c0eee076b48c9f8d038f55a066d030bd67a1c171
109
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Gabriel Brown
|
9530e32326 |
Give a laptop its first week: the keys, the lid, the battery's endgame
The audit's fourth tier -- what a Framework owner reaches for in the first week and found missing. The power button stops being an instant, unconfirmed poweroff: a shipped logind drop-in tells the daemon to stand down and the compositor binds the key to the power menu, the way GNOME turns it into a question. Holding it still hard-cuts through firmware. change-settings restarts logind so the change applies without waiting for a boot, and the Power page says what the button does now. The function row fills in: F10 (XF86RFKill) toggles airplane mode through a new panama-osd verb that blocks or unblocks every radio and says which way it went; F9 (XF86Display) opens the Displays page, the honest action until mirroring exists. And the lid becomes a switch bind: closing a docked lid turns the internal panel off so nothing renders inside a closed shell and no workspace strands on an invisible output, and opening it restores the panel with the mode and scale chosen in Settings. panama-lid owns both decisions; undocked machines suspend via logind before any of it matters. The battery gets an endgame. On battery the screen dims to 30% two-thirds of the way to blanking -- GNOME's single largest idle battery saver -- and restores exactly the level it saved. At the urgent threshold the machine suspends after a fifteen-second grace, cancelled by plugging in, because a suspend preserves the session for days and a hard cut at 0% preserves nothing; "Only warn" remains a choice on the Power page. Hibernate joins the power menu, but only where logind answers CanHibernate with yes -- an entry that fails silently is worse than none. And brightness stops being two code paths: the Displays page now embeds the same control the quick-settings panel uses, so the built-in backlight and DDC/CI monitors share one surface that withdraws itself where neither exists. The lid contract narrows to what its principle protects -- a HandleLidSwitch drop-in -- so deliberate policy for other keys can ship. Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh |
||
|
Gabriel Brown
|
153554b5df |
Make ./install something you could hand a stranger
The audit's third tier: everything between this installer and a fresh machine it has never met. The one path that could cost a person their display: the interview probes Secure Boot with mokutil, which install-packages had not installed yet, so on a minimal base the MOK question silently never fired -- and install-hardware still installed akmod-nvidia and blacklisted nouveau, arming a reboot into an unloadable driver with its fallback disabled. The probe tools (pciutils, mokutil, fwupd) now bootstrap beside gum, and install-hardware re-checks Secure Boot for itself and refuses the driver rather than the display. Secrets leave the checkout: the personal environment moves to ~/.config/panama/env at mode 600 by migration, and .bashrc sources it with a permission check that quietly re-tightens drift. change-settings no longer overwrites /etc/dnf/dnf.conf -- two performance keys are set additively, the defaultyes=True that made every `dnf remove` treat Enter as yes is gone, and a migration strips it from machines that already received it. Package installation survives the world changing: the initial and desktop lists run with --skip-unavailable and a report_missing pass that names what was skipped (resolved through --whatprovides, so capability names like awk do not cry wolf); the openh264, appstream and core-group extras go through soft; RustDesk resolves its RPM for the machine's own architecture; and the Claude Desktop repository script is fetched to a kept file and run, never piped from the network into root. The hardware predicates stop guessing: a wireless mouse's scope=Device battery no longer turns a tower into a laptop, USB-PD-only machines read their power state from the battery's own status instead of being permanently "on AC", the lid falls back to logind's LidClosed where ACPI is silent, and charge limits reach every pack of a two-battery machine in one authorization -- with the reported percentage summed across packs. And the parsers stop assuming this machine: snapper is read through --machine-readable csv with named columns instead of a localized box-drawing table, and reports whether snapshots are even possible so ext4 and unconfigured-btrfs stop looking identical; fprintd is parsed under LC_ALL=C; the hypridle drop-in resolves the binary it points at; the recorder's render node became an "auto" token resolved at record time; update-grub writes the config its firmware actually boots; the nvm prompt hook and the SSH tmux takeover are guarded; hipblas and rocm-opencl move to an opt-in gpu-compute category; and the two interactive python tools' libraries are declared. Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh |
||
|
Gabriel Brown
|
3d21e20041 |
Make every control tell the truth
The audit's first tier, in one change: every case found where the interface
asserted something the system did not do.
Twenty-one compositor-owned preferences -- the whole Mouse & Touchpad page,
plus window layout, snapping, dim-inactive and the magnifier -- had the live
half (hyprctl eval) and not the config-time half, so they quietly reverted on
every hyprctl reload. All 70 hypr-backed keys now have a prefs.get() in the
Lua, and hypr-prefs-contract pins both the presence and that the Lua fallback
equals the schema default, which is how the touchpad page misreported natural
scrolling on first boot.
The idle generator fell back from unwritten battery keys to the AC values
while the Power page displayed the schema defaults: a fresh laptop showed
"suspend at 20 minutes" and generated no suspend listener, then discharged to
zero in a bag. Unwritten keys now use the defaults the page shows
(idle-defaults-contract pins generator to schema; idle-config-contract
re-pinned to the new rule with the tradeoff recorded), and change-settings
enables managed idle on any machine with a battery -- without starting
hypridle in whatever session the installer runs under.
The per-app lock-screen notification switches wrote fields nothing read:
hyprlock cannot render notifications. Removed, with the rule model shrunk to
{enabled}, stale stored fields dropped at normalization, and the contract now
forbidding the page from growing lock-screen switches it cannot honor.
The battery warning thresholds were searchable, documented as "Found on
Power & Lock", and rendered nowhere -- and crossing the low threshold changed
only a glyph's color. Both sliders now exist where search was already sending
people, and low battery publishes a real notification at important priority.
Three handoffs opened GNOME panels that are inert in a Hyprland session. The
keyboard handoff is gone (that panel writes gsettings nothing here reads, and
the working controls sat on the same page); Connectivity gains a Wi-Fi row
that opens GNOME's actual Wi-Fi panel -- hidden SSIDs and 802.1X finally have
a road -- beside the network row that legitimately drives NetworkManager; the
universal-access handoff is gone, its few working toggles being controls this
app already owns. And the accessibility page now gives the true reason sticky
keys are missing: each Wayland compositor implements its own and Hyprland
does not yet -- not "an X11 feature with no Wayland equivalent," which sent
people to the wrong conclusion about the platform.
Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh
|
||
|
Gabriel Brown
|
dfc0c49877 |
Let the laptop say what it is doing: battery percentage, the lid, a fingerprint
Three surfaces the first laptop install showed were missing. The bar's battery icon gets an optional exact number beside it -- GNOME's "Show Battery Percentage", off by default for GNOME's reason, one color with the icon so it reads as one indicator. The Power page says what closing the lid does. The policy already existed (LidPolicy holds a suspend inhibitor while an external display is connected) but was surfaced nowhere, so the machine's most physical behavior was undiscoverable -- and the deliberate absence of an override deserves stating rather than leaving someone to hunt for a switch that does not exist. And the Users page grows a Fingerprint card, because fingerprint login is two systems that fail silently when they disagree: fprintd holds the enrolled prints, authselect decides whether PAM ever asks the reader. This machine arrived with a finger enrolled from its GNOME days and with-fingerprint off, which reads as "the reader is broken". The card shows both facts, flips the authselect feature through polkit with a stated reason, and hands enrollment to GNOME's Users panel, which owns the only good capture dialog -- a named exception in the handoff contract. Everything through scripts/panama-fingerprint, pinned by a stub-driven contract. Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh |
||
|
Gabriel Brown
|
6510fdda0f |
Reach DDC on GPUs that are not "VGA", and stop warning about an empty dock
ddcutil's udev rule grants the seated user the GPU's i2c buses only when the PCI class is 0x030000. An AMD iGPU that is not the primary boot display says 0x038000, so on the Framework every DDC bus stayed root-only. Ship the same grant for the class the hardware actually reports; change-settings installs it. And two conflations in the probe: an undocked laptop reported its normal state as an error, and doctor collapsed every error into "No accessible DDC/CI bus". Nothing external connected is now a clean empty -- doctor's unconfigured path -- and a real failure surfaces the probe's own words, because an unreadable bus and a monitor with DDC/CI off in its menu have different fixes. Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh |
||
|
Gabriel Brown
|
36fdd4e076 |
Give the VPN a toggle, an indicator, and a way back
Turning on a WireGuard profile whose server was unreachable used to cost the whole network stack, and the only way out was nmcli typed into a terminal. Quickshell's Networking module has no VPN surface, so this arrives as the one sanctioned nmcli exception: a helper that lists, raises and lowers profiles, a service that watches NetworkManager for changes made anywhere, a quick settings tile (left-click toggles the most recently used profile, right-click picks among them), and a bar glyph while a tunnel is up. The safety property is in the helper, where it cannot be skipped: activation waits a bounded 25 seconds, and a failure is rolled back down and reported instead of leaving a black-hole default route. The contract pins exactly that, against a stateful stub NetworkManager. Claude-Session: https://claude.ai/code/session_01Epx9ZC1gwm81K3jm9x9CKh |
||
|
Gabriel Brown
|
669a228286 |
Install the desktop before anything allowed to fail, and let Terra be installed twice
Two bugs, one story: ./install on a machine that had been half set up before produced no Hyprland at all, and said so in one line among twenty minutes of scrollback. Terra bootstraps itself with --repofrompath, which defines a throwaway repo id just long enough to install terra-release. Run it again on a machine that already has terra-release and dnf5 refuses the whole transaction -- the throwaway id collides with the real one. That step sits above everything, so set -e ended the stage before a single package was considered. It is skipped now when terra-release is already installed. The rest is the reason one failed repo cost the desktop. Hyprland was installed near the bottom of the stage, below a codec swap, two group updates and a GStreamer glob, any one of which can fail for reasons outside this repository. It now installs directly after the packages it needs and before anything optional, and everything fragile below it runs through a soft helper that logs and continues rather than ending the run. What was stepped over is listed at the end, because tolerating a failure only beats aborting on it if somebody is told. A missing Hyprland is still fatal, and now says so in words. Also removes the leftover disabled solopasha/hyprland COPR, which would mix with lionheartp's the moment anyone enabled it while debugging. Fixes the usage widget reading 1500%: the endpoint reports percentages, not 0..1 fractions. Clamped as well, and the widget answers a click now -- it set interactive:false, which disables the mouse area its own handler needed. |
||
|
Gabriel Brown
|
8b96d907a1 |
Show how much of the subscription is gone, without risking the session
The last of Section F, and the only thing in Panama that reads an authentication token, so most of the design is about that rather than about the number. It never refreshes the token and never writes to the credentials file. That token expires roughly hourly and Claude Code refreshes it on demand; if this refreshed it too, two processes would be rotating one credential, and a rotation invalidates the other holder's copy. The failure mode is being silently signed out of Claude Code by a status widget, which no bar indicator is worth. So it reads the token, uses it while valid, and reports "waiting for Claude Code to refresh" when not -- which covers the case that matters, because while you are using Claude Code the token is fresh, and while you are not there is nothing to watch. The token never reaches argv either: curl takes the Authorization header on stdin through --config, because a header passed as an argument sits in /proc/<pid>/cmdline for the length of the request. Same rule the password and MOK paths already follow. And it never reaches the output: the record carries percentages and timestamps and nothing else. Both are pinned, and both were checked by sabotaging the collector to pass -H and watching the contract name it. Off by default. It is a coding-tool readout, not something a general-purpose desktop shows without being asked, and it hides unless the collector has real numbers rather than displaying "unknown". |
||
|
Gabriel Brown
|
7a5e990439 |
Let somebody extend this without forking it, and say when things die
Two of Section F. Hooks are the pressure valve. "Can Panama also do X when the theme changes" is now a five-line file in ~/.config/panama/hooks rather than a fork, a feature request, or a patch somebody rebases forever. Each name takes a single file and a .d directory so several things can react without fighting over one, and a broken hook is reported and stepped over: somebody's script must never cost a theme change, an upgrade or a login. Wired at theme-set, post-upgrade and post-migrate. This is the thirty-line version of the plugin host the upstream ledger defers, and it has no API to keep stable beyond "we will run your script and tell you what happened". Testing it caught a real bug the reading would not have: run_one captured the script path but never shifted it off, so every hook got its own filename as $1 and the real arguments arrived one place late. A hook reading $1 as the colour scheme got a path. The crash watcher notices when a program dumps core and says so. Under GNOME, ABRT does this; here nothing did, and applications died silently, which is most of how "Linux is flaky" gets earned. Once per program per session is the entire design, not a nicety. This machine's portal backend crashes between eleven and sixty times a day, and a notification per crash would be one every few minutes for something nobody can act on. The first is news; the fortieth is why people turn notifications off. The health page keeps the running count. It waits for the notification server before reporting, because the crash most worth hearing about is the one that took the shell with it, and it names the executable rather than the kernel's comm field, which truncates at fifteen characters. Verified against real segfaults. |
||
|
Gabriel Brown
|
4910bd659c |
Say out loud that the portal backend is crash-looping
xdg-desktop-portal-hyprland 1.4.1 segfaults in its own shutdown path: exit() runs the CPortalManager destructor, which tears down wlr-foreign-toplevel handles and xdg-output proxies after the display has gone, and dies in wl_map_insert_at. systemd restarts it, so the desktop keeps working and the only symptom is screen sharing dropping mid-session and the occasional document-portal casualty. Sixty crashes in one day left no trace anywhere a person would look. It took reading coredumpctl to find, and nobody reads coredumpctl on a desktop that appears to be working -- which is exactly the shape of problem the health page exists for. On this machine the new check reported twenty-eight in the last day the moment it was wired up. Reported rather than repaired, and it says so. There is nothing to restart that systemd has not already restarted, and no newer build in the Hyprland COPR to install: the fix is upstream. A button that did nothing would be worse than a sentence that explains. Below five in a day stays green, because an upstream bug that only bites on shutdown will occasionally bite and a health page that is never green teaches people to ignore it. |
||
|
Gabriel Brown
|
333ab9f6b7 |
Press the browser key twice, get one browser
The application keys ran their command unconditionally, so pressing the browser key twice gave you two browsers. That is the single most common "Linux feels wrong" moment and it is a twenty-line fix: match the window class, focus it if it is there, launch if it is not. Two details the obvious version gets wrong. Patterns are anchored, because an unanchored "mail" matches gmail-notifier and the mail key would raise somebody's notifier. And class alone is not enough here: the terminal and the editor are both kitty, so the editor bind narrows by title or it raises whatever terminal happened to be open. The contract's fixture contains both traps. Found and fixed a bug this shipped with earlier today. Hyprland 0.56 dispatches through Lua, so `hyprctl dispatch focuswindow address:0x...` is parsed as Lua source and fails with a syntax error -- which is what the launcher's Switch Window command had been doing since it landed. Its own contract stubbed hyprctl and recorded the arguments, so the call looked correct and never ran. Both now use the selector form hl.focus actually accepts, and the contract asserts the shape rather than only that something was dispatched. |
