Fix the install pipeline and an idle-lock startup race

The initial package list was quoted into a single bogus dnf argument
and every dnf error was discarded, so a fresh install silently skipped
most of it. Two package lists were never wired into the pipeline at
all, and change-settings ran before install-packages, so the vicinae
theme step was permanently skipped. Fixed the ordering, the quoting,
and stopped swallowing errors.

Separately, hypridle could start with its WAYLAND_DISPLAY condition
unmet if it raced the env-publish call, silently never starting --
and it's the only listener for the logind Lock signal. Made the start
wait on the environment synchronously. panama-idle also wrote its
generated config to a fixed temp path with no locking, so concurrent
applies could interleave into a corrupt file; switched to mktemp plus
an atomic mv.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ

config/dot/hypr/autostart.lua

@@ -23,8 +23,16 @@ hl.on("hyprland.start", function()
     hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=Hyprland")
     hl.exec_cmd("systemctl --user start hyprland-session.target")
 
-    -- Units: polkit prompts, wallpaper, launcher daemon, idle/lock.
+    -- Units: polkit prompts, wallpaper, launcher daemon, idle/lock. All four
-    hl.exec_cmd("systemctl --user start hyprpolkitagent.service hyprpaper.service vicinae.service hypridle.service")
+    -- carry `ConditionEnvironment=WAYLAND_DISPLAY`, and hl.exec_cmd fires
+    -- commands without waiting for them to finish, so the dbus-update call
+    -- above racing this one is not safe to assume complete -- a lost race
+    -- leaves the Condition unmet and the unit silently never starts (exit 0,
+    -- no error). hypridle is the only listener for the logind Lock signal,
+    -- so that failure mode is "lock-session goes to nobody". Re-import
+    -- synchronously in the same shell invocation first so the Condition
+    -- always sees it, regardless of how the dbus-update call above scheduled.
+    hl.exec_cmd("systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP && systemctl --user start hyprpolkitagent.service hyprpaper.service vicinae.service hypridle.service")
 
     -- The shell: bar, dock, overview, quick settings, notifications, capture.
     -- No systemd unit ships with quickshell, so it runs as a compositor child.

config/dot/quickshell/scripts/panama-idle

@@ -25,6 +25,14 @@ generated="$state_dir/hypridle.conf"
 dropin_dir="${XDG_CONFIG_HOME:-$HOME/.config}/systemd/user/hypridle.service.d"
 dropin="$dropin_dir/panama.conf"
 
+# Set by generate() to the mktemp path it is currently writing, so concurrent
+# invocations (e.g. rapid settings changes each spawning `apply`) never share
+# a tmp file and interleave writes into a corrupt hypridle.conf. Cleared once
+# the atomic mv below lands, so this is a no-op on a normal exit.
+generated_tmp=""
+cleanup() { rm -f "$generated_tmp" 2>/dev/null || true; }
+trap cleanup EXIT
+
 read_setting() {
     local key="$1" fallback="$2"
     [[ -r "$settings" ]] || { printf '%s' "$fallback"; return; }
@@ -53,6 +61,10 @@ generate() {
     load
     mkdir -p "$state_dir"
 
+    # Unique per invocation, in the same directory as the destination so the
+    # final mv is an atomic same-filesystem rename rather than a copy.
+    generated_tmp="$(mktemp "$generated.XXXXXX")"
+
     {
         printf '# Generated by panama-idle from %s\n' "$settings"
         printf '# Do not edit: it is rewritten whenever the idle settings change.\n'
@@ -91,9 +103,10 @@ generate() {
             printf '    on-timeout = systemctl suspend\n'
             printf '}\n'
         fi
-    } >"$generated.tmp"
+    } >"$generated_tmp"
 
-    mv "$generated.tmp" "$generated"
+    mv "$generated_tmp" "$generated"
+    generated_tmp=""
 }
 
 install_dropin() {

install

@@ -49,10 +49,16 @@ gsettings set org.gnome.desktop.session idle-delay 0 2>/dev/null || true
 # still run: a missing optional package should not stop the dotfiles being
 # linked. The summary at the end is what decides whether the install worked,
 # because a failure scrolled past twenty minutes ago is a failure nobody saw.
+#
+# Explicit order, not glob order: change-settings runs `vicinae theme set`,
+# which needs both vicinae itself (installed by install-packages) and the
+# theme files it selects among (symlinked into place by link-dotfiles). New
+# scripts must be added here explicitly, or they will not run at all.
+STAGES=(install-packages link-dotfiles change-settings link-vicinae-scripts)
 failed=()
-for script in "$PANAMA_PATH"/setup/scripts/*; do
+for stage in "${STAGES[@]}"; do
+  script="$PANAMA_PATH/setup/scripts/$stage"
   [[ -x "$script" ]] || continue
-  stage="$(basename "$script")"
   printf '\n=== %s ===\n' "$stage"
   if ! "$script"; then
     failed+=("$stage")

