GNOME's Wi-Fi panel has this and it is the most-used thing in it: the
alternative is reading a passphrase out loud. Network & Devices now shows
a scannable code for any saved network whose passphrase this user can
read.
The image contains the network password in machine-readable form, so
most of the care here is about that rather than about QR codes. It is
written under XDG_RUNTIME_DIR -- 0700, on tmpfs, gone at logout --
rather than /tmp, which is shared; the file is 0600; the passphrase is
piped to qrencode on stdin rather than passed as an argument, because
argv is world-readable through /proc for as long as the process runs;
and it is never printed or included in an error message. Generated on
demand, because producing a code for every saved network up front means
writing images of passwords nobody asked to see.
Enterprise networks are listed as not shareable rather than offered and
broken: there is no passphrase to encode, so the code could not work.
Two bugs the contract caught while being written. Semicolons in an SSID
were not escaped -- the sed replacement had one backslash where its four
neighbours have two, so sed dropped it, and an SSID containing a
semicolon would have produced a QR code describing a different network.
And nmcli's trailing newline landed inside the payload; it decoded here,
but a newline in the middle of a WIFI: URI is not something every phone
tolerates, and that failure would present as "the QR code just doesn't
work on my phone".
The contract stubs nmcli and qrencode, because the real ones would write
this machine's actual Wi-Fi password into a fixture directory. It
asserts the escaping, the absence of a newline, the file and directory
modes, that no temporary payload survives, and that the passphrase never
reaches argv.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The same Power Saver / Balanced / Performance choice GNOME's Power panel
offers, and the daemon behind it was already running here -- it simply
had no control anywhere in Panama. This machine has been sitting on
"performance" with nothing to say so.
Talks to the net.hadess.PowerProfiles interface rather than to a binary.
Fedora 44 implements it with tuned-ppd instead of power-profiles-daemon,
and powerprofilesctl is not installed at all, so anything shelling out
to that command would have found nothing while the service was right
there. Setting a profile needs no privileges: the daemon accepts a
property write from the active session user.
Not a stored preference. The daemon owns the profile, it survives Panama
restarts, and anything else on the system can change it, so a copy in
settings.json would drift -- the same reasoning as monitor brightness.
PerformanceDegraded is surfaced because it is what makes the setting a
lie: a thermally throttled machine reports "performance" while behaving
otherwise, and that is worth saying out loud.
The contract stubs busctl, because the real daemon is a system service
shared with everything else on the machine and a test that flipped the
daily driver to power-saver and then died would leave it there. It pins
the parsing in particular: busctl renders the Profiles property flat, so
profile names and driver names arrive in one stream, and a pattern loose
enough to match both reports the driver as an extra profile. On this
machine the driver is called "tuned", which reads exactly like a
plausible fourth profile -- verified the contract catches that, and
catches an unvalidated name reaching the system service.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
This contract failed intermittently with "a typed batch did not reach
the compositor", reporting Panama's shipped defaults, and passed on
retry. The earlier guard against a lingering harness was not the cause --
no instance was alive.
Adding the writer's own error to the failure message settled it: the
writer reports NO error while the compositor holds defaults. A rejected
write leaves an error behind; a write that succeeded and was then
overwritten does not. Both this contract and the LIVE shell write to the
same compositor, and the running Panama re-applies its own preferences
on any store change -- landing exactly the values that were being
mistaken for "the write never happened".
So the apply is re-issued periodically while waiting, which makes the
test survive being overwritten without weakening what it asserts, and
the failure message now distinguishes the two cases instead of
describing both as a write that never arrived.
The wait is also 10 seconds rather than 4. The write path verifies every
option by reading it back and retries a refused batch, so a loaded
machine legitimately takes longer -- and this runs in a suite alongside
other tests driving the same compositor.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The keyring is already unlocked at sign-in exactly as GNOME does it --
pam_gnome_keyring is in GDM's stack and the journal confirms it works
("gnome-keyring-daemon started properly and unlocked keyring"). So there
was no configuration bug to fix. What a bare Hyprland session lacks is
anywhere to see when that has stopped being true.
It stops being true rarely and expensively. gnome-keyring-daemon crashed
once on this machine -- an upstream abort in service_method_open_session,
with a core dump -- and D-Bus then activated a replacement. That
replacement never received the login password, so the keyring was locked
in the middle of a session that had unlocked it correctly at login.
Nothing announces this. What you see instead is a mail account that will
not authenticate, a git push that cannot find its key, or an integration
reporting "not configured", none of which mention keyrings. That is the
same root cause as the Home Assistant token failure earlier.
