Fix external monitor brightness OSD

brightnessctl drives the kernel backlight class, which laptop panels
have and this desktop does not -- it reports only keyboard and NIC LEDs.
So BrightnessControl removed itself and there was no way to dim the
screen from Panama at all. DDC/CI is the channel the buttons on a
monitor's bezel drive, and it is the only brightness an external display
has. Both sources now render a row each, so a machine gets whichever it
actually has, or none.

Displays are enumerated from sysfs rather than `ddcutil detect`. The
kernel publishes the connector-to-bus mapping as
/sys/class/drm/<card>-<connector>/ddc along with whether anything is
plugged in, which beats parsing detect's undocumented brief output,
yields the connector name spelled exactly as Hyprland spells it, and
probes only connectors with a monitor attached -- one bus on this
machine rather than fourteen, where each empty bus costs a timeout.
No model name is read: Hyprland already knows what every output is
called, so the UI joins on the connector instead of keeping a second
source of truth that could disagree with the Displays page.

Writes are debounced, serial, and read back. Serial because DDC/CI has
no arbitration and two ddcutil processes on one bus interleave their
exchanges and both return garbage. Read back because a write is not a
promise: panels clamp to their own range, ignore values while waking
from standby, and drop writes that arrive too fast. Without the read the
slider would show what Panama asked for rather than what the monitor
did, which is the same class of lie as trusting `hyprctl keyword`.

Brightness is deliberately not a stored preference. The monitor
remembers it and the bezel buttons change it behind Panama's back, so
persisting it would mean restoring a value the panel had moved past.

The contract runs against fixtures with ddcutil stubbed and both sysfs
roots redirected, so it never touches a real monitor. Its fixture
reports a maximum of 200 rather than 100 on purpose -- at 100 the
scaling arithmetic is the identity and a helper that ignored the
reported maximum would pass everything. Verified it catches that, plus a
dropped connection-status filter and an unstripped connector prefix.

Not yet confirmed against hardware: this machine cannot open any I2C bus
yet. ddcutil's udev rule grants that through uaccess but only to devices
created after it was installed, so it needs one udevadm trigger. The
helper detects exactly that case and returns the command as its error
rather than reporting "no displays".

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L

.gitignore

@@ -13,3 +13,6 @@
 # Python helper bytecode is local runtime state.
 __pycache__/
 *.py[cod]
+
+# Generated from the colour scheme; machine state, not configuration.
+/config/dot/kitty/current-theme.conf

config/dot/hypr/keybinds.lua

@@ -30,6 +30,9 @@ local sysmonitor  = "flatpak run io.missioncenter.MissionCenter"
 -- Vicinae is the Raycast-style launcher. `vicinae toggle` shows/hides the
 -- window against the already-running server (started in autostart.lua).
 local launcher    = "vicinae toggle"
+local osd = function(action)
+    return "$HOME/.config/quickshell/scripts/panama-osd " .. action
+end
 
 -- Quickshell IPC targets. See quickshell/shell.qml for the handlers.
 local qs = function(target, fn) return "qs ipc call " .. target .. " " .. fn end
@@ -252,23 +255,23 @@ bind("CTRL + ALT + Delete", hl.dsp.exec_cmd(qs("powermenu", "toggle")), { descri
 -- ── Media and volume ────────────────────────────────────────────────────────
 -- locked = true keeps these working on the lock screen, as they do in GNOME.
 -- 6% steps match the GNOME volume-step setting.
-bind("XF86AudioRaiseVolume", hl.dsp.exec_cmd("wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 6%+"), { locked = true, repeating = true , description = "Volume up" })
+bind("XF86AudioRaiseVolume", hl.dsp.exec_cmd(osd("volume up 6")), { locked = true, repeating = true , description = "Volume up" })
-bind("XF86AudioLowerVolume", hl.dsp.exec_cmd("wpctl set-volume @DEFAULT_AUDIO_SINK@ 6%-"), { locked = true, repeating = true , description = "Volume down" })
+bind("XF86AudioLowerVolume", hl.dsp.exec_cmd(osd("volume down 6")), { locked = true, repeating = true , description = "Volume down" })
-bind("XF86AudioMute", hl.dsp.exec_cmd("wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"), { locked = true , description = "Mute" })
+bind("XF86AudioMute", hl.dsp.exec_cmd(osd("volume toggle")), { locked = true , description = "Mute" })
-bind("XF86AudioMicMute", hl.dsp.exec_cmd("wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"), { locked = true , description = "Mute microphone" })
+bind("XF86AudioMicMute", hl.dsp.exec_cmd(osd("microphone toggle")), { locked = true , description = "Mute microphone" })
 
 -- Fine-grained steps, matching GNOME's shift/alt volume modifiers.
-bind("SHIFT + XF86AudioRaiseVolume", hl.dsp.exec_cmd("wpctl set-volume -l 1 @DEFAULT_AUDIO_SINK@ 1%+"), { locked = true, repeating = true , description = "Volume up (fine)" })
+bind("SHIFT + XF86AudioRaiseVolume", hl.dsp.exec_cmd(osd("volume up 1")), { locked = true, repeating = true , description = "Volume up (fine)" })
-bind("SHIFT + XF86AudioLowerVolume", hl.dsp.exec_cmd("wpctl set-volume @DEFAULT_AUDIO_SINK@ 1%-"), { locked = true, repeating = true , description = "Volume down (fine)" })
+bind("SHIFT + XF86AudioLowerVolume", hl.dsp.exec_cmd(osd("volume down 1")), { locked = true, repeating = true , description = "Volume down (fine)" })
 
-bind("XF86AudioPlay", hl.dsp.exec_cmd("playerctl play-pause"), { locked = true , description = "Play or pause" })
+bind("XF86AudioPlay", hl.dsp.exec_cmd(osd("media play-pause")), { locked = true , description = "Play or pause" })
-bind("XF86AudioPause", hl.dsp.exec_cmd("playerctl play-pause"), { locked = true , description = "Play or pause" })
+bind("XF86AudioPause", hl.dsp.exec_cmd(osd("media play-pause")), { locked = true , description = "Play or pause" })
-bind("XF86AudioNext", hl.dsp.exec_cmd("playerctl next"), { locked = true , description = "Next track" })
+bind("XF86AudioNext", hl.dsp.exec_cmd(osd("media next")), { locked = true , description = "Next track" })
-bind("XF86AudioPrev", hl.dsp.exec_cmd("playerctl previous"), { locked = true , description = "Previous track" })
+bind("XF86AudioPrev", hl.dsp.exec_cmd(osd("media previous")), { locked = true , description = "Previous track" })
-bind("XF86AudioStop", hl.dsp.exec_cmd("playerctl stop"), { locked = true , description = "Stop playback" })
+bind("XF86AudioStop", hl.dsp.exec_cmd(osd("media stop")), { locked = true , description = "Stop playback" })
 
-bind("XF86MonBrightnessUp", hl.dsp.exec_cmd("brightnessctl -e4 -n2 set 5%+"), { locked = true, repeating = true , description = "Brightness up" })
+bind("XF86MonBrightnessUp", hl.dsp.exec_cmd(osd("brightness up 5")), { locked = true, repeating = true , description = "Brightness up" })
-bind("XF86MonBrightnessDown", hl.dsp.exec_cmd("brightnessctl -e4 -n2 set 5%-"), { locked = true, repeating = true , description = "Brightness down" })
+bind("XF86MonBrightnessDown", hl.dsp.exec_cmd(osd("brightness down 5")), { locked = true, repeating = true , description = "Brightness down" })
 
 -- Hardware keys GNOME mapped that have obvious equivalents.
 bind("XF86Tools", hl.dsp.exec_cmd(settings), { description = "Settings" })

config/dot/hypr/looks.lua

@@ -29,7 +29,11 @@ hl.config({
             active_border   = { colors = { "rgba(82aaffee)", "rgba(b172b0ee)" }, angle = 115 },
             -- Unfocused windows get no colour at all. The gradient only means
             -- something if exactly one window on screen is wearing it.
-            inactive_border = "rgba(3b426199)",
+            -- Follows the colour scheme: a dark neutral is invisible against a
+            -- light desktop. services/ColorScheme.qml applies changes live;
+            -- this is the value a fresh session starts from.
+            inactive_border = prefs.get("colorScheme", "dark") == "light"
+                and "rgba(a8aecb99)" or "rgba(3b426199)",
         },
 
         resize_on_border = true,
@@ -115,7 +119,11 @@ hl.config({
         disable_hyprland_logo    = true,
         disable_splash_rendering = true,
 
-        font_family = "Adwaita Sans",
+        -- Same setting as Theme.fontFamily in the shell. If only the QML side
+        -- followed the preference, the compositor and the shell would disagree
+        -- about the interface font and nobody would notice until a tooltip
+        -- rendered in a different typeface.
+        font_family = prefs.get("interfaceFont", "Adwaita Sans"),
 
         -- Variable refresh rate. 3 = enable only for fullscreen windows whose
         -- content type is "video" or "game" -- the tag rules.lua applies to

config/dot/kitty/kitty.conf

@@ -183,7 +183,6 @@ font_size 14.0
 
 #: Cursor customization {{{
 
-cursor #c8d3f5
 
 #: Default cursor color. If set to the special value none the cursor
 #: will be rendered with a "reverse video" effect. It's color will be
@@ -193,7 +192,6 @@ cursor #c8d3f5
 #: precedence. Also, the cursor colors are modified if the cell
 #: background and foreground colors have very low contrast.
 
-cursor_text_color #111325
 
 #: The color of text under the cursor. If you want it rendered with
 #: the background color of the cell underneath instead, use the
@@ -312,7 +310,6 @@ cursor_shape block
 #: robustly with the ever-changing sea of bugs that is Cocoa is too
 #: much effort.
 
-url_color #4fd6be
 # url_style curly
 
 #: The color and style for highlighting URLs on mouse-over. url_style
@@ -734,12 +731,10 @@ window_border_width 1pt
 #: placed centrally. A value of top-left means the padding will be
 #: only at the bottom and right edges.
 
-active_border_color #82aaff
 
 #: The color for the border of the active window. Set this to none to
 #: not draw borders around the active window.
 
-inactive_border_color #2f334d
 
 #: The color for the border of inactive windows.
 
@@ -960,16 +955,11 @@ tab_powerline_style round
 #: Template to use for active tabs. If not specified falls back to
 #: tab_title_template.
 
-active_tab_foreground   #1e2030
-active_tab_background   #82aaff
 # active_tab_font_style   bold-italic
-inactive_tab_foreground #c8d3f5
-inactive_tab_background #42465a
 # inactive_tab_font_style normal
 
 #: Tab bar colors and styles.
 
-tab_bar_background #222436
 
 #: Background color for the tab bar. Defaults to using the terminal
 #: background color.
@@ -983,8 +973,8 @@ tab_bar_margin_color none
 
 #: Color scheme {{{
 
-foreground #c8d3f5
+
-background #222436
+include current-theme.conf
 
 #: The foreground and background colors.
 
@@ -1043,8 +1033,6 @@ dim_opacity 1
 #: How much to dim text that has the DIM/FAINT attribute set. One
 #: means no dimming and zero means fully dimmed (i.e. invisible).
 
-selection_foreground #2d3f76
-selection_background #c8d3f5
 
 #: The foreground and background colors for text selected with the
 #: mouse. Setting both of these to none will cause a "reverse video"
@@ -1060,47 +1048,29 @@ selection_background #c8d3f5
 #: dull and bright version, for the first 16 colors. You can set the
 #: remaining 240 colors as color16 to color255.
 
-color0 #1b1d2b
-color8 #444a73
 
 #: black
 
-color1 #ff757f
-color9 #ff757f
 
 #: red
 
-color2  #a5e8b5
-color10 #a5e8b5
 
 #: green
-color3  #ffc777
-color11 #ffc777
 
 #: yellow
 
-color4  #82aaff
-color12 #82aaff
 
 #: blue
 
-color5  #c099ff
-color13 #c099ff
 
 #: magenta
 
-color6  #86e1fc
-color14 #86e1fc
 
 #: cyan
 
-color7  #828bb8
-color15 #c8d3f5
 
 #: white
 
-color16 #ff966c
-color17 #c53b53
 
 # mark1_foreground black
 

config/dot/kitty/themes/tokyonight-day.conf

@@ -0,0 +1,38 @@
+# Tokyo Night Day — the palette's own light variant.
+#
+# The same hues as Moon at a different lightness, so a terminal in light mode
+# still belongs to this desktop rather than looking like a different machine.
+# Kept in the same order as tokyonight-moon.conf so the two can be diffed.
+
+cursor #3760bf
+cursor_text_color #e1e2e7
+url_color #118c74
+active_border_color #2e7de9
+inactive_border_color #c4c8da
+active_tab_foreground   #e1e2e7
+active_tab_background   #2e7de9
+inactive_tab_foreground #3760bf
+inactive_tab_background #c4c8da
+tab_bar_background #e1e2e7
+foreground #3760bf
+background #e1e2e7
+selection_foreground #e1e2e7
+selection_background #99a7df
+color0 #e9e9ed
+color8 #a1a6c5
+color1 #f52a65
+color9 #f52a65
+color2  #587539
+color10 #587539
+color3  #8c6c3e
+color11 #8c6c3e
+color4  #2e7de9
+color12 #2e7de9
+color5  #9854f1
+color13 #9854f1
+color6  #007197
+color14 #007197
+color7  #6172b0
+color15 #3760bf
+color16 #b15c00
+color17 #c64343

config/dot/kitty/themes/tokyonight-moon.conf

@@ -0,0 +1,42 @@
+# Tokyo Night Moon — the dark theme Panama ships.
+#
+# Extracted from kitty.conf so the two schemes can be swapped. kitty.conf
+# includes current-theme.conf, which Panama generates from the colour scheme
+# setting; that generated file is gitignored because it is machine state.
+#
+# Live changes go through `kitty @ set-colors`, which is why kitty.conf enables
+# remote control. Without it a scheme change would only reach terminals opened
+# afterwards.
+
+cursor #c8d3f5
+cursor_text_color #111325
+url_color #4fd6be
+active_border_color #82aaff
+inactive_border_color #2f334d
+active_tab_foreground #1e2030
+active_tab_background #82aaff
+inactive_tab_foreground #c8d3f5
+inactive_tab_background #42465a
+tab_bar_background #222436
+foreground #c8d3f5
+background #222436
+selection_foreground #2d3f76
+selection_background #c8d3f5
+color0 #1b1d2b
+color8 #444a73
+color1 #ff757f
+color9 #ff757f
+color2 #a5e8b5
+color10 #a5e8b5
+color3 #ffc777
+color11 #ffc777
+color4 #82aaff
+color12 #82aaff
+color5 #c099ff
+color13 #c099ff
+color6 #86e1fc
+color14 #86e1fc
+color7 #828bb8
+color15 #c8d3f5
+color16 #ff966c
+color17 #c53b53

config/dot/nvim/lua/config/autocmds.lua

@@ -10,3 +10,6 @@ vim.api.nvim_create_autocmd("BufWritePre", {
     vim.fn.winrestview(view)
   end,
 })
+
+-- Follow the desktop's light/dark setting while running, not only at startup.
+require("config.panama").watch()

config/dot/nvim/lua/config/panama.lua

@@ -0,0 +1,88 @@
+-- Panama desktop integration.
+--
+-- Neovim is the one application here that neither reads the desktop portal nor
+-- has a control socket open by default, so it reads the shared settings file
+-- directly -- the same ~/.config/panama/settings.json that the shell and the
+-- Hyprland config read.
+--
+-- Nothing here may raise. A missing or malformed settings file must cost the
+-- user their colour scheme preference and nothing else; editing text is more
+-- important than matching the desktop.
+
+local M = {}
+
+local function settings_path()
+  local config_home = os.getenv("XDG_CONFIG_HOME")
+  if config_home == nil or config_home == "" then
+    local home = os.getenv("HOME")
+    if home == nil or home == "" then
+      return nil
+    end
+    config_home = home .. "/.config"
+  end
+  return config_home .. "/panama/settings.json"
+end
+
+-- "dark" or "light". Defaults to dark, which is what Panama ships.
+function M.color_scheme()
+  local path = settings_path()
+  if not path then
+    return "dark"
+  end
+
+  local ok, contents = pcall(function()
+    local file = io.open(path, "r")
+    if not file then
+      return nil
+    end
+    local text = file:read("*a")
+    file:close()
+    return text
+  end)
+  if not ok or not contents or contents == "" then
+    return "dark"
+  end
+
+  local decoded_ok, decoded = pcall(vim.json.decode, contents)
+  if not decoded_ok or type(decoded) ~= "table" then
+    return "dark"
+  end
+
+  return decoded.colorScheme == "light" and "light" or "dark"
+end
+
+function M.is_light()
+  return M.color_scheme() == "light"
+end
+
+-- tokyonight ships a light variant in the same family, so light mode stays the
+-- same identity rather than becoming a different editor theme.
+function M.tokyonight_style()
+  return M.is_light() and "day" or "moon"
+end
+
+-- Re-apply the scheme when the window regains focus.
+--
+-- Neovim reads the setting once at startup and has no control socket open by
+-- default, so an editor already running when the desktop scheme flips would
+-- otherwise stay on the old palette until it was restarted. FocusGained is
+-- cheap, happens exactly when you would notice the mismatch, and does nothing
+-- at all unless the scheme actually changed.
+function M.watch()
+  local applied = M.color_scheme()
+
+  vim.api.nvim_create_autocmd("FocusGained", {
+    group = vim.api.nvim_create_augroup("PanamaColorScheme", { clear = true }),
+    callback = function()
+      local current = M.color_scheme()
+      if current == applied then
+        return
+      end
+      applied = current
+      vim.o.background = current
+      pcall(vim.cmd.colorscheme, current == "light" and "tokyonight-day" or "tokyonight-moon")
+    end,
+  })
+end
+
+return M

config/dot/nvim/lua/plugins/colorscheme.lua

@@ -1,31 +1,68 @@
+-- Tokyo Night, following the desktop's colour scheme.
+--
+-- Moon when Panama is dark, Day when it is light. Same theme family either way,
+-- so the editor keeps the identity the rest of the desktop has rather than
+-- becoming a different-looking application when the scheme flips.
+--
+-- The readability fixes below are deliberately dark-only. They were written
+-- against Moon's palette -- a pale comment colour, a mid-grey gutter -- and
+-- applying them to Day would put light grey text on a light background, which
+-- is exactly the legibility problem they exist to solve, inverted.
+
+local panama = require("config.panama")
+
 return {
   {
     "folke/tokyonight.nvim",
-    opts = {
+    opts = function()
-      style = "moon",
+      local light = panama.is_light()
+
+      return {
+        style = panama.tokyonight_style(),
+        light_style = "day",
         transparent = true,
+
         on_colors = function(colors)
+          if light then
+            -- Day's defaults are tuned for a light ground and mostly need no
+            -- help. Comments are the exception: the shipped #848cb5 measures
+            -- 2.54:1 against the #e1e2e7 background, well under the 3:1 floor
+            -- for secondary text. This is 3.25:1 -- readable, and still clearly
+            -- dimmer than Normal's 4.52:1 so it does not compete with code.
+            colors.comment = "#7079a8"
+            return
+          end
+
           colors.comment = "#a0a7c5"
           colors.fg_gutter = "#787f93"
           colors.terminal_black = "#828bb8"
         end,
+
         on_highlights = function(highlights, colors)
-        -- Fix inline code visibility in markdown
+          -- Inline code in markdown is invisible at both lightnesses without
+          -- an explicit background, because the theme leaves it unset.
           highlights["@markup.raw.markdown_inline"] = {
-          bg = colors.terminal_black,
+            bg = light and colors.bg_highlight or colors.terminal_black,
             fg = colors.fg,
           }
           highlights["RenderMarkdownCodeInline"] = {
-          bg = colors.terminal_black,
+            bg = light and colors.bg_highlight or colors.terminal_black,
             fg = colors.fg,
           }
-        -- Fix LspReference* readability: DiagnosticUnnecessary dims fg for unused
+
-        -- imports, making text nearly invisible against LspReferenceText's background
+          -- LspReference* readability: DiagnosticUnnecessary dims fg for unused
-        highlights["LspReferenceText"] = { bg = colors.fg_gutter, fg = colors.fg }
+          -- imports, making text nearly invisible against LspReferenceText's
-        highlights["LspReferenceRead"] = { bg = colors.fg_gutter, fg = colors.fg }
+          -- background.
-        highlights["LspReferenceWrite"] = { bg = colors.fg_gutter, fg = colors.fg }
+          local reference = {
+            bg = light and colors.bg_visual or colors.fg_gutter,
+            fg = colors.fg,
+          }
+          highlights["LspReferenceText"] = reference
+          highlights["LspReferenceRead"] = reference
+          highlights["LspReferenceWrite"] = reference
+        end,
+      }
     end,
-    },
   },
   {
     "LazyVim/LazyVim",

config/dot/quickshell/config/PreferenceSchema.qml

@@ -369,6 +369,73 @@ Singleton {
             detail: "Requires your password when the machine wakes"
         },
 
+        // ── Night light schedule ────────────────────────────────────────────
+        // Hours as decimals, so 17.5 is half past five. Wrapping past midnight
+        // is normal here and is what the shipped values do: on at 17:00, off at
+        // 10:00 the following morning.
+        {
+            key: "nightLightFrom", type: "real", def: 17.0, min: 0, max: 23.5, step: 0.5,
+            group: "nightLight",
+            label: "Turns on at",
+            detail: "Only used when Night Light follows a schedule"
+        },
+        {
+            key: "nightLightTo", type: "real", def: 10.0, min: 0, max: 23.5, step: 0.5,
+            group: "nightLight",
+            label: "Turns off at",
+            detail: "A time earlier than the start simply means the next morning"
+        },
+
+        // ── Colour scheme ───────────────────────────────────────────────────
+        // Light is Tokyo Night Day, the official light variant, rather than a
+        // palette invented to merely not be dark. Both share the same hues at
+        // different lightness, which is what keeps the Prism identity intact
+        // across the switch.
+        //
+        // services/ColorScheme.qml pushes the choice to GTK and to the
+        // compositor's border colours, because an application toolbar or a
+        // window border still wearing the other scheme is more jarring than
+        // either scheme on its own.
+        {
+            key: "colorScheme", type: "enum", def: "dark", group: "appearance",
+            label: "Appearance",
+            detail: "Light and dark share one identity, not two themes",
+            options: [
+                { value: "dark", label: "Dark" },
+                { value: "light", label: "Light" }
+            ]
+        },
+
+        // ── Typography ──────────────────────────────────────────────────────
+        // The single largest thing in this desktop that used to be changeable
+        // only by editing Theme.qml.
+        //
+        // interfaceFont is every piece of text a person reads. iconFont is used
+        // ONLY to draw glyphs -- workspace pills, the status cluster, search
+        // icons -- so it must carry Nerd Font glyphs; a plain monospace family
+        // there replaces every icon in the shell with tofu, which is why the
+        // picker offers them as a separate, filtered list.
+        {
+            key: "interfaceFont", type: "string", def: "Adwaita Sans", group: "typography",
+            // A family name, matched by fontconfig. Constrained because it also
+            // reaches hl.config as a string in hypr/looks.lua.
+            pattern: "^[A-Za-z0-9 ._-]{1,64}$",
+            label: "Interface font",
+            detail: "Used for every piece of text in the shell"
+        },
+        {
+            key: "iconFont", type: "string", def: "VictorMono Nerd Font", group: "typography",
+            pattern: "^[A-Za-z0-9 ._-]{1,64}$",
+            label: "Icon font",
+            detail: "Draws the shell's glyphs, so it must be a Nerd Font"
+        },
+        {
+            key: "interfaceFontSize", type: "int", def: 13, min: 10, max: 18, step: 1,
+            unit: "px", group: "typography",
+            label: "Interface text size",
+            detail: "The base size the rest of the shell's type scales from"
+        },
+
         // ── Accessibility ───────────────────────────────────────────────────
         // Backed by gsettings so GTK applications agree with the shell, and
         // pushed to the compositor as well where it has its own notion.
@@ -402,6 +469,47 @@ Singleton {
             detail: "How often Panama updates the current conditions"
         },
 
+        // ── Which GPU the vitals readout tracks ─────────────────────────────
+        // A sysfs path rather than a card number, because the number is neither
+        // stable across machines nor meaningful. Constrained to the one shape
+        // that can be read for utilisation; VitalsWidget hides itself when the
+        // path is unreadable, so a stale value degrades to no readout rather
+        // than a wrong one.
+        {
+            key: "gpuBusyPath", type: "string",
+            def: "/sys/class/drm/card1/device/gpu_busy_percent",
+            group: "vitals", internal: true,
+            pattern: "^/sys/class/drm/card[0-9]+/device/gpu_busy_percent$",
+            label: "Graphics device",
+            detail: "Which GPU the graphics readout in the bar measures"
+        },
+
+        // ── Weather location ────────────────────────────────────────────────
+        // Coordinates rather than a place name, because that is what Open-Meteo
+        // takes and it needs no API key. weatherLocation is only the label shown
+        // in the UI; it is never sent anywhere, so it can say whatever makes the
+        // reading recognisable.
+        {
+            key: "weatherLatitude", type: "real", def: 27.7375, min: -90, max: 90, step: 0.0001,
+            group: "weather", internal: true,
+            label: "Latitude",
+            detail: "Set by choosing a location"
+        },
+        {
+            key: "weatherLongitude", type: "real", def: -82.6861, min: -180, max: 180, step: 0.0001,
+            group: "weather", internal: true,
+            label: "Longitude",
+            detail: "Set by choosing a location"
+        },
+        {
+            key: "weatherLocation", type: "string", def: "Local weather", group: "weather",
+            internal: true,
+            // Display only -- never sent to the weather service.
+            pattern: "^[^\\n]{1,64}$",
+            label: "Weather location",
+            detail: "The place the weather reading is for"
+        },
+
         // ── Vitals refresh ──────────────────────────────────────────────────
         {
             key: "vitalsIntervalMs", type: "int", def: 2000, min: 500, max: 10000, step: 500,
@@ -476,13 +584,18 @@ Singleton {
         // A "json" value: the ordered list of desktop entry ids pinned to the
         // dock. Kept in the shared store so that reordering the dock is covered
         // by Restore defaults like everything else, rather than living in its
-        // own file. The shipped order is the GNOME dash it replaced.
+        // own file. The shipped order is the GNOME dash it replaced, with one
+        // deliberate substitution: Panama Settings takes the first slot rather
+        // than GNOME Settings. Panama now covers what GNOME Settings did for
+        // this desktop and delegates the remainder to it by name, so pinning
+        // the thing it delegates TO put the fallback in front of the real one.
+        // GNOME Settings stays installed and searchable in the launcher.
         {
             key: "dockPinned", type: "json", group: "dock",
             label: "Pinned applications",
             detail: "Applications that stay in the Dock whether or not they are running",
             def: [
-                "org.gnome.Settings", "kitty", "org.gnome.Nautilus",
+                "panama-settings", "kitty", "org.gnome.Nautilus",
                 "com.bitwarden.desktop", "org.gnome.Software", "helium",
                 "org.mozilla.thunderbird_esr", "com.slack.Slack",
                 "app.bluebubbles.BlueBubbles", "rustdesk",
@@ -521,6 +634,21 @@ Singleton {
             detail: "Resolution, scale, and rotation per connected display"
         },
 
+        // ── Per-application notification rules ──────────────────────────────
+        // { "<appId>": { enabled, showOnLockScreen, showContentOnLockScreen } }
+        //
+        // Absent means "no rule", which is not the same as a rule that allows
+        // everything: a new application must be able to notify without needing
+        // an entry written for it first. services/Notifs.qml treats a missing
+        // entry as permissive and Do Not Disturb remains an override on top,
+        // rather than being duplicated per application.
+        {
+            key: "notificationAppRules", type: "json", def: ({}), group: "notifications",
+            internal: true,
+            label: "Application notification rules",
+            detail: "Per-application notification and lock-screen visibility preferences"
+        },
+
         // ── Internal ────────────────────────────────────────────────────────
         {
             key: "lastPage", type: "string", def: "home", group: "internal",

config/dot/quickshell/config/Settings.qml

@@ -22,12 +22,12 @@ Singleton {
     // ── Weather ─────────────────────────────────────────────────────────────
     // Coordinates taken from the GNOME night-light setting, which had already
     // resolved the location. Uses Open-Meteo, which needs no API key.
-    readonly property real latitude: 27.7375
+    readonly property real latitude: DesktopPreferences.get("weatherLatitude")
-    readonly property real longitude: -82.6861
+    readonly property real longitude: DesktopPreferences.get("weatherLongitude")
     // Open-Meteo returns coordinates but no friendly place name. Keep the
     // label deliberately general rather than exposing precise coordinates in
     // the UI or guessing at a city from them.
-    readonly property string weatherLocation: "Local weather"
+    readonly property string weatherLocation: DesktopPreferences.get("weatherLocation")
     readonly property string temperatureUnit: DesktopPreferences.get("temperatureUnit")
     readonly property int weatherRefreshMinutes: DesktopPreferences.get("weatherRefreshMinutes")
 
