null end) as $region
+            | {
+                value: $value,
+                label: (if $region then "\($language) (\($region))" else $language end),
+                detail: $value
+              }
+          ]
+        | sort_by(.label)
+    ' <<<"$locales"
+}
+
+cmd_set() {
+    local locale="${1:-}"
+    # Constrained rather than passed through: this reaches a privileged
+    # command, and the set of legal locale names is narrow and well known.
+    [[ "$locale" =~ ^[[email protected]]+$ ]] || {
+        printf 'panama-locale: refusing a locale name with unexpected characters\n' >&2
+        return 2
+    }
+    localectl list-locales 2>/dev/null | grep -qxF "$locale" || {
+        printf 'panama-locale: %s is not an installed locale\n' "$locale" >&2
+        return 2
+    }
+    localectl set-locale "LANG=$locale"
+}
+
+case "${1:-list}" in
+    list) cmd_list ;;
+    get)  cmd_get ;;
+    set)  shift; cmd_set "${1:-}" ;;
+    *)    printf 'usage: panama-locale [list|get|set <locale>]\n' >&2; exit 2 ;;
+esac

config/dot/quickshell/scripts/panama-osd

@@ -2,6 +2,8 @@
 
 set -u
 
+readonly PANAMA_OSD_SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+
 strict_delivery() {
     [[ ${PANAMA_OSD_STRICT:-false} == true || ${PANAMA_OSD_STRICT:-false} == 1 ]]
 }
@@ -67,18 +69,151 @@ adjust_microphone() {
     show_volume "$target" microphone
 }
 
+brightness_percent() {
+    local output="$1" percent
+    percent="$(awk -F, 'NR == 1 { value=$5; gsub(/%/, "", value); print value }' <<<"$output")"
+    [[ $percent =~ ^[0-9]+$ ]] || return 1
+    printf '%s\n' "$percent"
+}
+
+brightness_error() {
+    local detail="$1" label="External brightness unavailable"
+    if [[ $detail == *udev* || $detail == *accessible* || $detail == *permission* ]]; then
+        label="Brightness needs permission"
+    fi
+
+    show_message dialog-warning-symbolic "$label" || true
+    if command -v notify-send >/dev/null 2>&1; then
+        notify-send --app-name=Panama --icon=display-brightness-symbolic \
+            "Brightness unavailable" "$detail" >/dev/null 2>&1 || true
+    fi
+}
+
+discover_ddc_bus() {
+    local helper="$1" cache_file="$2" list_json focused selected error bus connector
+
+    command -v jq >/dev/null 2>&1 || {
+        brightness_error "jq is required to discover DDC/CI displays."
+        return 1
+    }
+
+    list_json="$("$helper" list 2>/dev/null)" || {
+        brightness_error "The external brightness helper could not inspect connected displays."
+        return 1
+    }
+    if ! jq -e 'type == "object" and (.displays | type == "array")' >/dev/null 2>&1 <<<"$list_json"; then
+        brightness_error "The external brightness helper returned invalid display information."
+        return 1
+    fi
+
+    error="$(jq -r '.error // empty' <<<"$list_json")"
+    if [[ -n $error ]]; then
+        brightness_error "$error"
+        return 1
+    fi
+
+    focused="$(hyprctl -j monitors 2>/dev/null \
+        | jq -r '.[] | select(.focused == true) | .name' 2>/dev/null \
+        | head -n1)"
+    selected="$(jq -r --arg connector "$focused" '
+        ([.displays[] | select(.connector == $connector)][0] // .displays[0] // empty)
+        | [.bus, .connector]
+        | @tsv
+    ' <<<"$list_json")"
+    IFS=$'\t' read -r bus connector <<<"$selected"
+    if [[ ! $bus =~ ^[0-9]+$ ]]; then
+        brightness_error "No connected monitor exposes DDC/CI brightness control."
+        return 1
+    fi
+
+    umask 077
+    printf '%s\t%s\n' "$bus" "$connector" >"$cache_file"
+    printf '%s\n' "$bus"
+}
+
+adjust_ddc_brightness() {
+    local action="$1" step="$2"
+    local helper="${PANAMA_OSD_BRIGHTNESS_HELPER:-$PANAMA_OSD_SCRIPT_DIR/panama-brightness}"
+    local runtime_dir="${PANAMA_OSD_RUNTIME_DIR:-${XDG_RUNTIME_DIR:-/tmp}/panama-osd-${UID}}"
+    local cache_file="$runtime_dir/brightness-bus" lock_file="$runtime_dir/brightness.lock"
+    local bus="" connector="" current target lock_fd
+
+    [[ -x $helper ]] || {
+        brightness_error "The external brightness helper is not installed."
+        return 0
+    }
+    mkdir -p "$runtime_dir" || return 0
+    chmod 700 "$runtime_dir" 2>/dev/null || true
+
+    exec {lock_fd}>"$lock_file" || return 0
+    # DDC transactions on one I2C bus cannot safely overlap. A short wait also
+    # sheds an excessive key-repeat backlog instead of replaying it seconds later.
+    flock -w 2 "$lock_fd" || return 0
+
+    if [[ -r $cache_file ]]; then
+        IFS=$'\t' read -r bus connector <"$cache_file" || true
+        [[ $bus =~ ^[0-9]+$ ]] || bus=""
+    fi
+
+    if [[ -n $bus ]]; then
+        current="$("$helper" get "$bus" 2>/dev/null)" || current=""
+        if [[ ! $current =~ ^[0-9]+$ ]]; then
+            : >"$cache_file"
+            bus=""
+        fi
+    fi
+
+    if [[ -z $bus ]]; then
+        bus="$(discover_ddc_bus "$helper" "$cache_file")" || return 0
+        current="$("$helper" get "$bus" 2>/dev/null)" || current=""
+    fi
+    if [[ ! $current =~ ^[0-9]+$ ]]; then
+        brightness_error "The selected monitor stopped responding over DDC/CI."
+        return 0
+    fi
+
+    if [[ $action == up ]]; then
+        target=$(( current + step ))
+    else
+        target=$(( current - step ))
+    fi
+    (( target > 100 )) && target=100
+    (( target < 0 )) && target=0
+
+    if ! "$helper" set "$bus" "$target" >/dev/null 2>&1; then
+        brightness_error "The selected monitor did not accept the brightness change."
+        return 0
+    fi
+    show_progress brightness "$target" "${target}%"
+}
+
 adjust_brightness() {
     local action="${1:-}" step="${2:-5}" output percent
+    [[ $step =~ ^[0-9]+$ ]] || {
+        printf 'Usage: panama-osd brightness up|down [step]\n' >&2
+        return 2
+    }
     case "$action" in
-        up) brightnessctl -e4 -n2 set "${step}%+" >/dev/null || return ;;
-        down) brightnessctl -e4 -n2 set "${step}%-" >/dev/null || return ;;
+        up|down) ;;
         *) printf 'Usage: panama-osd brightness up|down [step]\n' >&2; return 2 ;;
     esac
 