Privacy & Security now shows the state, offers an Unlock action that
raises the standard password dialog, and reports when the daemon holding
your secrets is a D-Bus replacement rather than PAM's -- because a
replacement that is currently unlocked was unlocked by hand and will not
survive a restart. The password never passes through Panama.
The contract stubs the secret service rather than touching the real one:
locking the login keyring breaks every saved password on the machine and
can only be undone by typing the password into a dialog, so it is not
something a test suite may do to a daily driver. Verified it catches a
helper that misreports locked as unlocked, and one that crashes instead
of reporting a missing service.
Worth recording: a locked keyring makes a NON-INTERACTIVE caller appear
to hang. It is not hung -- it is waiting on a dialog nobody is looking
at, which is exactly how the earlier secret-tool investigation lost an
hour.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Reported symptom: Electron applications and a Chromium-based browser,
all set to follow the system, went light when the desktop went light and
never came back. Nothing reported an error, and the portal was serving
the correct value the whole time.
Cause: ColorScheme set gtk-theme to "Adwaita-dark" for dark and
"Adwaita" for light. Neither is installed on Fedora 44 -- only adw-gtk3
and adw-gtk3-dark are. GTK responds to an unknown theme name by falling
back to its built-in default, which is LIGHT. So asking for light worked
by accident, asking for dark silently produced light, and anything that
takes its cue from the GTK theme rather than the portal stayed light no
matter what org.freedesktop.appearance said. Verified: the portal emits
correctly in both directions, so this was never the portal's fault.
Second cause, the mirror of the first: gtk-3.0/settings.ini and
gtk-4.0/settings.ini were pinned to adw-gtk3-dark and prefer-dark=1 and
never regenerated. Under GNOME that file is ignored because
gnome-settings-daemon publishes over XSETTINGS; under Hyprland nothing
does, so for GTK3 it is authoritative -- and it contradicted the scheme
in light mode. They are now generated from a template on every switch,
gitignored as machine state, and seeded by link-dotfiles, the same shape
kitty's current-theme.conf already uses. These directories are symlinked
into the repository, so writing the live file directly would dirty the
working tree on every theme switch.
The failure was silent by construction, so it gets a test rather than a
comment: gtk-theme-contract asserts every theme name Panama sets is
actually installed, and that the generated GTK config agrees with the
scheme in both directions. Verified it catches both original bugs.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
It is the system settings app for this desktop, so it is named the way
one is. The window is "Settings", the titlebar is "Settings", the
wordmark above the search field is gone, the sidebar's last row is
"About", and the status line reads "Desktop is healthy".
Prose followed the same rule. Forty-odd strings explained what "Panama"
does -- "Panama never animates while idle", "Restore Panama defaults",
"Panama looks in ~/Pictures/Wallpapers" -- which is how a product
describes itself, not how a settings panel describes a setting. They now
say what happens. No user-visible "Panama" remains anywhere in the app.
Two consequences worth naming:
The SUPER+I shortcut's description is user-visible, because the
Shortcuts page is generated from it, so that is renamed too. Rebindings
are keyed by shipped chord rather than description, so no existing
override is orphaned by this.
Three contracts matched the window by title and one matched that
shortcut by description; all four are updated. There are no Hyprland
window rules keyed on the title, so nothing about the window's placement
changes.
The desktop entry is now Name=Settings, but the FILE keeps its
panama-settings name, as does the icon: the dock pins applications by
desktop id, and renaming the file would silently unpin it.
dock-pins-contract covers exactly that.
The dated design docs under docs/superpowers keep the old name. They are
a record of what was decided when, and editing them to agree with the
present would make them lie about the past.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
With I2C access granted, the helper still found nothing: every connected
monitor was probed on the wrong bus.
A connector has two. The `ddc` symlink points at the classic I2C line
that carries EDID on HDMI and DVI. DisplayPort carries DDC/CI over the
AUX channel instead, which appears as a child directory of the
connector. Both exist on a DP connector and both resolve, so the wrong
choice looks entirely reasonable and simply finds no monitor: this
machine's DP-2 has ddc -> i2c-5, where ddcutil reports "No monitor
detected", while its AUX child i2c-9 answers VCP 0x10 immediately.
This is the guess the previous commit said was unverified, and it was
wrong in the way that mattered. Enumerating from sysfs is still right --
it gives the connector name Hyprland uses and skips empty connectors --
but it has to prefer the AUX child and fall back to the symlink.