@@ -41,13 +41,13 @@ Singleton {
 
     // amdgpu exposes utilisation here. Verified present on this machine; the
     // widget hides itself if the path is missing rather than showing zeros.
-    readonly property string gpuBusyPath: "/sys/class/drm/card1/device/gpu_busy_percent"
+    readonly property string gpuBusyPath: DesktopPreferences.get("gpuBusyPath")
 
     // ── Night light ─────────────────────────────────────────────────────────
     // Matches the (disabled) GNOME schedule: 3500K from 17:00 to 10:00.
     readonly property int nightLightTemperature: DesktopPreferences.get("nightLightTemperature")
-    readonly property real nightLightFrom: 17.0
+    readonly property real nightLightFrom: DesktopPreferences.get("nightLightFrom")
-    readonly property real nightLightTo: 10.0
+    readonly property real nightLightTo: DesktopPreferences.get("nightLightTo")
     readonly property bool nightLightEnabledByDefault: DesktopPreferences.get("nightLightEnabled")
 
     // ── Notifications ───────────────────────────────────────────────────────

config/dot/quickshell/config/Theme.qml

@@ -18,36 +18,47 @@ import QtQuick
 Singleton {
     id: root
 
+    // ── Colour scheme ───────────────────────────────────────────────────────
+    // Tokyo Night ships an official light variant (Day), so light mode is that
+    // rather than a palette invented to merely not be dark. The two share the
+    // same hues at different lightness, which is what lets the Prism identity
+    // survive the switch: blue still leads into orchid, it is simply a darker
+    // blue on a lighter ground.
+    //
+    // Every token below is a binding on this, so flipping it repaints the whole
+    // shell without anything needing to know it happened.
+    readonly property bool dark: DesktopPreferences.get("colorScheme") !== "light"
+
     // ── Palette ─────────────────────────────────────────────────────────────
     // Canonical Tokyo Night Moon. `accent` matches the GNOME accent exactly.
-    readonly property color bg: "#222436"
+    readonly property color bg: root.dark ? "#222436" : "#e1e2e7"
-    readonly property color bgDark: "#1e2030"
+    readonly property color bgDark: root.dark ? "#1e2030" : "#d3d5de"
-    readonly property color bgHighlight: "#2f334d"
+    readonly property color bgHighlight: root.dark ? "#2f334d" : "#c4c8da"
-    readonly property color bgPanel: "#2e2f3d" // dock glass surface
+    readonly property color bgPanel: root.dark ? "#2e2f3d" : "#d9dae3" // dock glass surface
-    readonly property color bgPopover: "#21212f" // Openbar submenu background
+    readonly property color bgPopover: root.dark ? "#21212f" : "#eaeaee" // Openbar submenu background
 
-    readonly property color fg: "#c8d3f5"
+    readonly property color fg: root.dark ? "#c8d3f5" : "#3760bf"
-    readonly property color fgDim: "#828bb8"
+    readonly property color fgDim: root.dark ? "#828bb8" : "#6172b0"
-    readonly property color fgMuted: "#636da6"
+    readonly property color fgMuted: root.dark ? "#636da6" : "#848cb5"
-    readonly property color gutter: "#3b4261"
+    readonly property color gutter: root.dark ? "#3b4261" : "#a8aecb"
 
     // The pair. `accent` is the primary and carries every state meaning
     // (focused, active, on). `accentSecondary` is the orchid from the tmux
     // theme — it never appears alone, only as the far end of a gradient. That
     // restraint is the whole point: the two colours meeting is the signature,
     // so the pink stops being special the moment it's used as a flat fill.
-    readonly property color accent: "#82aaff" // blue
+    readonly property color accent: root.dark ? "#82aaff" : "#2e7de9" // blue
-    readonly property color accentSecondary: "#b172b0" // orchid, from tmux
+    readonly property color accentSecondary: root.dark ? "#b172b0" : "#9854f1" // orchid, from tmux
-    readonly property color accentAlt: "#65bcff" // blue1, a lighter blue
+    readonly property color accentAlt: root.dark ? "#65bcff" : "#007197" // blue1, a lighter blue
-    readonly property color cyan: "#86e1fc"
+    readonly property color cyan: root.dark ? "#86e1fc" : "#007197"
-    readonly property color teal: "#4fd6be"
+    readonly property color teal: root.dark ? "#4fd6be" : "#118c74"
-    readonly property color green: "#c3e88d"
+    readonly property color green: root.dark ? "#c3e88d" : "#587539"
-    readonly property color yellow: "#ffc777"
+    readonly property color yellow: root.dark ? "#ffc777" : "#8c6c3e"
-    readonly property color orange: "#ff966c"
+    readonly property color orange: root.dark ? "#ff966c" : "#b15c00"
-    readonly property color red: "#ff757f"
+    readonly property color red: root.dark ? "#ff757f" : "#f52a65"
-    readonly property color redDeep: "#c53b53"
+    readonly property color redDeep: root.dark ? "#c53b53" : "#c64343"
-    readonly property color magenta: "#c099ff"
+    readonly property color magenta: root.dark ? "#c099ff" : "#9854f1"
-    readonly property color pink: "#fca7ea"
+    readonly property color pink: root.dark ? "#fca7ea" : "#d20065"
 
     // Semantic aliases — prefer these in widgets so intent survives a repaint.
     readonly property color ok: green
@@ -59,11 +70,14 @@ Singleton {
     // The dock sits on compositor blur, so its fill is deliberately very
     // translucent. Popovers are near-opaque because they carry text that must
     // stay legible. The bar itself has no surface or alpha token.
-    readonly property real dockAlpha: 0.34
+    // Light surfaces need more opacity for the same sense of a solid panel: the
-    readonly property real popoverAlpha: 0.92
+    // same 0.34 that reads as glass over a dark desktop reads as haze over a
-    readonly property real overlayAlpha: 0.55
+    // light one, and text on it stops being legible.
-    readonly property real hoverAlpha: 0.14
+    readonly property real dockAlpha: root.dark ? 0.34 : 0.62
-    readonly property real activeAlpha: 0.24
+    readonly property real popoverAlpha: root.dark ? 0.92 : 0.97
+    readonly property real overlayAlpha: root.dark ? 0.55 : 0.40
+    readonly property real hoverAlpha: root.dark ? 0.14 : 0.10
+    readonly property real activeAlpha: root.dark ? 0.24 : 0.18
 
     // ── Geometry ────────────────────────────────────────────────────────────
     readonly property int barHeight: 36
@@ -90,12 +104,12 @@ Singleton {
     // Adwaita Sans for everything the user reads as text. No exceptions: a
     // monospaced clock or percentage reads as a terminal readout pasted into a
     // UI, which is the opposite of the intent here.
-    readonly property string fontFamily: "Adwaita Sans"
+    readonly property string fontFamily: DesktopPreferences.get("interfaceFont")
 
     // Nerd Font, used ONLY to draw icon glyphs — never for text. It is the
     // pragmatic alternative to freedesktop symbolic icons, which ship with a
     // hardcoded dark fill Qt will not recolour (see widgets/ThemedIcon.qml).
-    readonly property string fontMono: "VictorMono Nerd Font"
+    readonly property string fontMono: DesktopPreferences.get("iconFont")
 
     // Apply to any text whose digits change in place — clocks, percentages,
     // elapsed timers, dimension readouts. Tabular figures all share one
@@ -107,10 +121,13 @@ Singleton {
     readonly property var tabularFigures: ({
             "tnum": 1
         })
-    readonly property int fontSize: 13
+    // The four sizes are a scale, not four independent numbers: they move
-    readonly property int fontSizeSmall: 11
+    // together so the relationship between body, caption, heading and title
-    readonly property int fontSizeLarge: 16
+    // survives a change to the base rather than drifting apart.
-    readonly property int fontSizeTitle: 20
+    readonly property int fontSize: DesktopPreferences.get("interfaceFontSize")
+    readonly property int fontSizeSmall: Math.max(9, root.fontSize - 2)
+    readonly property int fontSizeLarge: root.fontSize + 3
+    readonly property int fontSizeTitle: root.fontSize + 7
 
     // ── Motion ──────────────────────────────────────────────────────────────
     // Event-driven only. Nothing in this shell animates while idle — no pulse,

config/dot/quickshell/connectivity-harness.qml

@@ -0,0 +1,28 @@
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+import qs.services
+
+ShellRoot {
+    IpcHandler {
+        target: "connectivity-test"
+
+        function status(): string {
+            return JSON.stringify({
+                wifiDevice: Connectivity.wifiDevice ? Connectivity.wifiDevice.name : "",
+                wiredDevice: Connectivity.wiredDevice ? Connectivity.wiredDevice.name : "",
+                wiredConnected: !!(Connectivity.wiredDevice && Connectivity.wiredDevice.connected),
+                networks: Connectivity.networks.length,
+                activeSsid: Connectivity.activeNetwork ? Connectivity.activeNetwork.name : "",
+                activeStrength: Connectivity.activeNetwork ? Connectivity.activeNetwork.signalStrength : -1,
+                activeLabel: Connectivity.activeNetwork ? Connectivity.signalLabel(Connectivity.activeNetwork.signalStrength) : "",
+                adapter: Connectivity.adapter ? true : false,
+                btDevices: Connectivity.bluetoothDevices.length
+            });
+        }
+
+        function labelFor(strength: real): string { return Connectivity.signalLabel(strength); }
+        function setActive(on: bool): void { Connectivity.active = on; }
+    }
+}

config/dot/quickshell/dock-pin-harness.qml

@@ -0,0 +1,35 @@
+import Quickshell
+import Quickshell.Io
+import QtQuick
+import qs.config
+
+ShellRoot {
+    // DesktopEntries populates asynchronously. Reading `applications.values`
+    // here rather than calling byId() blind is the documented way to wait for
+    // it -- and is exactly the trap noted in modules/settings/README.md.
+    readonly property var ids: {
+        const out = {};
+        for (const entry of DesktopEntries.applications.values)
+            out[entry.id] = entry;
+        return out;
+    }
+
+    IpcHandler {
+        target: "dock-pin-test"
+
+        function count(): int { return DesktopEntries.applications.values.length; }
+
+        function resolve(): string {
+            const pinned = DesktopPreferences.get("dockPinned");
+            const missing = [];
+            let first = null;
+            for (const id of pinned) {
+                const entry = DesktopEntries.byId(id);
+                if (!entry) missing.push(id);
+                if (first === null)
+                    first = { id: id, found: !!entry, name: entry ? entry.name : "", icon: entry ? entry.icon : "" };
+            }
+            return JSON.stringify({ total: pinned.length, first: first, missing: missing });
+        }
+    }
+}

config/dot/quickshell/modules/osd/Osd.qml

@@ -0,0 +1,177 @@
+// Compact, click-through system feedback. Repeated hardware-key presses update
+// this one surface in place, avoiding a stack of notification cards.
+
+import Quickshell
+import Quickshell.Wayland
+import QtQuick
+import qs.config
+import qs.services
+import qs.widgets
+
+PanelWindow {
+    id: root
+
+    property var modelData: null
+    readonly property var presentation: OsdState.state
+    readonly property bool belongsHere: !OsdState.monitorName || !root.modelData
+        || root.modelData.name === OsdState.monitorName
+    readonly property bool requestedVisible: OsdState.active && root.belongsHere
+    readonly property int horizontalPadding: 18
+    readonly property int contentGap: 14
+    readonly property int progressWidth: 156
+    readonly property int progressLabelWidth: 48
+    readonly property int messageWidth: Math.min(300, Math.max(52, Math.ceil(labelMetrics.advanceWidth)))
+    readonly property int desiredWidth: root.horizontalPadding * 2 + 24 + root.contentGap
+        + (root.presentation.progress
+            ? root.progressWidth + root.contentGap + root.progressLabelWidth
+            : root.messageWidth)
+
+    screen: root.modelData
+    anchors.bottom: true
+    margins.bottom: Theme.dockIconSize + Theme.dockPadding * 2 + Theme.barGap * 3
+    exclusiveZone: 0
+    exclusionMode: ExclusionMode.Ignore
+    implicitWidth: root.desiredWidth
+    implicitHeight: 64
+    color: "transparent"
+    mask: Region {}
+
+    WlrLayershell.namespace: "qs-popover-osd"
+    WlrLayershell.layer: WlrLayer.Overlay
+    WlrLayershell.keyboardFocus: WlrKeyboardFocus.None
+
+    property bool mapped: false
+    visible: root.mapped
+
+    onRequestedVisibleChanged: {
+        if (root.requestedVisible) {
+            unmapTimer.stop();
+            root.mapped = true;
+            entrance.restart();
+        } else if (root.mapped) {
+            unmapTimer.restart();
+        }
+    }
+
+    Component.onCompleted: {
+        if (root.requestedVisible)
+            root.mapped = true;
+    }
+
+    Timer {
+        id: unmapTimer
+        interval: Theme.durNormal
+        onTriggered: root.mapped = false
+    }
+
+    Rectangle {
+        id: surface
+        anchors.fill: parent
+        radius: Theme.popoverRadius
+        color: Theme.alpha(Theme.bgPopover, 0.9)
+        border.width: 1
+        border.color: Theme.alpha(Theme.fg, 0.1)
+        opacity: root.requestedVisible ? 1 : 0
+
+        Behavior on opacity {
+            NumberAnimation { duration: Theme.durNormal; easing.type: Easing.OutCubic }
+        }
+
+        transform: Translate {
+            id: slide
+            y: root.requestedVisible ? 0 : 8
+            Behavior on y {
+                NumberAnimation { duration: Theme.durNormal; easing.type: Easing.OutCubic }
+            }
+        }
+
+        PrismEdge {
+            anchors.top: parent.top
+            anchors.topMargin: 1
+            anchors.left: parent.left
+            anchors.right: parent.right
+            inset: parent.radius
+        }
+
+        Row {
+            anchors.centerIn: parent
+            spacing: root.contentGap
+
+            ThemedIcon {
+                anchors.verticalCenter: parent.verticalCenter
+                size: 24
+                icon: root.presentation.icon
+                iconFallback: "dialog-information-symbolic"
+                tint: Theme.fg
+            }
+
+            Item {
+                visible: root.presentation.progress
+                anchors.verticalCenter: parent.verticalCenter
+                width: visible ? root.progressWidth : 0
+                height: 8
+
+                Rectangle {
+                    anchors.fill: parent
+                    radius: height / 2
+                    color: Theme.alpha(Theme.fg, 0.14)
+                }
+
+                Rectangle {
+                    anchors.left: parent.left
+                    anchors.top: parent.top
+                    anchors.bottom: parent.bottom
+                    width: parent.width * root.presentation.ratio
+                    radius: height / 2
+                    color: Theme.accent
+
+                    Behavior on width {
+                        NumberAnimation { duration: Theme.durFast; easing.type: Easing.OutCubic }
+                    }
+                }
+            }
+
+            Text {
+                anchors.verticalCenter: parent.verticalCenter
+                width: root.presentation.progress ? root.progressLabelWidth : root.messageWidth
+                text: root.presentation.label
+                color: Theme.fg
+                elide: Text.ElideRight
+                maximumLineCount: 1
+                horizontalAlignment: root.presentation.progress ? Text.AlignRight : Text.AlignLeft
+                font.family: Theme.fontFamily
+                font.features: Theme.tabularFigures
+                font.pixelSize: Theme.fontSize
+                font.weight: Font.DemiBold
+            }
+        }
+    }
+
+    TextMetrics {
+        id: labelMetrics
+        font.family: Theme.fontFamily
+        font.pixelSize: Theme.fontSize
+        font.weight: Font.DemiBold
+        text: root.presentation.label
+    }
+
+    ParallelAnimation {
+        id: entrance
+        NumberAnimation {
+            target: surface
+            property: "opacity"
+            from: 0
+            to: 1
+            duration: Theme.durNormal
+            easing.type: Easing.OutCubic
+        }
+        NumberAnimation {
+            target: slide
+            property: "y"
+            from: 8
+            to: 0
+            duration: Theme.durNormal
+            easing.type: Easing.OutCubic
+        }
+    }
+}

config/dot/quickshell/modules/osd/OsdModel.js

@@ -0,0 +1,87 @@
+function clamp(value, minimum, maximum) {
+    return Math.max(minimum, Math.min(maximum, value));
+}
+
+function finiteNumber(value, fallback) {
+    var parsed = Number(value);
+    return isFinite(parsed) ? parsed : fallback;
+}
+
+function iconFor(kind, ratio) {
+    var name = String(kind || "").toLowerCase();
+    if (name === "volume-muted")
+        return "audio-volume-muted-symbolic";
+    if (name === "volume") {
+        if (ratio <= 0)
+            return "audio-volume-muted-symbolic";
+        if (ratio < 0.34)
+            return "audio-volume-low-symbolic";
+        if (ratio < 0.67)
+            return "audio-volume-medium-symbolic";
+        return "audio-volume-high-symbolic";
+    }
+    if (name === "microphone-muted")
+        return "microphone-sensitivity-muted-symbolic";
+    if (name === "microphone")
+        return "audio-input-microphone-symbolic";
+    if (name === "brightness")
+        return "display-brightness-symbolic";
+    if (name === "media-play" || name === "media-playing")
+        return "media-playback-start-symbolic";
+    if (name === "media-pause" || name === "media-paused")
+        return "media-playback-pause-symbolic";
+    if (name === "media-next")
+        return "media-skip-forward-symbolic";
+    if (name === "media-previous")
+        return "media-skip-backward-symbolic";
+    if (name === "media-stop")
+        return "media-playback-stop-symbolic";
+    return name || "dialog-information-symbolic";
+}
+
+function normalizedDuration(value) {
+    var parsed = finiteNumber(value, 1400);
+    return Math.max(0, Math.round(parsed));
+}
+
+function progressState(kind, rawValue, rawMaximum, rawLabel, rawDuration) {
+    var maximum = Math.max(1, finiteNumber(rawMaximum, 100));
+    var value = clamp(finiteNumber(rawValue, 0), 0, maximum);
+    var ratio = value / maximum;
+    var label = String(rawLabel || "");
+    if (!label)
+        label = Math.round(ratio * 100) + "%";
+
+    return {
+        kind: String(kind || ""),
+        value: value,
+        maximum: maximum,
+        ratio: ratio,
+        label: label,
+        icon: iconFor(kind, ratio),
+        duration: normalizedDuration(rawDuration),
+        progress: true
+    };
+}
+
+function messageState(kind, rawLabel, rawDuration) {
+    return {
+        kind: String(kind || ""),
+        value: 0,
+        maximum: 100,
+        ratio: 0,
+        label: String(rawLabel || ""),
+        icon: iconFor(kind, 0),
+        duration: normalizedDuration(rawDuration),
+        progress: false
+    };
+}
+
+if (typeof module !== "undefined") {
+    module.exports = {
+        clamp: clamp,
+        iconFor: iconFor,
+        progressState: progressState,
+        messageState: messageState
+    };
+}

config/dot/quickshell/modules/osd/qmldir

@@ -0,0 +1,2 @@
+module qs.modules.osd
+Osd 1.0 Osd.qml

config/dot/quickshell/modules/quicksettings/AudioDeviceList.qml

@@ -6,6 +6,7 @@ import QtQuick
 import Quickshell
 import Quickshell.Services.Pipewire
 import qs.config
+import qs.services
 
 Item {
     id: root
@@ -16,23 +17,12 @@ Item {
 
     implicitHeight: list.implicitHeight
 
-    readonly property var nodes: {
+    readonly property var nodes: root.output ? AudioDevices.outputs : AudioDevices.inputs
-        return Pipewire.nodes.values.filter(n => {
-            if (n.isStream)
-                return false;
-            // Sources have to be filtered on the type flags: !isSink also
-            // matches video nodes (webcams show up here otherwise).
-            return root.output ? n.isSink : (n.type & PwNodeType.AudioSource) === PwNodeType.AudioSource;
-        });
-    }
 
-    readonly property var current: root.output ? Pipewire.defaultAudioSink : Pipewire.defaultAudioSource
+    readonly property var current: AudioDevices.current(root.output)
 
     function select(node): void {
-        if (root.output)
+        AudioDevices.select(root.output, node)
-            Pipewire.preferredDefaultAudioSink = node;
-        else
-            Pipewire.preferredDefaultAudioSource = node;
     }
 
     ScrollColumn {
@@ -52,7 +42,7 @@ Item {
                 implicitHeight: 38
                 icon: root.output ? "audio-speakers-symbolic" : "audio-input-microphone-symbolic"
                 iconFallback: "audio-card-symbolic"
-                label: nodeRow.modelData.description || nodeRow.modelData.nickname || nodeRow.modelData.name
+                label: AudioDevices.label(nodeRow.modelData)
                 selected: nodeRow.modelData === root.current
                 onClicked: root.select(nodeRow.modelData)
             }

config/dot/quickshell/modules/quicksettings/BrightnessControl.qml

@@ -1,24 +1,44 @@
-// Backlight slider, via brightnessctl.
+// Brightness, from whichever source this machine actually has.
 //
-// This machine drives an external DisplayPort monitor and has no backlight
+// Two exist and they are not interchangeable:
-// class device at all (brightnessctl only reports keyboard/NIC LEDs), so the
+//
-// row removes itself rather than sitting there as a dead control. Probed once
+//   The kernel backlight class, driven by brightnessctl. Laptop panels have it;
-// at startup — backlight devices do not appear and disappear.
+//   this desktop does not -- brightnessctl reports only keyboard and NIC LEDs.
+//
+//   DDC/CI, the channel the buttons on a monitor's bezel drive. That is the
+//   only brightness an external display has, and it is per-monitor.
+//
+// A machine may have neither, either, or both, so this renders a row per source
+// found and removes itself entirely when there are none, rather than sitting
+// there as a dead control.
+//
+// Connector labels appear only when there is more than one row. A single
+// slider needs no explanation of which screen it dims.
 
 import QtQuick
 import Quickshell
 import Quickshell.Io
 import qs.widgets
 import qs.config
+import qs.services
 
 Item {
     id: root
 
-    property bool available: false
+    property bool backlightAvailable: false
-    property real value: 0
+    property real backlightValue: 0
 
-    visible: root.available
+    readonly property int rowCount: (root.backlightAvailable ? 1 : 0) + Brightness.displays.length
-    implicitHeight: root.available ? 32 : 0
+    readonly property bool labelled: root.rowCount > 1
+
+    visible: root.rowCount > 0
+    implicitHeight: rows.implicitHeight
+
+    // Probing I2C takes on the order of a second, so it waits until the panel
+    // is actually on screen rather than running at shell startup. Monitors do
+    // not come and go, so once is enough.
+    onVisibleChanged: if (visible && !Brightness.scanned) Brightness.refresh()
+    Component.onCompleted: if (root.visible && !Brightness.scanned) Brightness.refresh()
 
     // `-m` is the machine-readable form: name,class,current,percent,max
     Process {
@@ -34,18 +54,85 @@ Item {
             const fields = line.split(",");
             if (fields.length < 5 || fields[1] !== "backlight")
                 continue;
-            root.available = true;
+            root.backlightAvailable = true;
-            root.value = parseInt(fields[3]) / 100;
+            root.backlightValue = parseInt(fields[3]) / 100;
             return;
         }
     }
 
-    function apply(v: real): void {
+    function applyBacklight(v: real): void {
-        root.value = v;
+        root.backlightValue = v;
         // Never go fully dark: a 0% backlight looks like a broken shell.
         Quickshell.execDetached(["brightnessctl", "-c", "backlight", "-q", "set", Math.max(1, Math.round(v * 100)) + "%"]);
     }
 
+    Column {
+        id: rows
+        anchors.left: parent.left
+        anchors.right: parent.right
+        spacing: 4
+
+        BrightnessRow {
+            width: rows.width
+            visible: root.backlightAvailable
+            label: "Built-in"
+            value: root.backlightValue
+            onMoved: v => root.applyBacklight(v)
+        }
+
+        Repeater {
+            model: Brightness.displays
+
+            BrightnessRow {
+                required property var modelData
+                width: rows.width
+                // Hyprland already knows what each output is called, so the
+                // name comes from there rather than from a second source that
+                // could disagree with the Displays page. The connector is the
+                // fallback, so a display is never an unlabelled slider.
+                label: Displays.monitorNamed(modelData.connector)?.description || modelData.connector
+                value: modelData.value / 100
+                onMoved: v => Brightness.set(modelData.bus, Math.round(v * 100))
+            }
+        }
+    }
+
+    component BrightnessRow: Item {
+        id: row
+
+        property string label: ""
+        property real value: 0
+        signal moved(real value)
+
+        implicitHeight: caption.height + control.height
+
+        Text {
+            id: caption
+            anchors.left: parent.left
+            anchors.right: parent.right
+            anchors.leftMargin: 6
+            anchors.rightMargin: 6
+            anchors.top: parent.top
+            visible: root.labelled
+            height: visible ? implicitHeight + 2 : 0
+            text: row.label
+            color: Theme.fgDim
+            font.family: Theme.fontFamily
+            font.pixelSize: Theme.fontSizeSmall
+            elide: Text.ElideRight
+        }
+
+        // The slider and its glyph share one strip so the two stay aligned
+        // whether or not a caption sits above them. Anchoring the glyph to
+        // both a caption and a centre line instead would conflict, and an
+        // anchor set to undefined is not released.
+        Item {
+            id: control
+            anchors.left: parent.left
+            anchors.right: parent.right
+            anchors.top: caption.bottom
+            height: 32
+
             // ValueSlider draws its own leading icon, but symbolic icons need
             // recolouring to be visible — see ThemedIcon.
             ThemedIcon {
@@ -63,7 +150,9 @@ Item {
                 anchors.right: parent.right
                 anchors.rightMargin: 32
                 anchors.verticalCenter: parent.verticalCenter
-        value: root.value
+                value: row.value
-        onMoved: v => root.apply(v)
+                onMoved: v => row.moved(v)
+            }
+        }
     }
 }

config/dot/quickshell/modules/settings/AppearancePage.qml

@@ -49,9 +49,18 @@ SettingsPage {
             : "Applied to every display. Panama looks in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds."
 
