The fourth panel this desktop handed to GNOME Settings, and the last one
worth owning.
Driverless only, deliberately. Adding a printer that describes its own
capabilities over IPP is supported; choosing a PPD or fetching a vendor
driver is not, and the page says so rather than pretending. That
restraint is the whole design: a wrong driver produces a printer that
accepts jobs, reports success, and prints nothing, which is the worst
failure this page could ship because it looks like it worked. A printer
old enough to need a PPD stays a job for the system printer tool.
Printers and the queue are separate cards because they answer separate
questions. Which printers exist is one; where a document went is the
other, and it is the one that actually brings someone here -- so the
queue is a single list across every printer.
Device URIs are validated by scheme before reaching CUPS, whose backends
run as root. file: and pipe: do not lead to a printer and are refused
here rather than further down.
This machine has no printer, so the page was built against a temporary
CUPS queue that was created, exercised through the service, and removed;
the service was confirmed to observe the removal rather than merely
perform it. Discovery and the driverless add path are verified by their
refusals rather than against hardware.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Two of the panels this desktop still handed to GNOME Settings.
Users manages the account through accountsservice -- the same daemon
GNOME's panel drives, so a name or picture set here is what the login
screen and lock screen read. Name, picture, account type, password,
automatic login, and adding or removing other accounts. Every change is
authorized by polkit through the agent this session already runs; a
dismissed prompt is a normal outcome and says so.
A new password is read from the helper's stdin, hashed by openssl
reading its own stdin, and handed over D-Bus from inside that process.
It is never an argument: argv is world-readable through /proc, so a
password passed that way is published to every process on the machine.
Removing an account takes two presses and says it destroys their files;
the last administrator cannot be removed or demoted, because a machine
nobody can administer is not a state to offer.
Sharing reports what is actually true, including "the software for this
is not installed" -- the honest answer for Samba here, and the case the
panel it replaces shows as a switch that does nothing. Password sign-in
is reported from sshd's configuration rather than assumed: claiming
"keys only" when the file is silent would state a security property that
cannot be backed up.
The Control Center now draws the account's real picture and name. A
generic glyph sat there while a real avatar was already set, which made
the desktop look like it did not know whose it was.
Also here: the KDE Connect contract no longer requires a phone to be
awake. kdeconnectd drops its device objects for a phone it has not seen
recently while the pairing survives in its config, so demanding one
failed whenever the phone was off.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Nothing showed what was using the drive, and removable media was handled
by a tray helper with no surface in Settings at all.
One scroll rather than tabs: space above, the device below. Every other
settings page is a scrolling card stack, and a tab would not be
deep-linkable from the launcher command or from search.
Three things the page has to get right, each now pinned by a contract,
because each is a way it could quietly lie. / and /home are one btrfs
filesystem sharing one pool of free space, and a page that copies df
shows double the free space that exists. zram is a block device and is
not storage; counting it as a drive overstates this machine by 8 GB.
Unmount and eject refuse anything not on a removable drive, because the
UI is what asks and a UI can be wrong.
The cheap read -- layout, usage, health -- runs when the page opens, at
around 90ms. Measuring what is filling the drive means walking every
file, so it happens on request and says so rather than showing an empty
list that reads as "nothing here".
Partitioning and formatting are deliberately absent. A settings pane is
the wrong place to put erasing a disk two clicks deep; the page opens
GNOME Disks for that.
Adding the page found a fourth hard-coded page list in ShellState. A
page missing from it does not error -- openSettings() falls back to
"home", so the launcher opens the wrong page and logs nothing. A
registry contract now holds the three lists together.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Brings in panama-doctor (a 25-check diagnostic with fixture-backed
contracts), a Health service, a System Health page replacing Startup &
Services, and a bar indicator that stays absent until something is
actually degraded. All seven of its contracts pass on the merge.
Three things needed resolving rather than accepting:
The branch predates the debranding, so its user-visible strings still
named the product -- "Panama desktop is healthy", "Restart Panama",
"Panama tools". Rewritten to say the same thing without the name, which
is what the rest of the app now does.
Its Fedora hand-off card was a single button calling openGnomePanel
("network") under a subtitle naming five subjects. Main had already
replaced that with a row per subject, each opening the panel that owns
it, so those rows are ported into HealthPage instead. Printers and
online accounts stay on Network & Devices with the rest of the network
hardware.
That broke its own assertion, which matched the literal
openGnomePanel("network") string. Rewritten rather than reverted: it now
checks the boundary card exists and that every panel named in HealthPage
is one openGnomePanel actually allows, since a name outside the
allow-list opens nothing at all. Verified it catches a plausible-looking
wrong name.
SettingsShell and SettingsSidebar conflicted because both sides added
pages; resolved as the union, keeping its System Health page and live
footer alongside main's Mouse & Touchpad, Privacy & Security, Region &
Language and Online Accounts.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
GNOME Online Accounts is a daemon plus a D-Bus API, and the daemon
already runs in this session -- gvfs activates it, and all four accounts
on this machine work without gnome-shell involved anywhere. Only the
PANEL was GNOME's. The accounts themselves are ordinary D-Bus objects
that anything may read and modify.