||
|
Gabriel Brown
|
e1a04d2d70 |
Write the eight accents down once
They were written down five times: ThemeProfileModel.js for QML, looks.lua for the compositor, and again in panama-theme-apps and panama-lock. The GNOME accent-name mapping was a sixth list. Adding a ninth accent meant editing all of them, and the file most likely to be missed was the lock screen, which fails silently -- the machine locks in last season's colour and nothing says why. panama-theme-apps admitted it in a comment: "there is no shared source between QML and a shell script". config/palette.json is that source now. looks.lua reads it through a new prefs.readJson, which uses the same never-raise parser the settings store uses, so an unreadable palette costs the accent colours and never the compositor config. The two shell generators read it through scripts/panama-palette, which also carries the hex-to-rgb conversion hyprlock needs and the GNOME member lookup. QML keeps its table, because a .js module imported into QML cannot read a file. That is still a copy, so the palette contract compares the two value by value -- every accent, every field -- and fails on any disagreement. Verified by planting a wrong hex and watching it name the exact field. The adwaita contract used to check the shell's own copy of the GNOME mapping. It now checks that the shell resolves through the palette, and fails if that copy ever grows back. |
||
|
Gabriel Brown
|
50a99a5ad0 |
Closing the lid at a desk is not closing it in a bag
logind handles the lid correctly except for the one case it cannot see: an external display means a closed lid is a docked machine, not one being put away. Its own docked test looks for an ACPI docking station that modern hardware does not have. Panama does not take the lid over to fix that. It holds a logind handle-lid-switch inhibitor while an external display is connected and releases it when the last one goes, which needs no lid watcher, no polling, and no drop-in. The direction it fails in is the point: if the guard dies, logind's default comes back and a docked laptop suspends, which is annoying. A drop-in setting HandleLidSwitch=ignore plus a watcher of our own fails the other way, leaving a lid that does nothing at all on a machine being carried out of a building. Locking on the way down needed no work: hypridle's before_sleep_cmd already runs loginctl lock-session, so a lid-close suspend is a locked suspend. The contract fails anything that duplicates it. Not yet verified against a real lid, which is stated in the helper's header rather than implied by silence. The decision logic, the inhibitor's shape, and every machine that should hold none of it are covered. |
||
|
Gabriel Brown
|
bc6d63b70f |
Let the idle timings know whether you are plugged in
An idle screen costs a screen on wall power and the rest of your afternoon on battery, so they should not be the same number. hypridle has no concept of a power source -- one config, one set of timeouts -- so rather than maintaining two configs and swapping them, panama-idle builds the single config from whichever key set applies, and IdleLock rebuilds it when the charger comes or goes. That runs through the same 400ms debounce a settings change uses, so a loose charger cannot restart hypridle in a loop. The battery keys fall back to their AC counterparts rather than to the schema defaults. Without that, unplugging would silently override a deliberately long timing with a shipped short one, which is the kind of thing you would notice only by losing work. A machine with no battery reads none of it and generates exactly what it generated before. The contract pins that alongside the two obvious directions, and was checked by sabotaging the detection to confirm it fails rather than passing vacuously. |
||
|
Gabriel Brown
|
3c359f3f7e |
Notice the battery, and the machine it is or is not in
Panama had no idea whether it was running on a laptop. No upower, no battery, no lid, no AC: hypridle.conf says "This is a desktop" in its own header, and that was true of the code as well as the machine. panama-hw answers hardware questions one at a time, exits 0 or 1, and prints nothing, so scripts, services and contracts all ask the same way. The definition the rest of the laptop work hangs on is one line: clamshell is lid-closed AND an external monitor. A machine with no mains supply at all reports as being on wall power, because a desktop cannot run out of it. The battery service follows Vitals: sysfs through FileView, an availability flag, and no subprocess on the timer. Globbing is the one thing QML cannot do -- a battery is BAT0 or BAT1 or CMB0, mains is AC or ADP1 or ACAD -- so panama-battery resolves the names once and the shell reads the files directly after. Nothing falls back to a plausible zero: a desktop shows no indicator, no card, and no charge limit control where the firmware has no ceiling. Also repairs two contracts that were already failing and had not been noticed, because only the full suite runs them. The dependency scanner treated line-initial variable assignments, case labels, comments and heredoc bodies as commands, and `count`, `host`, `cancel` and `import` are all real binaries on Fedora, so `command -v` could not filter them out. It now drops comments and heredoc bodies and requires a command to be followed by whitespace. Verified it still catches a genuinely undeclared dependency rather than passing quietly. The launcher command contract had not been told about the fourteen commands added earlier today. |
||
|
Gabriel Brown
|
c02329ac3c |
Copy a password without leaving a trace of it
The launcher's Copy Password command, built alone and last as the plan required, because every line of it is the security design: the secret travels rbw to wl-copy through a pipe -- never argv, never a file -- and the copy carries wl-clipboard's --sensitive hint, which vicinae's clipboard history documents it ignores. That claim was not taken on faith: a plain probe landed in the live history database and a sensitive one did not, before any of this was written. A transient timer clears the clipboard after thirty seconds. An unconfigured rbw gets a setup message; a vault that locks between list and get gets an honest failure instead of an empty copy claiming success. rbw joins desktop-packages, and the contract pins the whole journey with a stub vault, including that the secret never appears on a command line. |
||
|
Gabriel Brown
|
4e978bf3b7 |
Teach the launcher what an operating system knows
The OS-parity batch from the vicinae plan, tasks 1 through 7. The audit came back better than the plan guessed: the calculator already links libqalculate, the built-in file index answers in under 100ms across all of home, quicklinks and snippets ship as built-in stores -- so zero new packages, and `vicinae dmenu` replaces the planned compiled extension outright. What was missing gets built: a power menu (lock, suspend, log out through uwsm, restart, power off), reminders as transient systemd timers with a pick-to-cancel list, a color picker over hyprpicker, and dmenu pick-lists for window switching, force quit, kill process, SSH hosts, and recent files -- all through one panama-pick helper. The launcher commands contract exercises the reminder parsing and every pick-list against stubs, including killing its own sacrificial sleep. |
||
|
Gabriel Brown
|
86825e7327 |
Judge the document portal by its mount, not by its service
No flatpak would launch. Every one of them failed in bwrap with "Can't find
source path /run/user/1000/doc/by-app/<id>", because xdg-document-portal's fuse
mount was gone -- /run/user/1000/doc was a plain empty directory. That mount is
bound into every sandbox bwrap builds, so losing it takes out all 34 flatpaks at
once, never a subset.
It had been gone for three days. The shipped unit is Type=dbus with Restart=no,
so nothing retries it on failure: after it exited 21 it came back only because a
flatpak called its bus name two seconds later, and that activation landed on the
dying instance's mountpoint and came up with no mount at all. systemctl reports
active (running) either way -- the fusermount3 helper is still sitting there as a
child, in this case for two and a half days without ever completing the mount.
Nothing running notices, which is what makes it so quiet. A sandbox needs the
mount only while it is being constructed, so everything already open keeps
working and the symptom arrives whenever you next open a flatpak you had not
opened yet. Here that was three days later, and it presented as "gearlever is
missing" -- an application that was installed, healthy, and entirely innocent.
Two changes, because there are two failures: it does not recover, and nothing
says so.
The drop-in clears the mountpoint before each start, so an activation that
follows a crash lands on clean ground. ExecStartPre rather than ExecStopPost
precisely because nothing restarts this unit -- the next start is whenever
something next wants it, and that is the moment that has to be safe. `-` because
a clean start has nothing to unmount and fusermount3 exits 1 saying so.
/etc/systemd/user rather than a per-user drop-in so it covers every account, and
change-settings reloads the user manager so it applies without a re-login.
The check asks the mount table whether $XDG_RUNTIME_DIR/doc is mounted
fuse.portal. Deliberately not a service probe, and deliberately not folded into
desktop.portals: that one asks about xdg-desktop-portal, a different service
which was up and healthy throughout. Service state is exactly the question that
lied here, so asking it again in a new place would have been no check at all.
Warning carries a restart repair, verified end to end rather than assumed.
The mount table is injectable, like every other path this script reads, so the
contract covers unmounted, wrong-filesystem-at-the-right-path, and unreadable
against written fixtures rather than against whatever /proc happens to say --
coupling the test to this machine's live flatpak state is the same mistake in
miniature. Stubbing the check to always return ok fails the contract, which was
confirmed rather than hoped.