         WallpaperPicker {
+            id: wallpapers
             width: parent.width
         }
 
+        ActionRow {
+            visible: wallpapers.hidden > 0 || wallpapers.expanded
+            label: wallpapers.expanded ? "Showing every image" : wallpapers.hidden + " more available"
+            detail: "The grid is kept short so the rest of this page stays reachable"
+            action: wallpapers.expanded ? "Show fewer" : "Show all"
+            onTriggered: wallpapers.expanded = !wallpapers.expanded
+        }
+
         ActionRow {
             label: "Look for new images"
             detail: Wallpaper.scanning
@@ -64,6 +73,56 @@ SettingsPage {
         }
     }
 
+    SettingsCard {
+        title: "Colour scheme"
+        subtitle: ColorScheme.lastError !== ""
+            ? ColorScheme.lastError
+            : "Light is Tokyo Night Day, the official light variant — the same hues at a different lightness, so the blue-into-orchid signature survives the switch. Applications and window borders follow."
+
+        ChoiceRow { setting: "colorScheme"; divider: false }
+    }
+
+    SettingsCard {
+        title: "Typography"
+        subtitle: Fonts.lastError !== ""
+            ? Fonts.lastError
+            : "Every piece of text in the shell. Samples are drawn in the font they name."
+
+        SliderRow { setting: "interfaceFontSize" }
+
+        TextRow {
+            label: "Interface font"
+            detail: Fonts.interfaceMissing
+                ? "Not installed on this machine — fontconfig is substituting something else"
+                : "Used for all shell text"
+            value: Fonts.interfaceFont
+        }
+
+        FontPicker {
+            width: parent.width
+            families: Fonts.interfaceFonts
+            current: Fonts.interfaceFont
+            emptyText: Fonts.scanning ? "Reading installed fonts…" : "No interface fonts found"
+            onPicked: family => Fonts.setInterface(family)
+        }
+
+        TextRow {
+            label: "Icon font"
+            detail: Fonts.iconMissing
+                ? "Not installed — the shell's glyphs will not draw correctly"
+                : "Draws the shell's glyphs, so only Nerd Fonts are offered"
+            value: Fonts.iconFont
+        }
+
+        FontPicker {
+            width: parent.width
+            families: Fonts.iconFonts
+            current: Fonts.iconFont
+            emptyText: "No Nerd Fonts installed"
+            onPicked: family => Fonts.setIcon(family)
+        }
+    }
+
     SettingsCard {
         title: "Windows"
         subtitle: "Spacing and shape of tiled windows. Each change is applied to the compositor and confirmed before it is saved."
@@ -103,7 +162,24 @@ SettingsPage {
 
         ToggleRow { setting: "showCpu" }
         ToggleRow { setting: "showMemory" }
-        ToggleRow { setting: "showGpu"; divider: false }
+        ToggleRow { setting: "showGpu"; divider: GraphicsDevices.devices.length > 1 || GraphicsDevices.selectionMissing }
+
+        // Only worth asking when there is a choice to make.
+        ChoiceGrid {
+            visible: GraphicsDevices.devices.length > 1 || GraphicsDevices.selectionMissing
+            width: parent.width
+            label: "Graphics device"
+            detail: GraphicsDevices.selectionMissing
+                ? "The stored device is not present on this machine, so the graphics readout is hidden. Choose one below."
+                : "Which GPU the graphics readout measures."
+            options: GraphicsDevices.devices.map(device => ({
+                value: device.path,
+                label: GraphicsDevices.shortName(device.name)
+            }))
+            current: GraphicsDevices.selectedPath
+            divider: false
+            onPicked: value => GraphicsDevices.select(value)
+        }
     }
 
     SettingsCard {

config/dot/quickshell/modules/settings/AudioBalance.qml

@@ -0,0 +1,72 @@
+import QtQuick
+import Quickshell
+import Quickshell.Services.Pipewire
+import qs.config
+import qs.widgets
+
+SettingRow {
+    id: root
+
+    property var node: null
+
+    label: "Balance"
+    detail: "Adjust the left and right channels"
+    controlWidth: 270
+    visible: root.available
+    divider: false
+
+    PwObjectTracker {
+        objects: root.node ? [root.node] : []
+    }
+
+    function channelIndex(channel): int {
+        if (!root.node?.audio)
+            return -1;
+        const channels = root.node.audio.channels;
+        for (let index = 0; index < channels.length; index++) {
+            if (channels[index] === channel)
+                return index;
+        }
+        return -1;
+    }
+
+    readonly property int leftIndex: root.channelIndex(PwAudioChannel.FrontLeft)
+    readonly property int rightIndex: root.channelIndex(PwAudioChannel.FrontRight)
+    readonly property bool available: root.node?.audio
+        && root.leftIndex >= 0 && root.rightIndex >= 0
+        && root.node.audio.volumes.length > Math.max(root.leftIndex, root.rightIndex)
+
+    readonly property real position: {
+        if (!root.available)
+            return 0.5;
+        const left = root.node.audio.volumes[root.leftIndex];
+        const right = root.node.audio.volumes[root.rightIndex];
+        const level = Math.max(left, right);
+        if (level <= 0.001)
+            return 0.5;
+        return right >= left ? 0.5 + (1 - left / level) * 0.5
+                             : 0.5 - (1 - right / level) * 0.5;
+    }
+
+    function setBalance(value: real): void {
+        if (!root.available)
+            return;
+        const next = Array.from(root.node.audio.volumes);
+        const level = Math.max(next[root.leftIndex], next[root.rightIndex], 0.001);
+        if (value < 0.5) {
+            next[root.leftIndex] = level;
+            next[root.rightIndex] = level * value * 2;
+        } else {
+            next[root.leftIndex] = level * (1 - value) * 2;
+            next[root.rightIndex] = level;
+        }
+        root.node.audio.volumes = next;
+    }
+
+    ValueSlider {
+        anchors.fill: parent
+        value: root.position
+        icon: "audio-speakers-symbolic"
+        onMoved: value => root.setBalance(value)
+    }
+}

config/dot/quickshell/modules/settings/BluetoothPanel.qml

@@ -0,0 +1,95 @@
+// Bluetooth, at page size.
+//
+// Paired devices first, because reconnecting to something you already own is
+// what you are here for nine times out of ten; discovered devices follow.
+// Battery is shown where BlueZ reports it, which is the one thing people
+// routinely open a terminal for.
+
+import QtQuick
+import Quickshell
+import Quickshell.Bluetooth
+import qs.config
+import qs.services
+
+Column {
+    id: root
+
+    spacing: 0
+
+    function primaryAction(device: var): void {
+        if (device.connected) {
+            device.disconnect();
+            return;
+        }
+        if (device.paired) {
+            device.connect();
+            return;
+        }
+        device.pair();
+    }
+
+    function stateLabel(device: var): string {
+        if (device.pairing)
+            return "Pairing…";
+        if (device.connected)
+            return device.batteryAvailable
+                ? `Connected · ${Math.round(device.battery * 100)}% battery`
+                : "Connected";
+        if (device.paired)
+            return "Paired";
+        return device.address || "Not paired";
+    }
+
+    Repeater {
+        model: Connectivity.bluetoothDevices
+
+        SettingRow {
+            id: entry
+
+            required property var modelData
+            required property int index
+
+            width: parent.width
+            label: entry.modelData.name || entry.modelData.address || "Unknown device"
+            detail: root.stateLabel(entry.modelData)
+            divider: entry.index < Connectivity.bluetoothDevices.length - 1
+            controlWidth: 200
+            activatable: !entry.modelData.pairing
+            onActivated: root.primaryAction(entry.modelData)
+
+            Row {
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+                spacing: 7
+
+                SettingsButton {
+                    anchors.verticalCenter: parent.verticalCenter
+                    enabled: !entry.modelData.pairing
+                    text: entry.modelData.connected
+                        ? "Disconnect"
+                        : (entry.modelData.paired ? "Connect" : "Pair")
+                    onClicked: root.primaryAction(entry.modelData)
+                }
+
+                SettingsButton {
+                    anchors.verticalCenter: parent.verticalCenter
+                    visible: entry.modelData.paired
+                    text: "Forget"
+                    onClicked: entry.modelData.forget()
+                }
+            }
+        }
+    }
+
+    SettingRow {
+        width: parent.width
+        visible: Connectivity.bluetoothDevices.length === 0
+        label: !Connectivity.adapter
+            ? "No Bluetooth adapter"
+            : (Connectivity.adapter.enabled ? "Looking for devices…" : "Bluetooth is off")
+        detail: Connectivity.adapter && !Connectivity.adapter.enabled
+            ? "Turn it on above to discover devices"
+            : "Put the device into pairing mode to make it appear"
+        divider: false
+    }
+}

config/dot/quickshell/modules/settings/ConnectivityPage.qml

@@ -1,92 +1,124 @@
+// Network & Devices.
+//
+// Wi-Fi and Bluetooth are handled here rather than delegated. Everything goes
+// through Quickshell.Networking and Quickshell.Bluetooth -- NetworkManager and
+// BlueZ over DBus -- and nothing shells out to nmcli or bluetoothctl. That was
+// the founding requirement for this desktop: never having to drop to a terminal
+// to join a network.
+//
+// Scanning follows this page being on screen. Wi-Fi scanning and especially
+// Bluetooth discovery hold the radio, and doing either for a list nobody is
+// looking at is battery and airtime spent on nothing.
+
 import QtQuick
+import Quickshell
 import Quickshell.Networking
-import Quickshell.Bluetooth
 import qs.config
 import qs.services
-import qs.modules.quicksettings
 
 SettingsPage {
     id: root
 
     title: "Network & Devices"
-    lede: "Connect graphically—no terminal workflow required."
+    lede: Connectivity.activeNetwork
+        ? "Connected to " + Connectivity.activeNetwork.name
+        : "Wi-Fi, Bluetooth, and the things Fedora owns."
 
-    readonly property var wifiDevice: {
+    // Drive the scanners only while this page is the one being shown.
-        for (const device of Networking.devices.values) {
+    Component.onCompleted: Connectivity.active = true
-            if (device.type === DeviceType.Wifi)
+    Component.onDestruction: Connectivity.active = false
-                return device;
-        }
-        return null;
-    }
-    readonly property var bluetoothAdapter: Bluetooth.defaultAdapter
 
     SettingsCard {
-        title: "Wi‑Fi"
+        title: "Wired"
-        subtitle: Networking.wifiEnabled ? "Available networks" : "Wireless networking is off"
+        visible: Connectivity.wiredDevice !== null
+
+        TextRow {
+            label: "Ethernet"
+            detail: Connectivity.wiredDevice ? Connectivity.wiredDevice.name : ""
+            value: Connectivity.wiredDevice && Connectivity.wiredDevice.connected ? "Connected" : "Not connected"
+            divider: false
+        }
+    }
+
+    SettingsCard {
+        title: "Wi-Fi"
+        // A Wi-Fi switch reading "On" above the words "No Wi-Fi adapter" is a
+        // contradiction; with no radio the card simply does not belong.
+        visible: Connectivity.wifiDevice !== null
+        subtitle: "Networks are re-scanned while this page is open."
 
         SettingRow {
-            label: "Wi‑Fi"
+            label: "Wi-Fi"
-            detail: root.wifiDevice ? "Managed by NetworkManager" : "No wireless adapter found"
+            detail: Connectivity.wifiEnabled ? "On" : "Off"
             controlWidth: 48
+            divider: Connectivity.wifiEnabled
 
             SettingsToggle {
                 anchors.right: parent.right
                 anchors.verticalCenter: parent.verticalCenter
-                checked: Networking.wifiEnabled
+                checked: Connectivity.wifiEnabled
-                enabled: Networking.wifiHardwareEnabled
+                enabled: Connectivity.wifiAvailable
                 onToggled: value => Networking.wifiEnabled = value
             }
         }
 
-        WifiList {
+        WifiPanel {
             width: parent.width
-            device: root.wifiDevice
+            visible: Connectivity.wifiEnabled
-            active: true
-            maxHeight: 240
-        }
-
-        ActionRow {
-            label: "Advanced network settings"
-            detail: "VPN, wired profiles, DNS, and connection details"
-            divider: false
-            action: "Open panel"
-            onTriggered: SystemSettings.openGnomePanel("network")
         }
     }
 
     SettingsCard {
         title: "Bluetooth"
-        subtitle: root.bluetoothAdapter?.enabled ? "Nearby and paired devices" : "Bluetooth is off"
+        visible: Connectivity.adapter !== null
+        subtitle: "Discovery runs while this page is open."
 
         SettingRow {
             label: "Bluetooth"
-            detail: root.bluetoothAdapter ? "Pair and reconnect without leaving Settings" : "No Bluetooth adapter found"
+            detail: Connectivity.adapter
+                ? (Connectivity.adapter.enabled ? "On" : "Off")
+                : "Unavailable"
             controlWidth: 48
+            divider: !!(Connectivity.adapter && Connectivity.adapter.enabled)
 
             SettingsToggle {
                 anchors.right: parent.right
                 anchors.verticalCenter: parent.verticalCenter
-                checked: root.bluetoothAdapter?.enabled ?? false
+                checked: !!(Connectivity.adapter && Connectivity.adapter.enabled)
-                enabled: root.bluetoothAdapter !== null
+                enabled: Connectivity.adapter !== null
                 onToggled: value => {
-                    if (root.bluetoothAdapter)
+                    if (Connectivity.adapter)
-                        root.bluetoothAdapter.enabled = value;
+                        Connectivity.adapter.enabled = value;
                 }
             }
         }
 
-        BluetoothList {
+        BluetoothPanel {
             width: parent.width
-            active: true
+            visible: !!(Connectivity.adapter && Connectivity.adapter.enabled)
-            maxHeight: 220
         }
+    }
+
+    SettingsCard {
+        title: "Owned by Fedora"
+        subtitle: "VPNs, per-connection routing, printers, and online accounts are configured by GNOME's panels, which are installed and searchable."
 
         ActionRow {
-            label: "Advanced Bluetooth settings"
+            label: "Network connections"
-            detail: "Device details and system-level options"
+            detail: "VPN, proxies, and per-connection settings"
+            action: "Open"
+            onTriggered: SystemSettings.openGnomePanel("network")
+        }
+        ActionRow {
+            label: "Printers"
+            action: "Open"
+            onTriggered: SystemSettings.openGnomePanel("printers")
+        }
+        ActionRow {
+            label: "Online accounts"
+            action: "Open"
             divider: false
-            action: "Open panel"
+            onTriggered: SystemSettings.openGnomePanel("online-accounts")
-            onTriggered: SystemSettings.openGnomePanel("bluetooth")
         }
     }
 }

config/dot/quickshell/modules/settings/DesktopPreview.qml

@@ -50,10 +50,13 @@ Rectangle {
 
     // Stands in for the wallpaper. Static: an animated gradient here would
     // repaint forever behind a settings page.
+    // Follows the colour scheme. A preview that stays dark while the shell
+    // around it is light does not read as "your desktop" -- it reads as a
+    // screenshot of someone else's.
     gradient: Gradient {
         orientation: Gradient.Vertical
-        GradientStop { position: 0.0; color: "#2b3050" }
+        GradientStop { position: 0.0; color: Theme.dark ? "#2b3050" : "#b9c0dd" }
-        GradientStop { position: 1.0; color: "#241f33" }
+        GradientStop { position: 1.0; color: Theme.dark ? "#241f33" : "#cbbcd4" }
     }
 
     // The bar, so the preview reads as this desktop and not a generic one.
@@ -203,7 +206,7 @@ Rectangle {
             shadowEnabled: true
             shadowColor: win.focused && root.glowOn
                 ? Theme.alpha(Theme.accent, 0.5)
-                : Theme.alpha("#15161e", 0.85)
+                : Theme.alpha(Theme.dark ? "#15161e" : "#6172b0", Theme.dark ? 0.85 : 0.45)
             shadowBlur: win.focused && root.glowOn
                 ? Math.min(1.0, root.px(root.glowRange) / 12)
                 : Math.min(1.0, root.px(root.shadowRange) / 24)

config/dot/quickshell/modules/settings/DisplaysPage.qml

@@ -1,7 +1,7 @@
 // Displays.
 //
-// Resolution, refresh rate, scale, and rotation, plus the gaming display
+// Resolution, refresh rate, scale, and rotation, plus panel brightness and the
-// policy that was already here.
+// gaming display policy that was already here.
 //
 // Every geometry change goes through an apply-then-confirm countdown. This is
 // the one page where a wrong value can leave the screen unreadable or blank,
@@ -32,7 +32,14 @@ SettingsPage {
             root.selectedOutput = Displays.monitors.length > 0 ? Displays.monitors[0].name : "";
     }
 
-    Component.onCompleted: root.syncSelectedOutput()
+    // Probing I2C for DDC-capable monitors takes on the order of a second, so
+    // it runs when this page is opened rather than at shell startup. Monitors
+    // do not appear while you are looking at a settings page, so once is enough.
+    Component.onCompleted: {
+        root.syncSelectedOutput();
+        if (!Brightness.scanned)
+            Brightness.refresh();
+    }
     Connections {
         target: Displays
         function onMonitorsChanged(): void { root.syncSelectedOutput(); }
@@ -187,6 +194,58 @@ SettingsPage {
         }
     }
 
+    SettingsCard {
+        title: "Night Light"
+        subtitle: NightLight.active
+            ? "On now, warming the display to reduce blue light."
+            : "Warms the display in the evening to reduce blue light."
+
+        ToggleRow { setting: "nightLightEnabled" }
+        ToggleRow { setting: "nightLightAutomatic" }
+        TimeOfDayRow { setting: "nightLightFrom" }
+        TimeOfDayRow { setting: "nightLightTo" }
+        SliderRow { setting: "nightLightTemperature"; divider: false }
+    }
+
+    // Panel brightness, over DDC/CI.
+    //
+    // This is hardware state rather than a stored preference: the monitor
+    // remembers it, the bezel buttons change it behind Panama's back, and
+    // writing it into settings.json would mean restoring a value the panel had
+    // already moved on from. So there is no schema key here and no SliderRow --
+    // the rows read and write the display directly.
+    SettingsCard {
+        visible: Brightness.available || Brightness.lastError !== ""
+        title: "Brightness"
+        subtitle: Brightness.available
+            ? "Sent to the monitor over DDC/CI, the same channel its buttons use."
+            : Brightness.lastError
+
+        Repeater {
+            model: Brightness.displays
+
+            SettingRow {
+                id: brightnessRow
+                required property var modelData
+                required property int index
+
+                label: Displays.monitorNamed(modelData.connector)?.description || modelData.connector
+                detail: modelData.connector ? modelData.connector + " · " + modelData.value + "%"
+                                            : modelData.value + "%"
+                divider: brightnessRow.index < Brightness.displays.length - 1
+                controlWidth: 190
+
+                ValueSlider {
+                    anchors.verticalCenter: parent.verticalCenter
+                    anchors.right: parent.right
+                    width: parent.width
+                    value: brightnessRow.modelData.value / 100
+                    onMoved: v => Brightness.set(brightnessRow.modelData.bus, Math.round(v * 100))
+                }
+            }
+        }
+    }
+
     SettingsCard {
         title: "Gaming display policy"
         subtitle: "Applied immediately and restored when Panama starts."

config/dot/quickshell/modules/settings/FontPicker.qml

@@ -0,0 +1,80 @@
+// Choosing a font family.
+//
+// Each candidate is rendered IN the font it names. A list of family names set
+// in the current font tells you nothing about what you are choosing, and the
+// whole point of picking a typeface is seeing it.
+
+import QtQuick
+import qs.config
+import qs.modules.clipboard
+
+Column {
+    id: root
+
+    spacing: 0
+
+    property var families: []
+    property string current: ""
+    property string emptyText: "No fonts found"
+
+    signal picked(string family)
+
+    // Filtered rather than listing all 139: a scrolling wall of family names
+    // inside a page that is already scrolling is worse than a search box.
+    readonly property var matches: {
+        const needle = filter.text.trim().toLowerCase();
+        const list = root.families.filter(family =>
+            needle === "" ? true : family.toLowerCase().indexOf(needle) >= 0);
+        // Always show what is currently selected, even when it does not match.
+        if (needle === "" && list.indexOf(root.current) >= 0)
+            return [root.current].concat(list.filter(f => f !== root.current)).slice(0, 12);
+        return list.slice(0, 12);
+    }
+
+    SearchField {
+        id: filter
+        width: parent.width
+        placeholder: "Search installed fonts"
+    }
+
+    Repeater {
+        model: root.matches
+
+        SettingRow {
+            id: candidate
+
+            required property var modelData
+            required property int index
+
+            readonly property bool selected: candidate.modelData === root.current
+
+            label: candidate.modelData
+            detail: candidate.selected ? "Currently in use" : ""
+            controlWidth: 210
+            divider: candidate.index < root.matches.length - 1
+            activatable: !candidate.selected
+            onActivated: root.picked(candidate.modelData)
+
+            Text {
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+                width: 200
+                horizontalAlignment: Text.AlignRight
+                elide: Text.ElideRight
+                // The sample is drawn in the candidate family, which is the
+                // entire reason this is a list rather than a text field.
+                text: "Handgloves 0123"
+                font.family: candidate.modelData
+                font.pixelSize: Theme.fontSize + 1
+                color: candidate.selected ? Theme.accent : Theme.fgDim
+            }
+        }
+    }
+
+    SettingRow {
+        width: parent.width
+        visible: root.matches.length === 0
+        label: root.emptyText
+        divider: false
+    }
+}

config/dot/quickshell/modules/settings/HomeFavoriteCard.qml

@@ -9,93 +9,61 @@ Rectangle {
     required property string sourceName
     required property int index
     required property bool featured
+    required property bool canMoveEarlier
+    required property bool canMoveLater
 
     signal aliasCommitted(string id, string alias)
     signal removeRequested(string id)
     signal moveRequested(string id, int targetIndex)
 
-    readonly property bool dragging: dragHandler.active
-
     implicitHeight: 108
     radius: Theme.cardRadius
-    color: root.dragging
+    color: Theme.alpha(Theme.bgDark, 0.7)
-        ? Theme.mix(Theme.bgDark, Theme.accent, 0.09)
+    border.width: 1
-        : Theme.alpha(Theme.bgDark, 0.7)
+    border.color: Theme.alpha(Theme.fg, 0.07)
-    border.width: root.dragging ? 2 : 1
-    border.color: root.dragging
-        ? Theme.alpha(Theme.accent, 0.82)
-        : Theme.alpha(Theme.fg, 0.07)
-    z: root.dragging ? 10 : 0
-
-    transform: Translate {
-        x: root.dragging ? dragHandler.translation.x : 0
-        y: root.dragging ? dragHandler.translation.y : 0
-    }
 
     PrismEdge {
         anchors.top: parent.top
         anchors.left: parent.left
         anchors.right: parent.right
         inset: root.radius
-        opacity: root.dragging ? 0.82 : 0.2
+        opacity: 0.2
     }
 
-    Rectangle {
+    Column {
-        id: dragHandle
+        id: reorderControls
         anchors.left: parent.left
-        anchors.leftMargin: 11
+        anchors.leftMargin: 8
         anchors.verticalCenter: parent.verticalCenter
         width: 30
-        height: 42
+        spacing: 4
-        radius: 9
-        activeFocusOnTab: true
-        color: root.dragging || activeFocus
-            ? Theme.alpha(Theme.accent, 0.14)
-            : (handleMouse.containsMouse ? Theme.alpha(Theme.fg, 0.09) : Theme.alpha(Theme.fg, 0.045))
-        border.width: activeFocus ? 2 : 1
-        border.color: activeFocus ? Theme.accent : Theme.alpha(Theme.fg, 0.06)
 
-        Text {
+        SettingsButton {
-            anchors.centerIn: parent
+            width: 30
-            text: "⠿"
+            height: 29
-            color: root.dragging ? Theme.accent : Theme.fgDim
+            text: "↑"
-            font.family: Theme.fontFamily
+            enabled: root.canMoveEarlier
-            font.pixelSize: 16
+            activeFocusOnTab: enabled
+            onClicked: root.moveRequested(root.favorite.id, root.index - 1)
+            Keys.onReturnPressed: if (enabled) root.moveRequested(root.favorite.id, root.index - 1)
+            Keys.onSpacePressed: if (enabled) root.moveRequested(root.favorite.id, root.index - 1)
         }
 
-        MouseArea {
+        SettingsButton {
-            id: handleMouse
+            width: 30
-            anchors.fill: parent
+            height: 29
-            hoverEnabled: true
+            text: "↓"
-            acceptedButtons: Qt.NoButton
+            enabled: root.canMoveLater
-            cursorShape: Qt.SizeAllCursor
+            activeFocusOnTab: enabled
-        }
+            onClicked: root.moveRequested(root.favorite.id, root.index + 1)
-
+            Keys.onReturnPressed: if (enabled) root.moveRequested(root.favorite.id, root.index + 1)
-        DragHandler {
+            Keys.onSpacePressed: if (enabled) root.moveRequested(root.favorite.id, root.index + 1)
-            id: dragHandler
-            target: null
-            onActiveChanged: {
-                if (!active)
-                    root.commitDrag();
-            }
-        }
-
-        Keys.onPressed: event => {
-            if (event.key === Qt.Key_Left || event.key === Qt.Key_Up) {
-                root.moveRequested(root.favorite.id, Math.max(0, root.index - 1));
-                event.accepted = true;
-            } else if (event.key === Qt.Key_Right || event.key === Qt.Key_Down) {
-                const grid = root.GridView.view;
-                const lastIndex = grid ? grid.count - 1 : root.index;
-                root.moveRequested(root.favorite.id, Math.min(lastIndex, root.index + 1));
-                event.accepted = true;
-            }
         }
     }
 
     Rectangle {
         id: aliasFrame
-        anchors.left: dragHandle.right
+        anchors.left: reorderControls.right
         anchors.leftMargin: 10
         anchors.right: removeButton.left
         anchors.rightMargin: 12
@@ -188,16 +156,4 @@ Rectangle {
         Keys.onReturnPressed: root.removeRequested(root.favorite.id)
         Keys.onSpacePressed: root.removeRequested(root.favorite.id)
     }
-
-    function commitDrag(): void {
-        const grid = root.GridView.view;
-        if (!grid || grid.count <= 0)
-            return;
-        const centerX = root.x + dragHandler.translation.x + root.width / 2;
-        const centerY = root.y + dragHandler.translation.y + root.height / 2;
-        const modelCount = grid.count;
-        const column = Math.max(0, Math.min(1, Math.floor(centerX / grid.cellWidth)));
-        const row = Math.max(0, Math.floor(centerY / grid.cellHeight));
-        root.moveRequested(root.favorite.id, Math.min(modelCount - 1, row * 2 + column));
-    }
 }

config/dot/quickshell/modules/settings/HomePage.qml

@@ -103,6 +103,16 @@ SettingsPage {
     SettingsCard {
         title: "Weather"
         subtitle: "Local conditions in the date menu"
+        TextRow {
+            label: "Location"
+            detail: "Only the search term is sent; the name below is a label kept on this machine"
+            value: Settings.weatherLocation
+        }
+
+        LocationPicker {
+            width: parent.width
+        }
+
         ChoiceRow { setting: "temperatureUnit" }
         SliderRow { setting: "weatherRefreshMinutes"; divider: false }
     }

config/dot/quickshell/modules/settings/HomePhonePage.qml

@@ -43,10 +43,200 @@ SettingsPage {
         return "Home Assistant is unavailable";
     }
 
+    function saveHomeAssistantConfig(): void {
+        HomeAssistantConfig.save(
+            homeUrlInput.text,
+            homeEntitiesInput.text,
+            homeTokenInput.text
+        );
+    }
+
+    Connections {
+        target: HomeAssistantConfig
+
+        function onConfigurationSaved(): void {
+            homeTokenInput.clear();
+            homeUrlInput.text = HomeAssistantConfig.url;
+            homeEntitiesInput.text = HomeAssistantConfig.entities.join(", ");
+        }
+    }
+
     SettingsCard {
         title: "Home Assistant"
         subtitle: root.homeStatus()
 
+        SettingRow {
+            label: "Connection"
+            detail: HomeAssistantConfig.tokenConfigured
+                ? "A long-lived access token is stored privately"
+                : "Paste a long-lived access token to connect"
+            value: HomeAssistantConfig.configured ? "Configured" : "Not configured"
+        }
+
+        SettingRow {
+            label: "Server URL"
+            detail: "The local or remote address of Home Assistant"
+            controlWidth: 330
+
+            Rectangle {
+                anchors.fill: parent
+                radius: Theme.pillRadius
+                color: Theme.alpha(Theme.fg, 0.07)
+                border.width: homeUrlInput.activeFocus ? 2 : 1
+                border.color: homeUrlInput.activeFocus
+                    ? Theme.alpha(Theme.accent, 0.55) : "transparent"
+
+                TextInput {
+                    id: homeUrlInput
+                    anchors.fill: parent
+                    anchors.leftMargin: 12
+                    anchors.rightMargin: 12
+                    activeFocusOnTab: true
+                    text: HomeAssistantConfig.url
+                    color: Theme.fg
+                    selectionColor: Theme.alpha(Theme.accent, 0.5)
+                    selectedTextColor: Theme.fg
+                    font.family: Theme.fontFamily
+                    font.pixelSize: Theme.fontSize
+                    verticalAlignment: TextInput.AlignVCenter
+                    clip: true
+
+                    Text {
+                        anchors.fill: parent
+                        visible: homeUrlInput.text === ""
+                        text: "https://homeassistant.local:8123"
+                        color: Theme.fgMuted
+                        font: homeUrlInput.font
+                        verticalAlignment: Text.AlignVCenter
+                        elide: Text.ElideRight
+                    }
+                }
+            }
+        }
+
+        SettingRow {
+            label: "Access token"
+            detail: HomeAssistantConfig.tokenConfigured
+                ? "Stored · leave blank to keep it"
+                : "Create one in your Home Assistant profile"
+            controlWidth: 330
+
+            PasswordField {
+                id: homeTokenInput
+                anchors.fill: parent
+                placeholder: HomeAssistantConfig.tokenConfigured
+                    ? "Stored token" : "Long-lived access token"
+                onAccepted: root.saveHomeAssistantConfig()
+            }
+        }
+
+        Column {
+            width: parent.width
+            spacing: 7
+            topPadding: 10
+            bottomPadding: 12
+
+            Text {
+                width: parent.width
+                text: "Light entities"
+                color: Theme.fg
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSize
+                font.weight: Font.Medium
+            }
+
+            Text {
+                width: parent.width
+                text: "Comma-separated entity IDs. These define the discoverable light catalog."
+                color: Theme.fgDim
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSizeSmall
+                wrapMode: Text.WordWrap
+            }
+
+            Rectangle {
+                width: parent.width
+                height: 72
+                radius: 10
+                color: Theme.alpha(Theme.fg, 0.055)
+                border.width: homeEntitiesInput.activeFocus ? 2 : 1
+                border.color: homeEntitiesInput.activeFocus
+                    ? Theme.alpha(Theme.accent, 0.55) : Theme.alpha(Theme.fg, 0.06)
+
+                TextEdit {
+                    id: homeEntitiesInput
+                    anchors.fill: parent
+                    anchors.margins: 10
+                    activeFocusOnTab: true
+                    text: HomeAssistantConfig.entities.join(", ")
+                    color: Theme.fg
+                    selectionColor: Theme.alpha(Theme.accent, 0.5)
+                    selectedTextColor: Theme.fg
+                    font.family: Theme.fontMono
+                    font.pixelSize: Theme.fontSizeSmall
+                    wrapMode: TextEdit.Wrap
+                    clip: true
+
+                    Text {
+                        anchors.fill: parent
+                        visible: homeEntitiesInput.text === ""
+                        text: "light.living_room, light.kitchen"
+                        color: Theme.fgMuted
+                        font: homeEntitiesInput.font
+                        wrapMode: Text.WordWrap
+                    }
+                }
+            }
+        }
+
+        Text {
+            width: parent.width
+            visible: HomeAssistantConfig.lastError !== ""
+            text: HomeAssistantConfig.lastError
+            color: Theme.danger
+            font.family: Theme.fontFamily
+            font.pixelSize: Theme.fontSizeSmall
+            wrapMode: Text.WordWrap
+            bottomPadding: 9
+        }
+
+        SettingRow {
+            label: "Private configuration"
+            detail: "Saved with owner-only permissions in Panama's private environment file"
+            controlWidth: 216
+
+            Row {
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+                spacing: 8
+
+                SettingsButton {
+                    id: clearTokenButton
+                    text: "Clear token"
+                    enabled: HomeAssistantConfig.tokenConfigured && !HomeAssistantConfig.busy
+                    activeFocusOnTab: enabled
+                    border.width: activeFocus ? 2 : 1
+                    border.color: activeFocus ? Theme.accent : Theme.alpha(Theme.fg, 0.08)
+                    onClicked: HomeAssistantConfig.clearToken()
+                    Keys.onReturnPressed: if (enabled) HomeAssistantConfig.clearToken()
+                    Keys.onSpacePressed: if (enabled) HomeAssistantConfig.clearToken()
+                }
+
+                SettingsButton {
+                    id: saveHomeConfigButton
+                    text: HomeAssistantConfig.busy ? "Saving…" : "Save"
+                    tone: "accent"
+                    enabled: !HomeAssistantConfig.busy
+                    activeFocusOnTab: enabled
+                    border.width: activeFocus ? 2 : 0
+                    border.color: activeFocus ? Theme.fg : "transparent"
+                    onClicked: root.saveHomeAssistantConfig()
+                    Keys.onReturnPressed: if (enabled) root.saveHomeAssistantConfig()
+                    Keys.onSpacePressed: if (enabled) root.saveHomeAssistantConfig()
+                }
+            }
+        }
+
         SettingRow {
             label: "Light catalog"
             detail: "Panama reads light state through the Home Assistant helper."
@@ -122,6 +312,8 @@ SettingsPage {
                 })
                 sourceName: modelData.sourceName
                 featured: index < 4
+                canMoveEarlier: index > 0
+                canMoveLater: index < favoritesGrid.count - 1
                 onAliasCommitted: (id, alias) => HomePreferences.setAlias(id, alias)
                 onMoveRequested: (id, targetIndex) => HomePreferences.move(id, targetIndex)
                 onRemoveRequested: id => HomePreferences.remove(id)

config/dot/quickshell/modules/settings/LocationPicker.qml

@@ -0,0 +1,53 @@
+// Choosing where the weather reading is for.
+//
+// A search box rather than latitude and longitude fields: nobody knows their
+// own coordinates, and a control that demands them is one nobody ever uses. The
+// coordinates are what actually get stored -- the name is only a label.
+
+import QtQuick
+import qs.config
+import qs.services
+import qs.modules.clipboard
+
+Column {
+    id: root
+
+    spacing: 0
+
+    SearchField {
+        id: query
+        width: parent.width
+        placeholder: "Search for a town or city"
+        onTextChanged: Geocoding.search(query.text)
+    }
+
+    Repeater {
+        model: Geocoding.results
+
+        SettingRow {
+            id: place
+
+            required property var modelData
+            required property int index
+
+            label: place.modelData.name
+            detail: [place.modelData.admin, place.modelData.country].filter(part => !!part).join(", ")
+            value: place.modelData.latitude.toFixed(2) + ", " + place.modelData.longitude.toFixed(2)
+            controlWidth: 150
+            divider: place.index < Geocoding.results.length - 1
+            activatable: true
+            onActivated: {
+                if (Geocoding.choose(place.modelData))
+                    query.text = "";
+            }
+        }
+    }
+
+    SettingRow {
+        width: parent.width
+        visible: Geocoding.searching || Geocoding.lastError !== ""
+        label: Geocoding.searching ? "Searching…" : "No result"
+        detail: Geocoding.searching ? "" : Geocoding.lastError
+        divider: false
+    }
+}

config/dot/quickshell/modules/settings/NotificationsPage.qml

@@ -50,10 +50,89 @@ SettingsPage {
         SliderRow { setting: "maxVisibleToasts"; divider: false }
     }
 