-    output="$(brightnessctl -m -c backlight 2>/dev/null)" || return 0
-    percent="$(awk -F, 'NR == 1 { value=$5; gsub(/%/, "", value); print value }' <<<"$output")"
-    [[ $percent =~ ^[0-9]+$ ]] || return 0
-    show_progress brightness "$percent" "${percent}%"
+    # Laptop panels expose a kernel backlight class and remain the fastest,
+    # most reliable path. Desktops fall through to DDC/CI monitor control.
+    output="$(brightnessctl -m -c backlight 2>/dev/null)" || output=""
+    if percent="$(brightness_percent "$output")"; then
+        if [[ $action == up ]]; then
+            brightnessctl -e4 -n2 -c backlight set "${step}%+" >/dev/null || return 0
+        else
+            brightnessctl -e4 -n2 -c backlight set "${step}%-" >/dev/null || return 0
+        fi
+        output="$(brightnessctl -m -c backlight 2>/dev/null)" || return 0
+        percent="$(brightness_percent "$output")" || return 0
+        show_progress brightness "$percent" "${percent}%"
+        return
+    fi
+
+    adjust_ddc_brightness "$action" "$step"
 }
 
 media_action() {

config/dot/quickshell/scripts/panama-power-profile

@@ -0,0 +1,85 @@
+#!/usr/bin/env bash
+
+# System power profile, via the PowerProfiles D-Bus API.
+#
+# GNOME's Power panel offers Balanced / Performance / Power Saver; this is the
+# same daemon behind it. On Fedora 44 the implementation is tuned-ppd rather
+# than power-profiles-daemon, but it serves the same net.hadess.PowerProfiles
+# interface, which is why this talks to the interface rather than to either
+# binary -- powerprofilesctl is not even installed here.
+#
+# Setting a profile needs no privileges: the daemon accepts a property write
+# from the active session user.
+#
+# Usage:
+#   panama-power-profile list        -> {"profiles":[...],"active":"...","degraded":"..."}
+#   panama-power-profile set <name>
+#
+# PerformanceDegraded is reported because it is the one thing that makes the
+# choice a lie: a thermally throttled laptop reports "performance" while
+# behaving otherwise, and GNOME surfaces exactly this. It is an empty string
+# when nothing is wrong.
+
+set -uo pipefail
+
+readonly BUS_NAME=net.hadess.PowerProfiles
+readonly OBJECT=/net/hadess/PowerProfiles
+
+emit_error() {
+    printf '{"profiles":[],"active":"","degraded":"","error":%s}\n' "$(jq -Rn --arg e "$1" '$e')"
+    exit 0
+}
+
+command -v busctl >/dev/null 2>&1 || emit_error 'busctl is not available'
+
+property() {
+    busctl get-property "$BUS_NAME" "$OBJECT" "$BUS_NAME" "$1" 2>/dev/null
+}
+
+cmd_list() {
+    # A machine with no power-profiles daemon is a normal state -- plenty of
+    # desktops have none -- so it is reported rather than treated as a failure.
+    busctl status "$BUS_NAME" >/dev/null 2>&1 \
+        || emit_error 'No power profile service is running. GNOME uses power-profiles-daemon; Fedora ships tuned-ppd.'
+
+    local active degraded profiles
+    active="$(property ActiveProfile | sed 's/^s //; s/"//g')"
+    degraded="$(property PerformanceDegraded | sed 's/^s //; s/"//g')"
+
+    # Profiles is an array of dicts, which busctl renders flat:
+    #   v aa{sv} 3 2 "Profile" s "power-saver" "Driver" s "tuned" 2 "Profile" ...
+    # so each profile is the string following its own "Profile" marker. Matching
+    # the marker matters: "Driver" values sit in the same stream, and on this
+    # machine the driver is called "tuned", which a looser pattern happily
+    # reports as a fourth profile that does not exist.
+    profiles="$(property Profiles \
+        | grep -oE '"Profile" s "[a-z-]+"' \
+        | sed 's/.*s "//; s/"$//' \
+        | awk '!seen[$0]++')"
+
+    [[ -n "$profiles" ]] || emit_error 'The power profile service reported no profiles.'
+
+    jq -cn \
+        --arg active "$active" \
+        --arg degraded "$degraded" \
+        --argjson profiles "$(printf '%s\n' "$profiles" | jq -Rn '[inputs | select(length > 0)]')" \
+        '{profiles: $profiles, active: $active, degraded: $degraded, error: ""}'
+}
+
+cmd_set() {
+    local profile="${1:-}"
+    # Constrained rather than passed through: this reaches a system service.
+    [[ "$profile" =~ ^[a-z-]+$ ]] || {
+        printf 'panama-power-profile: refusing a profile name with unexpected characters\n' >&2
+        return 2
+    }
+    busctl set-property "$BUS_NAME" "$OBJECT" "$BUS_NAME" ActiveProfile s "$profile" 2>&1 >/dev/null \
+        | head -2 >&2
+    return 0
+}
+
+case "${1:-list}" in
+    list) cmd_list ;;
+    set)  shift; cmd_set "${1:-}" ;;
+    *)    printf 'usage: panama-power-profile [list|set <profile>]\n' >&2; exit 2 ;;
+esac