The fixture now mirrors sysfs properly: /sys/class/drm/<connector> is a
SYMLINK to the real device directory, and `find` does not follow the
path it is given. A fixture built from plain directories passes whether
or not the code resolves the symlink first, which is a test that agrees
with itself rather than with the kernel.
Verified on hardware: the Kuycon P20 reports 100%, accepts 70 and
returns to 100, and the media keys move it through codex's OSD path.
Both bus-selection mistakes are now caught by the contract.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
settings-hyprland-write-contract failed in full suite runs and passed on
its own, reporting "a typed batch did not reach the compositor" with
every value at its default.
Both it and settings-commit-reset-contract drive the same harness file,
and Quickshell identifies an instance by its config path -- not by the
environment it was launched with. So when one run's instance has not
fully exited, the other's wait for `ipc show` is satisfied by that
instance's target, and the whole contract then talks to a shell it did
not start.
The two directions fail differently, and the second is the alarming one:
The write contract lands on the isolated instance, whose compositor
write seam is deliberately stubbed. Its writes go nowhere, which is
exactly the symptom above.
The commit/reset contract lands on the non-isolated instance and
drives the DAILY DESKTOP's real compositor while believing it is
isolated.
Both now refuse to start while another instance of that harness is
alive, and say which hazard they are avoiding rather than failing on an
assertion much later.
One trap worth naming, since it bit me writing this: `rg -c` prints
nothing at all when there are no matches, so an unguarded command
substitution yields "" and not "0" -- the first version of the guard
fired on a perfectly clean machine.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
GNOME's Search panel configures which applications provide results in
gnome-shell's overview and which folders are indexed. gnome-shell does
not run here, so reimplementing those switches would store preferences
that change nothing. Under Panama searching is the launcher's job and
Vicinae carries its own preferences, so the Applications page says where
search lives and how to rebind the keys that open it, rather than
offering settings that would be inert or duplicated.
The nav contract is the more useful half. Adding a settings page means
editing four files, and missing any one of them fails quietly in a
different way: no sidebar row, a row that silently shows Home, a deep
link that redirects to Home, or -- worst -- a missing qmldir entry,
which makes the page "not a type" and takes the entire settings window
down with it. Nothing at runtime cross-checks the four. Having just
added four pages by hand, this checks them statically, and also fails on
a page file that exists but is unreachable.
Verified it catches a missing qmldir registration and a missing
allow-list entry.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
brightnessctl drives the kernel backlight class, which laptop panels
have and this desktop does not -- it reports only keyboard and NIC LEDs.
So BrightnessControl removed itself and there was no way to dim the
screen from Panama at all. DDC/CI is the channel the buttons on a
monitor's bezel drive, and it is the only brightness an external display
has. Both sources now render a row each, so a machine gets whichever it
actually has, or none.
Displays are enumerated from sysfs rather than `ddcutil detect`. The
kernel publishes the connector-to-bus mapping as
/sys/class/drm/<card>-<connector>/ddc along with whether anything is
plugged in, which beats parsing detect's undocumented brief output,
yields the connector name spelled exactly as Hyprland spells it, and
probes only connectors with a monitor attached -- one bus on this
machine rather than fourteen, where each empty bus costs a timeout.
No model name is read: Hyprland already knows what every output is
called, so the UI joins on the connector instead of keeping a second
source of truth that could disagree with the Displays page.
Writes are debounced, serial, and read back. Serial because DDC/CI has
no arbitration and two ddcutil processes on one bus interleave their
exchanges and both return garbage. Read back because a write is not a
promise: panels clamp to their own range, ignore values while waking
from standby, and drop writes that arrive too fast. Without the read the
slider would show what Panama asked for rather than what the monitor
did, which is the same class of lie as trusting `hyprctl keyword`.
Brightness is deliberately not a stored preference. The monitor
remembers it and the bezel buttons change it behind Panama's back, so
persisting it would mean restoring a value the panel had moved past.
The contract runs against fixtures with ddcutil stubbed and both sysfs
roots redirected, so it never touches a real monitor. Its fixture
reports a maximum of 200 rather than 100 on purpose -- at 100 the
scaling arithmetic is the identity and a helper that ignored the
reported maximum would pass everything. Verified it catches that, plus a
dropped connection-status filter and an unstripped connector prefix.
Not yet confirmed against hardware: this machine cannot open any I2C bus
yet. ddcutil's udev rule grants that through uaccess but only to devices
created after it was installed, so it needs one udevadm trigger. The
helper detects exactly that case and returns the command as its error
rather than reporting "no displays".