+    SettingsCard {
+        title: "Application rules"
+        subtitle: "Apps appear here after they send a notification."
+
+        TextRow {
+            visible: Notifs.applications.length === 0
+            label: "No applications remembered yet"
+            detail: "Application controls will appear after the first notification arrives."
+            divider: false
+        }
+
+        Repeater {
+            model: Notifs.applications
+
+            Column {
+                required property var modelData
+
+                readonly property var app: modelData
+
+                width: parent.width
+
+                SettingRow {
+                    label: app.name
+                    detail: app.id
+                    controlWidth: 48
+
+                    SettingsToggle {
+                        anchors.right: parent.right
+                        anchors.verticalCenter: parent.verticalCenter
+                        checked: Notifs.appRule(app.id).enabled
+                        onToggled: value => Notifs.setAppRule(app.id, { enabled: value })
+                    }
+                }
+
+                SettingRow {
+                    label: "Show on lock screen"
+                    detail: "Allow this app's notifications on the lock screen"
+                    controlWidth: 48
+
+                    SettingsToggle {
+                        anchors.right: parent.right
+                        anchors.verticalCenter: parent.verticalCenter
+                        checked: Notifs.appRule(app.id).showOnLockScreen
+                        onToggled: value => Notifs.setAppRule(app.id, { showOnLockScreen: value })
+                    }
+                }
+
+                SettingRow {
+                    label: "Show content on lock screen"
+                    detail: "Show message details when this app is visible there"
+                    divider: false
+                    controlWidth: 48
+
+                    SettingsToggle {
+                        anchors.right: parent.right
+                        anchors.verticalCenter: parent.verticalCenter
+                        checked: Notifs.appRule(app.id).showContentOnLockScreen
+                        onToggled: value => Notifs.setAppRule(app.id, { showContentOnLockScreen: value })
+                    }
+                }
+            }
+        }
+    }
+
     SettingsCard {
         title: "Focus sessions"
         subtitle: "A focus session binds quiet mode and Caffeine to the current workspace."
 
+        SettingRow {
+            label: "Keep the screen awake"
+            detail: Caffeine.enabled
+                ? "The display will not blank or lock while this is on"
+                : "Idle timings on Power & Lock apply normally"
+            controlWidth: 48
+
+            SettingsToggle {
+                anchors.right: parent.right
+                anchors.verticalCenter: parent.verticalCenter
+                checked: Caffeine.enabled
+                onToggled: value => Caffeine.enabled = value
+            }
+        }
+
         SettingRow {
             id: durationRow
 

config/dot/quickshell/modules/settings/PasswordField.qml

@@ -0,0 +1,106 @@
+// A password entry with a reveal toggle.
+//
+// Deliberately not the clipboard popover's SearchField with different text: a
+// Wi-Fi key typed into a field that echoes it is readable by anyone behind you,
+// and a search glyph in front of a password prompt is simply wrong. Masked by
+// default, revealable while held, because the reason people want to see it is
+// to check a character they just typed.
+
+import QtQuick
+import qs.config
+
+Rectangle {
+    id: root
+
+    property alias text: input.text
+    property string placeholder: "Password"
+    property bool revealed: false
+
+    signal accepted
+
+    implicitHeight: 32
+    radius: Theme.pillRadius
+    color: Theme.alpha(Theme.fg, 0.07)
+    // Not left at 0 so the focus ring has something to animate. See the note in
+    // modules/clipboard/SearchField.qml.
+    border.width: 1
+    border.color: input.activeFocus ? Theme.alpha(Theme.accent, 0.55) : "transparent"
+
+    Behavior on border.color {
+        ColorAnimation { duration: Theme.durFast }
+    }
+
+    function grab(): void {
+        input.forceActiveFocus();
+    }
+
+    function clear(): void {
+        input.text = "";
+        root.revealed = false;
+    }
+
+    TextInput {
+        id: input
+
+        anchors.left: parent.left
+        anchors.leftMargin: 13
+        anchors.right: revealButton.left
+        anchors.rightMargin: 8
+        anchors.verticalCenter: parent.verticalCenter
+
+        activeFocusOnTab: true
+        color: Theme.fg
+        selectionColor: Theme.alpha(Theme.accent, 0.5)
+        selectedTextColor: Theme.fg
+        font.family: Theme.fontFamily
+        font.pixelSize: Theme.fontSize
+        echoMode: root.revealed ? TextInput.Normal : TextInput.Password
+        passwordCharacter: "•"
+        clip: true
+
+        onAccepted: root.accepted()
+
+        Text {
+            anchors.fill: parent
+            verticalAlignment: Text.AlignVCenter
+            visible: input.text === ""
+            text: root.placeholder
+            color: Theme.fgMuted
+            font.family: Theme.fontFamily
+            font.pixelSize: Theme.fontSize
+            elide: Text.ElideRight
+        }
+    }
+
+    Rectangle {
+        id: revealButton
+
+        anchors.right: parent.right
+        anchors.rightMargin: 5
+        anchors.verticalCenter: parent.verticalCenter
+        width: 26
+        height: 24
+        radius: 7
+        color: revealHover.hovered ? Theme.alpha(Theme.fg, 0.12) : "transparent"
+        border.width: 0
+        visible: input.text !== ""
+
+        Text {
+            anchors.centerIn: parent
+            // Nerd Font eye / eye-slash. fontMono is used for icon glyphs only.
+            text: root.revealed ? "\u{F070}" : "\u{F06E}"
+            font.family: Theme.fontMono
+            font.pixelSize: 12
+            color: root.revealed ? Theme.accent : Theme.fgMuted
+        }
+
+        HoverHandler {
+            id: revealHover
+            cursorShape: Qt.PointingHandCursor
+        }
+
+        TapHandler {
+            onTapped: root.revealed = !root.revealed
+        }
+    }
+}

config/dot/quickshell/modules/settings/ShortcutsPage.qml

@@ -28,6 +28,11 @@ SettingsPage {
     SettingsCard {
         title: "Keyboard"
 
+        TextRow {
+            label: "Keyboard layout"
+            detail: "XKB layout name. Changing it needs a compositor reload, so it is shown here rather than offered as a control that appears to apply instantly."
+            value: Settings ? DesktopPreferences.get("keyboardLayout") : "us"
+        }
         SliderRow { setting: "keyRepeatDelay" }
         SliderRow { setting: "keyRepeatRate" }
         ToggleRow { setting: "numlockByDefault"; divider: false }

config/dot/quickshell/modules/settings/SoundDeviceList.qml

@@ -0,0 +1,40 @@
+import QtQuick
+import Quickshell.Services.Pipewire
+import qs.config
+import qs.services
+
+Column {
+    id: root
+
+    property bool output: true
+    readonly property var nodes: AudioDevices.nodes(root.output)
+    readonly property var current: AudioDevices.current(root.output)
+
+    width: parent ? parent.width : 620
+    spacing: 8
+
+    Repeater {
+        model: root.nodes
+
+        SoundDeviceRow {
+            required property var modelData
+
+            width: root.width
+            node: modelData
+            output: root.output
+            selected: modelData === root.current
+        }
+    }
+
+    Text {
+        width: parent.width
+        visible: root.nodes.length === 0
+        text: Pipewire.ready ? "No audio devices found" : "Discovering audio devices…"
+        color: Theme.fgDim
+        font.family: Theme.fontFamily
+        font.pixelSize: Theme.fontSize
+        horizontalAlignment: Text.AlignHCenter
+        topPadding: 18
+        bottomPadding: 18
+    }
+}

config/dot/quickshell/modules/settings/SoundDeviceRow.qml

@@ -0,0 +1,168 @@
+import QtQuick
+import Quickshell
+import Quickshell.Services.Pipewire
+import qs.config
+import qs.widgets
+import qs.services
+import qs.modules.quicksettings
+
+Rectangle {
+    id: root
+
+    required property var node
+    property bool output: true
+    property bool selected: false
+
+    implicitHeight: root.output || !root.selected ? 88 : 105
+    radius: Theme.cardRadius
+    color: root.selected ? Theme.alpha(Theme.accent, 0.09) : Theme.alpha(Theme.fg, 0.025)
+    border.width: 1
+    border.color: root.selected ? Theme.alpha(Theme.accent, 0.34) : Theme.alpha(Theme.fg, 0.07)
+
+    PwObjectTracker {
+        objects: root.node ? [root.node] : []
+    }
+
+    PwNodePeakMonitor {
+        id: inputPeak
+        node: root.node
+        enabled: !root.output && root.selected
+    }
+
+    readonly property real volume: root.node?.audio?.volume ?? 0
+    readonly property bool muted: root.node?.audio?.muted ?? false
+
+    function iconName(): string {
+        if (!root.output)
+            return root.muted ? "microphone-sensitivity-muted-symbolic" : "audio-input-microphone-symbolic";
+        if (root.muted || root.volume <= 0.001)
+            return "audio-volume-muted-symbolic";
+        if (root.volume < 0.34)
+            return "audio-volume-low-symbolic";
+        if (root.volume < 0.67)
+            return "audio-volume-medium-symbolic";
+        return "audio-volume-high-symbolic";
+    }
+
+    Row {
+        id: heading
+        anchors.left: parent.left
+        anchors.right: parent.right
+        anchors.top: parent.top
+        anchors.leftMargin: 12
+        anchors.rightMargin: 10
+        anchors.topMargin: 8
+        height: 28
+        spacing: 10
+
+        ThemedIcon {
+            anchors.verticalCenter: parent.verticalCenter
+            size: 20
+            icon: root.output ? "audio-speakers-symbolic" : "audio-input-microphone-symbolic"
+            iconFallback: "audio-card-symbolic"
+            tint: root.selected ? Theme.accent : Theme.fg
+        }
+
+        Column {
+            width: Math.max(0, parent.width - 20 - useButton.width - parent.spacing * 2)
+            anchors.verticalCenter: parent.verticalCenter
+            spacing: 1
+
+            Text {
+                width: parent.width
+                text: AudioDevices.label(root.node)
+                color: Theme.fg
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSize
+                font.weight: root.selected ? Font.DemiBold : Font.Medium
+                elide: Text.ElideRight
+            }
+
+            Text {
+                width: parent.width
+                visible: root.node.nickname && root.node.nickname !== AudioDevices.label(root.node)
+                text: root.node.nickname ?? ""
+                color: Theme.fgDim
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSizeSmall
+                elide: Text.ElideRight
+            }
+        }
+
+        SettingsButton {
+            id: useButton
+            anchors.verticalCenter: parent.verticalCenter
+            width: root.selected ? 78 : 64
+            text: root.selected ? "Default" : "Use"
+            enabled: !root.selected
+            onClicked: AudioDevices.select(root.output, root.node)
+        }
+    }
+
+    IconButton {
+        id: muteButton
+        anchors.left: parent.left
+        anchors.leftMargin: 8
+        anchors.top: heading.bottom
+        anchors.topMargin: 7
+        size: 30
+        iconSize: 17
+        icon: root.iconName()
+        iconFallback: root.output ? "audio-volume-high-symbolic" : "audio-input-microphone-symbolic"
+        onClicked: {
+            if (root.node?.audio)
+                root.node.audio.muted = !root.node.audio.muted;
+        }
+    }
+
+    ValueSlider {
+        id: volumeSlider
+        anchors.left: muteButton.right
+        anchors.leftMargin: 7
+        anchors.right: volumeText.left
+        anchors.rightMargin: 10
+        anchors.verticalCenter: muteButton.verticalCenter
+        value: root.muted ? 0 : root.volume
+        onMoved: value => {
+            if (!root.node?.audio)
+                return;
+            root.node.audio.muted = false;
+            root.node.audio.volume = value;
+        }
+    }
+
+    Text {
+        id: volumeText
+        anchors.right: parent.right
+        anchors.rightMargin: 12
+        anchors.verticalCenter: muteButton.verticalCenter
+        width: 38
+        text: Math.round(root.volume * 100) + "%"
+        color: Theme.fgDim
+        font.family: Theme.fontMono
+        font.features: Theme.tabularFigures
+        font.pixelSize: Theme.fontSizeSmall
+        horizontalAlignment: Text.AlignRight
+    }
+
+    Rectangle {
+        anchors.left: volumeSlider.left
+        anchors.right: volumeText.right
+        anchors.top: muteButton.bottom
+        anchors.topMargin: 5
+        height: 5
+        radius: height / 2
+        visible: !root.output && root.selected
+        color: Theme.alpha(Theme.fg, 0.10)
+
+        Rectangle {
+            anchors.left: parent.left
+            anchors.top: parent.top
+            anchors.bottom: parent.bottom
+            width: parent.width * Math.max(0, Math.min(1, inputPeak.peak))
+            radius: parent.radius
+            color: inputPeak.peak > 0.88 ? Theme.danger : Theme.accentSecondary
+
+        }
+    }
+}

config/dot/quickshell/modules/settings/SoundPage.qml

@@ -1,8 +1,6 @@
 import QtQuick
-import Quickshell.Services.Pipewire
 import qs.config
 import qs.services
-import qs.modules.quicksettings
 
 SettingsPage {
     title: "Sound"
@@ -10,43 +8,58 @@ SettingsPage {
 
     SettingsCard {
         title: "Output"
-        subtitle: Pipewire.defaultAudioSink?.description ?? "No output device"
+        subtitle: AudioDevices.current(true)?.description ?? "No output device"
 
-        AudioSlider {
+        SoundDeviceList {
-            width: parent.width
-            node: Pipewire.defaultAudioSink
-            output: true
-        }
-        Rectangle {
-            width: parent.width
-            height: 1
-            color: Theme.alpha(Theme.fg, 0.06)
-        }
-        AudioDeviceList {
             width: parent.width
             output: true
-            maxHeight: 190
+        }
+
+        AudioBalance {
+            width: parent.width
+            node: AudioDevices.current(true)
         }
     }
 
     SettingsCard {
         title: "Input"
-        subtitle: Pipewire.defaultAudioSource?.description ?? "No input device"
+        subtitle: AudioDevices.current(false)?.description ?? "No input device"
 
-        AudioSlider {
+        SoundDeviceList {
-            width: parent.width
-            node: Pipewire.defaultAudioSource
-            output: false
-        }
-        Rectangle {
-            width: parent.width
-            height: 1
-            color: Theme.alpha(Theme.fg, 0.06)
-        }
-        AudioDeviceList {
             width: parent.width
             output: false
-            maxHeight: 160
+        }
+    }
+
+    SettingsCard {
+        title: "Sound feedback"
+        subtitle: "Use the same event preferences as GTK and GNOME applications."
+
+        SettingRow {
+            label: "Event sounds"
+            detail: "Play alerts and interface event sounds"
+            controlWidth: 42
+
+            SettingsToggle {
+                anchors.fill: parent
+                checked: SoundFeedback.eventSounds
+                enabled: !SoundFeedback.busy
+                onToggled: checked => SoundFeedback.setEventSounds(checked)
+            }
+        }
+
+        SettingRow {
+            label: "Input feedback"
+            detail: "Play sounds for supported typing and input events"
+            controlWidth: 42
+            divider: false
+
+            SettingsToggle {
+                anchors.fill: parent
+                checked: SoundFeedback.inputFeedback
+                enabled: !SoundFeedback.busy
+                onToggled: checked => SoundFeedback.setInputFeedback(checked)
+            }
         }
     }
 

config/dot/quickshell/modules/settings/TimeOfDayRow.qml

@@ -0,0 +1,31 @@
+// A time of day, stored as a decimal hour.
+//
+// SliderRow would render 17.5 as "17.50", which is not how anyone reads a
+// clock. This is the same control with the readout formatted as a time, so the
+// night light schedule says "5:30 PM" rather than a number you have to convert.
+//
+// Honours the 24-hour clock preference, because a user who has asked for 18:30
+// everywhere else should not be shown 6:30 PM here.
+
+import QtQuick
+import qs.config
+import qs.services
+
+SliderRow {
+    id: root
+
+    // SliderRow renders `unit` after the number; a time needs the whole readout
+    // replaced, so the formatting is done here instead.
+    function display(value: real): string {
+        const hour = Math.floor(value);
+        const minute = Math.round((value - hour) * 60);
+        const padded = String(minute).padStart(2, "0");
+
+        if (Settings.use24Hour)
+            return `${String(hour).padStart(2, "0")}:${padded}`;
+
+        const suffix = hour < 12 ? "AM" : "PM";
+        const twelve = hour % 12 === 0 ? 12 : hour % 12;
+        return `${twelve}:${padded} ${suffix}`;
+    }
+}

config/dot/quickshell/modules/settings/WallpaperPicker.qml

@@ -19,6 +19,19 @@ Item {
 
     implicitHeight: grid.implicitHeight
 
+    // Sixty tiles is two screens of wallpaper on a page that also holds
+    // typography, window geometry and effects -- everything below it becomes
+    // unreachable without a long scroll past pictures. Two rows by default,
+    // all of them on request.
+    property bool expanded: false
+    readonly property int collapsedRows: 2
+
+    readonly property var shown: root.expanded
+        ? Wallpaper.available
+        : Wallpaper.available.slice(0, root.columns * root.collapsedRows)
+
+    readonly property int hidden: Wallpaper.available.length - root.shown.length
+
     readonly property int columns: Math.max(2, Math.floor(width / 190))
     readonly property real cellWidth: columns > 0 ? (width - (columns - 1) * 10) / columns : 160
 
@@ -30,7 +43,7 @@ Item {
         spacing: 10
 
         Repeater {
-            model: Wallpaper.available
+            model: root.shown
 
             Rectangle {
                 id: tile

config/dot/quickshell/modules/settings/WifiPanel.qml

@@ -0,0 +1,177 @@
+// Wi-Fi, at page size.
+//
+// The quick settings version is a popover: a compact list you glance at. This
+// is the one you sit in front of when a network is not behaving, so each row
+// carries what you would otherwise open a terminal to find out — signal,
+// security, and whether it is a network this machine already knows.
+//
+// Joining a secured network reveals an inline password field rather than
+// failing silently, which is the one interaction the popover already got right
+// and is worth keeping identical.
+
+import QtQuick
+import Quickshell
+import Quickshell.Networking
+import qs.config
+import qs.services
+import qs.widgets
+
+Column {
+    id: root
+
+    spacing: 0
+
+    // SSID whose password field is open, and the last failure.
+    property string passwordFor: ""
+    property string failedSsid: ""
+    property string failedText: ""
+
+    function activate(network: var): void {
+        root.failedSsid = "";
+        if (network.connected)
+            return;
+        if (network.known || !Connectivity.isSecured(network)) {
+            root.passwordFor = "";
+            network.connect();
+            return;
+        }
+        root.passwordFor = root.passwordFor === network.name ? "" : network.name;
+    }
+
+    Repeater {
+        model: Connectivity.networks
+
+        Column {
+            id: entry
+
+            required property var modelData
+            required property int index
+
+            width: parent.width
+
+            SettingRow {
+                width: parent.width
+
+                label: entry.modelData.name || "Hidden network"
+                detail: {
+                    const bits = [];
+                    if (entry.modelData.connected)
+                        bits.push("Connected");
+                    else if (entry.modelData.known)
+                        bits.push("Saved");
+                    bits.push(Connectivity.signalLabel(entry.modelData.signalStrength));
+                    bits.push(Connectivity.securityLabel(entry.modelData));
+                    return bits.join(" · ");
+                }
+                divider: entry.index < Connectivity.networks.length - 1 || root.passwordFor === entry.modelData.name
+                controlWidth: 190
+                activatable: !entry.modelData.connected
+                onActivated: root.activate(entry.modelData)
+
+                Row {
+                    anchors.right: parent.right
+                    anchors.verticalCenter: parent.verticalCenter
+                    spacing: 7
+
+                    Text {
+                        anchors.verticalCenter: parent.verticalCenter
+                        visible: entry.modelData.connected
+                        text: "Connected"
+                        color: Theme.accent
+                        font.family: Theme.fontFamily
+                        font.pixelSize: Theme.fontSize
+                        font.weight: Font.DemiBold
+                    }
+
+                    SettingsButton {
+                        anchors.verticalCenter: parent.verticalCenter
+                        visible: entry.modelData.connected
+                        text: "Disconnect"
+                        onClicked: entry.modelData.disconnect()
+                    }
+
+                    SettingsButton {
+                        anchors.verticalCenter: parent.verticalCenter
+                        visible: !entry.modelData.connected
+                        text: entry.modelData.known ? "Connect" : "Join"
+                        onClicked: root.activate(entry.modelData)
+                    }
+                }
+            }
+
+            // The password field for this network, when it is the one being
+            // joined. Inline rather than a dialog: a dialog over a tiled window
+            // is a worse place to type than the row you just clicked.
+            Item {
+                width: parent.width
+                height: root.passwordFor === entry.modelData.name ? 54 : 0
+                visible: height > 0
+                clip: true
+
+                onVisibleChanged: {
+                    if (visible)
+                        password.grab();
+                    else
+                        password.clear();
+                }
+
+                PasswordField {
+                    id: password
+                    anchors.left: parent.left
+                    anchors.right: joinButton.left
+                    anchors.rightMargin: 8
+                    anchors.verticalCenter: parent.verticalCenter
+                    placeholder: "Password for " + (entry.modelData.name || "network")
+                    onAccepted: joinButton.join()
+                }
+
+                SettingsButton {
+                    id: joinButton
+                    anchors.right: parent.right
+                    anchors.verticalCenter: parent.verticalCenter
+                    text: "Join"
+
+                    function join(): void {
+                        entry.modelData.connect(password.text);
+                        root.passwordFor = "";
+                        password.text = "";
+                    }
+
+                    onClicked: joinButton.join()
+                }
+            }
+
+            Text {
+                width: parent.width
+                visible: root.failedSsid === entry.modelData.name
+                leftPadding: 2
+                bottomPadding: 8
+                text: root.failedText
+                color: Theme.warn
+                font.family: Theme.fontFamily
+                font.pixelSize: Theme.fontSizeSmall
+            }
+
+            Connections {
+                target: entry.modelData
+                function onConnectionFailed(reason): void {
+                    root.failedSsid = entry.modelData.name;
+                    root.failedText = Connectivity.connectionFailureText(reason);
+                    root.passwordFor = entry.modelData.name;
+                }
+            }
+        }
+    }
+
+    SettingRow {
+        width: parent.width
+        visible: Connectivity.networks.length === 0
+        label: !Connectivity.wifiDevice
+            ? "No Wi-Fi adapter"
+            : (Connectivity.wifiEnabled ? "Looking for networks…" : "Wi-Fi is off")
+        detail: Connectivity.wifiDevice && !Connectivity.wifiEnabled
+            ? "Turn it on above to see what is nearby"
+            : ""
+        divider: false
+    }
+}

config/dot/quickshell/modules/settings/qmldir

@@ -37,3 +37,12 @@ DockAppPicker 1.0 DockAppPicker.qml
 ShortcutCapture 1.0 ShortcutCapture.qml
 ChoiceGrid 1.0 ChoiceGrid.qml
 DisplayModePicker 1.0 DisplayModePicker.qml
+WifiPanel 1.0 WifiPanel.qml
+BluetoothPanel 1.0 BluetoothPanel.qml
+PasswordField 1.0 PasswordField.qml
+AudioBalance 1.0 AudioBalance.qml
+SoundDeviceList 1.0 SoundDeviceList.qml
+SoundDeviceRow 1.0 SoundDeviceRow.qml
+TimeOfDayRow 1.0 TimeOfDayRow.qml
+LocationPicker 1.0 LocationPicker.qml
+FontPicker 1.0 FontPicker.qml