config/dot/quickshell/scripts/panama-security

@@ -0,0 +1,83 @@
+#!/usr/bin/env bash
+
+# Device security facts, as JSON.
+#
+# Everything here is READ-ONLY and deliberately so. Secure Boot, TPM presence,
+# disk encryption, SELinux mode and the firewall are set in firmware, at install
+# time, or by system policy -- none of them is a desktop preference, and a
+# settings app that offered to toggle them would either fail or do something
+# far-reaching from a switch that looks like any other.
+#
+# What it is for is answering "is this machine set up the way I think it is",
+# which is the question GNOME's Device Security panel exists to answer and which
+# otherwise needs five commands and root.
+#
+# Each fact is reported as {value, ok} where `ok` marks the reassuring state, so
+# the UI can highlight what deserves attention without hard-coding the meaning
+# of each string. Anything that cannot be determined reports "Unknown" with
+# ok:false rather than guessing, because a security readout that quietly reports
+# "fine" when it failed to look is worse than no readout.
+
+set -uo pipefail
+
+fact() {
+    jq -cn --arg label "$1" --arg value "$2" --argjson ok "$3" --arg detail "${4:-}" \
+        '{label: $label, value: $value, ok: $ok, detail: $detail}'
+}
+
+facts=()
+
+# ── Secure Boot ──────────────────────────────────────────────────────────────
+if command -v mokutil >/dev/null 2>&1; then
+    case "$(mokutil --sb-state 2>/dev/null)" in
+        *"SecureBoot enabled"*)  facts+=("$(fact "Secure Boot" "Enabled" true "Firmware verifies the bootloader and kernel signatures")" ) ;;
+        *"SecureBoot disabled"*) facts+=("$(fact "Secure Boot" "Disabled" false "Firmware does not verify what it boots")") ;;
+        *)                       facts+=("$(fact "Secure Boot" "Unknown" false "The firmware did not report a Secure Boot state")") ;;
+    esac
+elif [[ -d /sys/firmware/efi ]]; then
+    facts+=("$(fact "Secure Boot" "Unknown" false "Install mokutil to report this")")
+else
+    facts+=("$(fact "Secure Boot" "Not applicable" false "This machine booted in legacy BIOS mode")")
+fi
+
+# ── TPM ──────────────────────────────────────────────────────────────────────
+tpm_major="$(cat /sys/class/tpm/tpm0/tpm_version_major 2>/dev/null || true)"
+if [[ -n "$tpm_major" ]]; then
+    facts+=("$(fact "TPM" "Version $tpm_major" true "A trusted platform module is present and usable")")
+elif [[ -e /sys/class/tpm/tpm0 ]]; then
+    facts+=("$(fact "TPM" "Present" true "A trusted platform module is present")")
+else
+    facts+=("$(fact "TPM" "None" false "No trusted platform module, so keys cannot be sealed to this machine")")
+fi
+
+# ── Disk encryption ──────────────────────────────────────────────────────────
+# Counts LUKS mappings rather than naming them: which volume is encrypted is
+# more detail than this readout needs, and device names are not meaningful here.
+crypt_count="$(lsblk -o TYPE 2>/dev/null | grep -c '^crypt$' || true)"
+[[ "$crypt_count" =~ ^[0-9]+$ ]] || crypt_count=0
+if (( crypt_count > 0 )); then
+    facts+=("$(fact "Disk encryption" "$crypt_count encrypted volume$( (( crypt_count == 1 )) || printf 's')" true "Data at rest is protected by LUKS")")
+else
+    facts+=("$(fact "Disk encryption" "None" false "No LUKS volume is unlocked on this machine")")
+fi
+
+# ── SELinux ──────────────────────────────────────────────────────────────────
+if command -v getenforce >/dev/null 2>&1; then
+    case "$(getenforce 2>/dev/null)" in
+        Enforcing)  facts+=("$(fact "SELinux" "Enforcing" true "Policy violations are blocked")") ;;
+        Permissive) facts+=("$(fact "SELinux" "Permissive" false "Violations are logged but allowed")") ;;
+        Disabled)   facts+=("$(fact "SELinux" "Disabled" false "Mandatory access control is off")") ;;
+        *)          facts+=("$(fact "SELinux" "Unknown" false "")") ;;
+    esac
+fi
+
+# ── Firewall ─────────────────────────────────────────────────────────────────
+if systemctl list-unit-files firewalld.service >/dev/null 2>&1; then
+    if [[ "$(systemctl is-active firewalld 2>/dev/null)" == "active" ]]; then
+        facts+=("$(fact "Firewall" "Active" true "firewalld is filtering incoming connections")")
+    else
+        facts+=("$(fact "Firewall" "Inactive" false "firewalld is installed but not running")")
+    fi
+fi
+
+printf '[%s]\n' "$(IFS=,; printf '%s' "${facts[*]}")"

config/dot/quickshell/scripts/panama-theme-apps

@@ -11,6 +11,11 @@
 # Terminals are the notable exception -- they predate the standard and carry
 # their own palettes. kitty is handled here.
 #
+# GTK3 is the other one. Under GNOME, gnome-settings-daemon publishes the theme
+# over XSETTINGS; under Hyprland nothing does, so ~/.config/gtk-3.0/settings.ini
+# is authoritative for GTK3 applications. Pinned to dark, it contradicted the
+# scheme in light mode, so it is generated from a template here instead.
+#
 #   panama-theme-apps dark|light
 #
 # kitty gets it twice: the generated include file so terminals opened later
@@ -26,6 +31,84 @@ case "$scheme" in
     *) printf 'usage: panama-theme-apps [dark|light]\n' >&2; exit 2 ;;
 esac
 