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Both tests run against the live session and capture "what it was before"
so they can put it back. Neither checked that what they found was sane,
so one interrupted run poisoned every run after it -- and because each
subsequent run faithfully restored the bad value, the desktop stayed
broken while the failure looked like an ordinary flake.
displays-contract left the monitor at scale 1.25 after a failed revert.
The next run recorded 1.25 as the original and restored the desktop to
it. It now reads the shipped scale out of monitors.lua and refuses to
run when the live display disagrees. A failure to parse that value is
fatal rather than skipped, because silently skipping the check is how
the laundering happened in the first place.
focus-session-expiry kills and restarts the shell mid-session, so an
interrupted run leaves caffeine on with nothing left to turn it off. The
next `focus start` recorded "previously on", handed it back on expiry,
and failed the assertion that caffeine ends off -- identically, forever,
with the desktop unable to idle or lock the entire time. It now refuses
to start unless caffeine is already off, which is the only state in
which the test can tell "restored correctly" from "never released".
Both guards name the exact command to recover with. Verified each fires
on a dirty state and passes on a clean one; caffeine was found latched
on this machine and has been released.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Panama Settings shipped with Icon=preferences-system-symbolic, a
monochrome glyph drawn for 16px toolbar use. Beside full-colour
application icons in a 48px dock it reads as a missing icon rather than
a quiet one. It now has its own: a gear, because a settings icon has to
be recognisable before it is clever, rendered in the Prism gradient on
the dark tile so it belongs to this desktop.
An earlier attempt drew the gear as a ring with radial strokes; at dock
size the strokes merged into the ring and it read as an X. The shipped
version is a real toothed outline, checked at 48px rather than only at
128.
The dock also pinned GNOME Settings first. Panama now covers what GNOME
Settings did for this desktop and delegates the remainder to it by name,
so pinning the thing it delegates TO put the fallback in front of the
real one. GNOME Settings stays installed and searchable.
link-dotfiles installs icons alongside desktop entries, so this survives
a fresh setup rather than being a file that happens to exist here.
The new contract asserts every pinned application resolves to an
installed desktop entry. DockBody drops an unresolvable pin rather than
drawing a broken icon, which is right at runtime and invisible to debug:
a typo or a renamed desktop id just removes an icon with nothing logged.
It also cost me a false negative while writing it -- DesktopEntries
populates asynchronously, and asking too early reports every pin as
missing.
Also makes tests/quickshell/osd-ui-contract.sh executable. It was
committed mode 644, the only test in the suite that was, so the runner
could not invoke it. It passes.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The last two values that could only be changed by editing a file.
Weather was pinned to hardcoded coordinates, so the card could not be
pointed anywhere else. It is a location search now, not latitude and
longitude fields: nobody knows their own coordinates, and a control that
demands them is one nobody uses. Open-Meteo's geocoding endpoint needs
no key, the same reason the forecast already uses them. Only the search
term leaves the machine -- the stored place name is a label -- and
coordinates are rounded to four decimals, far finer than a weather
reading resolves and coarse enough to keep a precise home location out
of the settings file.
The graphics readout was hardcoded to card1. This machine has two amdgpu
cards, discrete and integrated, so that was right only by luck, and the
path is meaningless on any other machine. GPUs are enumerated with a
readable name from lspci, since sysfs exposes only numeric ids, and the
picker appears only when there is more than one to choose between. A
stored path the machine does not have is refused and reported rather
than silently measuring nothing.
Also merges the per-application notification rules UI. Its three commits
were believed integrated but the page half was not actually in the tree:
main had the service side in Notifs.qml and zero references to
setAppRule in NotificationsPage. Ancestry is not content.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Network & Devices was 92 lines and two buttons that opened GNOME. It now
scans, joins, and pairs directly through Quickshell.Networking and
Quickshell.Bluetooth -- NetworkManager and BlueZ over DBus, no shelling
out to nmcli or bluetoothctl. That was the founding requirement for this
desktop: never having to drop to a terminal to join a network.
Scanning follows the page being visible. Wi-Fi scanning and especially
Bluetooth discovery hold the radio, and running either for a list nobody
is looking at spends airtime on nothing.
Joining a secured network gets a real password field, not the clipboard
popover's search box with different placeholder text: a Wi-Fi key typed
into a field that echoes it is readable by anyone behind you, and a
search glyph in front of a password prompt is simply wrong.