setup/packages/desktop-packages

@@ -32,6 +32,7 @@ mokutil
 mozilla-openh264
 nautilus-extensions
 nautilus-python
+nextcloud-client
 openssl-devel
 opus-devel
 python3-dnf-plugin-versionlock

setup/packages/flatpak-packages

@@ -2,3 +2,5 @@ org.gtk.Gtk3theme.adw-gtk3-dark
 io.github.Foldex.AdwSteamGtk
 com.bitwarden.desktop
 app.bluebubbles.BlueBubbles
+org.mozilla.thunderbird_esr
+io.missioncenter.MissionCenter

setup/packages/hyprland-packages

@@ -8,6 +8,7 @@ gpu-screen-recorder
 grim
 grimblast
 gtk-update-icon-cache
+helium-browser-bin
 hypridle
 hyprland
 hyprland-guiutils

setup/scripts/install-packages

@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 
+set -euo pipefail
+
 # --- Helper functions ---
 log() { echo -e "\033[1;34m[INFO]\033[0m $*"; }
 exists() { command -v "$1" >/dev/null 2>&1; }
@@ -10,33 +12,37 @@ LOCAL_BIN_PATH="$HOME/.local/bin"
 
 echo -e "\n--- Installing Repositories ---"
 log "Installing RPM Fusion Free and Nonfree Repositories"
-sudo dnf install -y https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm > /dev/null 2>&1
+sudo dnf install -y https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm > /dev/null
 log "Enabling Fedora Cisco OpenH264 Repository"
 sudo dnf config-manager setopt fedora-cisco-openh264.enabled=1
 log "Installing RPM Fusion AppStream Metadata"
-sudo dnf update @core -y > /dev/null 2>&1
+sudo dnf update @core -y > /dev/null
-sudo dnf install -y rpmfusion-\*-appstream-data > /dev/null 2>&1
+sudo dnf install -y rpmfusion-\*-appstream-data > /dev/null
 log "Installing Terra Repository"
-sudo dnf install -y --nogpgcheck --repofrompath 'terra,https://repos.fyralabs.com/terra$releasever' terra-release > /dev/null 2>&1
+sudo dnf install -y --nogpgcheck --repofrompath 'terra,https://repos.fyralabs.com/terra$releasever' terra-release > /dev/null
 
 echo -e "\n--- Installing relevant packages ---"
 log "Updating all packages. This may take a while"
-sudo dnf update -y --refresh > /dev/null 2>&1
+sudo dnf update -y --refresh > /dev/null
 
 log "Updating core, multimedia, and sound-and-video groups"
+# A trailing `&& sync` here previously meant a failing groupupdate was exempt
+# from set -e (bash does not apply -e to the left side of a && list), so the
+# failure went unreported. Sync unconditionally on its own line instead.
 sudo dnf4 groupupdate -y 'core' 'multimedia' 'sound-and-video' \
     --setop='install_weak_deps=False' \
     --exclude='PackageKit-gstreamer-plugin' \
-    --allowerasing && sync > /dev/null 2>&1
+    --allowerasing > /dev/null
+sync
 log "Swapping ffmpeg-free for ffmpeg"
-sudo dnf swap -y 'ffmpeg-free' 'ffmpeg' --allowerasing > /dev/null 2>&1
+sudo dnf swap -y 'ffmpeg-free' 'ffmpeg' --allowerasing > /dev/null
 log "Swapping mesa-va-drivers for mesa-va-drivers-freeworld"
-sudo dnf swap -y mesa-va-drivers mesa-va-drivers-freeworld > /dev/null 2>&1
+sudo dnf swap -y mesa-va-drivers mesa-va-drivers-freeworld > /dev/null
 log "Upgrading Multimedia group with optional packages"
-sudo dnf4 group upgrade -y --with-optional Multimedia > /dev/null 2>&1
+sudo dnf4 group upgrade -y --with-optional Multimedia > /dev/null
 log "Installing GStreamer plugins (bad, good, base)"
 sudo dnf install -y gstreamer1-plugins-{bad-\*,good-\*,base} \
-    --exclude=gstreamer1-plugins-bad-free-devel > /dev/null 2>&1
+    --exclude=gstreamer1-plugins-bad-free-devel > /dev/null
 