+# ── tmux ─────────────────────────────────────────────────────────────────────
+# Generated like kitty's: tmux.conf sources current-theme.conf, and that file is
+# machine state rather than configuration. Running servers are re-sourced so an
+# open session changes now instead of at next launch -- tmux applies a
+# source-file to every attached client immediately.
+tmux_dir="${XDG_CONFIG_HOME:-$HOME/.config}/tmux"
+tmux_theme="$tmux_dir/themes/tokyonight-moon.conf"
+[[ "$scheme" == "light" ]] && tmux_theme="$tmux_dir/themes/tokyonight-day.conf"
+
+status_tmux="skipped"
+if [[ -r "$tmux_theme" ]]; then
+    if cp "$tmux_theme" "$tmux_dir/current-theme.conf.tmp" 2>/dev/null \
+        && mv "$tmux_dir/current-theme.conf.tmp" "$tmux_dir/current-theme.conf" 2>/dev/null; then
+        status_tmux="written"
+        # Only if a server is actually running; `tmux source-file` would
+        # otherwise start one just to theme it.
+        if command -v tmux >/dev/null 2>&1 && tmux has-session 2>/dev/null; then
+            tmux source-file "$tmux_dir/current-theme.conf" 2>/dev/null \
+                && status_tmux="applied to running sessions"
+        fi
+    else
+        rm -f "$tmux_dir/current-theme.conf.tmp"
+        status_tmux="failed"
+    fi
+fi
+
+# ── btop ─────────────────────────────────────────────────────────────────────
+# Only the color_theme line is rewritten, in place. btop OWNS btop.conf -- it
+# rewrites the whole file on exit -- so the config is not symlinked into Panama
+# and not replaced wholesale here; just this one value is edited, and btop keeps
+# it on the next write.
+#
+# btop reads its theme once at startup, so a running instance keeps the old
+# colours until it is restarted. That is acceptable for a monitor you open when
+# you want it, and forcing a restart would kill a process the user is watching.
+btop_conf="${XDG_CONFIG_HOME:-$HOME/.config}/btop/btop.conf"
+btop_theme="tokyonight-moon"
+[[ "$scheme" == "light" ]] && btop_theme="tokyonight-day"
+
+status_btop="skipped"
+if [[ -w "$btop_conf" ]]; then
+    if sed -i "s|^color_theme *=.*|color_theme = \"$btop_theme\"|" "$btop_conf" 2>/dev/null; then
+        status_btop="written"
+    else
+        status_btop="failed"
+    fi
+fi
+
+# ── GTK ──────────────────────────────────────────────────────────────────────
+# adw-gtk3, not Adwaita: no Adwaita GTK theme is installed on Fedora 44, and
+# naming a theme that does not exist makes GTK fall back to its light default --
+# which made dark mode silently produce light windows.
+if [[ "$scheme" == "light" ]]; then
+    gtk_theme="adw-gtk3"
+    prefer_dark=0
+else
+    gtk_theme="adw-gtk3-dark"
+    prefer_dark=1
+fi
+
+status_gtk="skipped"
+for gtk_version in 3.0 4.0; do
+    gtk_dir="${XDG_CONFIG_HOME:-$HOME/.config}/gtk-$gtk_version"
+    template="$gtk_dir/settings.ini.template"
+    [[ -r "$template" ]] || continue
+
+    # Written atomically: a GTK application starting mid-write would otherwise
+    # read a truncated file and fall back to defaults.
+    if sed -e "s/@GTK_THEME@/$gtk_theme/" -e "s/@PREFER_DARK@/$prefer_dark/" "$template" \
+        >"$gtk_dir/settings.ini.tmp" 2>/dev/null \
+        && mv "$gtk_dir/settings.ini.tmp" "$gtk_dir/settings.ini" 2>/dev/null; then
+        status_gtk="written"
+    else
+        rm -f "$gtk_dir/settings.ini.tmp"
+        status_gtk="failed"
+    fi
+done
+
 kitty_dir="${XDG_CONFIG_HOME:-$HOME/.config}/kitty"
 theme_file="$kitty_dir/themes/tokyonight-moon.conf"
 [[ "$scheme" == "light" ]] && theme_file="$kitty_dir/themes/tokyonight-day.conf"
@@ -54,4 +137,13 @@ if [[ -r "$theme_file" ]]; then
     fi
 fi
 
-printf '{"scheme":"%s","kitty":"%s"}\n' "$scheme" "$status_kitty"
+# Every target reports what actually happened. A helper that says only
+# "kitty: applied" while silently skipping three other applications is how a
+# half-applied theme goes unnoticed.
+jq -cn \
+    --arg scheme "$scheme" \
+    --arg kitty "$status_kitty" \
+    --arg gtk "$status_gtk" \
+    --arg btop "$status_btop" \
+    --arg tmux "$status_tmux" \
+    '{scheme: $scheme, kitty: $kitty, gtk: $gtk, btop: $btop, tmux: $tmux}'

config/dot/quickshell/scripts/panama-wifi-qr

@@ -0,0 +1,121 @@
+#!/usr/bin/env bash
+
+# A QR code for a saved Wi-Fi network, so a guest can join by pointing a camera.
+#
+# GNOME's Wi-Fi panel has this and it is the single most-used thing in it.
+# The payload is the de-facto WIFI: URI that Android and iOS both scan:
+#
+#   WIFI:T:WPA;S:<ssid>;P:<passphrase>;H:<hidden>;;
+#
+# HANDLING THE PASSPHRASE
+#
+# This image contains the network password in machine-readable form. Anyone who
+# can read the file can read the password, so:
+#
+#   * it is written under XDG_RUNTIME_DIR, which is 0700 and on tmpfs, so it
+#     never reaches disk and disappears at logout -- not /tmp, which is shared;
+#   * it is created with umask 077;
+#   * the passphrase is never printed, never passed as an argument (argv is
+#     world-readable via /proc), and never appears in an error message.
+#
+# It is piped to qrencode on stdin for that last reason.
+#
+# Usage:
+#   panama-wifi-qr list        -> {"networks":[{"name","ssid","shareable"}]}
+#   panama-wifi-qr qr <name>   -> {"path":"/run/user/…/….png"}
+
+set -uo pipefail
+
+emit_error() {
+    printf '{"networks":[],"path":"","error":%s}\n' "$(jq -Rn --arg e "$1" '$e')"
+    exit 0
+}
+
+command -v nmcli >/dev/null 2>&1 || emit_error 'NetworkManager is not available'
+command -v qrencode >/dev/null 2>&1 || emit_error 'qrencode is not installed, so a Wi-Fi QR code cannot be drawn'
+
+cmd_list() {
+    local rows=() name ssid psk
+    while IFS= read -r name; do
+        [[ -n "$name" ]] || continue
+        ssid="$(nmcli -g 802-11-wireless.ssid connection show "$name" 2>/dev/null)"
+        [[ -n "$ssid" ]] || ssid="$name"
+
+        # Only networks whose passphrase this user can actually read are
+        # shareable. An enterprise network has no passphrase to share at all,
+        # and a QR code for one would simply not work.
+        psk="$(nmcli -s -g 802-11-wireless-security.psk connection show "$name" 2>/dev/null)"
+
+        rows+=("$(jq -cn --arg name "$name" --arg ssid "$ssid" \
+            --argjson shareable "$([[ -n "$psk" ]] && echo true || echo false)" \
+            '{name: $name, ssid: $ssid, shareable: $shareable}')")
+    done < <(nmcli -t -f NAME,TYPE connection show 2>/dev/null \
+        | awk -F: '$2 == "802-11-wireless" { print $1 }')
+
+    if [[ ${#rows[@]} -eq 0 ]]; then
+        printf '{"networks":[],"path":"","error":"No saved Wi-Fi networks."}\n'
+        return 0
+    fi
+    printf '{"networks":[%s],"path":"","error":""}\n' "$(IFS=,; printf '%s' "${rows[*]}")"
+}
+
+# The WIFI: URI reserves \ ; , : and ", each escaped with a backslash. An SSID
+# containing a semicolon would otherwise terminate the field early and produce a
+# QR code for a different network entirely.
+#
+# Trailing newlines are stripped as well. nmcli terminates every value with one,
+# and left in place it lands INSIDE the payload -- the code still decodes here,
+# but a newline in the middle of a WIFI: URI is not something every phone's
+# scanner tolerates, and the failure would look like "the QR code just does not
+# work on my phone".
+escape_field() {
+    sed -e 's/\\/\\\\/g' -e 's/;/\\;/g' -e 's/,/\\,/g' -e 's/:/\\:/g' -e 's/"/\\"/g' \
+        | tr -d '\n'
+}
+
+cmd_qr() {
+    local name="${1:-}"
+    [[ -n "$name" ]] || emit_error 'no network named'
+
+    local ssid hidden psk_file payload_file out_dir out_file
+    ssid="$(nmcli -g 802-11-wireless.ssid connection show "$name" 2>/dev/null)"
+    [[ -n "$ssid" ]] || emit_error "There is no saved network called \"$name\"."
+
+    hidden="$(nmcli -g 802-11-wireless.hidden connection show "$name" 2>/dev/null)"
+    [[ "$hidden" == "yes" ]] && hidden=true || hidden=false
+
+    out_dir="${XDG_RUNTIME_DIR:-/run/user/$(id -u)}/panama"
+    umask 077
+    mkdir -p "$out_dir" 2>/dev/null || emit_error 'could not create the runtime directory'
+    chmod 700 "$out_dir" 2>/dev/null || true
+
+    # Named after the connection, hashed, so repeated shares reuse one file
+    # instead of accumulating images of the password.
+    out_file="$out_dir/wifi-$(printf '%s' "$name" | sha256sum | cut -c1-16).png"
+
+    # Built in a file rather than a variable that could be echoed, and piped to
+    # qrencode on stdin so the passphrase never appears in argv.
+    payload_file="$(mktemp "$out_dir/payload.XXXXXX")" || emit_error 'could not create a temporary file'
+    trap 'rm -f "$payload_file"' RETURN
+
+    {
+        printf 'WIFI:T:WPA;S:'
+        printf '%s' "$ssid" | escape_field
+        printf ';P:'
+        nmcli -s -g 802-11-wireless-security.psk connection show "$name" 2>/dev/null | escape_field
+        printf ';H:%s;;' "$hidden"
+    } >"$payload_file"
+
+    if ! qrencode -o "$out_file" -s 8 -m 2 -l M <"$payload_file" 2>/dev/null; then
+        emit_error "Could not generate a QR code for \"$name\"."
+    fi
+    chmod 600 "$out_file" 2>/dev/null || true
+
+    jq -cn --arg path "$out_file" '{networks: [], path: $path, error: ""}'
+}
+
+case "${1:-list}" in
+    list) cmd_list ;;
+    qr)   shift; cmd_qr "${1:-}" ;;
+    *)    printf 'usage: panama-wifi-qr [list|qr <name>]\n' >&2; exit 2 ;;
+esac