So everything except the initial sign-in is now native: the account
list, per-service toggles for mail, calendar, contacts, files, photos,
music and chat, and removal. That is the whole Online Accounts panel
apart from one OAuth handshake.
Signing in is the exception, and only for OAuth providers. The daemon's
AddAccount takes credentials as an argument -- it stores them, it does
not obtain them -- and the code that runs Google's OAuth exchange lives
in libgoa-backend, which Fedora ships without a GIR binding, so it is
reachable from C only. Reimplementing it would mean our own Google
client credentials. That step is handed to GNOME's panel and the page
says so, because a hand-off the user does not expect reads as a bug.
Password-based providers (Nextcloud, IMAP, WebDAV) could be added
natively later; their credential keys are known now.
Accounts needing re-authentication are surfaced first, which turned up
something immediately: both Google accounts on this machine report
attention_needed, meaning their tokens have expired and they have
stopped syncing. GOA has known that all along and nothing outside its
own panel ever said so.
Every write re-reads the account list rather than assuming it landed.
GOA can refuse, and a toggle that springs back is the honest outcome.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
It is the system settings app for this desktop, so it is named the way
one is. The window is "Settings", the titlebar is "Settings", the
wordmark above the search field is gone, the sidebar's last row is
"About", and the status line reads "Desktop is healthy".
Prose followed the same rule. Forty-odd strings explained what "Panama"
does -- "Panama never animates while idle", "Restore Panama defaults",
"Panama looks in ~/Pictures/Wallpapers" -- which is how a product
describes itself, not how a settings panel describes a setting. They now
say what happens. No user-visible "Panama" remains anywhere in the app.
Two consequences worth naming:
The SUPER+I shortcut's description is user-visible, because the
Shortcuts page is generated from it, so that is renamed too. Rebindings
are keyed by shipped chord rather than description, so no existing
override is orphaned by this.
Three contracts matched the window by title and one matched that
shortcut by description; all four are updated. There are no Hyprland
window rules keyed on the title, so nothing about the window's placement
changes.
The desktop entry is now Name=Settings, but the FILE keeps its
panama-settings name, as does the icon: the dock pins applications by
desktop id, and renaming the file would silently unpin it.
dock-pins-contract covers exactly that.
The dated design docs under docs/superpowers keep the old name. They are
a record of what was decided when, and editing them to agree with the
present would make them lie about the past.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
More GNOME Settings parity.
Region & Language is new. The locale is localectl's, and Panama stores no
copy of it -- there is exactly one system locale, so a preference here
would be a second source of truth that drifts the moment anything else
changes it. Codes are resolved against iso-codes into "Portuguese
(Brazil)" the way GNOME does, with the code kept visible because it is
what actually gets written and someone choosing between two Spanish
variants needs to see it. Changing it is privileged and only applies to
programs started afterwards, so the page says a sign-out is needed
rather than claiming the new language is in use.
The service is called SystemLocale, not Locale: QML has a built-in
Locale value type that silently shadows a singleton of that name, and
every binding then reads properties off the wrong thing. The page
rendered empty with nothing but "cannot read property of undefined" to
explain it.
About now answers what GNOME's About answers -- model, processor,
memory, disk, OS, kernel, windowing system -- where before it listed
only Panama's own component versions. Graphics is joined from
GraphicsDevices rather than read again, because two readouts of the same
hardware are two things that can disagree. Placeholder DMI strings
("To Be Filled By O.E.M.") are filtered out, and unreadable facts are
omitted rather than shown as "Unknown".
The Fedora hand-off card was one row listing five subjects that opened
the network panel regardless. Naming a panel and then not opening it
reads as a broken button rather than a deliberate hand-off. Each subject
now opens the panel that owns it, and openGnomePanel takes an optional
subpage so "Users" reaches System's users page the way GNOME's own
desktop entry does, instead of dropping the user on System's front page.
Printers and online accounts are not repeated here; they stay with the
network hardware on Network & Devices.
One bug this surfaced, caught by the hyprland write contract: the Lua
config key and the hyprctl option name genuinely differ for tap to
click. hl.config wants input.touchpad.tap_to_click; getoption answers to
input:touchpad:tap-to-click. Either spelling used for both fails -- a
hyphen is not a Lua identifier, and the underscored name is not a known
option -- which is what the schema's two separate fields are for.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Continuing towards GNOME Settings parity. GNOME's Privacy panel covers
screen lock, camera and microphone access, file history, trash, and
device security; Panama had no equivalent page at all, despite already
tracking camera and microphone use for the bar indicator.