What is not fixed is the crash itself: one occurrence, and restarting the
service to get the desktop working destroyed the evidence. The exit was 21, it
landed 21 seconds after xdg-desktop-portal restarted, and that is one sample and
not a theory. What this buys is that the next one is a two-second blip the
doctor names, rather than three silent days.
Second time for this bug.
|
||
|
Gabriel Brown
|
185d7edaa5 |
Open the windows you open together, together
Arrange the desktop, run "Save Layout as Project" from the launcher, name it. "Open Project" lays it out again on free workspaces, so it never lands on top of what you are already doing. Saved layouts are listed on the Desktop settings page, which is where they are removed. Recorded rather than written by hand, and a terminal's directory is most of why it is worth having: without it a project opens three terminals in your home folder and you change directory three times. This machine had two terminals in the same project when it was written, and reopening there is the difference between a layout and a working desktop. Four things had to be found by running it, none of which reading would have shown. A terminal's directory is not the terminal's working directory -- that is where it was launched from. The shell inside it is what has been cd'd. Reading the wrong one looked correct for exactly as long as the terminals under test had been started from the right place, which they had. gtk-launch cannot place a window. It activates over D-Bus, so the process Hyprland started exits and a [workspace N silent] rule has nothing left to apply to; Nautilus landed on whatever workspace was in front of you. The Exec line from the desktop entry is run directly instead. But DBusActivatable applications do the same thing regardless, so the window is found afterwards and moved by address -- which also means a window that never appeared is reported rather than assumed. /proc/PID/task/PID/children is a file of pids, not a directory. Listing it as one always raised, so the fast path was never once taken and everything went through pgrep. And kitty's --directory needs an equals sign or the short -d; the space-separated long form is accepted and silently ignored. The contract exercises a save and open round trip against a stubbed compositor, and reads a terminal's directory out of a real process tree rather than grepping the source for a shell name -- an earlier version passed against a helper that had been changed back, because the constant was still there. Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1 |
||
|
Gabriel Brown
|
538c0a887c |
Save things where the rest of the software already saves them
Screenshots and recordings offered three folders to choose between, and three
guesses cannot include the folder somebody's other software already writes to --
which is the only folder that matters. This machine has had ~/Pictures/Screenshots
and ~/Videos/Screencasts since long before Panama, and Panama was writing
recordings to a Videos/Recordings it invented. Both are free text now, and the
recording default is the folder that was already there.
Wallpapers were swept from four directories at once, so the distribution's stock
images arrived mixed in with the user's own and there was no way to ask for just
one. Where wallpapers live is something somebody knows about their own machine.
It is a setting, not a search.
All three accept an absolute path as well as one relative to home, which meant
fixing Capture: it prefixed $HOME unconditionally, so naming /mnt/captures would
have written screenshots to ~/mnt/captures and left nobody able to find them.
The generator turned out to skip any entry whose comment sits inside the braces
rather than above them -- it looks for `key:` immediately after `{`. Three
settings were invisible in the reference because of it, one of them dockScreens,
which has never appeared there at all. The staleness contract could not see it
either: regenerating reproduced the same omission, so the copy was current and
incomplete at once. It now counts what was declared against what it could read
and refuses rather than quietly documenting less than exists.
Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
|
||
|
Gabriel Brown
|
7cd4131327 |
Hold a key, speak, and the words are typed
Super+D holds the microphone open, releasing it transcribes on the GPU and types the result wherever the cursor is. Roughly 150ms for a normal utterance once the model is resident, measured rather than hoped for. Getting there meant discarding two approaches. Fedora 44 cannot install any GPU-capable Whisper for Python -- openai-whisper needs a numba that needs an llvmlite that does not exist for 3.14, and faster-whisper needs a ctranslate2 nobody packaged. The whisper-cpp package IS built with HIP but ships libraries with no binary and no bindings, and hand-writing ctypes for a large by-value struct is a segfault waiting for a version bump. So a container, as suggested. Vulkan rather than ROCm, and upstream's image rather than one built here. ROCm is seven gigabytes and serves AMD alone; Vulkan compute runs on the AMD, Intel and NVIDIA machines this config is used on, in a twentieth of the space. The Vulkan tag already contains whisper-server, so there is no Containerfile to keep working -- an earlier draft of this commit had one, and it was strictly worse. Two bugs found by using it rather than by reading it. Whisper describes silence as the literal text "[BLANK_AUDIO]", and the first working version pasted that string into the clipboard; a transcription that is nothing but such markers is now discarded. And the server answers with a line per segment, which typed into a window is an Enter press -- sending the half-written message, submitting the form. Whitespace is collapsed to one line. Neither the image nor the model is installed by ./install. Together they are over two gigabytes that want the network, and Settings offers both as one action instead. Nothing starts at login either: whisper-server holds the model from the moment it starts, so the first press of the key is what brings it up. The contract pins both text bugs, that the server stays on loopback, and that it does not start at login. Reverting the [BLANK_AUDIO] guard did not fail it at first -- the check was still correct, it had simply stopped being called -- so it now checks the call site too. Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1 |
||
|
Gabriel Brown
|
48f7c1e962 |
Name the Gaming page, and stop the docs inventing names
The settings reference is generated, and a contract already fails when the committed copy is stale -- so it was current. It was also wrong: the Gaming page was documented as "Found on **gaming**" while every other group named a real page, because a routed page with no entry in PAGE_TITLES fell back to printing its own id. The staleness contract could not see it. Regenerating reproduced the same wrong file, so the copy was current and wrong at the same time -- a check that compares output against itself cannot catch a generator that is confidently mistaken. So the fallback is gone. A routed page with no title now refuses to render and says which page needs one, which is what makes the next page added here impossible to miss. Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1 |
||
|
Gabriel Brown
|
a90f6eb357 | Fix wallpaper scan cap exit status | ||
|
Gabriel Brown
|
c4642919f7 | Close desktop safety gaps | ||
|
Gabriel Brown
|
e1faaf7a76 |
Drop the extension, and give the test suite a front door
Phase 6, the last of the fresh-install spec. 159 scripts lose their .sh: 110 contracts, 47 Vicinae commands, 2 compositor contracts. A shebang and the executable bit already select the interpreter. The extension only ever added something that had to stay in sync, and the rename proved the point twice over in the space of an hour. The spec's stated risk was Vicinae's script discovery. One script was renamed and reloaded on its own before the other 46 followed; it came back as scripts:panama.capture and all 47 resolve. What the probe turned up instead is that the extension was never only a filename: Vicinae's command IDs embed it, so every ID changed. Nothing in this repository refers to them, so nothing breaks. The only trace is Vicinae's metadata.json, whose visited map had two Panama entries that are now orphaned -- two commands lost their usage ranking and will earn it back. Worth knowing before anyone renames these again on a machine that has a keybind pointing at one. Rewriting the references by exact filename missed two things it structurally could not see: a name built from a variable, settings-$page.sh, and a glob, -name '*.sh'. Both were in the contract that counts the generated commands, which promptly reported 47 expected and 0 found. The mechanical part of a rename is the part that looks finished. The three subcommands. panama doctor fronts a health check that already existed and already ran at the end of every install but could not be reached from a terminal. panama upgrade re-runs the installer from anywhere. panama test runs the suite, which had no entry point at all -- 121 files that were the main safety net in this repository and were invisible in it. Writing that runner found three tests nothing was running. calendar_agenda_bridge_test, home_assistant_bridge_test and kdeconnect_bridge_test are unittest suites without the executable bit, so no contract invoked them and the first draft of the runner skipped them silently. All three pass, and have passed unobserved for weeks. The runner collects *_test.py as well now, because a runner with a blind spot is worse than no runner for the same reason a dependency checker with one is: it reports PASS. Six worktrees pruned. Each was re-checked rather than trusted to the spec's list, and two needed it: panama-commands is not on feat/panama-commands but on feat/gnome-tweaks-parity, and fix/panama-displays-review reads [ahead 3] -- ahead of its remote, not of main, with every commit patch-equivalent to landed work. roadmap-completion stays; it has five commits that are genuinely unlanded. The branches are left alone: pruning a worktree costs nothing, deleting a branch is a decision. 121 contracts pass. Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj |
||
|
Gabriel Brown
|
495fb9b41b |
Give each online account its provider's icon
Four accounts distinguished only by a line of small grey text are four rows that have to be read rather than recognised. GOA already knows what each one is. It hands back a serialised GThemedIcon -- ". GThemedIcon goa-account-google goa-account goa …" -- a preference-ordered fallback chain. The helper passes the whole chain on rather than resolving it, because which of those names exists is a property of the icon theme in use and not something a python script talking to D-Bus should be deciding. The page walks the chain and takes the first name the active theme actually has. Both simpler readings were wrong and looked right: taking the first name blindly assumes it resolves, and taking the last as a fallback assumes the most generic name is the most likely to exist. On Adwaita the tails of these very chains -- "mail", "goa-symbolic" -- do not exist at all, so a miss would have drawn nothing. Checked by asking Quickshell.iconPath directly, which returns empty for a name the theme lacks; the fallback is avatar-default-symbolic, which is present. SettingsCard grew an optional icon for this. It is empty by default and the header lays out exactly as before when unset, so no other card moves. Last-sync is not here because there is nothing to show: GOA exposes no sync-related property at all, on any of these accounts. Better to say so than to invent a timestamp from when the page last refreshed. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
4cbab01ae2 |
Show what has actually been installed
Automatic updates leave no other trace. The Flatpak that sat here as "1 update available" installed itself at 00:14 this morning and nothing on the machine would have said so. Both sources are asked in their own machine-readable form and merged on time, so the answer reads as one history rather than two lists to interleave by eye. Two parsing traps worth recording next to the code. flatpak's --json prints timestamps as "Aug 20 08:07:46" with no year in them, so the year is inferred and a date that would land in the future is read as last year's. And dnf5's start_time is epoch UTC while its own history table prints that same value as though it were local -- checked against rpm, and the local rendering here is the correct one. The contract asserts entries are newest first, that none is dated in the future, and that both sources parse; it was verified to fail by breaking the year inference so every flatpak entry landed tomorrow. Loaded on demand rather than with the page, because it reads both full transaction logs. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
de45f205ad |
Carry settings between machines by allow-list, not by stripping
panama-settings-backup already snapshots this machine so it can be put back exactly as it was, arrangement and all. This is the other thing: an export meant to travel, carrying the preferences that describe taste rather than hardware. The export is an allow-list read from the preference schema rather than a deny-list of things to remove. A key added later that happens to hold a token cannot leak into a file somebody emails to themselves; being wrong in this direction loses a setting, being wrong the other way publishes a secret. It earned that immediately -- this machine's store holds an orphaned shadowOffset from a setting that no longer exists anywhere in the source, and it was left behind without anyone having to know about it. Three settings stay: the display arrangement, which is keyed by output names that mean nothing elsewhere; the last page opened, which is session noise; and schemaVersion, which belongs to the store rather than to a person. Import is a merge, so settings a file does not mention are left alone, and it is idempotent. Two bugs made and caught here, in opposite directions. Validation missed 36 settings because "real" was spelled "float" and enums fell through entirely, so an out-of-range or nonsense value would have been written straight into the store. Correcting that then broke numeric enums -- vrrPolicy is an enum of 0..3 and the options were read with a regex that only matched quoted values, so those settings had no known choices, were declared unverifiable and were refused: valid settings dropped silently in transit. The contract could not see the second one. It checked only that bad values are refused, and when numeric enums were unreadable they never reached the bundle at all, so every "did it arrive" assertion was satisfied by their absence. It now requires the export to carry what it should as well as withhold what it should not, and was verified to fail in both directions. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
52e2a83a78 |
Add an SSH Keys page, and refuse the one control that would lie
The page shows which keys exist, what the agent is holding, and the hosts this machine has met, with a two-press forget for a host whose key has changed. Nothing here reads private key material. Fingerprints and comments come from the .pub file, and "does this key need a passphrase" is answered by asking ssh-keygen to derive the public half with an empty one -- it succeeds for an unencrypted key and fails for an encrypted one, and either way the only thing it can emit is public. The contract checks that against the payload that actually reaches the page rather than against the source, because what the code intends and what it ships are different claims. Unloading a key from the agent is refused, with its reason. On this desktop `ssh-add -d` prints "Identity removed" and the key is still offered a second later: gnome-keyring's agent lists every key it finds in ~/.ssh, so a removed one comes straight back off disk. That was measured rather than assumed -- a plain ssh-agent removes durably, this one does not -- and a button reporting success while changing nothing is worse than no button. The page says so and names the thing that does work: move the file out of ~/.ssh. SSH_AUTH_SOCK is not set in a normal shell here, so a naive check reports "no agent" while one is plainly running. The helper falls back to the keyring socket, and an agent started by hand still wins. That gap is the same one that made reaching these servers awkward in the first place. Generating a key is deliberately absent. A passphrase cannot reach ssh-keygen without going somewhere it should not -- -N puts it in argv, which every process on the machine can read -- and driving the prompt over a pty did not work. Offering to generate an unencrypted key instead would be a downgrade dressed as a feature, so the page does not offer to generate at all. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
6dc606b872 |
Give focus modes conditions rather than alarms, and let Gaming hand over
A mode is on because something is true right now: a game is running, a window is fullscreen on a given display, a workspace is focused, the clock is inside a window. That is asked again rather than fired once, and it is the whole reason schedules could be included here without the usual failure modes. A machine asleep at 23:30, rebooted at 02:00, or opened at 08:00 into a window that has already passed all reach the right answer by being asked again; an alarm gets all three wrong. The midnight-crossing rule is the part worth being careful about: a window belongs to the day it STARTS on, so a Friday-only 23:30-07:00 covers Saturday morning and must not cover Saturday night. That arithmetic was tested as pure logic before anything was built on it, including every malformed input failing closed -- silencing someone because a time string was wrong is the worst way this could fail. This does not take over the manual timed session. FocusSession already owns that, with its capsule, shortcut, Quick Settings entry and contracts, so modes defer entirely while one runs. Two writers of Do Not Disturb would each restore whatever the other happened to leave behind. Gaming hands over rather than being duplicated. The hook was silencing notifications itself, which would have made exactly those two owners -- and Gaming.active only polls while its settings page is open, so a mode could not have seen a game reliably in any case. The hook reports the game over IPC now and the mode decides what that means, the Gaming page points at it, and gamingSilenceNotifications is retired from the schema, since a setting nothing reads is the dead row this work keeps removing. Sleep ships disabled. A desktop that starts silencing someone on first boot has overstepped, whatever the default hour. Three contracts moved with it. gaming-contract asserted the hook uses setDnd, which was right before and wrong now; the shell-side assertions that setDnd and dndState exist stay, because a toggle would flip an already-silent machine back on. The new contract is proven to fail by breaking the midnight rule and by letting modes run alongside a manual session. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