config/dot/quickshell/services/ColorScheme.qml

@@ -78,9 +78,21 @@ Singleton {
         root.lastError = "";
 
         const scheme = root.dark ? "prefer-dark" : "prefer-light";
-        // Adwaita's light and dark are the same theme; only the preference and
-        // the -dark suffix differ, so applications that honour either agree.
-        const gtkTheme = root.dark ? "Adwaita-dark" : "Adwaita";
+
+        // adw-gtk3, not Adwaita. This is the bug that made dark mode look
+        // broken while light mode looked fine:
+        //
+        // Neither "Adwaita" nor "Adwaita-dark" is an installed theme on Fedora
+        // 44 -- only adw-gtk3 and adw-gtk3-dark are. Naming a theme that does
+        // not exist makes GTK fall back to its built-in default, which is
+        // LIGHT. So asking for light accidentally worked, asking for dark
+        // silently produced light, and applications that take their cue from
+        // the GTK theme rather than the portal -- Chromium and Electron, when
+        // built against GTK -- stayed light no matter what the portal said.
+        //
+        // gtk-theme-contract asserts these names are actually installed,
+        // because the failure mode is silent in exactly this way.
+        const gtkTheme = root.dark ? "adw-gtk3-dark" : "adw-gtk3";
 
         const commands = [
             ["gsettings", "set", "org.gnome.desktop.interface", "color-scheme", scheme],

config/dot/quickshell/services/DeviceSecurity.qml

@@ -0,0 +1,54 @@
+pragma Singleton
+
+// Read-only device security facts: Secure Boot, TPM, disk encryption, SELinux,
+// firewall.
+//
+// Nothing here is a preference. These are set in firmware, at install time, or
+// by system policy, and a settings app that offered to change them from a
+// switch would either fail or do something far-reaching from a control that
+// looks like every other control. What this answers is "is this machine set up
+// the way I think it is", which otherwise takes five commands and root.
+//
+// Read on demand. None of these can change while the desktop is running,
+// short of a reboot.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-security"
+
+    // [{ label, value, ok, detail }]
+    property var facts: []
+    property bool scanned: false
+
+    // The facts that are not in their reassuring state. The page leads with the
+    // count so a machine that is entirely fine says so in one line instead of
+    // making the user read five rows to find out.
+    readonly property int attentionCount: root.facts.filter(fact => !fact.ok).length
+
+    function refresh(): void {
+        if (!query.running)
+            query.running = true;
+    }
+
+    Process {
+        id: query
+        command: [root.helperPath]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.facts = Array.isArray(parsed) ? parsed : [];
+                } catch (error) {
+                    root.facts = [];
+                    console.warn("DeviceSecurity: could not parse helper output:", error);
+                }
+                root.scanned = true;
+            }
+        }
+    }
+}