Two bugs found by looking at the rendered page, both silent:
The device lookups used enum names that do not exist --
NetworkDeviceType.Wifi rather than DeviceType.Wifi -- so both returned
null and the page reported "No Wi-Fi adapter" on a machine whose Wi-Fi
was connected. Nothing was logged; QML resolves an unknown enum member
to undefined and compares happily.
signalStrength is 0.0-1.0, not a percentage, so thresholds written for
0-100 put every network including the connected one in the bottom
bucket. The labels now use the same buckets as the icons in
quicksettings/WifiList.qml so the two cannot disagree.
The contract compares what the service resolves against what nmcli
reports, rather than only checking that nothing crashed.
Also makes the Home Assistant bridge hermetic: resolve_config read the
user's private env file even when a caller supplied an explicit
environment, so adding a real PANAMA_HOME_ASSISTANT_ENTITIES to that
file silently overrode a fixture asserting the legacy fallback. An
explicit environment is now the whole environment; production still
reads the file. Its live contract skips when no token is configured --
an absent credential is not a defect, and a suite expected to be red
stops being read -- while a configured-but-broken bridge still fails.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Resolution, refresh rate, scale, and rotation, applied through
hl.monitor{} and stored per output.
This is the only setting in Panama where a wrong value can leave the
user unable to SEE the screen well enough to undo it: a mode the panel
cannot show, or a scale that makes everything unreadable, is not
recoverable through the UI that caused it. So a change is never applied
irreversibly. It is applied, then reverted automatically after fifteen
seconds unless confirmed, and confirming is what writes it to the
settings store -- letting the countdown run leaves nothing behind.
The contract tests that property specifically: it applies a scale, waits
out the countdown, and asserts the display came back and that nothing
was stored. A regression there is not a broken feature, it is a user
staring at a blank monitor.
Modes are grouped by resolution with refresh rates beside them. The
panel reports 35, many differing only in refresh-rate rounding -- 60.00
and 59.94 -- which as a flat list of buttons is noise rather than
choice; equal rounded pairs collapse, leaving 21.
Only mode, scale, and transform are configurable. Colour management and
bit depth stay in monitors.lua because they carry a documented screencopy
tradeoff that a settings page cannot explain at the moment you would be
changing it.
Also replaces the display policy rows with the schema-bound ones, so the
page no longer restates labels that PreferenceSchema already holds.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Every bind in keybinds.lua now goes through a small wrapper that
substitutes the chord from a stored override. Only the chord is taken
from settings; the action is always the Lua value written in that file,
so an override can move a shortcut but can never make one do something
else. That is the property that makes reading them from a file the user
can edit safe, and it is why the alternative -- storing dispatchers --
was not considered.
Overrides are keyed by the shipped chord rather than the description.
Keying by description moved every bind that shared one: rebinding
SUPER+C also moved the XF86Calculator hardware key onto the same chord,
silently costing it. Chords are unique; descriptions are not.
Applying needs hyprctl reload rather than a live hl.bind. Hyprland
reports Lua-defined binds with dispatcher "__lua" and a bytecode offset,
so the action cannot be reconstructed from outside to re-bind it; reload
re-runs the config, which re-reads the settings file.
The capture control ignores modifier-only presses, because every chord
passes through them and holding Super would otherwise be captured the
moment the modifier went down. It refuses a bare letter, which would
swallow ordinary typing, and refuses a key with no keysym name rather
than storing something that would fail to bind. Rebinding onto a chord
already in use is refused rather than shadowing the existing shortcut.
The refactor was verified by snapshotting all 113 binds before and
after: the keymap is byte-identical, and identical again after applying
an override and resetting it.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The Dock's pinned applications were a sixteen-entry literal in
Settings.qml, so changing what sits in the Dock meant editing QML. They
are now an ordered list in the shared store, with move up, move down,
unpin, and a filtered picker for adding installed applications. Keeping
them in the shared store rather than a file of their own means they are
covered by Restore defaults like everything else.
This needed a "json" schema type for values the schema stores and resets
but does not validate field by field. It exists so structured settings
can live in the one file rather than growing a fourth preference store;
the owning service validates the contents.
Snapshots make the settings app safe to experiment with. The whole
configuration is one file, so a backup is a copy and a restore is an
overwrite, and restoring snapshots what it replaces so it is itself
undoable. A snapshot is validated as JSON before it can be restored over
a working configuration, and a name that is not a plain snapshot
filename from the backup directory is refused.