config/dot/quickshell/prism-gallery.qml

@@ -0,0 +1,375 @@
+// A living reference for Panama's shared visual language. This deliberately
+// renders the production widgets instead of lookalike mock components, so a
+// change to a control or Theme token is visible here immediately.
+
+import Quickshell
+import QtQuick
+import QtQuick.Layouts
+import qs.config
+import qs.widgets
+
+ShellRoot {
+    FloatingWindow {
+        id: galleryWindow
+
+        title: "Panama Prism Gallery"
+        visible: true
+        implicitWidth: 1120
+        implicitHeight: 760
+        minimumSize: Qt.size(920, 640)
+        color: Theme.bg
+
+        Rectangle {
+            anchors.fill: parent
+            color: Theme.bg
+
+            PrismEdge {
+                anchors.top: parent.top
+                anchors.left: parent.left
+                anchors.right: parent.right
+                inset: 0
+            }
+
+            RowLayout {
+                anchors.fill: parent
+                anchors.margins: 34
+                spacing: 34
+
+                // Quiet editorial rail: enough context to make screenshots
+                // self-explanatory without competing with the components.
+                ColumnLayout {
+                    Layout.preferredWidth: 222
+                    Layout.fillHeight: true
+                    spacing: 0
+
+                    Rectangle {
+                        Layout.preferredWidth: 38
+                        Layout.preferredHeight: 38
+                        radius: 12
+                        color: Theme.alpha(Theme.fg, 0.07)
+
+                        ThemedIcon {
+                            anchors.centerIn: parent
+                            size: 20
+                            icon: "applications-graphics-symbolic"
+                            tint: Theme.accent
+                        }
+                    }
+
+                    Text {
+                        Layout.topMargin: 20
+                        text: "PRISM"
+                        color: Theme.fg
+                        font.family: Theme.fontFamily
+                        font.pixelSize: 26
+                        font.weight: Font.DemiBold
+                        font.letterSpacing: 1.4
+                    }
+
+                    Text {
+                        Layout.topMargin: 5
+                        Layout.maximumWidth: 210
+                        text: "Panama's living interface reference. Calm by default, vivid with purpose."
+                        color: Theme.fgDim
+                        wrapMode: Text.WordWrap
+                        lineHeight: 1.25
+                        font.family: Theme.fontFamily
+                        font.pixelSize: Theme.fontSize
+                    }
+
+                    Item { Layout.preferredHeight: 36 }
+
+                    Repeater {
+                        model: [
+                            { label: "Tokyo Night Moon", color: Theme.bgHighlight },
+                            { label: "Signal blue", color: Theme.accent },
+                            { label: "Prism orchid", color: Theme.accentSecondary }
+                        ]
+
+                        RowLayout {
+                            required property var modelData
+                            Layout.topMargin: 10
+                            spacing: 10
+
+                            Rectangle {
+                                Layout.preferredWidth: 12
+                                Layout.preferredHeight: 12
+                                radius: 6
+                                color: modelData.color
+                            }
+
+                            Text {
+                                text: modelData.label
+                                color: Theme.fgDim
+                                font.family: Theme.fontFamily
+                                font.pixelSize: Theme.fontSizeSmall
+                            }
+                        }
+                    }
+
+                    Item { Layout.fillHeight: true }
+
+                    Text {
+                        text: "REAL COMPONENTS · LIVE TOKENS"
+                        color: Theme.fgMuted
+                        font.family: Theme.fontFamily
+                        font.pixelSize: 10
+                        font.weight: Font.DemiBold
+                        font.letterSpacing: 1.1
+                    }
+                }
+
+                Rectangle {
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    radius: Theme.popoverRadius
+                    color: Theme.alpha(Theme.bgPopover, Theme.popoverAlpha)
+                    border.width: 1
+                    border.color: Theme.alpha(Theme.fg, 0.08)
+
+                    PrismEdge {
+                        anchors.top: parent.top
+                        anchors.left: parent.left
+                        anchors.right: parent.right
+                        inset: parent.radius
+                    }
+
+                    Flickable {
+                        anchors.fill: parent
+                        anchors.margins: 30
+                        contentWidth: width
+                        contentHeight: content.implicitHeight
+                        clip: true
+                        boundsBehavior: Flickable.StopAtBounds
+
+                        ColumnLayout {
+                            id: content
+                            width: parent.width
+                            spacing: 28
+
+                            RowLayout {
+                                Layout.fillWidth: true
+
+                                ColumnLayout {
+                                    spacing: 4
+
+                                    Text {
+                                        text: "Interface inventory"
+                                        color: Theme.fg
+                                        font.family: Theme.fontFamily
+                                        font.pixelSize: Theme.fontSizeTitle
+                                        font.weight: Font.DemiBold
+                                    }
+
+                                    Text {
+                                        text: "Production controls in their canonical states"
+                                        color: Theme.fgDim
+                                        font.family: Theme.fontFamily
+                                        font.pixelSize: Theme.fontSize
+                                    }
+                                }
+
+                                Item { Layout.fillWidth: true }
+
+                                Pill {
+                                    interactive: false
+                                    horizontalPadding: 12
+
+                                    ThemedIcon {
+                                        size: 14
+                                        icon: "emblem-ok-symbolic"
+                                        tint: Theme.green
+                                    }
+
+                                    Text {
+                                        text: "TOKYO NIGHT MOON"
+                                        color: Theme.fgDim
+                                        font.family: Theme.fontFamily
+                                        font.pixelSize: 10
+                                        font.weight: Font.DemiBold
+                                        font.letterSpacing: 0.8
+                                    }
+                                }
+                            }
+
+                            ColumnLayout {
+                                Layout.fillWidth: true
+                                spacing: 12
+
+                                Text {
+                                    text: "QUICK CONTROLS"
+                                    color: Theme.fgMuted
+                                    font.family: Theme.fontFamily
+                                    font.pixelSize: 10
+                                    font.weight: Font.DemiBold
+                                    font.letterSpacing: 1.1
+                                }
+
+                                RowLayout {
+                                    Layout.fillWidth: true
+                                    spacing: 12
+
+                                    Toggle {
+                                        id: wifiToggle
+                                        Layout.fillWidth: true
+                                        icon: "network-wireless-signal-excellent-symbolic"
+                                        label: "Wi-Fi"
+                                        sublabel: active ? "Connected" : "Off"
+                                        active: true
+                                        onToggled: active = !active
+                                    }
+
+                                    Toggle {
+                                        id: bluetoothToggle
+                                        Layout.fillWidth: true
+                                        icon: "bluetooth-active-symbolic"
+                                        label: "Bluetooth"
+                                        sublabel: active ? "2 devices" : "Off"
+                                        active: false
+                                        onToggled: active = !active
+                                    }
+
+                                    Toggle {
+                                        id: focusToggle
+                                        Layout.fillWidth: true
+                                        icon: "weather-clear-night-symbolic"
+                                        label: "Focus"
+                                        sublabel: active ? "Until 5:30" : "Available"
+                                        active: false
+                                        onToggled: active = !active
+                                    }
+                                }
+                            }
+
+                            ColumnLayout {
+                                Layout.fillWidth: true
+                                spacing: 12
+
+                                Text {
+                                    text: "CONTINUOUS VALUES"
+                                    color: Theme.fgMuted
+                                    font.family: Theme.fontFamily
+                                    font.pixelSize: 10
+                                    font.weight: Font.DemiBold
+                                    font.letterSpacing: 1.1
+                                }
+
+                                Rectangle {
+                                    Layout.fillWidth: true
+                                    Layout.preferredHeight: 126
+                                    radius: Theme.cardRadius
+                                    color: Theme.alpha(Theme.fg, 0.045)
+
+                                    ColumnLayout {
+                                        anchors.fill: parent
+                                        anchors.margins: 18
+                                        spacing: 12
+
+                                        RowLayout {
+                                            Layout.fillWidth: true
+
+                                            Text {
+                                                text: "System audio"
+                                                color: Theme.fg
+                                                font.family: Theme.fontFamily
+                                                font.pixelSize: Theme.fontSize
+                                                font.weight: Font.Medium
+                                            }
+
+                                            Item { Layout.fillWidth: true }
+
+                                            Text {
+                                                text: Math.round(volumeSlider.value * 100) + "%"
+                                                color: Theme.fgDim
+                                                font.family: Theme.fontFamily
+                                                font.features: Theme.tabularFigures
+                                                font.pixelSize: Theme.fontSize
+                                            }
+                                        }
+
+                                        ValueSlider {
+                                            id: volumeSlider
+                                            Layout.fillWidth: true
+                                            value: 0.68
+                                            icon: "audio-volume-high-symbolic"
+                                            onMoved: newValue => volumeSlider.value = newValue
+                                        }
+                                    }
+                                }
+                            }
+
+                            ColumnLayout {
+                                Layout.fillWidth: true
+                                spacing: 12
+
+                                Text {
+                                    text: "BAR MATERIAL"
+                                    color: Theme.fgMuted
+                                    font.family: Theme.fontFamily
+                                    font.pixelSize: 10
+                                    font.weight: Font.DemiBold
+                                    font.letterSpacing: 1.1
+                                }
+
+                                Rectangle {
+                                    Layout.fillWidth: true
+                                    Layout.preferredHeight: 74
+                                    radius: Theme.cardRadius
+                                    color: Theme.alpha(Theme.bg, 0.62)
+
+                                    Row {
+                                        anchors.centerIn: parent
+                                        spacing: 8
+
+                                        Pill {
+                                            ThemedIcon {
+                                                size: 15
+                                                icon: "view-grid-symbolic"
+                                                tint: Theme.accent
+                                            }
+                                            Text {
+                                                text: "1  2  3"
+                                                color: Theme.fg
+                                                font.family: Theme.fontFamily
+                                                font.pixelSize: Theme.fontSizeSmall
+                                            }
+                                        }
+
+                                        Pill {
+                                            ThemedIcon {
+                                                size: 15
+                                                icon: "edit-copy-symbolic"
+                                                tint: Theme.fgDim
+                                            }
+                                            Text {
+                                                text: "Clipboard"
+                                                color: Theme.fg
+                                                font.family: Theme.fontFamily
+                                                font.pixelSize: Theme.fontSizeSmall
+                                            }
+                                        }
+
+                                        Pill {
+                                            ThemedIcon {
+                                                size: 15
+                                                icon: "appointment-soon-symbolic"
+                                                tint: Theme.fgDim
+                                            }
+                                            Text {
+                                                text: "Tue Aug 18  ·  4:46 AM"
+                                                color: Theme.fg
+                                                font.family: Theme.fontFamily
+                                                font.features: Theme.tabularFigures
+                                                font.pixelSize: Theme.fontSizeSmall
+                                            }
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+}

config/dot/quickshell/scripts/panama-action

@@ -0,0 +1,154 @@
+#!/usr/bin/env bash
+
+# One stable command boundary for launcher actions. Vicinae scripts stay tiny,
+# while the actual mapping to Quickshell IPC remains testable in one place.
+
+set -euo pipefail
+
+script_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+action="${1:-}"
+helper_dir="${PANAMA_ACTION_HELPER_DIR:-$script_dir}"
+confirm_attempts="${PANAMA_ACTION_CONFIRM_ATTEMPTS:-20}"
+confirm_delay="${PANAMA_ACTION_CONFIRM_DELAY:-0.1}"
+kill_command="${PANAMA_ACTION_KILL_COMMAND:-/usr/bin/kill}"
+
+osd_command=("$helper_dir/panama-osd")
+gallery_command=("$helper_dir/panama-prism-gallery")
+
+report_failure() {
+    local status=$?
+    trap - EXIT
+    if (( status != 0 )) && command -v notify-send >/dev/null 2>&1; then
+        notify-send -a Panama -i dialog-error-symbolic \
+            "Panama action failed" \
+            "The “${action//-/ }” action could not be completed." || true
+    fi
+    exit "$status"
+}
+trap report_failure EXIT
+
+show_state() {
+    local state="$1" on_icon="$2" off_icon="$3" label="$4"
+    case "$state" in
+        true) PANAMA_OSD_STRICT=1 "${osd_command[@]}" message "$on_icon" "$label On" ;;
+        false) PANAMA_OSD_STRICT=1 "${osd_command[@]}" message "$off_icon" "$label Off" ;;
+        *)
+            printf 'Panama action returned an invalid state: %s\n' "$state" >&2
+            return 1
+            ;;
+    esac
+}
+
+state_is_active() {
+    local target="$1"
+    case "$target" in
+        caffeine)
+            systemd-inhibit --list --no-pager --no-legend 2>/dev/null \
+                | awk '$1 == "Panama" && $(NF - 1) == "Caffeine" && $NF == "block" { found = 1 } END { exit !found }'
+            ;;
+        night-light)
+            pgrep -u "$(id -u)" -x hyprsunset >/dev/null 2>&1
+            ;;
+        *) return 2 ;;
+    esac
+}
+
+release_caffeine_inhibitors() {
+    local inhibitors pid uid
+    uid="$(id -u)"
+    inhibitors="$(systemd-inhibit --list --no-pager --no-legend 2>/dev/null \
+        | awk -v uid="$uid" '$1 == "Panama" && $2 == uid && $(NF - 1) == "Caffeine" && $NF == "block" { print $4 }')"
+    while IFS= read -r pid; do
+        [[ $pid =~ ^[0-9]+$ ]] || continue
+        "$kill_command" "$pid" 2>/dev/null || true
+    done <<<"$inhibitors"
+}
+
+wait_for_confirmed_state() {
+    local target="$1" expected="$2" attempt
+    for ((attempt = 0; attempt < confirm_attempts; attempt++)); do
+        if [[ $expected == true ]] && state_is_active "$target"; then
+            return 0
+        fi
+        if [[ $expected == false ]] && ! state_is_active "$target"; then
+            return 0
+        fi
+        sleep "$confirm_delay"
+    done
+    printf 'Panama action could not confirm %s reached state %s\n' "$target" "$expected" >&2
+    return 1
+}
+
+toggle_state() {
+    local target="$1" on_icon="$2" off_icon="$3" label="$4" state
+    state="$(qs ipc call "$target" toggle)"
+    case "$state" in true|false) ;; *) show_state "$state" "$on_icon" "$off_icon" "$label"; return ;; esac
+    if [[ $target == caffeine && $state == false ]]; then
+        release_caffeine_inhibitors
+    fi
+    wait_for_confirmed_state "$target" "$state"
+    show_state "$state" "$on_icon" "$off_icon" "$label"
+}
+
+wait_for_shell() {
+    local attempt
+    for ((attempt = 0; attempt < confirm_attempts; attempt++)); do
+        if qs ipc show >/dev/null 2>&1; then
+            return 0
+        fi
+        sleep "$confirm_delay"
+    done
+    printf 'Panama shell did not become ready after restart\n' >&2
+    return 1
+}
+
+case "$action" in
+    control-center) qs ipc call quicksettings open ;;
+    notifications) qs ipc call notifications open ;;
+    calendar) qs ipc call calendar-agenda open ;;
+    clipboard) qs ipc call clipboard open ;;
+    overview) qs ipc call overview open ;;
+    settings) qs ipc call settings open ;;
+
+    dnd)
+        state="$(qs ipc call notifications dnd)"
+        show_state "$state" notifications-disabled-symbolic notifications-symbolic "Do Not Disturb"
+        ;;
+    caffeine)
+        toggle_state caffeine weather-clear-symbolic weather-clear-night-symbolic Caffeine
+        ;;
+    night-light)
+        toggle_state night-light night-light-symbolic night-light-disabled-symbolic "Night Light"
+        ;;
+    focus-start)
+        state="$(qs ipc call focus start)"
+        [[ $state == true ]]
+        PANAMA_OSD_STRICT=1 "${osd_command[@]}" message preferences-system-time-symbolic "Focus Session Started"
+        ;;
+    focus-end)
+        state="$(qs ipc call focus end)"
+        if [[ $state == true ]]; then
+            PANAMA_OSD_STRICT=1 "${osd_command[@]}" message media-playback-stop-symbolic "Focus Session Ended"
+        else
+            PANAMA_OSD_STRICT=1 "${osd_command[@]}" message dialog-information-symbolic "No Focus Session Running"
+        fi
+        ;;
+
+    capture) qs ipc call capture open ;;
+    intelligence) qs ipc call screen-intelligence open ;;
+    screenshot) qs ipc call capture screenNow ;;
+    microphone) PANAMA_OSD_STRICT=1 "${osd_command[@]}" microphone toggle ;;
+
+    gallery) "${gallery_command[@]}" ;;
+    restart-shell)
+        qs kill >/dev/null 2>&1 || true
+        quickshell --daemonize
+        wait_for_shell
+        PANAMA_OSD_STRICT=1 "${osd_command[@]}" message view-refresh-symbolic "Panama Restarted"
+        ;;
+    *)
+        printf 'Usage: panama-action {%s}\n' \
+            'control-center|notifications|calendar|clipboard|overview|settings|dnd|caffeine|night-light|focus-start|focus-end|capture|intelligence|screenshot|microphone|gallery|restart-shell' >&2
+        exit 2
+        ;;
+esac

config/dot/quickshell/scripts/panama-brightness

@@ -0,0 +1,125 @@
+#!/usr/bin/env bash
+
+# External monitor brightness over DDC/CI.
+#
+# A desktop with no backlight class device has no brightness control at all --
+# brightnessctl only sees keyboard and NIC LEDs. The panel itself still has a
+# brightness setting, reachable over the monitor's DDC/CI channel (VCP feature
+# 0x10), which is what the buttons on the bezel drive.
+#
+# Usage:
+#   panama-brightness list            -> {"displays":[...],"error":""}
+#   panama-brightness get <bus>       -> integer percent
+#   panama-brightness set <bus> <pct> -> applies, prints nothing
+#
+# Displays are enumerated from sysfs rather than from `ddcutil detect`. The
+# kernel publishes the connector-to-I2C-bus mapping directly, as
+# /sys/class/drm/<card>-<connector>/ddc, along with whether anything is plugged
+# in. That is better than parsing detect output in three ways: the format is
+# stable where detect's brief output is undocumented, the connector name comes
+# out exactly as Hyprland and the Displays page already spell it (DP-2), and
+# only connectors with a monitor attached get probed -- one bus on this machine
+# instead of fourteen, which is the difference between a fast scan and a slow
+# one, since each probe of an empty bus waits for a timeout.
+#
+# No model name is reported. Hyprland already knows the human-readable
+# description of every output, so the UI joins on the connector name rather than
+# having two sources of truth for what a monitor is called.
+
+set -uo pipefail
+
+readonly VCP_BRIGHTNESS=0x10
+
+# Test seams. The contract needs to exercise enumeration and parsing on a
+# machine whose real monitors it must not touch, so both roots this script
+# reads are overridable. Nothing sets them in normal use.
+readonly DRM_ROOT="${PANAMA_BRIGHTNESS_DRM_ROOT:-/sys/class/drm}"
+readonly DEV_ROOT="${PANAMA_BRIGHTNESS_DEV_ROOT:-/dev}"
+
+emit_error() {
+    printf '{"displays":[],"error":%s}\n' "$(jq -Rn --arg e "$1" '$e')"
+    exit 0
+}
+
+command -v ddcutil >/dev/null 2>&1 || emit_error 'ddcutil is not installed'
+
+# Reading a VCP value needs read/write access to the monitor's I2C bus. The
+# udev rule ddcutil ships grants that to the seat user through uaccess, but only
+# to devices created after the rule was installed -- so a machine that installed
+# ddcutil without rebooting has the rule in place and no access to show for it.
+# That is by far the most likely reason for an empty list, and it is fixable in
+# one command, so say so rather than reporting "no displays".
+has_accessible_bus() {
+    local dev
+    for dev in "$DEV_ROOT"/i2c-*; do
+        [[ -r "$dev" && -w "$dev" ]] && return 0
+    done
+    return 1
+}
+
+cmd_list() {
+    has_accessible_bus || emit_error 'no I2C bus is accessible. ddcutil ships a udev rule that grants this, but only to devices created after it was installed. Run: sudo udevadm control --reload-rules && sudo udevadm trigger --subsystem-match=i2c-dev --subsystem-match=drm'
+
+    local rows=() connector bus value path
+    for path in "$DRM_ROOT"/card*-*; do
+        [[ -e "$path/ddc" ]] || continue
+        [[ "$(cat "$path/status" 2>/dev/null)" == "connected" ]] || continue
+
+        # card1-DP-2 -> DP-2, the name Hyprland uses.
+        connector="$(basename "$path")"
+        connector="${connector#card*-}"
+
+        bus="$(basename "$(readlink -f "$path/ddc")")"
+        bus="${bus#i2c-}"
+        [[ "$bus" =~ ^[0-9]+$ ]] || continue
+
+        # A monitor that does not implement 0x10 is not an error; it simply
+        # cannot be controlled, and is left out rather than shown as a slider
+        # that does nothing.
+        value="$(cmd_get "$bus")" || continue
+        [[ -n "$value" ]] || continue
+
+        rows+=("$(jq -cn \
+            --argjson bus "$bus" \
+            --arg connector "$connector" \
+            --argjson value "$value" \
+            '{bus: $bus, connector: $connector, value: $value}')")
+    done
+
+    if [[ ${#rows[@]} -eq 0 ]]; then
+        emit_error 'no connected monitor reports DDC/CI brightness. Some panels implement it only when "DDC/CI" is enabled in their on-screen menu.'
+    fi
+
+    printf '{"displays":[%s],"error":""}\n' "$(IFS=,; printf '%s' "${rows[*]}")"
+}
+
+# Prints the current brightness as a whole percent, or nothing when the display
+# cannot report it. `getvcp --brief` is documented as machine readable and
+# answers "VCP 10 C <current> <max>"; the max is almost always 100 but is not
+# guaranteed to be, so it is read rather than assumed.
+cmd_get() {
+    local bus="$1" out current max
+    out="$(timeout 10 ddcutil --bus "$bus" getvcp "$VCP_BRIGHTNESS" --brief 2>/dev/null)" || return 1
+    read -r _ _ _ current max <<<"$out"
+    [[ "$current" =~ ^[0-9]+$ && "$max" =~ ^[0-9]+$ && "$max" -gt 0 ]] || return 1
+    printf '%s' "$(( current * 100 / max ))"
+}
+
+cmd_set() {
+    local bus="$1" percent="$2" max out
+    [[ "$percent" =~ ^[0-9]+$ ]] || return 1
+    (( percent > 100 )) && percent=100
+
+    out="$(timeout 10 ddcutil --bus "$bus" getvcp "$VCP_BRIGHTNESS" --brief 2>/dev/null)" || return 1
+    read -r _ _ _ _ max <<<"$out"
+    [[ "$max" =~ ^[0-9]+$ && "$max" -gt 0 ]] || max=100
+
+    timeout 10 ddcutil --bus "$bus" setvcp "$VCP_BRIGHTNESS" "$(( percent * max / 100 ))" >/dev/null 2>&1
+}
+
+case "${1:-list}" in
+    list) cmd_list ;;
+    get)  cmd_get "${2:?bus required}" ;;
+    set)  cmd_set "${2:?bus required}" "${3:?percent required}" ;;
+    *)    printf 'usage: panama-brightness [list|get <bus>|set <bus> <percent>]\n' >&2; exit 2 ;;
+esac

config/dot/quickshell/scripts/panama-fonts

@@ -0,0 +1,56 @@
+#!/usr/bin/env bash
+
+# Lists installed font families, split by what they are usable for.
+#
+# Two separate questions get asked of fonts here, and they have different
+# answers:
+#
+#   interface   proportional families suitable for reading UI text
+#   monospace   fixed-pitch families
+#   icons       families carrying Nerd Font glyphs
+#
+# The icon distinction matters more than it looks. Theme.fontMono is used ONLY
+# to draw glyphs -- the workspace pills, the status cluster, the search icon --
+# and picking a monospace family without those glyphs replaces every icon in the
+# shell with tofu. So they are reported separately rather than lumped in with
+# monospace, and the picker can say so.
+#
+# fc-list reports one line per style, so families are deduplicated here. The
+# first comma-separated alias is the canonical name Qt will match.
+
+set -euo pipefail
+
+emit() {
+    # $1: fontconfig pattern, $2: json key
+    fc-list "$1" family 2>/dev/null \
+        | sed 's/,.*//' \
+        | sed 's/^[[:space:]]*//;s/[[:space:]]*$//' \
+        | grep -v '^$' \
+        | sort -u
+}
+
+json_array() {
+    local first=true
+    printf '['
+    while IFS= read -r line; do
+        [[ -n "$line" ]] || continue
+        [[ "$first" == true ]] || printf ','
+        first=false
+        printf '%s' "$(printf '%s' "$line" | jq -Rs 'rtrimstr("\n")')"
+    done
+    printf ']'
+}
+
+# spacing=100 is fontconfig's mono flag. Proportional is everything else.
+mono="$(emit ':spacing=100')"
+all="$(emit ':')"
+interface="$(comm -23 <(printf '%s\n' "$all") <(printf '%s\n' "$mono"))"
+icons="$(printf '%s\n' "$all" | grep -i 'nerd font' || true)"
+
+printf '{"interface":'
+printf '%s\n' "$interface" | json_array
+printf ',"monospace":'
+printf '%s\n' "$mono" | json_array
+printf ',"icons":'
+printf '%s\n' "$icons" | json_array
+printf '}\n'

config/dot/quickshell/scripts/panama-gpus

@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+
+# Enumerates GPUs that can report utilisation, with a readable name for each.
+#
+# Panama's vitals readout needs one specific sysfs file, and the card numbering
+# is neither stable across machines nor meaningful to a person: this box has
+# card1 and card2, both amdgpu, one discrete and one integrated. Picking a
+# number blindly shows whichever the kernel happened to enumerate first.
+#
+# Names come from lspci where available, because the sysfs device directory
+# exposes only numeric vendor/device ids.
+
+set -euo pipefail
+
+first=true
+printf '['
+
+for busy in /sys/class/drm/card*/device/gpu_busy_percent; do
+    [[ -r "$busy" ]] || continue
+
+    device_dir="$(dirname "$busy")"
+    card="$(basename "$(dirname "$device_dir")")"
+
+    # The device directory is a symlink into the PCI tree; its target's basename
+    # is the PCI address lspci wants.
+    pci="$(basename "$(readlink -f "$device_dir")" 2>/dev/null || true)"
+    name=""
+    if [[ -n "$pci" ]] && command -v lspci >/dev/null 2>&1; then
+        # Strip the leading domain: lspci -s wants 00:02.0, sysfs gives 0000:00:02.0
+        short="${pci#*:}"
+        name="$(lspci -s "$short" 2>/dev/null | sed -E 's/^[^ ]+ [^:]+: //' | head -1)"
+    fi
+    if [[ -z "$name" ]]; then
+        driver="$(sed -n 's/^DRIVER=//p' "$device_dir/uevent" 2>/dev/null | head -1)"
+        name="${driver:-Graphics} ($card)"
+    fi
+
+    reading="$(cat "$busy" 2>/dev/null || printf '')"
+    [[ "$reading" =~ ^[0-9]+$ ]] || reading=-1
+
+    [[ "$first" == true ]] || printf ','
+    first=false
+    printf '{"card":"%s","path":"%s","name":%s,"busy":%s}' \
+        "$card" "$busy" "$(printf '%s' "$name" | jq -Rs .)" "$reading"
+done
+
+printf ']\n'

config/dot/quickshell/scripts/panama-home-assistant

@@ -192,8 +192,17 @@ def resolve_config(
     env: Mapping[str, str] | None = None,
     legacy: Callable[[], Config] = load_legacy_config,
 ) -> Config:
+    # An explicitly supplied environment is the WHOLE environment. Reading the
+    # user's private env file underneath it makes callers -- tests especially --
+    # depend on whatever happens to be in that file: adding a real
+    # PANAMA_HOME_ASSISTANT_ENTITIES to it silently overrode a fixture that was
+    # asserting the legacy fallback. Production passes env=None and still gets
+    # the file.
+    if env is None:
         private_env = read_panama_env()
-    private_env.update(dict(os.environ if env is None else env))
+        private_env.update(dict(os.environ))
+    else:
+        private_env = dict(env)
 
     url_value = private_env.get("PANAMA_HOME_ASSISTANT_URL", "").strip()
     token_value = private_env.get("PANAMA_HOME_ASSISTANT_TOKEN", "").strip()