config/dot/quickshell/services/InputDevices.qml

@@ -0,0 +1,66 @@
+pragma Singleton
+
+// What input hardware this machine actually has.
+//
+// Exists so pages can hide controls for hardware that is not present. A
+// touchpad card on a desktop is not merely useless -- it is misleading, because
+// every switch on it appears to work: the preference is stored and Hyprland
+// accepts the option for a device class it has no member of. The user is left
+// toggling settings that will never affect anything, with nothing to say so.
+//
+// Touchpads are identified by name. libinput exposes them through the same
+// "mice" list as everything else that reports pointer motion, and Hyprland
+// passes the device name through, so an Elan or Synaptics touchpad arrives as
+// something like "elan-touchpad". There is no device-class field to consult.
+//
+// Read on demand rather than polled. Input devices do come and go -- a mouse is
+// unplugged, a receiver is moved -- so this also refreshes when Hyprland says
+// the device list changed, which is the only moment the answer can differ.
+
+import Quickshell
+import Quickshell.Io
+import Quickshell.Hyprland
+import QtQuick
+
+Singleton {
+    id: root
+
+    property var mice: []
+    property var keyboards: []
+
+    // True when anything that looks like a touchpad is attached.
+    readonly property bool hasTouchpad: root.mice.some(name =>
+        name.includes("touchpad") || name.includes("trackpad"))
+
+    readonly property bool hasMouse: root.mice.length > 0
+
+    function refresh(): void {
+        if (!query.running)
+            query.running = true;
+    }
+
+    Process {
+        id: query
+        running: true
+        command: ["hyprctl", "-j", "devices"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.mice = (parsed.mice ?? []).map(device => String(device.name ?? "").toLowerCase());
+                    root.keyboards = (parsed.keyboards ?? []).map(device => String(device.name ?? "").toLowerCase());
+                } catch (error) {
+                    console.warn("InputDevices: could not parse hyprctl devices:", error);
+                }
+            }
+        }
+    }
+
+    Connections {
+        target: Hyprland
+        function onRawEvent(event: var): void {
+            if (event.name === "device" || event.name === "configreloaded")
+                root.refresh();
+        }
+    }
+}

config/dot/quickshell/services/Keyring.qml

@@ -0,0 +1,83 @@
+pragma Singleton
+
+// The login keyring's lock state.
+//
+// The keyring is unlocked at sign-in by pam_gnome_keyring, exactly as it is
+// under GNOME. What a bare Hyprland session lacks is anywhere to see when that
+// has stopped being true.
+//
+// It stops being true rarely but expensively: gnome-keyring-daemon can crash,
+// D-Bus activates a replacement, and the replacement never received the login
+// password -- so the keyring is locked in the middle of a session that unlocked
+// it correctly. Nothing announces this. What the user sees instead is a mail
+// account that will not authenticate, a git push that cannot find its key, or
+// an integration reporting "not configured", none of which mention keyrings.
+//
+// Checked on demand and after an unlock, not polled: the state changes only
+// when a daemon dies or a password is entered.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-keyring"
+
+    property bool available: false
+    property bool locked: false
+    property bool scanned: false
+    property bool unlocking: false
+    property string lastError: ""
+
+    // "pam" when the daemon that holds the keyring is the one PAM started at
+    // login, "dbus" when it is a D-Bus-activated replacement -- which is the
+    // signature of the crash case, and worth showing, because a dbus daemon
+    // that is currently unlocked was unlocked by hand and will not survive.
+    property string daemon: ""
+
+    readonly property bool replacementDaemon: root.daemon === "dbus"
+
+    function refresh(): void {
+        if (!query.running)
+            query.running = true;
+    }
+
+    // Raises the standard password dialog. The password never passes through
+    // Panama -- the Secret Service prompts, the same way it does under GNOME.
+    function unlock(): void {
+        if (root.unlocking)
+            return;
+        root.unlocking = true;
+        unlockProcess.running = true;
+    }
+
+    function absorb(text: string): void {
+        try {
+            const parsed = JSON.parse(text);
+            root.available = parsed.available === true;
+            root.locked = parsed.locked === true;
+            root.daemon = String(parsed.daemon ?? "");
+            root.lastError = String(parsed.error ?? "");
+        } catch (error) {
+            root.available = false;
+            root.lastError = "Could not read the keyring helper's output.";
+            console.warn("Keyring: could not parse helper output:", error);
+        }
+        root.scanned = true;
+    }
+
+    Process {
+        id: query
+        command: [root.helperPath, "status"]
+        stdout: StdioCollector { onStreamFinished: root.absorb(this.text) }
+    }
+
+    Process {
+        id: unlockProcess
+        command: [root.helperPath, "unlock"]
+        stdout: StdioCollector { onStreamFinished: root.absorb(this.text) }
+        onExited: root.unlocking = false
+    }
+}

config/dot/quickshell/services/MachineInfo.qml

@@ -0,0 +1,47 @@
+pragma Singleton
+
+// What this machine is: model, processor, memory, disk, OS, kernel.
+//
+// Read once, on demand. None of it changes while the desktop is running except
+// free disk space, and About is not a monitor -- the vitals readout on the Home
+// page is where live figures belong.
+//
+// Graphics is not here. GraphicsDevices already enumerates GPUs for the vitals
+// readout, and naming them again would be a second source of truth that could
+// disagree with the first; the About page joins the two instead.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-about"
+
+    // [{ label, value }] in display order.
+    property var facts: []
+    property bool scanned: false
+
+    function refresh(): void {
+        if (!query.running)
+            query.running = true;
+    }
+
+    Process {
+        id: query
+        command: [root.helperPath]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.facts = Array.isArray(parsed) ? parsed : [];
+                } catch (error) {
+                    root.facts = [];
+                    console.warn("MachineInfo: could not parse helper output:", error);
+                }
+                root.scanned = true;
+            }
+        }
+    }
+}