Snapshot names carry milliseconds. At one-second resolution a save
followed promptly by a restore produced the same filename twice, and the
restore's own safety snapshot overwrote the file it was about to read --
found by the contract, which restores immediately after saving.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Continues the settings expansion toward replacing GNOME Settings for
everything Panama actually owns.
Wallpaper. A thumbnail grid rather than a path field: the value of this
setting is the picture, so typing a path to something you cannot see is
the worst version of it. Two things about hyprpaper 0.8 shaped this. Its
IPC is much smaller than older documentation suggests -- preload,
listloaded, unload, and reload all answer "invalid hyprpaper request",
so setting is a single call with no preload. And the "<empty>,<path>"
form that used to mean every output is silently ignored, so a wallpaper
set that way appears to succeed and never changes; outputs are walked
explicitly instead. hyprpaper.conf lives in the repo through the
~/.config/hypr symlink and so cannot hold machine state, which is why
the choice lives in the shared settings store and is re-applied at
startup.
Power & Lock. hypridle has no IPC for reconfiguration and its config is
hyprlang rather than the shared JSON, so scripts/panama-idle generates a
config from the settings store and restarts the daemon. The generated
file lives under XDG_STATE_HOME for the same symlink reason, with a
systemd drop-in pointing hypridle at it. Management is a real state and
the page says which one you are in rather than showing sliders that
quietly do nothing. Zero means never for all three timers, which a naive
template would render as "immediately".
Date & Time. Deliberately not stored in Panama's settings: the timezone
and network time belong to the machine and are shared with sessions that
never see this file. Storing a copy would create a second answer to a
question the system already answers. Reads and writes timedatectl
directly; a cancelled polkit prompt surfaces as an error rather than as
a value that appears to have been accepted.
Accessibility. Pointer size and text scale have to agree across three
consumers with no shared configuration -- the compositor, GTK, and the
shell -- so the store is the source of truth and the values are pushed
outward to gsettings and hyprctl setcursor.
Search now indexes the schema instead of the twelve page labels. "gaps",
"wallpaper", and "screenshot" previously found nothing on an app that
has all three, which is the clearest way a settings app feels smaller
than it is. Shortcuts are indexed by what they do. A contract asserts
every non-internal schema label is reachable, so a new setting cannot be
added in an undiscoverable state.
The GNOME delegation allow-list was widened to the panel names
gnome-control-center actually reports; the previous list contained
"users", which is not one of them and so opened nothing.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Stage 3 and 4 of docs/superpowers/plans/2026-08-17-panama-cohesion.md.
Add SettingsPage plus ToggleRow, SliderRow, ChoiceRow, ActionRow, and
TextRow. A row names a schema key and needs nothing else: label, detail,
range, and unit come from PreferenceSchema, and writes go through
SystemSettings.commitPreference, which routes compositor-backed keys
through apply-and-verify and local keys straight to the store. The page
scaffold that was copy-pasted eleven times is now one component.
Rebuild Appearance around a live preview of the real desktop, scaled by
the ratio between the preview and the actual monitor so a 10px gap on a
4500px display looks as small as it is. Rebuild Desktop & Dock and Input
& Shortcuts on the shared rows, replacing the read-only text that stood
in for controls that were merely expensive to add.
Generate the shortcut list from hyprctl binds. The page held a
hand-typed nineteen entries against a real keymap of a hundred and
thirteen; it could not show the rest and went stale whenever a bind
changed. Every bind now carries its own description -- backfilled for
the twenty-nine that lacked one -- and keybinds-contract.sh fails if any
bind lacks one, since undescribed binds are dropped from the page.
Make Restore defaults span every store Panama owns. Resetting only the
schema store left the Home accessory arrangement customised while
claiming to restore defaults, which is worse than no reset because it is
silent. Done through HomePreferences' existing public aliases rather
than a new API.
Four defects found while building:
cursor:inactive_timeout is answered by getoption as float, not int. A
wrong readAs does not fail loudly; it makes every write to that key look
rejected, and the user saw an error for a change that worked.
schema-hypr-shape-contract.sh now checks all 23 mapped options against
the running compositor.
The Settings window is tiled, so implicitWidth is only a hint and rows
must survive roughly 400px. SliderRow stacks its control under the label
below 520px.
Binding an anchor to undefined to switch layouts does not reliably
release it. Both row layouts are positioned explicitly.
Concurrent compositor writes are queued and merged rather than refused.
The startup replay of every compositor-backed preference routinely
overlaps a UI change, and refusing left the store and the compositor
disagreeing.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Gabriel Brown