f6b970da21 |
Turn the rows that only reported things into controls
Autostart entries showed "Enabled" or "Disabled" as plain text. The row did toggle on click the whole time, so this is an affordance rather than a missing capability -- but a control that reads as static text is one nobody knows they have. It is a switch now, with removal alongside it behind a confirmation: disabling writes Hidden=true and can be undone, deleting the file cannot. remove-autostart is confined to files the autostart directory owns. It resolves the path and compares the parent, so a name like "../../.bashrc" cannot escape, and it refuses symlinks rather than following them -- deleting through one would remove whatever it points at, which is somewhere else and not ours. Each refusal was tested against a fixture directory, including a symlink aimed at /etc/hostname, which survived. Sharing says who is signed in from another machine: user, origin and since when. An empty list on this machine proves nothing, so the parser was checked against sample `who` output -- it picks out remote sessions and leaves out local seats and the :0 display, which would otherwise report the person at the keyboard as a remote login. Media sharing was "Available" and nothing else: rygel installed, rygel.service disabled, no way to change that from here. It is a switch now, and it says what it does before you touch it rather than afterwards -- turning it on publishes media folders to every device on the network with no password in front of them. Per-application camera and microphone permissions come from the portal's permission store, which is where an application that asked through the portal has its answer recorded. The page states the limit plainly instead of implying a protection that does not exist: a program installed outside the portal opens the device directly and nothing here stands in its way. Anything that is not an explicit "yes" is treated as withheld, because guessing generously about a camera is the wrong way to be wrong. The first version of the write silently did nothing -- SetPermission takes an array of strings and was being handed one string -- and the test did not notice, because it discarded the helper's output and only checked that state was unchanged afterwards, which was trivially true. The contract now requires the value to move, and was proven to fail by putting that exact bug back. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
0c364f38e6 |
Stop sending people to GNOME for pages this app already has
Panama absorbed Users, Sharing, Printers and Online Accounts one page at a time. Each time, the row pointing at GNOME's equivalent stayed exactly where it was -- so an app whose stated purpose is to make GNOME Settings unnecessary shipped four doors back to it, two of them inside a card headed "these areas remain owned by Fedora and GNOME's mature system panels". Nothing failed. Every row worked as written. They were simply no longer true, and no test could notice, because none of them knew what Panama had come to own in the meantime. gnome-handoff-contract reads the sidebar for the pages that exist and the pages for the panels they hand off, and fails on any overlap -- derived from both sides rather than a hand-kept list, so absorbing the next page cannot leave a stale door behind. Adding an online account is allow-listed with its reason: it genuinely requires GOA's own dialog. health-ui-contract asserted those handoffs were present, which is how they survived. The assertion is inverted rather than deleted, so reintroducing one fails loudly. The Home Assistant "Light entities" box is gone. It was a multi-line list of comma-separated Zigbee entity IDs, and the light catalog does not come from it -- the helper discovers that live. It is a one-time migration seed for the Control Center selection, so saving now passes the stored value back untouched: setting a URL or a token cannot disturb it. Deleting the control naively would have written an empty list over it. Sharing showed two "Port" rows for RDP, same label and value, one read-only and one editable, separated by a switch. The read-only leftover is gone. The SSH port stays read-only because sshd's port is not ours to write. About reported "488G free of 1.9T" where Storage said "523 GB free of 2.0 TB" -- the same drive, binary against decimal. About uses decimal now, matching how drives are sold. Memory and swap stay in GiB, which is how RAM is sold. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
1aa1324083 |
Lead Appearance with light and dark, and stop pages listing whole datasets
Appearance was six cards deep and Light/Dark was the third of them, below the wallpaper grid and the entire lock screen -- so the control reached most often was the last one you got to. It is five tabs now, Theme first. The mock showed four; the page turned out to have eleven cards, so Titlebars and Windows became Windows, and Clock and vitals became Shell, rather than pretending four would hold them. Region, Date & Time and Displays each rendered a complete dataset as rows: every installed locale, the whole tz database, every mode the monitor advertises. The chooser was never the problem -- SearchPicker already existed and worked. It was simply rendered always-expanded, so the one line saying what is currently set sat under hundreds that were not. PickerRow collapses each behind its current value and closes again once something is picked. The avatar never appeared to change because accountsservice writes every picture to the same path, leaving the URL byte-identical while Qt served its cached image. cache:false was already set and could not have helped: an unchanged source is never re-read at all. avatarUrl now carries a revision fragment, bumped only when a write actually succeeds. Pictures are cropped before they are set, in the picture's own pixel coordinates so the result does not depend on the size it happened to be displayed at, and written out at 512x512 through GdkPixbuf -- already a dependency here, so nothing new is required. Snapshots listed nothing. The timeline and its Delete buttons existed the whole time, behind a row labelled "Browse...", a word that promises a file browser. The three most recent points are shown inline now, with the rest one press away. qmldir-registration-contract exists because an unregistered component is not a quiet problem: Quickshell fails the entire configuration on it, so the settings window dies and the bar and dock go with it. That happened twice while writing this, both times on a machine somebody was using. It is pure file inspection, so it runs before a change ever reaches the running shell. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
ac5e6e2130 |
Add a Containers page, grouped by project and led by what is exposed
Every container on this machine is created by rootless podman-compose and
labelled with the project it belongs to, so the grouping is read from the
labels rather than invented. State then decides prominence within that
grouping -- running containers get rows, stopped ones collapse to a line --
which is why neither axis had to be chosen over the other.
Acting on a stack uses plain podman over the labelled set, never
`podman-compose down`, which would remove containers this shell did not
create. The compose file is the source of truth for what exists and belongs
to the repository. Nothing here needs privilege.
The findings on top are the crossing the Firewall page reports, seen from the
side that can close it: the firewall knows only that something is listening,
while this page knows which container, which compose file, and which token is
missing from it. So `bind-local` prepends a loopback address and leaves the
line byte-for-byte -- variables, quoting and style intact -- then re-parses and
rolls back unless exactly those ports moved. It refuses anything ambiguous
rather than guessing. Rewriting the mapping to the port podman reports today
would have deleted the ${POSTGRES_PORT} indirection that makes it
configurable at all.
Unused volumes are read from podman's own dangling filter. The first version
used MountCount, which is a runtime lock counter and not a usage signal: it
reads zero for a volume a running container has mounted this second, so
"remove unused volumes" offered to delete the live Command Center database.
The cross-check against `podman system df` is what exposed it. The contract
reintroduces that bug deliberately and fails if the guard does not catch it,
because a guard nobody has seen fail proves nothing.