config/dot/quickshell/services/OnlineAccounts.qml

@@ -0,0 +1,95 @@
+pragma Singleton
+
+// Online accounts, via GNOME Online Accounts.
+//
+// The daemon already runs in this session -- gvfs activates it, and accounts
+// work without gnome-shell anywhere. Only the panel was GNOME's; the accounts
+// are D-Bus objects anything may read and modify. So listing, per-service
+// toggles, and removal all happen here, natively.
+//
+// Signing in is the exception, and only for OAuth providers. The daemon's
+// AddAccount takes credentials as an argument rather than obtaining them, and
+// the code that runs Google's OAuth exchange lives in libgoa-backend, which
+// Fedora ships without a GIR binding. So that one step is handed to GNOME's
+// panel and the user comes straight back here.
+//
+// Read on demand and after every change: accounts are added and removed by
+// people, not by the system, so there is nothing to poll for.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-accounts"
+
+    // [{ path, provider, providerName, identity, needsAttention, services: [{key,label,enabled}] }]
+    property var accounts: []
+    property bool scanned: false
+    property bool busy: false
+    property string lastError: ""
+
+    // Accounts whose stored credentials have stopped working -- an expired
+    // token, a changed password. GOA knows, and nothing outside its own panel
+    // ever says so, which is how an account quietly stops syncing for weeks.
+    readonly property int attentionCount: root.accounts.filter(a => a.needsAttention).length
+
+    readonly property bool available: root.lastError === ""
+
+    function refresh(): void {
+        if (!list.running)
+            list.running = true;
+    }
+
+    // Enabling a service clears GOA's "disabled" flag; the helper owns that
+    // inversion so the UI can speak in terms of what is on.
+    function setService(path: string, service: string, enabled: bool): void {
+        if (root.busy)
+            return;
+        root.busy = true;
+        write.command = [root.helperPath, "set", path, service, enabled ? "true" : "false"];
+        write.running = true;
+    }
+
+    function remove(path: string): void {
+        if (root.busy)
+            return;
+        root.busy = true;
+        write.command = [root.helperPath, "remove", path];
+        write.running = true;
+    }
+
+    Process {
+        id: list
+        command: [root.helperPath, "list"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.accounts = Array.isArray(parsed.accounts) ? parsed.accounts : [];
+                    root.lastError = String(parsed.error ?? "");
+                } catch (error) {
+                    root.accounts = [];
+                    root.lastError = "Could not read the accounts helper's output.";
+                    console.warn("OnlineAccounts: could not parse helper output:", error);
+                }
+                root.scanned = true;
+            }
+        }
+    }
+
+    Process {
+        id: write
+        stderr: StdioCollector {
+            onStreamFinished: if (this.text.trim() !== "") root.lastError = this.text.trim()
+        }
+        // Re-read rather than assuming the write landed: GOA may refuse, and a
+        // toggle that sprang back is the honest outcome.
+        onExited: {
+            root.busy = false;
+            root.refresh();
+        }
+    }
+}

config/dot/quickshell/services/PowerProfiles.qml

@@ -0,0 +1,107 @@
+pragma Singleton
+
+// The system power profile: power-saver, balanced, or performance.
+//
+// The same daemon GNOME's Power panel drives. On Fedora 44 the implementation
+// is tuned-ppd rather than power-profiles-daemon, but it serves the same
+// net.hadess.PowerProfiles interface -- so this talks to the interface, not to
+// either binary. powerprofilesctl is not installed here at all.
+//
+// Not a stored preference. The profile lives in the daemon, survives Panama
+// restarts, and can be changed by anything else on the system; keeping a copy
+// in settings.json would mean restoring a value the daemon had moved past.
+// Same reasoning as monitor brightness.
+//
+// Read on demand and after each change. The daemon does emit PropertiesChanged,
+// but subscribing to it would mean holding a bus connection open for a value
+// that changes only when someone chooses it.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-power-profile"
+
+    property var profiles: []
+    property string active: ""
+    property bool scanned: false
+    property bool busy: false
+    property string lastError: ""
+
+    // Non-empty when the machine cannot actually deliver the profile it is set
+    // to -- thermal throttling, or a laptop running on battery. Worth showing,
+    // because otherwise "performance" is a claim the hardware is not honouring.
+    property string degraded: ""
+
+    readonly property bool available: root.profiles.length > 0
+
+    // Presentation lives here rather than in the page so the Control Center and
+    // Settings cannot disagree about what a profile is called.
+    function label(profile: string): string {
+        switch (profile) {
+        case "power-saver": return "Power Saver";
+        case "balanced": return "Balanced";
+        case "performance": return "Performance";
+        default: return profile;
+        }
+    }
+
+    function detail(profile: string): string {
+        switch (profile) {
+        case "power-saver": return "Reduces performance to save energy and run quieter";
+        case "balanced": return "Standard behaviour, scaling up only when needed";
+        case "performance": return "Holds higher clocks, using more power and making more noise";
+        default: return "";
+        }
+    }
+
+    function refresh(): void {
+        if (!query.running)
+            query.running = true;
+    }
+
+    function set(profile: string): void {
+        if (root.busy || profile === root.active)
+            return;
+        root.busy = true;
+        apply.command = [root.helperPath, "set", profile];
+        apply.running = true;
+    }
+
+    Process {
+        id: query
+        command: [root.helperPath, "list"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.profiles = Array.isArray(parsed.profiles) ? parsed.profiles : [];
+                    root.active = String(parsed.active ?? "");
+                    root.degraded = String(parsed.degraded ?? "");
+                    root.lastError = String(parsed.error ?? "");
+                } catch (error) {
+                    root.profiles = [];
+                    root.lastError = "Could not read the power profile helper's output.";
+                    console.warn("PowerProfiles: could not parse helper output:", error);
+                }
+                root.scanned = true;
+            }
+        }
+    }
+
+    Process {
+        id: apply
+        stderr: StdioCollector {
+            onStreamFinished: if (this.text.trim() !== "") root.lastError = this.text.trim()
+        }
+        // Re-read rather than assuming: the daemon may refuse, or may land on a
+        // different profile than the one asked for.
+        onExited: {
+            root.busy = false;
+            root.refresh();
+        }
+    }
+}

config/dot/quickshell/services/SettingsSearch.qml

@@ -33,6 +33,9 @@ Singleton {
         "idle": "power",
         "accessibility": "accessibility",
         "input": "shortcuts",
+        "pointer": "mouse",
+        "touchpad": "mouse",
+        "multitasking": "desktop",
         "weather": "appearance",
         "notifications": "notifications",
         "capture": "screen-intelligence"

config/dot/quickshell/services/ShellState.qml

@@ -92,7 +92,7 @@ Singleton {
     }
 
     function openSettings(page: string): void {
-        const allowed = ["home", "appearance", "displays", "connectivity", "home-phone", "desktop", "sound", "notifications", "screen-intelligence", "shortcuts", "accessibility", "power", "datetime", "applications", "services", "about"];
+        const allowed = ["home", "appearance", "displays", "connectivity", "home-phone", "desktop", "sound", "notifications", "screen-intelligence", "shortcuts", "mouse", "privacy", "region", "accounts", "accessibility", "power", "datetime", "applications", "services", "about"];
         root.settingsPage = allowed.indexOf(page) >= 0 ? page : "home";
         DesktopPreferences.set("lastPage", root.settingsPage);
         root.settingsOpen = true;