Device security is a new read-only readout: Secure Boot, TPM, disk
encryption, SELinux mode, and the firewall. None of these is a
preference -- they are set in firmware, at install time, or by system
policy, and a switch offering to change them would either fail or do
something far-reaching from a control that looks like every other
control. What it answers is "is this machine set up the way I think it
is", which otherwise takes five commands and root. Facts that cannot be
determined report Unknown rather than guessing, because a security
readout that quietly says "fine" when it failed to look is worse than
no readout.
File history and trash retention are deliberately NOT offered as
switches. They are GNOME preferences enforced by gsd-housekeeping, which
does not run in a Hyprland session -- verified, it is not running here.
Toggling them would store a preference, change nothing, and give no sign
of it. They are delegated to GNOME Settings by name instead.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Working towards parity with GNOME Settings, which splits pointing
devices into their own panel. Panama had pointer speed and focus-follows
buried under a page called "Input & Shortcuts", and had nothing at all
for scroll direction, acceleration profile, scroll speed, left-handed
buttons, or any touchpad setting -- all of which could only be changed
by editing hypr/input.lua by hand, which is the thing this app exists to
stop.
Every new mapping was read back off the running compositor rather than
assumed, and two were not what they look like: touchpad drag lock is an
int with three states, not a switch, and scroll factors are floats even
at their default of exactly 1. Getting either wrong makes every write to
that setting look rejected. The shape contract now covers 35 mapped
options, up from 23.
The touchpad card renders only when a touchpad is attached, which is
what InputDevices is for. On a desktop it would be worse than useless:
every switch on it would appear to work, because the preference is
stored and Hyprland accepts an option for a device class it has no
member of, so the settings would silently affect nothing.
Keyboard layout was read-only text, justified by a note saying changes
needed a compositor reload. That is not true in 0.56.2 -- setting
input:kb_variant through hl.config re-keymaps attached keyboards
immediately, verified by watching active_keymap on a real keyboard
change to "English (US, intl., with dead keys)" and back. So layout,
variant, and options are now real controls, joined by a TextEntryRow
that commits on Enter or focus loss rather than per keystroke, since
half a layout name is a valid string meaning something else.
Rejected input is shown as rejected rather than sanitised: these strings
are serialised into an hl.config payload, where stripping an unexpected
character would turn a typo into a different working setting.
Verified each new pointer option applies and reverts against the live
compositor. Schema, search, commit/reset, and system contracts pass.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Wires the schema entries and routing the codex agent needs for default
applications, weather, vitals refresh, notification timing, and capture,
so its pages can be written against keys that already exist.
Capture directories and encoder arguments are enums rather than free
text. Both are handed to a recorder process, and a settings page has no
reason to expose an arbitrary string there.
ApplicationsPage.qml is a placeholder so the page id can be routed,
registered, and searchable before the real page lands. It is owned by
the other agent and expected to be replaced wholesale.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Continues the settings expansion toward replacing GNOME Settings for
everything Panama actually owns.
Wallpaper. A thumbnail grid rather than a path field: the value of this
setting is the picture, so typing a path to something you cannot see is
the worst version of it. Two things about hyprpaper 0.8 shaped this. Its
IPC is much smaller than older documentation suggests -- preload,
listloaded, unload, and reload all answer "invalid hyprpaper request",
so setting is a single call with no preload. And the "<empty>,<path>"
form that used to mean every output is silently ignored, so a wallpaper
set that way appears to succeed and never changes; outputs are walked
explicitly instead. hyprpaper.conf lives in the repo through the
~/.config/hypr symlink and so cannot hold machine state, which is why
the choice lives in the shared settings store and is re-applied at
startup.
Power & Lock. hypridle has no IPC for reconfiguration and its config is
hyprlang rather than the shared JSON, so scripts/panama-idle generates a
config from the settings store and restarts the daemon. The generated
file lives under XDG_STATE_HOME for the same symlink reason, with a
systemd drop-in pointing hypridle at it. Management is a real state and
the page says which one you are in rather than showing sliders that
quietly do nothing. Zero means never for all three timers, which a naive
template would render as "immediately".
Date & Time. Deliberately not stored in Panama's settings: the timezone
and network time belong to the machine and are shared with sessions that
never see this file. Storing a copy would create a second answer to a
question the system already answers. Reads and writes timedatectl
directly; a cancelled polkit prompt surfaces as an error rather than as
a value that appears to have been accepted.
Accessibility. Pointer size and text scale have to agree across three
consumers with no shared configuration -- the compositor, GTK, and the
shell -- so the store is the source of truth and the values are pushed
outward to gsettings and hyprctl setcursor.
Search now indexes the schema instead of the twelve page labels. "gaps",
"wallpaper", and "screenshot" previously found nothing on an app that
has all three, which is the clearest way a settings app feels smaller
than it is. Shortcuts are indexed by what they do. A contract asserts
every non-internal schema label is reachable, so a new setting cannot be
added in an undiscoverable state.
The GNOME delegation allow-list was widened to the panel names
gnome-control-center actually reports; the previous list contained
"users", which is not one of them and so opened nothing.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Gabriel Brown