config/dot/quickshell/scripts/panama-home-assistant-config

@@ -0,0 +1,255 @@
+#!/usr/bin/env python3
+
+"""Read and atomically update Panama's private Home Assistant settings.
+
+Secret values are accepted only as a single JSON object on stdin and are never
+returned. The command line therefore remains safe to inspect with ps(1).
+"""
+
+from __future__ import annotations
+
+import fcntl
+import json
+import os
+import pathlib
+import re
+import shlex
+import sys
+import tempfile
+import urllib.parse
+from collections.abc import Mapping, Sequence
+from typing import Any
+
+
+KEY_URL = "PANAMA_HOME_ASSISTANT_URL"
+KEY_TOKEN = "PANAMA_HOME_ASSISTANT_TOKEN"
+KEY_ENTITIES = "PANAMA_HOME_ASSISTANT_ENTITIES"
+TARGET_KEYS = (KEY_URL, KEY_TOKEN, KEY_ENTITIES)
+ASSIGNMENT = re.compile(
+    r"^(?P<prefix>\s*(?:export\s+)?)(?P<key>[A-Za-z_][A-Za-z0-9_]*)\s*=(?P<value>.*)$"
+)
+ENTITY_ID = re.compile(r"^[a-z_]+\.[a-z0-9_]+$")
+DEFAULT_ENV = pathlib.Path(__file__).resolve().parents[3] / "bash/env"
+
+
+class ConfigError(RuntimeError):
+    """An error code safe to display without including submitted values."""
+
+
+def env_path() -> pathlib.Path:
+    override = os.environ.get("PANAMA_HOME_ASSISTANT_ENV_FILE", "")
+    return pathlib.Path(override) if override else DEFAULT_ENV
+
+
+def parse_assignment(raw: str) -> str | None:
+    try:
+        parsed = shlex.split(raw, comments=True, posix=True)
+    except ValueError:
+        return None
+    return parsed[0] if len(parsed) == 1 else None
+
+
+def read_values(path: pathlib.Path) -> dict[str, str]:
+    try:
+        lines = path.read_text(encoding="utf-8").splitlines()
+    except FileNotFoundError:
+        return {}
+    except OSError as error:
+        raise ConfigError("read-failed") from error
+
+    values: dict[str, str] = {}
+    for line in lines:
+        match = ASSIGNMENT.match(line)
+        if not match or match.group("key") not in TARGET_KEYS:
+            continue
+        value = parse_assignment(match.group("value"))
+        if value is not None:
+            values[match.group("key")] = value
+    return values
+
+
+def normalize_url(value: Any) -> str:
+    if not isinstance(value, str):
+        raise ConfigError("invalid-url")
+    normalized = value.strip().rstrip("/")
+    if not normalized:
+        return ""
+    parsed = urllib.parse.urlsplit(normalized)
+    if (
+        parsed.scheme not in {"http", "https"}
+        or not parsed.hostname
+        or parsed.username
+        or parsed.password
+    ):
+        raise ConfigError("invalid-url")
+    return normalized
+
+
+def normalize_token(value: Any) -> str:
+    if not isinstance(value, str) or "\x00" in value or "\n" in value or "\r" in value:
+        raise ConfigError("invalid-token")
+    return value.strip()
+
+
+def normalize_entities(value: Any) -> tuple[str, ...]:
+    if isinstance(value, str):
+        candidates: Sequence[Any] = re.split(r"[,\n]", value)
+    elif isinstance(value, list):
+        candidates = value
+    else:
+        raise ConfigError("invalid-entities")
+
+    entities: list[str] = []
+    for candidate in candidates:
+        if not isinstance(candidate, str):
+            raise ConfigError("invalid-entities")
+        entity_id = candidate.strip()
+        if not entity_id:
+            continue
+        if not ENTITY_ID.fullmatch(entity_id):
+            raise ConfigError("invalid-entities")
+        if entity_id not in entities:
+            entities.append(entity_id)
+    return tuple(entities)
+
+
+def public_state(values: Mapping[str, str]) -> dict[str, object]:
+    try:
+        url = normalize_url(values.get(KEY_URL, ""))
+        entities = list(normalize_entities(values.get(KEY_ENTITIES, "")))
+        error = ""
+    except ConfigError as config_error:
+        url = ""
+        entities = []
+        error = str(config_error)
+    token_configured = bool(values.get(KEY_TOKEN, "").strip())
+    return {
+        "ok": error == "",
+        "configured": bool(url and token_configured),
+        "tokenConfigured": token_configured,
+        "url": url,
+        "entities": entities,
+        "error": error,
+    }
+
+
+def render_updated(original: str, updates: Mapping[str, str]) -> str:
+    lines = original.splitlines(keepends=True)
+    rendered: list[str] = []
+    replaced: set[str] = set()
+
+    for line in lines:
+        content = line.rstrip("\r\n")
+        ending = line[len(content) :]
+        match = ASSIGNMENT.match(content)
+        key = match.group("key") if match else ""
+        if key not in updates:
+            rendered.append(line)
+            continue
+        if key in replaced:
+            continue
+        rendered.append(f"export {key}={shlex.quote(updates[key])}{ending or os.linesep}")
+        replaced.add(key)
+
+    if rendered and not rendered[-1].endswith(("\n", "\r")):
+        rendered[-1] += os.linesep
+    for key in TARGET_KEYS:
+        if key in updates and key not in replaced:
+            rendered.append(f"export {key}={shlex.quote(updates[key])}{os.linesep}")
+    return "".join(rendered)
+
+
+def atomic_write(path: pathlib.Path, text: str) -> None:
+    path.parent.mkdir(parents=True, exist_ok=True)
+    descriptor, temporary_name = tempfile.mkstemp(prefix=".env.", dir=path.parent)
+    temporary = pathlib.Path(temporary_name)
+    try:
+        os.fchmod(descriptor, 0o600)
+        with os.fdopen(descriptor, "w", encoding="utf-8") as stream:
+            stream.write(text)
+            stream.flush()
+            os.fsync(stream.fileno())
+        os.replace(temporary, path)
+        os.chmod(path, 0o600)
+        directory_fd = os.open(path.parent, os.O_RDONLY | os.O_DIRECTORY)
+        try:
+            os.fsync(directory_fd)
+        finally:
+            os.close(directory_fd)
+    finally:
+        try:
+            temporary.unlink()
+        except FileNotFoundError:
+            pass
+
+
+def read_payload() -> dict[str, Any]:
+    line = sys.stdin.buffer.readline(1_048_577)
+    if not line or len(line) > 1_048_576:
+        raise ConfigError("invalid-payload")
+    try:
+        payload = json.loads(line)
+    except (UnicodeDecodeError, json.JSONDecodeError) as error:
+        raise ConfigError("invalid-payload") from error
+    if not isinstance(payload, dict):
+        raise ConfigError("invalid-payload")
+    return payload
+
+
+def write_payload(path: pathlib.Path, payload: Mapping[str, Any]) -> dict[str, object]:
+    allowed = {"url", "token", "entities"}
+    if not set(payload).issubset(allowed) or not payload:
+        raise ConfigError("invalid-payload")
+
+    updates: dict[str, str] = {}
+    if "url" in payload:
+        updates[KEY_URL] = normalize_url(payload["url"])
+    if "token" in payload:
+        updates[KEY_TOKEN] = normalize_token(payload["token"])
+    if "entities" in payload:
+        updates[KEY_ENTITIES] = ",".join(normalize_entities(payload["entities"]))
+
+    lock_path = path.with_name("." + path.name + ".lock")
+    path.parent.mkdir(parents=True, exist_ok=True)
+    lock_fd = os.open(lock_path, os.O_CREAT | os.O_RDWR, 0o600)
+    try:
+        os.fchmod(lock_fd, 0o600)
+        fcntl.flock(lock_fd, fcntl.LOCK_EX)
+        try:
+            original = path.read_text(encoding="utf-8")
+        except FileNotFoundError:
+            original = ""
+        except OSError as error:
+            raise ConfigError("read-failed") from error
+        atomic_write(path, render_updated(original, updates))
+    finally:
+        os.close(lock_fd)
+
+    result = public_state(read_values(path))
+    result["ok"] = True
+    result["error"] = ""
+    return result
+
+
+def compact_json(value: Mapping[str, object]) -> str:
+    return json.dumps(value, separators=(",", ":"))
+
+
+def main() -> None:
+    command = sys.argv[1] if len(sys.argv) > 1 else "status"
+    if len(sys.argv) > 2 or command not in {"status", "write"}:
+        raise ConfigError("usage")
+    path = env_path()
+    result = public_state(read_values(path)) if command == "status" else write_payload(path, read_payload())
+    print(compact_json(result))
+
+
+if __name__ == "__main__":
+    try:
+        main()
+    except ConfigError as error:
+        print(compact_json({"ok": False, "error": str(error)}))
+        raise SystemExit(1) from error
+    except OSError:
+        print(compact_json({"ok": False, "error": "write-failed"}))
+        raise SystemExit(1)

config/dot/quickshell/scripts/panama-osd

@@ -0,0 +1,262 @@
+#!/bin/bash
+
+set -u
+
+readonly PANAMA_OSD_SCRIPT_DIR="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
+
+strict_delivery() {
+    [[ ${PANAMA_OSD_STRICT:-false} == true || ${PANAMA_OSD_STRICT:-false} == 1 ]]
+}
+
+show_progress() {
+    if ! qs ipc call osd progress "$1" "$2" 100 "$3" >/dev/null 2>&1; then
+        strict_delivery && return 1
+    fi
+    return 0
+}
+
+show_message() {
+    if ! qs ipc call osd message "$1" "$2" >/dev/null 2>&1; then
+        strict_delivery && return 1
+    fi
+    return 0
+}
+
+volume_state() {
+    local target="$1" output level percent muted=false
+    output="$(wpctl get-volume "$target" 2>/dev/null)" || return 1
+    if [[ $output =~ Volume:[[:space:]]*([0-9]+([.][0-9]+)?) ]]; then
+        level="${BASH_REMATCH[1]}"
+    else
+        return 1
+    fi
+    [[ $output == *"[MUTED]"* ]] && muted=true
+    percent="$(awk -v value="$level" 'BEGIN { printf "%d", value * 100 + 0.5 }')"
+    printf '%s %s\n' "$percent" "$muted"
+}
+
+show_volume() {
+    local target="$1" kind="$2" state percent muted label
+    state="$(volume_state "$target")" || return 0
+    read -r percent muted <<<"$state"
+    if [[ $muted == true ]]; then
+        show_progress "${kind}-muted" "$percent" "Muted"
+    else
+        label="${percent}%"
+        show_progress "$kind" "$percent" "$label"
+    fi
+}
+
+adjust_volume() {
+    local action="${1:-}" step="${2:-6}" target="@DEFAULT_AUDIO_SINK@"
+    case "$action" in
+        up) wpctl set-volume -l 1 "$target" "${step}%+" || return ;;
+        down) wpctl set-volume "$target" "${step}%-" || return ;;
+        toggle) wpctl set-mute "$target" toggle || return ;;
+        *) printf 'Usage: panama-osd volume up|down|toggle [step]\n' >&2; return 2 ;;
+    esac
+    show_volume "$target" volume
+}
+
+adjust_microphone() {
+    local action="${1:-}" step="${2:-6}" target="@DEFAULT_AUDIO_SOURCE@"
+    case "$action" in
+        up) wpctl set-volume -l 1 "$target" "${step}%+" || return ;;
+        down) wpctl set-volume "$target" "${step}%-" || return ;;
+        toggle) wpctl set-mute "$target" toggle || return ;;
+        *) printf 'Usage: panama-osd microphone up|down|toggle [step]\n' >&2; return 2 ;;
+    esac
+    show_volume "$target" microphone
+}
+
+brightness_percent() {
+    local output="$1" percent
+    percent="$(awk -F, 'NR == 1 { value=$5; gsub(/%/, "", value); print value }' <<<"$output")"
+    [[ $percent =~ ^[0-9]+$ ]] || return 1
+    printf '%s\n' "$percent"
+}
+
+brightness_error() {
+    local detail="$1" label="External brightness unavailable"
+    if [[ $detail == *udev* || $detail == *accessible* || $detail == *permission* ]]; then
+        label="Brightness needs permission"
+    fi
+
+    show_message dialog-warning-symbolic "$label" || true
+    if command -v notify-send >/dev/null 2>&1; then
+        notify-send --app-name=Panama --icon=display-brightness-symbolic \
+            "Brightness unavailable" "$detail" >/dev/null 2>&1 || true
+    fi
+}
+
+discover_ddc_bus() {
+    local helper="$1" cache_file="$2" list_json focused selected error bus connector
+
+    command -v jq >/dev/null 2>&1 || {
+        brightness_error "jq is required to discover DDC/CI displays."
+        return 1
+    }
+
+    list_json="$("$helper" list 2>/dev/null)" || {
+        brightness_error "The external brightness helper could not inspect connected displays."
+        return 1
+    }
+    if ! jq -e 'type == "object" and (.displays | type == "array")' >/dev/null 2>&1 <<<"$list_json"; then
+        brightness_error "The external brightness helper returned invalid display information."
+        return 1
+    fi
+
+    error="$(jq -r '.error // empty' <<<"$list_json")"
+    if [[ -n $error ]]; then
+        brightness_error "$error"
+        return 1
+    fi
+
+    focused="$(hyprctl -j monitors 2>/dev/null \
+        | jq -r '.[] | select(.focused == true) | .name' 2>/dev/null \
+        | head -n1)"
+    selected="$(jq -r --arg connector "$focused" '
+        ([.displays[] | select(.connector == $connector)][0] // .displays[0] // empty)
+        | [.bus, .connector]
+        | @tsv
+    ' <<<"$list_json")"
+    IFS=$'\t' read -r bus connector <<<"$selected"
+    if [[ ! $bus =~ ^[0-9]+$ ]]; then
+        brightness_error "No connected monitor exposes DDC/CI brightness control."
+        return 1
+    fi
+
+    umask 077
+    printf '%s\t%s\n' "$bus" "$connector" >"$cache_file"
+    printf '%s\n' "$bus"
+}
+
+adjust_ddc_brightness() {
+    local action="$1" step="$2"
+    local helper="${PANAMA_OSD_BRIGHTNESS_HELPER:-$PANAMA_OSD_SCRIPT_DIR/panama-brightness}"
+    local runtime_dir="${PANAMA_OSD_RUNTIME_DIR:-${XDG_RUNTIME_DIR:-/tmp}/panama-osd-${UID}}"
+    local cache_file="$runtime_dir/brightness-bus" lock_file="$runtime_dir/brightness.lock"
+    local bus="" connector="" current target lock_fd
+
+    [[ -x $helper ]] || {
+        brightness_error "The external brightness helper is not installed."
+        return 0
+    }
+    mkdir -p "$runtime_dir" || return 0
+    chmod 700 "$runtime_dir" 2>/dev/null || true
+
+    exec {lock_fd}>"$lock_file" || return 0
+    # DDC transactions on one I2C bus cannot safely overlap. A short wait also
+    # sheds an excessive key-repeat backlog instead of replaying it seconds later.
+    flock -w 2 "$lock_fd" || return 0
+
+    if [[ -r $cache_file ]]; then
+        IFS=$'\t' read -r bus connector <"$cache_file" || true
+        [[ $bus =~ ^[0-9]+$ ]] || bus=""
+    fi
+
+    if [[ -n $bus ]]; then
+        current="$("$helper" get "$bus" 2>/dev/null)" || current=""
+        if [[ ! $current =~ ^[0-9]+$ ]]; then
+            : >"$cache_file"
+            bus=""
+        fi
+    fi
+
+    if [[ -z $bus ]]; then
+        bus="$(discover_ddc_bus "$helper" "$cache_file")" || return 0
+        current="$("$helper" get "$bus" 2>/dev/null)" || current=""
+    fi
+    if [[ ! $current =~ ^[0-9]+$ ]]; then
+        brightness_error "The selected monitor stopped responding over DDC/CI."
+        return 0
+    fi
+
+    if [[ $action == up ]]; then
+        target=$(( current + step ))
+    else
+        target=$(( current - step ))
+    fi
+    (( target > 100 )) && target=100
+    (( target < 0 )) && target=0
+
+    if ! "$helper" set "$bus" "$target" >/dev/null 2>&1; then
+        brightness_error "The selected monitor did not accept the brightness change."
+        return 0
+    fi
+    show_progress brightness "$target" "${target}%"
+}
+
+adjust_brightness() {
+    local action="${1:-}" step="${2:-5}" output percent
+    [[ $step =~ ^[0-9]+$ ]] || {
+        printf 'Usage: panama-osd brightness up|down [step]\n' >&2
+        return 2
+    }
+    case "$action" in
+        up|down) ;;
+        *) printf 'Usage: panama-osd brightness up|down [step]\n' >&2; return 2 ;;
+    esac
+
+    # Laptop panels expose a kernel backlight class and remain the fastest,
+    # most reliable path. Desktops fall through to DDC/CI monitor control.
+    output="$(brightnessctl -m -c backlight 2>/dev/null)" || output=""
+    if percent="$(brightness_percent "$output")"; then
+        if [[ $action == up ]]; then
+            brightnessctl -e4 -n2 -c backlight set "${step}%+" >/dev/null || return 0
+        else
+            brightnessctl -e4 -n2 -c backlight set "${step}%-" >/dev/null || return 0
+        fi
+        output="$(brightnessctl -m -c backlight 2>/dev/null)" || return 0
+        percent="$(brightness_percent "$output")" || return 0
+        show_progress brightness "$percent" "${percent}%"
+        return
+    fi
+
+    adjust_ddc_brightness "$action" "$step"
+}
+
+media_action() {
+    local action="${1:-}" kind label fallback
+    case "$action" in
+        play-pause)
+            playerctl play-pause || return
+            if [[ $(playerctl status 2>/dev/null) == "Playing" ]]; then
+                kind="media-play"
+                fallback="Playing"
+            else
+                kind="media-pause"
+                fallback="Paused"
+            fi
+            ;;
+        next) playerctl next || return; kind="media-next"; fallback="Next track" ;;
+        previous) playerctl previous || return; kind="media-previous"; fallback="Previous track" ;;
+        stop) playerctl stop || return; kind="media-stop"; fallback="Stopped" ;;
+        *) printf 'Usage: panama-osd media play-pause|next|previous|stop\n' >&2; return 2 ;;
+    esac
+
+    label="$(playerctl metadata --format '{{ title }} — {{ artist }}' 2>/dev/null)"
+    [[ -n $label ]] || label="$fallback"
+    show_message "$kind" "$label"
+}
+
+case "${1:-}" in
+    volume) shift; adjust_volume "$@" ;;
+    microphone) shift; adjust_microphone "$@" ;;
+    brightness) shift; adjust_brightness "$@" ;;
+    media) shift; media_action "$@" ;;
+    message)
+        shift
+        kind="${1:-}"
+        [[ -n $kind && $# -ge 2 ]] || {
+            printf 'Usage: panama-osd message ICON LABEL\n' >&2
+            exit 2
+        }
+        shift
+        show_message "$kind" "$*"
+        ;;
+    *)
+        printf 'Usage: panama-osd volume|microphone|brightness|media|message ACTION [value]\n' >&2
+        exit 2
+        ;;
+esac

config/dot/quickshell/scripts/panama-prism-gallery

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+gallery="${XDG_CONFIG_HOME:-$HOME/.config}/quickshell/prism-gallery.qml"
+
+if qs -p "$gallery" ipc show >/dev/null 2>&1; then
+    qs -p "$gallery" kill
+else
+    qs -p "$gallery" --daemonize
+fi

config/dot/quickshell/scripts/panama-settings-backup

@@ -572,6 +572,28 @@ def command_restore(arguments: list[str]) -> None:
         home_present = False
         home_data = None
 
+    # Display geometry is never restored from a snapshot. Applying it requires
+    # the visible confirmation/recovery flow in Displays.qml; a settings-file
+    # restore followed by `hyprctl reload` must not bypass that safety boundary.
+    # Preserve the currently confirmed generation when it is readable, and
+    # otherwise remove the snapshot's geometry so startup uses shipped policy.
+    try:
+        current_desktop = read_json(SETTINGS, "The current settings file") \
+            if is_present(SETTINGS) else {}
+    except BackupError:
+        current_desktop = {}
+
+    if isinstance(current_desktop, dict) and "displays" in current_desktop:
+        # Even a Home-only snapshot must retain the confirmed monitor layout.
+        # In that case the restored desktop file contains only the protected
+        # geometry; every ordinary desktop preference remains absent/default.
+        desktop_present = True
+        desktop_data = dict(desktop_data) if desktop_data is not None else {}
+        desktop_data["displays"] = current_desktop["displays"]
+    elif desktop_present and desktop_data is not None:
+        desktop_data = dict(desktop_data)
+        desktop_data.pop("displays", None)
+
     # Restoring remains undoable, but a corrupt current file must not prevent a
     # known-good snapshot from recovering the desktop.
     save_snapshot(require_any=False, validate=False)

config/dot/quickshell/scripts/panama-theme-apps

@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+
+# Propagates the colour scheme to applications that do not read the desktop
+# portal.
+#
+# Most modern applications DO follow org.freedesktop.portal.Settings and need
+# nothing from us: GTK4/libadwaita, Qt6, Chromium and Electron all read
+# org.freedesktop.appearance color-scheme, which xdg-desktop-portal-gtk serves
+# from gsettings. Panama sets that, so those follow automatically.
+#
+# Terminals are the notable exception -- they predate the standard and carry
+# their own palettes. kitty is handled here.
+#
+#   panama-theme-apps dark|light
+#
+# kitty gets it twice: the generated include file so terminals opened later
+# start correct, and a live `set-colors` over its control socket so terminals
+# already open change now. Without the second, a scheme change appears to do
+# nothing until you open a new window.
+
+set -euo pipefail
+
+scheme="${1:-dark}"
+case "$scheme" in
+    dark|light) ;;
+    *) printf 'usage: panama-theme-apps [dark|light]\n' >&2; exit 2 ;;
+esac
+
+kitty_dir="${XDG_CONFIG_HOME:-$HOME/.config}/kitty"
+theme_file="$kitty_dir/themes/tokyonight-moon.conf"
+[[ "$scheme" == "light" ]] && theme_file="$kitty_dir/themes/tokyonight-day.conf"
+
+status_kitty="skipped"
+if [[ -r "$theme_file" ]]; then
+    # Written atomically: kitty may read this while a new window is starting.
+    if cp "$theme_file" "$kitty_dir/current-theme.conf.tmp" 2>/dev/null \
+        && mv "$kitty_dir/current-theme.conf.tmp" "$kitty_dir/current-theme.conf" 2>/dev/null; then
+        status_kitty="written"
+    fi
+
+    # Live-apply to running terminals. kitty appends its PID to the socket name
+    # from listen_on, so there is one socket per instance -- "unix:@mykitty"
+    # alone reaches nothing, which is exactly how this looked like remote
+    # control being disabled when it was not.
+    if command -v kitty >/dev/null 2>&1 && command -v ss >/dev/null 2>&1; then
+        applied=0
+        while read -r socket; do
+            [[ -n "$socket" ]] || continue
+            if kitty @ --to "unix:@${socket#@}" set-colors --all --configured "$theme_file" >/dev/null 2>&1; then
+                applied=$((applied + 1))
+            fi
+        done < <(ss -xl 2>/dev/null | grep -oE '@mykitty[^[:space:]]*' | sort -u)
+        (( applied > 0 )) && status_kitty="applied to $applied"
+    fi
+fi
+
+printf '{"scheme":"%s","kitty":"%s"}\n' "$scheme" "$status_kitty"

config/dot/quickshell/services/AudioDevices.qml

@@ -0,0 +1,43 @@
+pragma Singleton
+
+// Shared PipeWire device discovery and default selection. Quick Settings and
+// Panama Settings intentionally use this same boundary so they cannot disagree
+// about what counts as an input or which node should become the default.
+
+import Quickshell
+import Quickshell.Services.Pipewire
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property var outputs: Pipewire.nodes.values.filter(node =>
+        !node.isStream && node.isSink)
+
+    readonly property var inputs: Pipewire.nodes.values.filter(node =>
+        !node.isStream
+        && (node.type & PwNodeType.AudioSource) === PwNodeType.AudioSource)
+
+    function nodes(output: bool): var {
+        return output ? root.outputs : root.inputs;
+    }
+
+    function current(output: bool): var {
+        return output ? Pipewire.defaultAudioSink : Pipewire.defaultAudioSource;
+    }
+
+    function select(output: bool, node: var): void {
+        if (!node)
+            return;
+        if (output)
+            Pipewire.preferredDefaultAudioSink = node;
+        else
+            Pipewire.preferredDefaultAudioSource = node;
+    }
+
+    function label(node: var): string {
+        if (!node)
+            return "Unknown device";
+        return node.description || node.nickname || node.name || "Unknown device";
+    }
+}

config/dot/quickshell/services/Brightness.qml

@@ -0,0 +1,163 @@
+pragma Singleton
+
+// Panel brightness for external monitors, over DDC/CI.
+//
+// brightnessctl covers laptop panels through the kernel's backlight class. A
+// desktop driving a DisplayPort monitor has no such device, so it has no
+// brightness control at all -- the only way to dim the screen is the buttons on
+// the bezel. DDC/CI is the channel those buttons drive, and monitors expose it
+// over the same I2C lines that carry EDID.
+//
+// Two things shape everything here:
+//
+//   Detection is slow. Probing every I2C bus takes on the order of a second,
+//   which is far too slow to sit in front of a settings page opening. It runs
+//   once, on demand, and afterwards each display is addressed by its bus number
+//   directly.
+//
+//   Writes are slow AND rate-limited by the monitor's firmware. A slider drag
+//   emits values continuously; sending each one produces a queue the panel
+//   works through seconds after the user let go, and some monitors drop or
+//   garble writes that arrive too fast. So `value` updates immediately for the
+//   UI and the hardware write is debounced, with only the latest value sent.
+//
+// Displays are keyed by DRM connector name (DP-2) so they line up with what
+// Hyprland, the Displays page, and the monitor list already call them.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-brightness"
+
+    // [{ bus, connector, model, value }] where value is 0..100.
+    property var displays: []
+    property bool scanning: false
+
+    // Empty when everything is fine. Carries the helper's explanation
+    // otherwise -- most usefully the udev command that grants I2C access,
+    // which is the difference between "brightness is unavailable" and
+    // "brightness is one command away".
+    property string lastError: ""
+
+    readonly property bool available: root.displays.length > 0
+
+    // True once a scan has completed, however it went. Lets the UI tell "not
+    // looked yet" apart from "looked and found nothing", which otherwise render
+    // identically and leave a permanently empty panel with no explanation.
+    property bool scanned: false
+
+    // Pending writes, keyed by bus. A monitor being dragged accumulates exactly
+    // one entry no matter how many values the slider emits.
+    property var pending: ({})
+
+    function refresh(): void {
+        if (root.scanning)
+            return;
+        root.scanning = true;
+        scan.running = true;
+    }
+
+    function displayFor(connector: string): var {
+        return root.displays.find(display => display.connector === connector) ?? null;
+    }
+
+    // Sets brightness for one display. The stored value moves at once so the
+    // slider tracks the pointer; the hardware follows when the drag settles.
+    function set(bus: int, percent: int): void {
+        const clamped = Math.max(0, Math.min(100, Math.round(percent)));
+
+        root.displays = root.displays.map(display =>
+            display.bus === bus ? Object.assign({}, display, { value: clamped }) : display);
+
+        const next = Object.assign({}, root.pending);
+        next[String(bus)] = clamped;
+        root.pending = next;
+        writeDebounce.restart();
+    }
+
+    Process {
+        id: scan
+        command: [root.helperPath, "list"]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.displays = Array.isArray(parsed.displays) ? parsed.displays : [];
+                    root.lastError = String(parsed.error ?? "");
+                } catch (error) {
+                    root.displays = [];
+                    root.lastError = "Could not read the brightness helper's output.";
+                    console.warn("Brightness: could not parse helper output:", error);
+                }
+                root.scanning = false;
+                root.scanned = true;
+            }
+        }
+    }
+
+    // Long enough that a drag produces one write rather than dozens, short
+    // enough that a single click still feels immediate.
+    Timer {
+        id: writeDebounce
+        interval: 120
+        onTriggered: root.pump()
+    }
+
+    // Writes run one at a time, and each is read back.
+    //
+    // Serial because DDC/CI is a bus protocol with no arbitration: two ddcutil
+    // processes talking to the same monitor interleave their exchanges and both
+    // can come back with garbage. Read back because a write is not a promise --
+    // panels clamp to their own range, ignore values while waking from standby,
+    // and drop writes that arrive too quickly. Without the read the slider shows
+    // what Panama asked for rather than what the monitor did, which is the same
+    // class of lie as trusting `hyprctl keyword` to have applied something.
+    property int writingBus: -1
+
+    function pump(): void {
+        if (writer.running || reader.running)
+            return;
+
+        for (const bus in root.pending) {
+            const value = root.pending[bus];
+            const remaining = Object.assign({}, root.pending);
+            delete remaining[bus];
+            root.pending = remaining;
+
+            root.writingBus = parseInt(bus);
+            writer.command = [root.helperPath, "set", bus, String(value)];
+            writer.running = true;
+            return;
+        }
+    }
+
+    Process {
+        id: writer
+        onExited: {
+            reader.command = [root.helperPath, "get", String(root.writingBus)];
+            reader.running = true;
+        }
+    }
+
+    Process {
+        id: reader
+        stdout: StdioCollector {
+            onStreamFinished: {
+                const actual = parseInt(this.text.trim());
+                if (!isNaN(actual)) {
+                    root.displays = root.displays.map(display =>
+                        display.bus === root.writingBus
+                            ? Object.assign({}, display, { value: actual })
+                            : display);
+                }
+                root.writingBus = -1;
+                // Anything queued while this write was in flight goes now.
+                root.pump();
+            }
+        }
+    }
+}

