Give the revealed Dock back the pointer that revealed it

The bottom dock came up when the cursor reached the edge and hid again a
quarter-second later with the cursor still sitting there.

The input region has two shapes: a three-pixel strip along the whole edge while
hidden, and a region over the body once revealed. Teaching the dock about left
and right rewrote both, and the bottom case was folded into the branch that
serves a left dock -- x 0. That is right for a dock that hugs the left edge and
wrong for one that is centred on the bottom: the region landed on the left third
of the screen while the pointer that summoned the dock was in the middle. Hover
dropped on the very frame the dock arrived, and the hide timer did the rest.
Approaching from the far left worked, which is the only reason it looked
intermittent rather than broken.

Bottom is centred, so the region starts where the body starts.

Nothing measured the input region, which is why "bottom is unchanged" passed
while bottom was broken -- the contract read the window and the window was
fine. It now probes the mask in both states on all three edges and asserts the
point a hand actually aims at, the middle of the edge the dock lives on, is
still inside the region after the dock arrives. It fails on the old binding
with the coordinates that were wrong.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj

tests/quickshell/dock-position-contract.sh

@@ -18,6 +18,11 @@
 #   6. The drag grip sets preventStealing. Without it the settings page's own
 #      Flickable claims the vertical gesture and the row never moves -- which is
 #      the exact objection this feature was refused over for a long time.
+#   7. The point that reveals the dock is still inside the input region once the
+#      dock has revealed. The region follows the body, and a bottom dock is
+#      centred while its reveal strip spans the whole edge -- so a region that
+#      forgets the body's own offset lands somewhere the pointer is not, hover
+#      drops on the frame the dock arrives, and it hides under a still cursor.
 #
 # The geometry checks launch isolated shells against a temporary config. The
 # real settings are read to build them and never written.
@@ -81,7 +86,7 @@ for start, targets in [(0, [1, 2, 3, 4]), (4, [3, 2, 1, 0]), (2, [3]), (2, [1]),
         raise SystemExit(f'starting at {start} through {targets} produced {working}')
 PY
 
-# ── 1, 2. Geometry, measured ────────────────────────────────────────────────
+# ── 1, 2, 7. Geometry, measured ────────────────────────────────────────────────
 
 cat >"$shell_dir/dock-position-probe.qml" <<'QML'
 import Quickshell
@@ -90,6 +95,19 @@ import qs.modules.dock
 
 ShellRoot {
     Dock { id: probe }
+
+    // The input region is measured in both states, because the bug it exists
+    // for lives in the transition between them: a region that stops covering
+    // the pointer the moment the dock arrives takes the hover away with it.
+    function report(state) {
+        const m = probe.mask.item;
+        console.warn("MASKGEOM " + probe.position + " " + state
+            + " surfaceW=" + Math.round(probe.width)
+            + " surfaceH=" + Math.round(probe.height)
+            + " x=" + Math.round(m.x) + " y=" + Math.round(m.y)
+            + " w=" + Math.round(m.width) + " h=" + Math.round(m.height));
+    }
+
     Timer {
         interval: 1200; running: true
         onTriggered: {
@@ -97,6 +115,26 @@ ShellRoot {
                 + " vertical=" + probe.vertical
                 + " w=" + Math.round(probe.width)
                 + " h=" + Math.round(probe.height));
+            probe.revealed = false;
+            hidden.start();
+        }
+    }
+    // Long enough for the slide to finish; the region follows the body, so
+    // measuring mid-animation measures nothing in particular.
+    Timer {
+        id: hidden
+        interval: 400
+        onTriggered: {
+            report("hidden");
+            probe.revealed = true;
+            shown.start();
+        }
+    }
+    Timer {
+        id: shown
+        interval: 400
+        onTriggered: {
+            report("revealed");
             Qt.quit();
         }
     }
@@ -117,15 +155,20 @@ out.parent.mkdir(parents=True, exist_ok=True)
 out.write_text(json.dumps(data))
 PY
     ( cd "$shell_dir" && XDG_CONFIG_HOME="$work" timeout 40 qs -p ./dock-position-probe.qml 2>&1 ) \
-        | grep -o 'DOCKGEOM .*' | head -1
+        | grep -oE '(DOCKGEOM|MASKGEOM) .*'
 }
 
 bottom="$(measure bottom)"
 [[ -n "$bottom" ]] || fail 'the bottom dock produced no geometry at all'
 left="$(measure left)"
 [[ -n "$left" ]] || fail 'the left dock produced no geometry at all'
+right="$(measure right)"
+[[ -n "$right" ]] || fail 'the right dock produced no geometry at all'
 
-python3 - "$bottom" "$left" <<'PY' || fail 'a dock does not span the edge it lives on'
+# The span checks read the window; the region checks read every line.
+first_dock() { grep -o 'DOCKGEOM .*' <<<"$1" | head -1; }
+
+python3 - "$(first_dock "$bottom")" "$(first_dock "$left")" <<'PY' || fail 'a dock does not span the edge it lives on'
 import re, sys
 
 def read(line):
@@ -152,4 +195,44 @@ if left_w >= bottom_w or bottom_h >= left_h:
     raise SystemExit('the two orientations are not thin on opposite axes')
 PY
 
+# ── 7. The pointer that reveals the dock is still inside the region ─────────
+
+python3 - "$bottom" "$left" "$right" <<'REGION' || fail 'revealing the dock moves the input region off the pointer that revealed it'
+import re, sys
+
+FIELDS = re.compile(
+    r'MASKGEOM (\w+) (\w+) surfaceW=(\d+) surfaceH=(\d+) '
+    r'x=(-?\d+) y=(-?\d+) w=(-?\d+) h=(-?\d+)')
+
+def regions(blob):
+    found = {}
+    for line in blob.splitlines():
+        m = FIELDS.search(line)
+        if m:
+            found[m.group(2)] = (m.group(1),) + tuple(int(g) for g in m.groups()[2:])
+    return found
+
+# Where a hand actually goes to summon the dock: the middle of the edge it
+# lives on, a pixel in from that edge.
+def aim(position, surface_w, surface_h):
+    if position == "left":
+        return 1, surface_h / 2
+    if position == "right":
+        return surface_w - 1, surface_h / 2
+    return surface_w / 2, surface_h - 1
+
+for blob in sys.argv[1:]:
+    found = regions(blob)
+    for state in ("hidden", "revealed"):
+        if state not in found:
+            raise SystemExit(f'the probe reported no {state} input region')
+        position, surface_w, surface_h, x, y, w, h = found[state]
+        px, py = aim(position, surface_w, surface_h)
+        if not (x <= px <= x + w and y <= py <= y + h):
+            raise SystemExit(
+                f'the {position} dock {state} takes input over x {x}..{x + w}, '
+                f'y {y}..{y + h}, which does not contain the pointer at '
+                f'({px:.0f}, {py:.0f})')
+REGION
+
 printf 'dock position contract: ok\n'