config/dot/quickshell/services/SystemLocale.qml

@@ -0,0 +1,99 @@
+pragma Singleton
+
+// The system locale.
+//
+// Named SystemLocale, not Locale: QML has a built-in Locale value type, and a
+// singleton of that name is silently shadowed by it. Every binding then reads
+// properties off the wrong thing and the page renders empty with only
+// "Cannot read property of undefined" to show for it.
+//
+// Changing it is privileged: localectl goes through polkit, which prompts
+// (hyprpolkitagent serves that in this session). It also only applies to
+// programs started afterwards, so `pendingRestart` goes true once a change is
+// accepted and the page says a sign-out is needed. Reporting the new locale as
+// simply "in effect" would be wrong -- almost nothing on screen would be using
+// it yet.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-locale"
+
+    // [{ value, label, detail }]
+    property var locales: []
+    property string current: ""
+    property bool scanning: false
+    property string lastError: ""
+
+    // True once a change has been accepted but the session has not restarted,
+    // so the UI can stop claiming the new locale is already in use.
+    property bool pendingRestart: false
+
+    readonly property string currentLabel: {
+        const match = root.locales.find(locale => locale.value === root.current);
+        return match ? match.label : root.current;
+    }
+
+    function refresh(): void {
+        if (root.scanning)
+            return;
+        root.scanning = true;
+        readCurrent.running = true;
+        list.running = true;
+    }
+
+    function set(value: string): void {
+        if (value === root.current)
+            return;
+        apply.command = [root.helperPath, "set", value];
+        apply.pendingValue = value;
+        apply.running = true;
+    }
+
+    Process {
+        id: list
+        command: [root.helperPath, "list"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.locales = Array.isArray(parsed) ? parsed : [];
+                } catch (error) {
+                    root.locales = [];
+                    console.warn("SystemLocale: could not parse the locale list:", error);
+                }
+                root.scanning = false;
+            }
+        }
+    }
+
+    Process {
+        id: readCurrent
+        command: [root.helperPath, "get"]
+        stdout: StdioCollector {
+            onStreamFinished: root.current = this.text.trim()
+        }
+    }
+
+    Process {
+        id: apply
+
+        property string pendingValue: ""
+
+        // A refused change -- polkit dismissed, or an unknown locale -- must not
+        // move the UI. The value is only adopted on a zero exit.
+        onExited: code => {
+            if (code === 0) {
+                root.current = apply.pendingValue;
+                root.pendingRestart = true;
+                root.lastError = "";
+            } else {
+                root.lastError = "The system did not accept that language. It may have needed a password.";
+            }
+        }
+    }
+}

config/dot/quickshell/services/SystemSettings.qml

@@ -497,18 +497,35 @@ Singleton {
         ].indexOf(panel) >= 0;
     }
 
-    function openGnomePanel(panel: string): bool {
+    // `subpage` reaches the panels GNOME 50 nests under System -- users,
+    // about, datetime, region -- which its own desktop entries open as
+    // `gnome-control-center system users`. Without it, a row labelled "Users"
+    // lands on System's front page and leaves the user to navigate, which is
+    // most of the way to a broken button.
+    function openGnomePanel(panel: string, subpage: string): bool {
         if (!root.isGnomePanelAllowed(panel)) {
             root.lastError = "That GNOME Settings panel is not available.";
             return false;
         }
+        const command = ["gnome-control-center", panel];
+        if (subpage !== undefined && subpage !== "" && root.isGnomeSubpageAllowed(panel, subpage))
+            command.push(subpage);
         Quickshell.execDetached({
-            command: ["gnome-control-center", panel],
+            command: command,
             environment: { "XDG_CURRENT_DESKTOP": "GNOME" }
         });
         return true;
     }
 
+    // Only System nests panels, and only these. Read off the Exec lines of the
+    // gnome-*-panel desktop entries rather than guessed, for the same reason
+    // the panel list above was.
+    function isGnomeSubpageAllowed(panel: string, subpage: string): bool {
+        if (panel !== "system")
+            return false;
+        return ["users", "about", "datetime", "region", "remote-desktop"].indexOf(subpage) >= 0;
+    }
+
     function openApplication(id: string): bool {
         const commands = {
             "nextcloud": ["nextcloud"],

config/dot/quickshell/services/WifiShare.qml

@@ -0,0 +1,99 @@
+pragma Singleton
+
+// A QR code for a saved Wi-Fi network, so a guest can join by pointing a phone
+// at the screen. GNOME's Wi-Fi panel has this and it is the most-used thing in
+// it; reading a passphrase aloud is the alternative.
+//
+// The generated image contains the network password in machine-readable form,
+// so the helper writes it under XDG_RUNTIME_DIR -- 0700, on tmpfs, gone at
+// logout -- rather than anywhere persistent. Nothing here ever holds the
+// passphrase itself; this service only ever sees a file path.
+//
+// Generated on demand. Producing a QR for every saved network up front would
+// mean writing images of passwords nobody asked to see.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-wifi-qr"
+
+    // [{ name, ssid, shareable }]
+    property var networks: []
+    property bool scanned: false
+    property string lastError: ""
+
+    // The network whose code is on screen, and where its image is. Empty when
+    // nothing is being shared.
+    property string sharing: ""
+    property string imagePath: ""
+
+    readonly property var shareable: root.networks.filter(n => n.shareable)
+
+    function refresh(): void {
+        if (!list.running)
+            list.running = true;
+    }
+
+    function share(name: string): void {
+        if (generate.running)
+            return;
+        // Cache-bust: the helper reuses one file per network, so a QML Image
+        // pointed at the same path would keep showing the previous render.
+        root.imagePath = "";
+        root.sharing = name;
+        generate.command = [root.helperPath, "qr", name];
+        generate.running = true;
+    }
+
+    function stopSharing(): void {
+        root.sharing = "";
+        root.imagePath = "";
+    }
+
+    Process {
+        id: list
+        command: [root.helperPath, "list"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.networks = Array.isArray(parsed.networks) ? parsed.networks : [];
+                    root.lastError = String(parsed.error ?? "");
+                } catch (error) {
+                    root.networks = [];
+                    root.lastError = "Could not read the Wi-Fi helper's output.";
+                    console.warn("WifiShare: could not parse helper output:", error);
+                }
+                root.scanned = true;
+            }
+        }
+    }
+
+    Process {
+        id: generate
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    const path = String(parsed.path ?? "");
+                    const error = String(parsed.error ?? "");
+                    if (error !== "" || path === "") {
+                        root.lastError = error !== "" ? error : "No QR code was produced.";
+                        root.sharing = "";
+                        return;
+                    }
+                    root.lastError = "";
+                    root.imagePath = path;
+                } catch (error) {
+                    root.lastError = "Could not read the generated QR code's path.";
+                    root.sharing = "";
+                    console.warn("WifiShare: could not parse helper output:", error);
+                }
+            }
+        }
+    }
+}