Every mutation in the contract runs against a stubbed podman. Nothing in the
suite starts, stops or removes a real container, image or volume.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
|
||
|
Gabriel Brown
|
fd99569666 |
Add a Firewall page, led by what is actually reachable
Listing zones and services is what firewall-cmd already does. The question it does not answer needs both halves at once: a port is reachable only when something is LISTENING on a network address AND the firewall permits it. On this machine that crossing is the whole story. The rules look unremarkable -- one zone, three services, a port range -- and what they mean is that PostgreSQL and Redis, published by rootless containers on every interface, are reachable by anyone on the network. Neither half says that alone, which is exactly how a tidy rules list coexists with an open database. Nothing was misconfigured: Fedora's default zone met podman's default publish behaviour. Ephemeral client sockets are excluded. A browser's outbound UDP port is indistinguishable from a service in ss, and listing twenty of them buried the two rows that mattered. Closing the port range names what it would cut off, by service, before doing it, and removing ssh says so when someone is connected over it. Rich rules are shown and never edited: a syntax is not a setting, but hiding it would misrepresent the configuration. The contract needed a recorded firewall, and the reason is worth keeping. The rule this page exists for cannot be tested against this machine -- its zone permits everything above 1024, so "listening" and "listening and permitted" give identical answers, and a blocked listener needs a port below 1024, which needs root. With the crossing deleted, the contract passed. It now runs against a fixture where two listeners are blocked, and catches it. Also here: polkit response files are written 0600 rather than at the default mask, the agent sweeps requests left by an instance that did not exit cleanly, and the write sweep waits for its harness to be ready instead of reporting the startup race as settings that failed. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
4cbe3b882a |
Add a Gaming page, and let the desktop react to games
Live first, because unlike every other page here this one has a live dimension: card temperature, power draw, whether Game Mode actually engaged. It polls only while it is open, since a settings page nobody is looking at has no business waking the CPU. The part that makes it Panama's page rather than a gamemode config editor is the hook. gamemode runs a script when a game asks for it and another when the game exits, so the power profile switches to performance and notifications go quiet for exactly the duration of a game -- and afterwards both go back to what they WERE, not to a default. A Do Not Disturb someone set by hand survives a game; a power profile someone chose is restored rather than replaced. Verified against real gamemode activation, not merely by calling the hook. Two things the page reports rather than hides. Game Mode's headline trick is switching the CPU governor to performance, and this machine already runs performance, so it says so instead of implying it helps. And Proton builds are listed but never chosen: Steam picks the runtime per game, and a control here would claim an authority this page does not have. The hook first called a notifications function that did not exist, and the one that did was a TOGGLE -- the wrong primitive entirely, since toggling at game start would unsilence notifications that were already silent. The shell gained an explicit setter and reader. search-routing-contract kept its own hand-written list of every page, which made adding one fail as "not a known page" -- a sixth place to register a page and a sixth chance to forget. It now derives the mapping from the shell, which already knows it. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
a15f019c17 |
Offer automatic package downloads, now that the machinery is installed
The page had a row for the case where dnf-automatic is absent and nothing for the case where it is present, so installing it made the setting disappear rather than appear. The switch enables downloading only, which is the shipped default and the right one to keep: a machine that installs packages unattended can reboot into a kernel nobody chose. Downloading ahead of time is what makes the install quick when someone does choose it, and the row says exactly that rather than implying updates apply themselves. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
116510caa8 |
Draw the authentication prompt ourselves
hyprpolkitagent's dialog is compiled into its binary -- no config, no stylesheet, nothing to theme -- and it was the one window on this desktop that looked like it belonged to something else. The split between the two halves is the security design, not an implementation detail. A small agent process owns the D-Bus side: it registers with polkitd, receives the request, and hands the shell the action, the message, who may answer, and a one-time cookie. It never sees a password. The shell draws the prompt and, on submit, spawns the setuid polkit-agent-helper-1 itself and writes the password to that helper's stdin; the helper runs the PAM conversation and reports to polkitd directly. The password exists in the shell and in the helper's stdin and nowhere else -- never on a command line, never over D-Bus, never through IPC arguments. The prompt takes exclusive keyboard focus, because a password field that lets keystrokes reach the window behind it is a keylogger with extra steps. The request travels as a file created 0600 with O_EXCL inside a 0700 runtime directory: a cookie is not a password, but it is a capability, and capabilities do not belong in a process listing either. Three things cost real time. polkitd calls back on the same connection that registered, so exporting the object on the session bus while registering from the system bus failed every request as "Not authorized" with no error anywhere. XDG_SESSION_ID is absent in a systemd user unit, which runs under [email protected] and belongs to no login session, so the session comes from logind's Display property instead. And PyGObject does not accept the @ placeholder in variant format strings. hyprpolkitagent stays installed as the fallback, only one agent is started, and the comment beside the autostart says how to get the stock prompt back. Verified end to end, including a real password accepted and three cancellations refused. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
8f0fe23377 |
Add Software Update, across packages, applications and firmware
Three sources that fail independently, so they are counted and applied separately: a flatpak mirror being down says nothing about whether a kernel security fix is waiting. Blending them into one number would hide exactly the case that matters. Checking costs about nine seconds, which is too long to spend every time a page opens, so the page opens on the last result and says when it was taken. A first visit with nothing cached goes and finds out rather than showing a confident "up to date" it has no basis for. Installing packages takes a snapshot first, named after what is about to happen, so Snapshots shows "before 32 package updates" rather than a timestamp. Best effort: a machine without snapper still updates, because an update that refuses to run when a nicety fails would be worse than one without a restore point. Automatic updates cover applications only, through a Panama-owned user timer running daily with a randomized delay. Packages still ask, and dnf-automatic is reported as absent rather than offered, because installing software is not a settings action. Health gained a check, and that is where the bug was: it first returned status "degraded", which is not in the doctor's vocabulary of ok, warning, error and unconfigured. It was counted as nothing at all while the summary still said healthy -- the same silent no-op this codebase keeps relearning. A contract now asserts every status a check can return is one the doctor counts, and the doctor's own contract knows about the new check rather than failing on its arrival. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
6997dd535f |
Add high contrast, and make remote desktop configurable
Two of the three panels still handed to GNOME, having actually checked each rather than repeating that they were not worth owning. Universal Access turned out to be mostly ours already: the magnifier, pointer size, text scale, motion and dimming were all present. High contrast was the real gap. It reaches GTK4 applications through the desktop portal, which republishes GNOME's accessibility setting as org.freedesktop.appearance contrast -- so no high-contrast theme is involved, and none is installed here. Verified end to end: committing the preference drove gsettings and the portal reported contrast 1. Sticky, slow and bounce keys stay absent. There is no Wayland or Hyprland implementation, and the compositor would store the XKB option while nothing ever acted on it. Remote desktop gained port, view-only, and clearing stored credentials. SETTING credentials opens a terminal running grdctl, which prompts for the password itself. That is not a hand-off for lack of effort: grdctl takes the password on a terminal and core-dumps without one, and the only alternative -- passing it as an argument -- would publish it through /proc to every process on this machine. Typed into grdctl directly it never passes through Panama, and a contract now fails if it ever appears on a command line. Color stays with GNOME, and not for lack of effort either. colord runs here with seven profiles and zero devices registered, because the daemons that register displays do not run under this session, and Hyprland exposes no ICC, gamma, or color-management option at all. A Color page could import a profile, attach it to nothing, and change nothing -- the same failure refused for rollback and printer drivers. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
1f40f8e136 |
Add a snapshot manager, and start covering home
The machine already had snapper running hourly on btrfs, so the tool was never missing. What was missing is that snapper's only configuration covered / -- and /home is a separate subvolume with no configuration at all. Six hundred and forty-three snapshots existed and not one of them contained a document. Anyone reaching for file history would have found their system and none of their files. /home now has a configuration on the same hourly timeline, with deliberately conservative retention: Steam's 1.2 TB lives on that subvolume and churns on every game update, so keeping five hourly and seven daily bounds what those updates can pin. Per volume, because on this machine "one is covered and the important one is not" was the news, and a timeline opening on system snapshots would have buried it. Inside a volume the timeline is the familiar view: points in time, newest first, each openable as a folder tree to take a file out of. Restoring sets the current version aside as .before-restore-N rather than overwriting it. A restore that destroys the thing you were about to compare against is how someone loses the work they were trying to save. Rollback is deliberately absent. snapper's rollback changes the btrfs default subvolume, and this system's fstab pins subvol= explicitly, which overrides it -- so a rollback would report success and change nothing after a reboot. A recovery feature that silently does nothing is worse than not having one, and making it work means editing fstab and the bootloader, whose failure cannot be repaired from inside the desktop. Per-snapshot size is reported as not measured, because measuring it needs btrfs quotas that cost performance on every write. Free space is shown instead, which is the number that decides anything. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