 # --- Install all initial packages ---
 PACKAGES_FILE="$PANAMA_PATH/setup/packages/initial-packages"
@@ -45,12 +51,25 @@ if [[ -f "$PACKAGES_FILE" ]]; then
 	log "Installing Initial Packages"
   echo -e "Includes the following packages:"
   echo -e "$(<"$PACKAGES_FILE")"
-	sudo dnf install -y "$INITIAL_PACKAGES" > /dev/null 2>&1
+	sudo dnf install -y $INITIAL_PACKAGES > /dev/null
 	log "Initial packages installed!"
 else
 	log "Package list was not in specified path: $PACKAGES_FILE"
 fi
 
+# --- Install Desktop Packages ---
+DESKTOP_FILE="$PANAMA_PATH/setup/packages/desktop-packages"
+if [[ -f "$DESKTOP_FILE" ]]; then
+	DESKTOP_PACKAGES=$(tr "\n" " " <"$DESKTOP_FILE")
+	log "Installing Desktop Packages"
+  echo -e "Includes the following packages:"
+  echo -e "$(<"$DESKTOP_FILE")"
+	sudo dnf install -y $DESKTOP_PACKAGES > /dev/null
+	log "Desktop packages installed!"
+else
+	log "Package list was not in specified path: $DESKTOP_FILE"
+fi
+
 # --- Install oh-my-posh if not already installed. ---
 mkdir -p "$LOCAL_BIN_PATH"
 if [[ -x "$LOCAL_BIN_PATH/oh-my-posh" ]]; then
@@ -67,7 +86,7 @@ if [[ -f "$DEV_FILE" ]]; then
 	log "Installing Development Packages. Mostly for Neovim."
   echo -e "Includes the following packages:"
   echo -e "$(<"$DEV_FILE")"
-  sudo dnf install -y $DEV_PACKAGES > /dev/null 2>&1
+  sudo dnf install -y $DEV_PACKAGES > /dev/null
 	log "Development packages installed!"
 else
 	log "Package list was not in specified path: $DEV_FILE"
@@ -78,12 +97,12 @@ fi
 HYPR_FILE="$PANAMA_PATH/setup/packages/hyprland-packages"
 if [[ -f "$HYPR_FILE" ]]; then
 	log "Enabling Hyprland COPR"
-	sudo dnf copr enable -y lionheartp/Hyprland > /dev/null 2>&1
+	sudo dnf copr enable -y lionheartp/Hyprland > /dev/null
 	HYPR_PACKAGES=$(tr "\n" " " <"$HYPR_FILE")
 	log "Installing Hyprland desktop packages"
 	echo -e "Includes the following packages:"
 	echo -e "$(<"$HYPR_FILE")"
-	sudo dnf install -y --setopt=install_weak_deps=False $HYPR_PACKAGES > /dev/null 2>&1
+	sudo dnf install -y --setopt=install_weak_deps=False $HYPR_PACKAGES > /dev/null
 	log "Hyprland packages installed!"
 else
 	log "Package list was not in specified path: $HYPR_FILE"
@@ -96,3 +115,18 @@ else
   log "Installing Bun via curl..."
   curl -fsSL https://bun.sh/install | bash > /dev/null 2>&1
 fi
+
+# --- Install Flatpak Packages ---
+FLATPAK_FILE="$PANAMA_PATH/setup/packages/flatpak-packages"
+if [[ -f "$FLATPAK_FILE" ]]; then
+	FLATPAK_PACKAGES=$(tr "\n" " " <"$FLATPAK_FILE")
+	log "Adding Flathub remote"
+	sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo > /dev/null
+	log "Installing Flatpak Packages"
+	echo -e "Includes the following packages:"
+	echo -e "$(<"$FLATPAK_FILE")"
+	sudo flatpak install -y flathub $FLATPAK_PACKAGES > /dev/null
+	log "Flatpak packages installed!"
+else
+	log "Package list was not in specified path: $FLATPAK_FILE"
+fi

setup/scripts/link-dotfiles

@@ -63,6 +63,12 @@ for dir in "${dirs[@]}"; do
   if [ -d "$CONFIG/$dir" ]; then
     mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
     log "Moved existing $dir config to $PANAMA_OLD/$dir"
+  # A regular file at this path (not a directory, not a symlink) is missed by
+  # the guards above, so `ln -s` below would fail with "File exists" -- back
+  # it up the same way.
+  elif [ -f "$CONFIG/$dir" ]; then
+    mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
+    log "Moved existing $dir file to $PANAMA_OLD/$dir"
   fi
 
   # Create symlink