config/dot/quickshell/services/ColorScheme.qml

@@ -0,0 +1,105 @@
+pragma Singleton
+
+// Keeps everything that draws a window agreeing about light or dark.
+//
+// The shell repaints itself from Theme.qml the moment the preference changes,
+// because every token there is a binding. Two other things draw on this desktop
+// and do not read Panama's store:
+//
+//   GTK applications          read gsettings colour-scheme and gtk-theme
+//   the compositor            draws window borders and shadows
+//
+// A toolbar or a window border still wearing the other scheme is more jarring
+// than either scheme on its own, which is why this exists rather than the
+// setting simply being a Theme property.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+import qs.config
+
+Singleton {
+    id: root
+
+    readonly property string appThemePath: Quickshell.shellDir + "/scripts/panama-theme-apps"
+
+    readonly property bool dark: DesktopPreferences.get("colorScheme") !== "light"
+    property string lastError: ""
+
+    // Applied one command at a time: Process runs a single command, and several
+    // of these are separate programs.
+    property var pending: []
+
+    Process {
+        id: runner
+        onExited: (exitCode, exitStatus) => {
+            if (exitCode !== 0)
+                root.lastError = "The colour scheme could not be applied everywhere.";
+            root.drain();
+        }
+    }
+
+    function drain(): void {
+        if (runner.running || root.pending.length === 0)
+            return;
+        const next = root.pending[0];
+        root.pending = root.pending.slice(1);
+        runner.exec(next);
+    }
+
+    function enqueue(commands: var): void {
+        root.pending = root.pending.concat(commands);
+        root.drain();
+    }
+
+    // Pushed once at startup as well as on change: gsettings and the compositor
+    // do not read Panama's store, so a scheme chosen in a previous session is
+    // only in effect for the shell until this runs.
+    Component.onCompleted: settle.restart()
+
+    Timer {
+        id: settle
+        interval: 1200
+        onTriggered: root.apply()
+    }
+
+    Connections {
+        target: DesktopPreferences
+        function onRevisionChanged(): void { coalesce.restart(); }
+    }
+
+    Timer {
+        id: coalesce
+        interval: 250
+        onTriggered: root.apply()
+    }
+
+    function apply(): void {
+        root.lastError = "";
+
+        const scheme = root.dark ? "prefer-dark" : "prefer-light";
+        // Adwaita's light and dark are the same theme; only the preference and
+        // the -dark suffix differ, so applications that honour either agree.
+        const gtkTheme = root.dark ? "Adwaita-dark" : "Adwaita";
+
+        const commands = [
+            ["gsettings", "set", "org.gnome.desktop.interface", "color-scheme", scheme],
+            ["gsettings", "set", "org.gnome.desktop.interface", "gtk-theme", gtkTheme]
+        ];
+
+        // Unfocused window borders. The focused border is the prism gradient and
+        // is already scheme-independent; the inactive one is a flat neutral that
+        // would be invisible against the opposite background.
+        const inactive = root.dark ? "rgba(3b426199)" : "rgba(a8aecb99)";
+        commands.push(["hyprctl", "eval",
+            `hl.config({ general = { col = { inactive_border = "${inactive}" } } })`]);
+
+        // Applications that predate org.freedesktop.appearance and carry their
+        // own palettes -- terminals, chiefly. Everything that reads the portal
+        // (GTK4, Qt6, Chromium, Electron) is already handled by the gsettings
+        // write above and needs nothing here.
+        commands.push([root.appThemePath, root.dark ? "dark" : "light"]);
+
+        root.enqueue(commands);
+    }
+}

config/dot/quickshell/services/Connectivity.qml

@@ -0,0 +1,144 @@
+pragma Singleton
+
+// Network and Bluetooth state for the settings page.
+//
+// The hard parts -- scanning, joining, pairing -- already work in the quick
+// settings panel through Quickshell.Networking and Quickshell.Bluetooth, which
+// speak to NetworkManager and BlueZ over DBus. Nothing here shells out to nmcli
+// or bluetoothctl, and nothing should: the founding requirement for this
+// desktop was never having to drop to a terminal to join a network.
+//
+// This exists so the page does not have to reach into those modules for the
+// same derived values the panel already computes, and so scanning is driven by
+// whether the page is actually on screen. Scanning while nobody is looking is
+// radio time and battery spent on a list that is not being read.
+
+import Quickshell
+import Quickshell.Networking
+import Quickshell.Bluetooth
+import QtQuick
+
+Singleton {
+    id: root
+
+    // Set by the page while it is visible; drives both scanners.
+    property bool active: false
+
+    readonly property var wifiDevice: {
+        for (const device of Networking.devices.values) {
+            if (device.type === DeviceType.Wifi)
+                return device;
+        }
+        return null;
+    }
+
+    readonly property var wiredDevice: {
+        for (const device of Networking.devices.values) {
+            if (device.type === DeviceType.Wired)
+                return device;
+        }
+        return null;
+    }
+
+    readonly property var adapter: Bluetooth.defaultAdapter
+
+    readonly property bool wifiEnabled: Networking.wifiEnabled
+    readonly property bool wifiAvailable: Networking.wifiHardwareEnabled
+
+    // Current network, then saved, then by signal -- the order GNOME uses,
+    // which is the order you actually look for things in.
+    readonly property var networks: {
+        if (!root.wifiDevice || !root.wifiDevice.networks)
+            return [];
+        const list = root.wifiDevice.networks.values.slice();
+        list.sort((a, b) => {
+            if (a.connected !== b.connected)
+                return a.connected ? -1 : 1;
+            if (a.known !== b.known)
+                return a.known ? -1 : 1;
+            return b.signalStrength - a.signalStrength;
+        });
+        return list;
+    }
+
+    readonly property var savedNetworks: root.networks.filter(network => network.known)
+
+    readonly property var bluetoothDevices: {
+        if (!Bluetooth.devices)
+            return [];
+        const list = Bluetooth.devices.values.slice();
+        list.sort((a, b) => {
+            if (a.connected !== b.connected)
+                return a.connected ? -1 : 1;
+            if (a.paired !== b.paired)
+                return a.paired ? -1 : 1;
+            return String(a.name || "").localeCompare(String(b.name || ""));
+        });
+        return list;
+    }
+
+    readonly property var activeNetwork: root.networks.find(network => network.connected) ?? null
+
+    function isSecured(network: var): bool {
+        return network.security !== WifiSecurityType.Open
+            && network.security !== WifiSecurityType.Owe
+            && network.security !== WifiSecurityType.Unknown;
+    }
+
+    function securityLabel(network: var): string {
+        if (!root.isSecured(network))
+            return "Open";
+        switch (network.security) {
+        case WifiSecurityType.Wep: return "WEP";
+        case WifiSecurityType.Wpa: return "WPA";
+        case WifiSecurityType.Wpa2: return "WPA2";
+        case WifiSecurityType.Wpa3: return "WPA3";
+        case WifiSecurityType.Enterprise: return "Enterprise";
+        }
+        return "Secured";
+    }
+
+    // Four bars is what people read signal as, so bucket rather than showing a
+    // percentage that changes every scan and means nothing to anyone.
+    //
+    // signalStrength is 0.0-1.0, NOT a percentage. Treating it as 0-100 puts
+    // every network including the connected one in the bottom bucket, which is
+    // exactly as useless as showing nothing. Thresholds match the icon buckets
+    // in modules/quicksettings/WifiList.qml so the two never disagree.
+    function signalLabel(strength: real): string {
+        if (strength >= 0.8) return "Excellent";
+        if (strength >= 0.55) return "Good";
+        if (strength >= 0.3) return "Fair";
+        if (strength > 0.05) return "Weak";
+        return "No signal";
+    }
+
+    function connectionFailureText(reason: var): string {
+        switch (reason) {
+        case ConnectionFailReason.WifiAuthTimeout:
+        case ConnectionFailReason.Authentication:
+            return "Wrong password";
+        case ConnectionFailReason.WifiNetworkLost:
+            return "Network out of range";
+        }
+        return "Could not connect";
+    }
+
+    // Scanning follows visibility. NetworkManager keeps scanning as long as it
+    // is asked to, and Bluetooth discovery is worse -- it holds the radio.
+    function syncScanners(): void {
+        if (root.wifiDevice)
+            root.wifiDevice.scannerEnabled = root.active && root.wifiEnabled;
+
+        if (root.adapter && root.adapter.enabled) {
+            const shouldDiscover = root.active;
+            if (root.adapter.discovering !== shouldDiscover)
+                root.adapter.discovering = shouldDiscover;
+        }
+    }
+
+    onActiveChanged: root.syncScanners()
+    onWifiDeviceChanged: root.syncScanners()
+    onWifiEnabledChanged: root.syncScanners()
+    onAdapterChanged: root.syncScanners()
+}

config/dot/quickshell/services/Displays.qml

@@ -41,6 +41,7 @@ Singleton {
     property bool revertVerificationActive: false
     property int operationGeneration: 0
     property int revertGeneration: -1
+    property bool externalChangeBlocked: false
     property int secondsLeft: 0
 
     readonly property bool awaitingConfirmation: root.pendingOutput !== ""
@@ -271,6 +272,10 @@ Singleton {
     // Applies immediately and starts the countdown. Nothing is stored yet: the
     // settings file is only written by confirm().
     function apply(output: string, mode: string, scale: real, transform: int): bool {
+        if (root.externalChangeBlocked) {
+            root.lastError = "Wait for Settings to finish restoring before changing a display.";
+            return false;
+        }
         if (root.busy) {
             root.lastError = "Wait for the current display operation to finish.";
             return false;

config/dot/quickshell/services/Fonts.qml

@@ -0,0 +1,102 @@
+pragma Singleton
+
+// Installed fonts, split by what they can actually be used for.
+//
+// Two different questions with different answers: which families are readable
+// as interface text, and which carry the Nerd Font glyphs the shell draws its
+// icons with. Offering one list for both is how you end up with a desktop full
+// of tofu, so they stay separate.
+//
+// Enumerated once on demand. Fonts do not appear while you are looking at a
+// settings page, and fc-list over a few hundred families is not free.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+import qs.config
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-fonts"
+
+    property var interfaceFonts: []
+    property var monospaceFonts: []
+    property var iconFonts: []
+    property bool scanning: false
+    property string lastError: ""
+
+    readonly property string interfaceFont: DesktopPreferences.get("interfaceFont")
+    readonly property string iconFont: DesktopPreferences.get("iconFont")
+
+    readonly property bool loaded: root.interfaceFonts.length > 0
+
+    // True when the stored family is not installed. fontconfig silently
+    // substitutes something else, so the shell keeps working and quietly stops
+    // looking the way it was configured to -- worth saying out loud.
+    readonly property bool interfaceMissing: root.loaded
+        && root.interfaceFonts.indexOf(root.interfaceFont) < 0
+    readonly property bool iconMissing: root.iconFonts.length > 0
+        && root.iconFonts.indexOf(root.iconFont) < 0
+
+    Process {
+        id: scan
+        command: [root.helperPath]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.interfaceFonts = parsed.interface ?? [];
+                    root.monospaceFonts = parsed.monospace ?? [];
+                    root.iconFonts = parsed.icons ?? [];
+                    root.lastError = "";
+                } catch (error) {
+                    root.lastError = "The installed fonts could not be read.";
+                }
+                root.scanning = false;
+            }
+        }
+        onExited: (exitCode, exitStatus) => {
+            root.scanning = false;
+            if (exitCode !== 0)
+                root.lastError = "The installed fonts could not be read.";
+        }
+    }
+
+    Component.onCompleted: root.refresh()
+
+    function refresh(): void {
+        if (scan.running)
+            return;
+        root.scanning = true;
+        scan.running = true;
+    }
+
+    // Only a family this machine reported is accepted, so a hand-edited
+    // settings file cannot put arbitrary text where a font name belongs -- it
+    // reaches hl.config as a string on the compositor side.
+    function setInterface(family: string): bool {
+        if (root.interfaceFonts.indexOf(family) < 0) {
+            root.lastError = "That font is not installed.";
+            return false;
+        }
+        return root.store("interfaceFont", family);
+    }
+
+    function setIcon(family: string): bool {
+        if (root.iconFonts.indexOf(family) < 0) {
+            root.lastError = "That font does not carry icon glyphs.";
+            return false;
+        }
+        return root.store("iconFont", family);
+    }
+
+    function store(key: string, family: string): bool {
+        if (!DesktopPreferences.set(key, family)) {
+            root.lastError = "That font name could not be saved.";
+            return false;
+        }
+        root.lastError = "";
+        return true;
+    }
+}

config/dot/quickshell/services/Geocoding.qml

@@ -0,0 +1,129 @@
+pragma Singleton
+
+// Turning a place name into coordinates.
+//
+// The weather card needs latitude and longitude, but nobody knows their own
+// coordinates, and a settings page that demands them is a settings page nobody
+// changes. Open-Meteo publishes a geocoding endpoint that needs no API key and
+// no account, which is the same reason the forecast itself uses them.
+//
+// Fetched with curl rather than XMLHttpRequest for the same reason as
+// services/Weather.qml: curl is guaranteed present, and a search that fails
+// must leave the page usable rather than producing an error popup.
+//
+// Only the query is sent. The stored location label never leaves the machine.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+import qs.config
+
+Singleton {
+    id: root
+
+    // [{ name, admin, country, latitude, longitude, label }]
+    property var results: []
+    property bool searching: false
+    property string lastError: ""
+    property string lastQuery: ""
+
+    readonly property string endpoint: "https://geocoding-api.open-meteo.com/v1/search"
+
+    Process {
+        id: fetch
+
+        stdout: StdioCollector {
+            onStreamFinished: root.parse(this.text)
+        }
+
+        onExited: (exitCode, exitStatus) => {
+            root.searching = false;
+            if (exitCode !== 0)
+                root.lastError = "Could not reach the location service.";
+        }
+    }
+
+    // Debounced: typing "Denver" should not fire six searches.
+    Timer {
+        id: debounce
+        interval: 350
+        onTriggered: root.run()
+    }
+
+    property string pending: ""
+
+    function search(query: string): void {
+        const trimmed = String(query).trim();
+        root.pending = trimmed;
+        if (trimmed.length < 2) {
+            root.results = [];
+            root.lastError = "";
+            debounce.stop();
+            return;
+        }
+        debounce.restart();
+    }
+
+    function run(): void {
+        if (fetch.running || root.pending.length < 2)
+            return;
+        root.searching = true;
+        root.lastError = "";
+        root.lastQuery = root.pending;
+
+        // --get with --data-urlencode makes curl do the escaping, so a place
+        // name with spaces or an ampersand cannot alter the request.
+        fetch.exec(["curl", "-s", "--max-time", "10", "--get",
+            "--data-urlencode", `name=${root.pending}`,
+            "--data-urlencode", "count=8",
+            "--data-urlencode", "format=json",
+            root.endpoint]);
+    }
+
+    function parse(text: string): void {
+        try {
+            const parsed = JSON.parse(text);
+            const out = [];
+            for (const item of (parsed.results ?? [])) {
+                if (typeof item.latitude !== "number" || typeof item.longitude !== "number")
+                    continue;
+                const admin = item.admin1 ?? "";
+                const country = item.country ?? "";
+                out.push({
+                    name: item.name ?? "",
+                    admin: admin,
+                    country: country,
+                    latitude: item.latitude,
+                    longitude: item.longitude,
+                    // What the user will see stored as their location label.
+                    label: [item.name, admin, country].filter(part => !!part).join(", ")
+                });
+            }
+            root.results = out;
+            root.lastError = out.length === 0 ? "No places match that name." : "";
+        } catch (error) {
+            root.results = [];
+            root.lastError = "The location service returned something unreadable.";
+        }
+    }
+
+    // Stores a chosen place. Coordinates are rounded to four decimals -- roughly
+    // ten metres, far finer than a weather reading resolves, and it keeps a
+    // precise home location out of the settings file.
+    function choose(place: var): bool {
+        const latitude = Math.round(place.latitude * 10000) / 10000;
+        const longitude = Math.round(place.longitude * 10000) / 10000;
+        const label = String(place.label).slice(0, 64);
+
+        const ok = DesktopPreferences.set("weatherLatitude", latitude)
+            && DesktopPreferences.set("weatherLongitude", longitude)
+            && DesktopPreferences.set("weatherLocation", label);
+        if (!ok) {
+            root.lastError = "That location could not be saved.";
+            return false;
+        }
+        root.results = [];
+        root.lastError = "";
+        return true;
+    }
+}

config/dot/quickshell/services/GraphicsDevices.qml

@@ -0,0 +1,89 @@
+pragma Singleton
+
+// The GPUs that can report utilisation.
+//
+// The vitals readout needs one specific sysfs file, and card numbering is
+// neither stable across machines nor meaningful to a person -- this machine has
+// two amdgpu cards, one discrete and one integrated, and picking a number
+// blindly measures whichever the kernel enumerated first.
+//
+// Enumerated on demand rather than polled: hardware does not appear while you
+// are looking at a settings page.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+import qs.config
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-gpus"
+
+    // [{ card, path, name, busy }]
+    property var devices: []
+    property bool scanning: false
+    property string lastError: ""
+
+    readonly property string selectedPath: DesktopPreferences.get("gpuBusyPath")
+
+    readonly property var selected: root.devices.find(device => device.path === root.selectedPath) ?? null
+
+    // True when a GPU is stored that this machine does not have -- after moving
+    // the settings file between machines, say.
+    readonly property bool selectionMissing: root.devices.length > 0 && root.selected === null
+
+    Process {
+        id: scan
+        command: [root.helperPath]
+        stdout: StdioCollector {
+            onStreamFinished: {
+                try {
+                    const parsed = JSON.parse(this.text);
+                    root.devices = Array.isArray(parsed) ? parsed : [];
+                    root.lastError = "";
+                } catch (error) {
+                    root.devices = [];
+                    root.lastError = "The graphics devices could not be read.";
+                }
+                root.scanning = false;
+            }
+        }
+        onExited: (exitCode, exitStatus) => {
+            root.scanning = false;
+            if (exitCode !== 0)
+                root.lastError = "The graphics devices could not be read.";
+        }
+    }
+
+    Component.onCompleted: root.refresh()
+
+    function refresh(): void {
+        if (scan.running)
+            return;
+        root.scanning = true;
+        scan.running = true;
+    }
+
+    // Only a path this machine actually reported is accepted, so a hand-edited
+    // settings file cannot point the readout at an arbitrary file.
+    function select(path: string): bool {
+        if (!root.devices.some(device => device.path === path)) {
+            root.lastError = "That graphics device is not present.";
+            return false;
+        }
+        if (!DesktopPreferences.set("gpuBusyPath", path)) {
+            root.lastError = "That graphics device could not be saved.";
+            return false;
+        }
+        root.lastError = "";
+        return true;
+    }
+
+    // "AMD ... [Radeon RX 7700 XT / 7800 XT] (rev c8)" is what lspci gives; the
+    // bracketed marketing name is the part anyone recognises.
+    function shortName(name: string): string {
+        const bracketed = String(name).match(/\[([^\]]+)\]\s*(?:\(rev[^)]*\))?\s*$/);
+        return bracketed ? bracketed[1] : String(name).replace(/\s*\(rev[^)]*\)\s*$/, "");
+    }
+}

config/dot/quickshell/services/HomeAssistantConfig.qml

@@ -0,0 +1,120 @@
+pragma Singleton
+
+// Redacted Home Assistant configuration state. The helper is the only object
+// that touches the private env file; QML never receives the stored token.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    readonly property string helperPath: Quickshell.shellDir + "/scripts/panama-home-assistant-config"
+
+    property string url: ""
+    property var entities: []
+    property bool tokenConfigured: false
+    property bool configured: false
+    property string lastError: ""
+    property string pendingPayload: ""
+    property var refreshHomeAssistant: function() { HomeAssistant.refresh(); }
+    readonly property bool busy: statusProc.running || writeProc.running
+
+    signal configurationSaved
+
+    function errorMessage(code: string): string {
+        switch (code) {
+        case "invalid-url": return "Enter an HTTP or HTTPS Home Assistant URL.";
+        case "invalid-token": return "The access token contains unsupported characters.";
+        case "invalid-entities": return "Entity IDs must look like light.living_room.";
+        case "read-failed": return "The private configuration file could not be read.";
+        case "write-failed": return "The private configuration file could not be saved.";
+        case "invalid-payload": return "The configuration could not be validated.";
+        default: return code ? "Home Assistant configuration is unavailable." : "";
+        }
+    }
+
+    function applyResult(text: string, saved: bool): void {
+        let result = null;
+        try {
+            result = JSON.parse(text);
+        } catch (error) {
+            result = { ok: false, error: "invalid-response" };
+        }
+        if (result.ok !== true) {
+            root.lastError = root.errorMessage(String(result.error || "invalid-response"));
+            return;
+        }
+        root.url = String(result.url || "");
+        root.entities = Array.isArray(result.entities) ? result.entities : [];
+        root.tokenConfigured = result.tokenConfigured === true;
+        root.configured = result.configured === true;
+        root.lastError = "";
+        if (saved) {
+            root.configurationSaved();
+            root.refreshHomeAssistant();
+        }
+    }
+
+    function refresh(): void {
+        if (!statusProc.running && !writeProc.running)
+            statusProc.running = true;
+    }
+
+    // An empty token means "keep the stored token". Clearing is an explicit
+    // separate action so editing the URL can never erase a secret by accident.
+    function save(url: string, entitiesText: string, token: string): bool {
+        if (root.busy)
+            return false;
+        const payload = { url: url, entities: entitiesText };
+        if (token.trim() !== "")
+            payload.token = token;
+        return root.startWrite(payload);
+    }
+
+    function clearToken(): bool {
+        if (root.busy || !root.tokenConfigured)
+            return false;
+        return root.startWrite({ token: "" });
+    }
+
+    function startWrite(payload: var): bool {
+        root.lastError = "";
+        root.pendingPayload = JSON.stringify(payload);
+        writeProc.running = true;
+        return true;
+    }
+
+    Process {
+        id: statusProc
+        command: [root.helperPath, "status"]
+        stdout: StdioCollector {
+            onStreamFinished: root.applyResult(this.text, false)
+        }
+        onExited: (code, status) => {
+            if (code !== 0 && root.lastError === "")
+                root.lastError = "Home Assistant configuration could not be loaded.";
+        }
+    }
+
+    Process {
+        id: writeProc
+        command: [root.helperPath, "write"]
+        stdinEnabled: true
+        stdout: StdioCollector {
+            onStreamFinished: root.applyResult(this.text, true)
+        }
+        onStarted: {
+            writeProc.write(root.pendingPayload + "\n");
+            root.pendingPayload = "";
+        }
+        onExited: (code, status) => {
+            root.pendingPayload = "";
+            if (code !== 0 && root.lastError === "")
+                root.lastError = "Home Assistant configuration could not be saved.";
+        }
+    }
+
+    Component.onCompleted: root.refresh()
+}

config/dot/quickshell/services/NightLight.qml

@@ -26,6 +26,7 @@ Singleton {
     id: root
 
     property bool initialized: false
+    property bool suppressStatusEvents: false
 
     // The manual switch. Ignored while `automatic` is on.
     property bool enabled: Settings.nightLightEnabledByDefault
@@ -53,6 +54,22 @@ Singleton {
         }
     }
 
+    // Launcher actions already provide immediate Prism OSD feedback. Keep the
+    // ambient Signal Glass channel quiet for that path so one choice produces
+    // one confirmation instead of two competing transients.
+    function toggleQuietly(): void {
+        root.suppressStatusEvents = true;
+        root.toggle();
+        root.suppressStatusEvents = false;
+    }
+
+    function restore(manualEnabled: bool, automaticEnabled: bool): void {
+        root.suppressStatusEvents = true;
+        root.enabled = manualEnabled;
+        root.automatic = automaticEnabled;
+        root.suppressStatusEvents = false;
+    }
+
     // The window wraps midnight (17:00 → 10:00), so the comparison flips when
     // `from` is later in the day than `to`.
     function inWindow(hour: real): bool {
@@ -89,8 +106,36 @@ Singleton {
     onEnabledChanged: DesktopPreferences.set("nightLightEnabled", root.enabled)
     onAutomaticChanged: DesktopPreferences.set("nightLightAutomatic", root.automatic)
 
+    // `enabled`, `temperature`, and `automatic` are declared as bindings on the
+    // store, but a binding is destroyed the moment anything assigns to the
+    // property -- which toggle() does. Without this, the service would write to
+    // the store and never read from it again: Quick Settings would keep working
+    // while the same settings on the Displays page silently did nothing, which
+    // is worse than not offering them there at all.
+    //
+    // No loop: set() is a no-op when the value is unchanged, and assigning a
+    // property its current value emits nothing, so this converges immediately.
+    Connections {
+        target: DesktopPreferences
+        function onRevisionChanged(): void { root.syncFromStore(); }
+    }
+
+    function syncFromStore(): void {
+        const storedEnabled = DesktopPreferences.get("nightLightEnabled") === true;
+        if (root.enabled !== storedEnabled)
+            root.enabled = storedEnabled;
+
+        const storedAutomatic = DesktopPreferences.get("nightLightAutomatic") === true;
+        if (root.automatic !== storedAutomatic)
+            root.automatic = storedAutomatic;
+
+        const storedTemperature = DesktopPreferences.get("nightLightTemperature");
+        if (typeof storedTemperature === "number" && root.temperature !== storedTemperature)
+            root.temperature = storedTemperature;
+    }
+
     onActiveChanged: {
-        if (!root.initialized)
+        if (!root.initialized || root.suppressStatusEvents)
             return;
         StatusEvents.publish({
             key: "display-night-light",

config/dot/quickshell/services/Notifs.qml

@@ -37,6 +37,39 @@ Singleton {
     // Cleared when the notification centre is opened. The bar binds to this.
     property int unreadCount: 0
 
+    // Kept separate from the persisted map so this version can safely run
+    // before the matching schema entry lands. A later accepted write folds the
+    // complete map into DesktopPreferences and clears this fallback.
+    property var fallbackAppRules: ({})
+
+    // Display metadata is intentionally session-only. The durable shape stays
+    // just the per-application rule map, while a fresh notification gives the
+    // settings page a human-readable name straight away.
+    property var rememberedApplications: ({})
+
+    readonly property var persistedAppRules: {
+        const stored = DesktopPreferences.get("notificationAppRules");
+        return stored && typeof stored === "object" && !Array.isArray(stored) ? stored : {};
+    }
+
+    // The schema change is the persistence boundary. This branch keeps a
+    // session fallback only so it remains usable while that companion change
+    // is being integrated; it intentionally makes no restart guarantee then.
+    readonly property bool appRulesSchemaAvailable: PreferenceSchema.has("notificationAppRules")
+
+    readonly property var appRules: Object.assign({}, root.persistedAppRules, root.fallbackAppRules)
+
+    readonly property var applications: {
+        // byId()/heuristicLookup() do not make a binding by themselves. This
+        // read updates persisted app labels once DesktopEntries finishes scan.
+        const entries = DesktopEntries.applications.values;
+        const remembered = root.rememberedApplications;
+        return Object.keys(root.appRules).map(appId => ({
+            id: appId,
+            name: root.applicationLabel(appId, entries, remembered)
+        })).sort((a, b) => a.name.localeCompare(b.name));
+    }
+
     // Arrival times, keyed by notification id — the protocol carries no
     // timestamp. Deliberately formatted once at arrival rather than shown as
     // "5 minutes ago", which would need a clock ticking behind every card.
@@ -49,6 +82,79 @@ Singleton {
 
     readonly property bool hasNotifications: root.history.length > 0
 
+    function notificationAppId(notification: var): string {
+        const desktopEntry = String(notification.desktopEntry ?? "").trim();
+        return desktopEntry || String(notification.appName ?? "").trim() || "Notifications";
+    }
+
+    function applicationLabel(appId: string, entries: var, remembered: var): string {
+        const desktopId = appId.endsWith(".desktop") ? appId.slice(0, -8) : appId;
+        const entry = DesktopEntries.byId(appId)
+            || DesktopEntries.byId(desktopId)
+            || DesktopEntries.heuristicLookup(appId)
+            || DesktopEntries.heuristicLookup(desktopId);
+        return entry?.name || remembered[appId]?.name || appId;
+    }
+
+    function normalizedAppRule(rule: var): var {
+        const source = rule && typeof rule === "object" && !Array.isArray(rule) ? rule : {};
+        return {
+            enabled: source.enabled !== false,
+            showOnLockScreen: source.showOnLockScreen !== false,
+            showContentOnLockScreen: source.showContentOnLockScreen !== false
+        };
+    }
+
+    function appRule(appId: string): var {
+        return root.normalizedAppRule(root.appRules[appId]);
+    }
+
+    function setAppRule(appId: string, patch: var): bool {
+        if (!appId)
+            return false;
+
+        const current = root.appRule(appId);
+        const next = {};
+        for (const knownAppId of Object.keys(root.appRules))
+            next[knownAppId] = root.appRule(knownAppId);
+        next[appId] = {
+            enabled: patch.enabled === undefined ? current.enabled : patch.enabled === true,
+            showOnLockScreen: patch.showOnLockScreen === undefined ? current.showOnLockScreen : patch.showOnLockScreen === true,
+            showContentOnLockScreen: patch.showContentOnLockScreen === undefined ? current.showContentOnLockScreen : patch.showContentOnLockScreen === true
+        };
+
+        if (root.appRulesSchemaAvailable && DesktopPreferences.set("notificationAppRules", next))
+            root.fallbackAppRules = {};
+        else
+            root.fallbackAppRules = next;
+        return true;
+    }
+
+    function rememberApplication(notification: var): string {
+        const appId = root.notificationAppId(notification);
+        const next = Object.assign({}, root.rememberedApplications);
+        next[appId] = {
+            name: String(notification.appName ?? "").trim() || appId
+        };
+        root.rememberedApplications = next;
+
+        if (root.appRules[appId] === undefined)
+            root.setAppRule(appId, {});
+        return appId;
+    }
+
+    // These policy getters deliberately accept Notification objects, so a lock
+    // screen can use the same source of truth without duplicating app matching.
+    function shouldShowOnLockScreen(notification: var): bool {
+        const rule = root.appRule(root.notificationAppId(notification));
+        return rule.enabled && rule.showOnLockScreen;
+    }
+
+    function shouldShowContentOnLockScreen(notification: var): bool {
+        const rule = root.appRule(root.notificationAppId(notification));
+        return rule.enabled && rule.showOnLockScreen && rule.showContentOnLockScreen;
+    }
+
     // history grouped by app, in most-recent-app-first order — the shape
     // NotificationCenter.qml renders directly.
     readonly property var groups: {
@@ -85,13 +191,20 @@ Singleton {
         actionIconsSupported: true
         inlineReplySupported: true
 