e9d567aa72 |
Own printers, driverless only
The fourth panel this desktop handed to GNOME Settings, and the last one worth owning. Driverless only, deliberately. Adding a printer that describes its own capabilities over IPP is supported; choosing a PPD or fetching a vendor driver is not, and the page says so rather than pretending. That restraint is the whole design: a wrong driver produces a printer that accepts jobs, reports success, and prints nothing, which is the worst failure this page could ship because it looks like it worked. A printer old enough to need a PPD stays a job for the system printer tool. Printers and the queue are separate cards because they answer separate questions. Which printers exist is one; where a document went is the other, and it is the one that actually brings someone here -- so the queue is a single list across every printer. Device URIs are validated by scheme before reaching CUPS, whose backends run as root. file: and pipe: do not lead to a printer and are refused here rather than further down. This machine has no printer, so the page was built against a temporary CUPS queue that was created, exercised through the service, and removed; the service was confirmed to observe the removal rather than merely perform it. Discovery and the driverless add path are verified by their refusals rather than against hardware. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
a23b42841a |
Own user accounts and sharing
Two of the panels this desktop still handed to GNOME Settings. Users manages the account through accountsservice -- the same daemon GNOME's panel drives, so a name or picture set here is what the login screen and lock screen read. Name, picture, account type, password, automatic login, and adding or removing other accounts. Every change is authorized by polkit through the agent this session already runs; a dismissed prompt is a normal outcome and says so. A new password is read from the helper's stdin, hashed by openssl reading its own stdin, and handed over D-Bus from inside that process. It is never an argument: argv is world-readable through /proc, so a password passed that way is published to every process on the machine. Removing an account takes two presses and says it destroys their files; the last administrator cannot be removed or demoted, because a machine nobody can administer is not a state to offer. Sharing reports what is actually true, including "the software for this is not installed" -- the honest answer for Samba here, and the case the panel it replaces shows as a switch that does nothing. Password sign-in is reported from sshd's configuration rather than assumed: claiming "keys only" when the file is silent would state a security property that cannot be backed up. The Control Center now draws the account's real picture and name. A generic glyph sat there while a real avatar was already set, which made the desktop look like it did not know whose it was. Also here: the KDE Connect contract no longer requires a phone to be awake. kdeconnectd drops its device objects for a phone it has not seen recently while the pairing survives in its config, so demanding one failed whenever the phone was off. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
dbd1472e6b |
Read busctl as JSON so device names keep their characters
A phone named "Gib's iPhone" with a typographic apostrophe was shown as "Gib\342\200\231s iPhone". busctl's default text output escapes every non-ASCII byte in octal, and escapes it into the output rather than into a quoted string a shell-style parser can undo, so shlex handed back the escape sequences as literal characters and they went straight to the page. Apostrophes were only the visible case: accents, emoji, quotes and backslashes were all affected, and a name containing a quote could have split a field. Property and method reads now use --json=short, which returns real UTF-8, and the parsers read a document rather than splitting words. That removes the class rather than unescaping octal by hand. The fixtures were the reason this stayed invisible: every test fed the text form and passed against output the helper is no longer asking for. They now carry what busctl actually emits in the mode used, plus a case for a non-ASCII name and one asserting the old text form is refused rather than parsed wrongly. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
8e93f08977 |
Show what the keyring holds, without showing what it holds
Managing a stored credential meant installing Seahorse. The keyring rows on Privacy could say whether it was locked and nothing about what was in it. Four rules, each pinned by a contract, because each is a way this could leak the thing it exists to protect: Listing never reads values. Enumerating reports labels and attributes; it does not ask the keyring to hand over what it is protecting. A secret never reaches a command line. /proc makes argv readable by every process on this machine, so a password passed as an argument is published to all of them. The helper reads the value in process and writes it to wl-copy on stdin. A secret never reaches an error message, a log, or a QML property. An exception raised while holding a password does not get to choose what text is printed, so the clipboard tool's stderr is discarded rather than echoed. Forgetting one is irreversible, so the first press asks and the second does it, and the confirming button is the only one wearing danger. The list is collapsed until asked for: opening Privacy should not enumerate someone's passwords as a side effect. A copied value clears itself about a minute later, but only if the clipboard still holds it -- the guard compares a SHA-256, so the waiting process never has the password. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
99433c0e8e |
Add a Storage page
Nothing showed what was using the drive, and removable media was handled by a tray helper with no surface in Settings at all. One scroll rather than tabs: space above, the device below. Every other settings page is a scrolling card stack, and a tab would not be deep-linkable from the launcher command or from search. Three things the page has to get right, each now pinned by a contract, because each is a way it could quietly lie. / and /home are one btrfs filesystem sharing one pool of free space, and a page that copies df shows double the free space that exists. zram is a block device and is not storage; counting it as a drive overstates this machine by 8 GB. Unmount and eject refuse anything not on a removable drive, because the UI is what asks and a UI can be wrong. The cheap read -- layout, usage, health -- runs when the page opens, at around 90ms. Measuring what is filling the drive means walking every file, so it happens on request and says so rather than showing an empty list that reads as "nothing here". Partitioning and formatting are deliberately absent. A settings pane is the wrong place to put erasing a disk two clicks deep; the page opens GNOME Disks for that. Adding the page found a fourth hard-coded page list in ShellState. A page missing from it does not error -- openSettings() falls back to "home", so the launcher opens the wrong page and logs nothing. A registry contract now holds the three lists together. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
a68e4f6dcd |
Make every settings page reachable from the launcher
Settings had a search index and the launcher had script commands, and neither knew about the other: finding a setting meant opening Settings first and searching there. One command per page is now generated from the same sources the in-app search reads -- the sidebar page list, the group routing, and the schema labels -- so a setting searchable inside Settings is searchable from the launcher without a second list to maintain. Generating it surfaced a gap in the in-app search as well. Six pages had no vocabulary at all, because their contents come from the system rather than our schema, so searching "volume" found nothing in Settings either. They now carry entries, which improves both surfaces. The product prefix is dropped from every hand-written command title. The generated ones are qualified "Settings: <page>" instead: a bare page label collides with the feature of the same name, and two commands sharing a title are indistinguishable in a launcher. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
91306ce810 |
Give libadwaita applications the desktop's accent
Files, Papers, Loupe and every other libadwaita application read their accent from the Settings portal, so they rendered in GNOME blue no matter which accent this desktop was set to -- correct on our own surfaces, wrong on half the screen. xdg-desktop-portal-gtk cannot serve org.freedesktop.appearance accent-color at all; the string does not appear in the 1.15.3 binary. The gnome backend serves it, so Settings now routes to gnome with gtk still listed behind it -- the frontend merges Settings backends in order, so color-scheme keeps resolving if the gnome backend is ever unavailable. GNOME's accent-color is a fixed enum of nine names rather than a color, so each of our eight accents carries its nearest member. Nearest by hue rather than by name: rose maps to red, because it is the red role in this palette. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
b4ce148caf |
Give each default-application role a whole family of types
Every role carried a single representative type, so setting "Images" changed image/png and left image/jpeg wherever it landed. That is how this desktop ended up opening PDFs in GIMP, PNGs in a pixel-art editor and MP3s in a video transcoder: nobody chose any of it, applications registered themselves for everything they could read, and the roles governed one type each. Roles now own families and write every type when set, the settings page exposes the documents, text and archives roles it never offered, and a new seed command curates a fresh machine during setup while always keeping a choice the user has already made. The shipped editor entry launches kitty explicitly. The stock nvim.desktop sets Terminal=true, which defers to whatever the system considers default rather than the terminal this desktop themes. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |
||
|
Gabriel Brown
|
588dec4adc |
Generate the settings reference from the schema
Every other form of documentation here has drifted at least once today: search routing that pointed at a page not containing the setting, a contract that pinned the bug the same commit fixed, and a comment in shell.qml that failed to stop me making the exact mistake it described. Prose describing 127 settings would drift the day after it was written. So docs/settings.md is generated, and a contract fails the moment the committed copy stops matching the schema. The document cannot be wrong for longer than it takes to run the suite. It reads the schema by parsing rather than importing, since there is no QML interpreter here and requiring a compositor to build documentation would be worse. That parser is the risk, so it FAILS LOUDLY: if it stops recognising the file it exits non-zero with the reason and writes nothing, because a partial reference is worse than a stale one -- stale is caught by --check, partial reads as complete. Verified: with the entry pattern broken it reports "only 0 entries parsed" and leaves the committed file untouched. The contract also proves --check actually compares content, by appending a line and confirming it fails, rather than trusting a command that returns success to mean anything. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L |