-        onNotification: notification => {
+        onNotification: notification => root.handleNotification(notification)
+    }
+
+    function handleNotification(notification: var): void {
             // Replayed from before a shell reload. Letting these through would
             // re-toast and re-list everything on every edit, so they are left
             // untracked and allowed to die.
             if (notification.lastGeneration)
                 return;
 
+            const appId = root.rememberApplication(notification);
+            if (!root.appRule(appId).enabled)
+                return;
+
             // Without this the object is destroyed the instant this returns.
             notification.tracked = true;
             root.arrivals[notification.id] = new Date();
@@ -109,11 +222,10 @@ Singleton {
             if (!root.doNotDisturb)
                 root.popups = [notification].concat(root.popups);
     }
-    }
 
     // ── Mutation ────────────────────────────────────────────────────────────
 
-    function pushHistory(n: Notification): void {
+    function pushHistory(n: var): void {
         const next = [n].concat(root.history);
 
         // Anything past the cap is released, otherwise it stays tracked
@@ -166,7 +278,7 @@ Singleton {
 
     // Called from the `closed` signal — the object is on its way out, so this
     // only ever removes references, never touches the notification.
-    function forget(n: Notification): void {
+    function forget(n: var): void {
         delete root.arrivals[n.id];
         if (root.history.indexOf(n) !== -1)
             root.history = root.history.filter(x => x !== n);

config/dot/quickshell/services/OsdState.qml

@@ -0,0 +1,45 @@
+pragma Singleton
+
+import Quickshell
+import Quickshell.Hyprland
+import QtQuick
+import "../modules/osd/OsdModel.js" as OsdModel
+
+Singleton {
+    id: root
+
+    property bool active: false
+    property string monitorName: ""
+    property var state: OsdModel.messageState("dialog-information-symbolic", "", 1400)
+
+    function present(next: var): void {
+        root.state = next;
+        root.monitorName = Hyprland.focusedMonitor?.name ?? "";
+        root.active = true;
+        if (next.duration > 0) {
+            hideTimer.interval = next.duration;
+            hideTimer.restart();
+        } else {
+            hideTimer.stop();
+        }
+    }
+
+    function progress(kind: string, value: int, maximum: int, label: string): void {
+        root.present(OsdModel.progressState(kind, value, maximum, label, 1400));
+    }
+
+    function message(kind: string, label: string): void {
+        root.present(OsdModel.messageState(kind, label, 1400));
+    }
+
+    function hide(): void {
+        hideTimer.stop();
+        root.active = false;
+    }
+
+    Timer {
+        id: hideTimer
+        interval: 1400
+        onTriggered: root.active = false
+    }
+}

config/dot/quickshell/services/SettingsBackup.qml

@@ -38,6 +38,10 @@ Singleton {
     property var initializeHome: function(ids) { HomePreferences.initialize(ids); }
     property var aliasHome: function(id, alias) { HomePreferences.setAlias(id, alias); }
     property var reloadDesktop: function() { DesktopPreferences.reload(); }
+    property var readDisplays: function() { return DesktopPreferences.get("displays"); }
+    property var protectDisplays: function(value) { return DesktopPreferences.set("displays", value); }
+    property var displayBusy: function() { return Displays.busy || Displays.awaitingConfirmation; }
+    property var setDisplayBlocked: function(blocked) { Displays.externalChangeBlocked = blocked; }
     property var applyCompositor: function() { SystemSettings.applyPersistedDisplayPolicy(); }
     property var reloadKeybinds: function() { Keybinds.applyReload(); }
     property var keybindsReloading: function() { return Keybinds.reloading; }
@@ -47,6 +51,7 @@ Singleton {
     }
     property var applyWallpaper: function(path) { Wallpaper.set(path); }
     property var reloadShell: function() { Quickshell.reload(false); }
+    property var protectedDisplays: ({})
 
     readonly property bool busy: listQuery.running || actionRun.running
         || applyRestoredState.running || settleReload.running
@@ -81,6 +86,10 @@ Singleton {
                 root.lastError = actionRun.restoring
                     ? "That snapshot could not be restored."
                     : "The settings could not be backed up.";
+                if (actionRun.restoring) {
+                    root.setDisplayBlocked(false);
+                    root.protectedDisplays = ({});
+                }
                 return;
             }
             root.lastAction = actionRun.restoring ? "restored" : "saved";
@@ -89,6 +98,10 @@ Singleton {
                 root.lastError = homeReloaded
                     ? ""
                     : "Desktop settings were restored, but Home favourites could not be reloaded.";
+                if (!homeReloaded) {
+                    root.setDisplayBlocked(false);
+                    root.protectedDisplays = ({});
+                }
             } else
                 root.lastError = "";
             root.refresh();
@@ -124,6 +137,8 @@ Singleton {
             // from leaving restored Home state stale indefinitely.
             if ((!root.keybindsReloading() && !root.systemBusy()) || attempts >= 30) {
                 stop();
+                root.setDisplayBlocked(false);
+                root.protectedDisplays = ({});
                 root.reloadShell();
             }
         }
@@ -162,6 +177,8 @@ Singleton {
         if (!root.reloadHomeState(text))
             return false;
         root.reloadDesktop();
+        if (!root.protectDisplays(root.protectedDisplays))
+            return false;
         applyRestoredState.restart();
         return true;
     }
@@ -222,10 +239,18 @@ Singleton {
     function restore(name: string): bool {
         if (actionRun.running)
             return false;
+        if (root.displayBusy()) {
+            root.lastError = "Finish the current display change before restoring settings.";
+            return false;
+        }
         if (!root.snapshots.some(snapshot => snapshot.name === name)) {
             root.lastError = "That snapshot is not in the list.";
             return false;
         }
+        const currentDisplays = root.readDisplays();
+        root.protectedDisplays = JSON.parse(JSON.stringify(
+            currentDisplays && typeof currentDisplays === "object" ? currentDisplays : {}));
+        root.setDisplayBlocked(true);
         actionRun.restoring = true;
         actionRun.exec([root.helperPath, "restore", name]);
         return true;

config/dot/quickshell/services/SettingsSearch.qml

@@ -29,6 +29,7 @@ Singleton {
         "dock": "desktop",
         "focus": "desktop",
         "display": "displays",
+        "nightLight": "displays",
         "idle": "power",
         "accessibility": "accessibility",
         "input": "shortcuts",

config/dot/quickshell/services/SoundFeedback.qml

@@ -0,0 +1,97 @@
+pragma Singleton
+
+// GNOME and GTK applications already honour these desktop sound preferences.
+// Panama controls the same durable keys so moving between sessions does not
+// create two competing notions of whether event feedback is enabled.
+
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+Singleton {
+    id: root
+
+    property bool eventSounds: true
+    property bool inputFeedback: false
+    property string lastError: ""
+    readonly property bool busy: eventRead.running || inputRead.running
+        || eventWrite.running || inputWrite.running
+
+    function parsedBoolean(text: string, fallback: bool): bool {
+        const value = text.trim();
+        if (value === "true")
+            return true;
+        if (value === "false")
+            return false;
+        return fallback;
+    }
+
+    function refresh(): void {
+        if (!eventRead.running)
+            eventRead.running = true;
+        if (!inputRead.running)
+            inputRead.running = true;
+    }
+
+    function setEventSounds(enabled: bool): void {
+        root.eventSounds = enabled;
+        eventWrite.command = ["gsettings", "set", "org.gnome.desktop.sound", "event-sounds", String(enabled)];
+        eventWrite.running = true;
+    }
+
+    function setInputFeedback(enabled: bool): void {
+        root.inputFeedback = enabled;
+        inputWrite.command = ["gsettings", "set", "org.gnome.desktop.sound", "input-feedback-sounds", String(enabled)];
+        inputWrite.running = true;
+    }
+
+    Process {
+        id: eventRead
+        command: ["gsettings", "get", "org.gnome.desktop.sound", "event-sounds"]
+        stdout: StdioCollector {
+            onStreamFinished: root.eventSounds = root.parsedBoolean(this.text, root.eventSounds)
+        }
+        onExited: (code, status) => {
+            if (code !== 0)
+                root.lastError = "Event sound preferences could not be read.";
+        }
+    }
+
+    Process {
+        id: inputRead
+        command: ["gsettings", "get", "org.gnome.desktop.sound", "input-feedback-sounds"]
+        stdout: StdioCollector {
+            onStreamFinished: root.inputFeedback = root.parsedBoolean(this.text, root.inputFeedback)
+        }
+        onExited: (code, status) => {
+            if (code !== 0)
+                root.lastError = "Input feedback preferences could not be read.";
+        }
+    }
+
+    Process {
+        id: eventWrite
+        onExited: (code, status) => {
+            if (code !== 0) {
+                root.lastError = "Event sound preferences could not be changed.";
+                root.refresh();
+            } else {
+                root.lastError = "";
+            }
+        }
+    }
+
+    Process {
+        id: inputWrite
+        onExited: (code, status) => {
+            if (code !== 0) {
+                root.lastError = "Input feedback preferences could not be changed.";
+                root.refresh();
+            } else {
+                root.lastError = "";
+            }
+        }
+    }
+
+    Component.onCompleted: root.refresh()
+}

config/dot/quickshell/services/SystemSettings.qml

@@ -33,6 +33,16 @@ Singleton {
     property string quickshellVersion: "0.3.0"
     property string lastError: ""
 
+    // Explicit seams keep reset sequencing testable without changing the live
+    // keymap, wallpaper, or display from an isolated contract harness.
+    property var displayBusy: function() { return Displays.busy || Displays.awaitingConfirmation; }
+    property var readDisplays: function() { return DesktopPreferences.get("displays"); }
+    property var protectDisplays: function(value) { return DesktopPreferences.set("displays", value); }
+    property var setDisplayBlocked: function(blocked) { Displays.externalChangeBlocked = blocked; }
+    property var reloadKeybinds: function() { Keybinds.applyReload(); }
+    property var keybindsReloading: function() { return Keybinds.reloading; }
+    property var applyWallpaper: function(path) { Wallpaper.set(path); }
+
     readonly property bool busy: monitorQuery.running || serviceQuery.running || versionQuery.running
         || configWrite.running || configVerify.running || bluebubblesQuery.running
 
@@ -196,6 +206,11 @@ Singleton {
     }
 
     // ── Applying options ────────────────────────────────────────────────────
+    // Test harnesses may replace the external compositor boundary while still
+    // exercising validation, commit routing, persistence, and reset replay.
+    // Production leaves this unset and always uses the verified Hyprland path.
+    property var compositorApplyOverride: null
+
     // `values` maps schema keys to values, e.g. { vrrPolicy: 3, gapsOut: 12 }.
     // The whole batch is validated before anything is sent, so one bad value
     // rejects the batch rather than half-applying it.
@@ -217,6 +232,9 @@ Singleton {
         if (Object.keys(requested).length === 0)
             return false;
 
+        if (root.compositorApplyOverride !== null)
+            return root.compositorApplyOverride(requested);
+
         // A write in flight is queued rather than refused. Options are applied
         // and verified one batch at a time, but the callers are a settings UI
         // and a startup replay of every compositor-backed preference -- they
@@ -389,8 +407,22 @@ Singleton {
     //
     // Compositor-backed values are re-applied afterwards, since resetting the
     // stored value does not by itself tell Hyprland anything.
-    function restoreDefaults(): void {
+    function restoreDefaults(): bool {
+        if (root.displayBusy()) {
+            root.lastError = "Finish the current display change before restoring defaults.";
+            return false;
+        }
+
+        const currentDisplays = root.readDisplays();
+        const protectedDisplays = JSON.parse(JSON.stringify(
+            currentDisplays && typeof currentDisplays === "object" ? currentDisplays : {}));
+        root.setDisplayBlocked(true);
         DesktopPreferences.resetDesktopDefaults();
+        if (!root.protectDisplays(protectedDisplays)) {
+            root.setDisplayBlocked(false);
+            root.lastError = "The current display setting could not be protected during reset.";
+            return false;
+        }
 
         // Home accessories keep their own store (panama-home.json), so a reset
         // that only cleared the schema store would silently leave a customised
@@ -401,12 +433,33 @@ Singleton {
         HomePreferences.resetHomeDefaults();
 
         resettleTimer.restart();
+        return true;
     }
 
     Timer {
         id: resettleTimer
         interval: 60
-        onTriggered: root.applyPersistedDisplayPolicy()
+        onTriggered: {
+            root.applyPersistedDisplayPolicy();
+            root.reloadKeybinds();
+            root.applyWallpaper(String(DesktopPreferences.get("wallpaperPath") ?? ""));
+            resetRelease.attempts = 0;
+            resetRelease.restart();
+        }
+    }
+
+    Timer {
+        id: resetRelease
+        property int attempts: 0
+        interval: 100
+        repeat: true
+        onTriggered: {
+            attempts++;
+            if ((!root.keybindsReloading() && !root.busy) || attempts >= 50) {
+                stop();
+                root.setDisplayBlocked(false);
+            }
+        }
     }
 
     function setAutoHdr(enabled: bool): void {

config/dot/quickshell/services/Wallpaper.qml

@@ -33,6 +33,7 @@ Singleton {
     property bool scanning: false
 
     readonly property string configured: DesktopPreferences.get("wallpaperPath")
+    readonly property string shippedPath: `${Quickshell.env("HOME")}/Pictures/Wallpapers/faroe_islands.jpg`
 
     // Directories searched for wallpapers, in order. Screenshots are
     // deliberately excluded: a folder of 300 screenshots is not a wallpaper
@@ -85,6 +86,7 @@ Singleton {
         id: apply
 
         property string requested: ""
+        property string storedValue: ""
         property var remaining: []
 
         onExited: (exitCode, exitStatus) => {
@@ -100,7 +102,7 @@ Singleton {
                 return;
             }
             root.lastError = "";
-            DesktopPreferences.set("wallpaperPath", apply.requested);
+            DesktopPreferences.set("wallpaperPath", apply.storedValue);
             root.refreshActive();
         }
     }
@@ -140,19 +142,16 @@ Singleton {
     // Applies to every connected output. Returns false when the path is not one
     // the schema will accept, so a caller can report the refusal.
     function set(path: string): bool {
-        if (PreferenceSchema.coerce("wallpaperPath", path) === undefined) {
+        const effectivePath = path === "" ? root.shippedPath : path;
+        if (PreferenceSchema.coerce("wallpaperPath", effectivePath) === undefined) {
             root.lastError = "That file path cannot be used as a wallpaper.";
             return false;
         }
         if (apply.running)
             return false;
 
-        apply.requested = path;
+        apply.requested = effectivePath;
-        // "" clears the preference without touching what is on screen.
+        apply.storedValue = path;
-        if (path === "") {
-            DesktopPreferences.set("wallpaperPath", "");
-            return true;
-        }
 
         const outputs = Quickshell.screens.map(screen => screen.name).filter(name => !!name);
         if (outputs.length === 0) {
@@ -161,7 +160,7 @@ Singleton {
         }
 
         apply.remaining = outputs.slice(1);
-        apply.exec(["hyprctl", "hyprpaper", "wallpaper", `${outputs[0]},${path}`]);
+        apply.exec(["hyprctl", "hyprpaper", "wallpaper", `${outputs[0]},${effectivePath}`]);
         return true;
     }
 

config/dot/quickshell/settings-backup-harness.qml

@@ -13,6 +13,9 @@ ShellRoot {
     property var calls: []
     property bool homeInitialized: false
     property var homeFavorites: []
+    property bool displayOperationBusy: false
+    property bool displayBlocked: false
+    property var displayGeneration: ({ "DP-2": { mode: "4500x3000@60", scale: 1.5, transform: 0 } })
 
     function record(name: string): void {
         const next = root.calls.slice();
@@ -43,6 +46,17 @@ ShellRoot {
                 favorite.id === id ? { id: id, alias: alias } : favorite);
         };
         SettingsBackup.reloadDesktop = function() { root.record("desktop.reload"); };
+        SettingsBackup.readDisplays = function() { return root.displayGeneration; };
+        SettingsBackup.protectDisplays = function(value) {
+            root.record("display.protect:" + JSON.stringify(value));
+            root.displayGeneration = value;
+            return true;
+        };
+        SettingsBackup.displayBusy = function() { return root.displayOperationBusy; };
+        SettingsBackup.setDisplayBlocked = function(blocked) {
+            root.record("display.block:" + blocked);
+            root.displayBlocked = blocked;
+        };
         SettingsBackup.applyCompositor = function() { root.record("system.apply"); };
         SettingsBackup.reloadKeybinds = function() { root.record("keybinds.reload"); };
         SettingsBackup.keybindsReloading = function() { return false; };
@@ -59,17 +73,29 @@ ShellRoot {
             root.calls = [];
             root.homeInitialized = false;
             root.homeFavorites = [];
+            root.displayOperationBusy = false;
+            root.displayBlocked = false;
+            SettingsBackup.protectedDisplays = root.displayGeneration;
         }
 
         function apply(output: string): bool {
             return SettingsBackup.handleRestoreOutput(output);
         }
 
+        function restoreWhileDisplayBusy(): bool {
+            root.displayOperationBusy = true;
+            SettingsBackup.snapshots = [{ name: "settings-20260818-010203004.json" }];
+            return SettingsBackup.restore("settings-20260818-010203004.json");
+        }
+
         function status(): string {
             return JSON.stringify({
                 calls: root.calls,
                 initialized: root.homeInitialized,
-                favorites: root.homeFavorites
+                favorites: root.homeFavorites,
+                displayBlocked: root.displayBlocked,
+                displays: root.displayGeneration,
+                lastError: SettingsBackup.lastError
             });
         }
     }

config/dot/quickshell/settings-system-harness.qml

@@ -6,6 +6,48 @@ import qs.config
 import qs.services
 
 ShellRoot {
+    id: root
+
+    property var resetCalls: []
+    property var appliedBatches: []
+    property bool displayBlocked: false
+
+    function recordReset(name: string): void {
+        const next = root.resetCalls.slice();
+        next.push(name);
+        root.resetCalls = next;
+    }
+
+    Component.onCompleted: {
+        // Keep compositor verification entirely inside the isolated harness.
+        // Production applyOptions is covered separately by the Hyprland write
+        // contract; this seam proves commit/reset routing without changing the
+        // desktop that is running the test.
+        if (Quickshell.env("PANAMA_SETTINGS_TEST_ISOLATE_COMPOSITOR") === "1") {
+            SystemSettings.compositorApplyOverride = function(requested) {
+                const batches = root.appliedBatches.slice();
+                batches.push(requested);
+                root.appliedBatches = batches;
+                for (const key in requested)
+                    DesktopPreferences.set(key, requested[key]);
+                return true;
+            };
+        }
+        SystemSettings.displayBusy = function() { return false; };
+        SystemSettings.readDisplays = function() { return DesktopPreferences.get("displays"); };
+        SystemSettings.protectDisplays = function(value) {
+            root.recordReset("display.protect");
+            return DesktopPreferences.set("displays", value);
+        };
+        SystemSettings.setDisplayBlocked = function(blocked) {
+            root.recordReset("display.block:" + blocked);
+            root.displayBlocked = blocked;
+        };
+        SystemSettings.reloadKeybinds = function() { root.recordReset("keybinds.reload"); };
+        SystemSettings.keybindsReloading = function() { return false; };
+        SystemSettings.applyWallpaper = function(path) { root.recordReset("wallpaper.set:" + path); };
+    }
+
     IpcHandler {
         target: "settings-system-test"
 
@@ -52,7 +94,22 @@ ShellRoot {
             });
         }
 
-        function restoreDefaults(): void { SystemSettings.restoreDefaults(); }
+        function restoreDefaults(): bool {
+            root.resetCalls = [];
+            return SystemSettings.restoreDefaults();
+        }
+
+        function resetState(): string {
+            return JSON.stringify({
+                calls: root.resetCalls,
+                displayBlocked: root.displayBlocked,
+                appliedBatches: root.appliedBatches
+            });
+        }
+
+        function applyState(): string {
+            return JSON.stringify(root.appliedBatches);
+        }
 
         function panelAllowed(panel: string): bool {
             return SystemSettings.isGnomePanelAllowed(panel);

config/dot/quickshell/shell.qml

@@ -38,6 +38,7 @@ import qs.modules.datemenu
 import qs.modules.focus
 import qs.modules.signals
 import qs.modules.settings
+import qs.modules.osd
 
 // Clipboard and datemenu ship explicit qmldir manifests because they were
 // added while this daily-driver shell was already running; that also keeps
@@ -72,6 +73,11 @@ ShellRoot {
         SignalGlass {}
     }
 
+    Variants {
+        model: Quickshell.screens
+        Osd {}
+    }
+
     // ── Single-instance overlays ────────────────────────────────────────────
     // These are always constructed but only *visible* when ShellState says so.
     // They're cheap while hidden, and keeping them alive means opening the
@@ -108,7 +114,10 @@ ShellRoot {
     IpcHandler {
         target: "focus"
 
-        function start(): void { FocusSession.startDefault(); }
+        function start(): bool {
+            FocusSession.startDefault();
+            return FocusSession.active;
+        }
         function reveal(): void { FocusSession.reveal(); }
         function dismiss(): void { FocusSession.dismiss(); }
         function pause(): void { FocusSession.pauseOrResume(); }
@@ -117,7 +126,12 @@ ShellRoot {
             ShellState.openOverview(FocusSession.workspaceId);
             FocusSession.dismiss();
         }
-        function end(): void { FocusSession.end(false); }
+        function end(): bool {
+            if (!FocusSession.active)
+                return false;
+            FocusSession.end(false);
+            return !FocusSession.active;
+        }
         function status(): string {
             return JSON.stringify({
                 active: FocusSession.active,
@@ -194,6 +208,25 @@ ShellRoot {
         }
     }
 
+    IpcHandler {
+        target: "osd"
+
+        function progress(kind: string, value: int, maximum: int, label: string): void {
+            OsdState.progress(kind, value, maximum, label);
+        }
+        function message(kind: string, label: string): void {
+            OsdState.message(kind, label);
+        }
+        function hide(): void { OsdState.hide(); }
+        function status(): string {
+            return JSON.stringify({
+                active: OsdState.active,
+                monitorName: OsdState.monitorName,
+                state: OsdState.state
+            });
+        }
+    }
+
     IpcHandler {
         target: "activity"
 
@@ -232,6 +265,38 @@ ShellRoot {
         }
     }
 
+    // Small stateful controls used by launcher commands. Returning the state
+    // after mutation lets callers give accurate OSD feedback without keeping a
+    // second copy of service state in a shell script.
+    IpcHandler {
+        target: "caffeine"
+        function toggle(): bool {
+            Caffeine.toggle();
+            return Caffeine.enabled;
+        }
+        function status(): bool { return Caffeine.enabled; }
+    }
+
+    IpcHandler {
+        target: "night-light"
+        function toggle(): bool {
+            NightLight.toggleQuietly();
+            return NightLight.active;
+        }
+        function status(): bool { return NightLight.active; }
+        function settings(): string {
+            return JSON.stringify({
+                enabled: NightLight.enabled,
+                automatic: NightLight.automatic,
+                active: NightLight.active
+            });
+        }
+        function restore(enabled: bool, automatic: bool): bool {
+            NightLight.restore(enabled, automatic);
+            return NightLight.active;
+        }
+    }
+
     IpcHandler {
         target: "kdeconnect"
         function fixture(name: string): void { KdeConnect.applyFixture(name); }

config/dot/quickshell/sound-page-harness.qml

@@ -0,0 +1,34 @@
+// Read-only contract harness for the Sound page. It instantiates every device
+// row against the real PipeWire graph but exposes no mutating IPC methods.
+
+import Quickshell
+import Quickshell.Io
+import Quickshell.Services.Pipewire
+import QtQuick
+import qs.services
+import qs.modules.settings
+
+ShellRoot {
+    SoundPage {
+        width: 760
+        height: 900
+    }
+
+    PwObjectTracker {
+        objects: AudioDevices.outputs.concat(AudioDevices.inputs)
+    }
+
+    IpcHandler {
+        target: "sound-page-test"
+
+        function status(): string {
+            return JSON.stringify({
+                ready: Pipewire.ready,
+                outputs: AudioDevices.outputs.length,
+                inputs: AudioDevices.inputs.length,
+                defaultOutput: AudioDevices.label(AudioDevices.current(true)),
+                defaultInput: AudioDevices.label(AudioDevices.current(false))
+            });
+        }
+    }
+}

config/dot/quickshell/weather-gpu-harness.qml

@@ -0,0 +1,50 @@
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+import qs.config
+import qs.services
+
+ShellRoot {
+    IpcHandler {
+        target: "weather-gpu-test"
+
+        function gpuStatus(): string {
+            return JSON.stringify({
+                count: GraphicsDevices.devices.length,
+                names: GraphicsDevices.devices.map(d => GraphicsDevices.shortName(d.name)),
+                paths: GraphicsDevices.devices.map(d => d.path),
+                selected: GraphicsDevices.selectedPath,
+                resolved: GraphicsDevices.selected !== null,
+                missing: GraphicsDevices.selectionMissing,
+                error: GraphicsDevices.lastError
+            });
+        }
+
+        function selectGpu(path: string): bool { return GraphicsDevices.select(path); }
+
+        function geoSearch(query: string): void { Geocoding.search(query); }
+
+        function geoStatus(): string {
+            return JSON.stringify({
+                searching: Geocoding.searching,
+                count: Geocoding.results.length,
+                top: Geocoding.results.length > 0 ? Geocoding.results[0].label : "",
+                error: Geocoding.lastError
+            });
+        }
+
+        function geoChooseTop(): bool {
+            if (Geocoding.results.length === 0) return false;
+            return Geocoding.choose(Geocoding.results[0]);
+        }
+
+        function storedLocation(): string {
+            return JSON.stringify({
+                label: DesktopPreferences.get("weatherLocation"),
+                lat: DesktopPreferences.get("weatherLatitude"),
+                lon: DesktopPreferences.get("weatherLongitude")
+            });
+        }
+    }
+}

config/local/share/applications/panama-settings.desktop

@@ -4,7 +4,7 @@ Name=Panama Settings
 GenericName=System Settings
 Comment=Configure the Panama Hyprland desktop
 Exec=qs ipc call settings open
-Icon=preferences-system-symbolic
+Icon=panama-settings
 Terminal=false
 StartupNotify=false
 Categories=Settings;

config/local/share/icons/hicolor/scalable/apps/panama-settings.svg

@@ -0,0 +1,42 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  Panama Settings.
+
+  A gear, because a settings icon has to be recognisable at 48px in a dock
+  before it is anything else - but rendered in the Prism identity rather than
+  the flat monochrome symbolic icon this replaces. Blue leads into orchid, the
+  same pair that marks the focused window, the active workspace, and the
+  hairline along every glass surface.
+
+  The gear is a real toothed outline. An earlier version drew a ring with radial
+  strokes; at dock size the strokes merged into the ring and it read as an X.
+-->
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 128 128" width="128" height="128">
+  <defs>
+    <linearGradient id="prism" x1="0" y1="0" x2="1" y2="1">
+      <stop offset="0%" stop-color="#82aaff"/>
+      <stop offset="55%" stop-color="#9b8ed8"/>
+      <stop offset="100%" stop-color="#b172b0"/>
+    </linearGradient>
+    <linearGradient id="tile" x1="0" y1="0" x2="0" y2="1">
+      <stop offset="0%" stop-color="#2b2e45"/>
+      <stop offset="100%" stop-color="#1e2030"/>
+    </linearGradient>
+    <linearGradient id="edge" x1="0" y1="0" x2="1" y2="0">
+      <stop offset="0%" stop-color="#82aaff" stop-opacity="0"/>
+      <stop offset="22%" stop-color="#82aaff" stop-opacity="0.9"/>
+      <stop offset="78%" stop-color="#b172b0" stop-opacity="0.9"/>
+      <stop offset="100%" stop-color="#b172b0" stop-opacity="0"/>
+    </linearGradient>
+  </defs>
+
+  <rect x="4" y="4" width="120" height="120" rx="28" fill="url(#tile)"/>
+  <rect x="4.5" y="4.5" width="119" height="119" rx="27.5" fill="none"
+        stroke="#c8d3f5" stroke-opacity="0.10" stroke-width="1"/>
+  <path d="M34 6.5 H94" stroke="url(#edge)" stroke-width="1.6" stroke-linecap="round"/>
+
+  <path d="M 52.53 29.88 L 56.45 18.62 L 71.55 18.62 L 75.47 29.88 L 80.02 31.76 L 90.75 26.57 L 101.43 37.25 L 96.24 47.98 L 98.12 52.53 L 109.38 56.45 L 109.38 71.55 L 98.12 75.47 L 96.24 80.02 L 101.43 90.75 L 90.75 101.43 L 80.02 96.24 L 75.47 98.12 L 71.55 109.38 L 56.45 109.38 L 52.53 98.12 L 47.98 96.24 L 37.25 101.43 L 26.57 90.75 L 31.76 80.02 L 29.88 75.47 L 18.62 71.55 L 18.62 56.45 L 29.88 52.53 L 31.76 47.98 L 26.57 37.25 L 37.25 26.57 L 47.98 31.76 Z" fill="url(#prism)" stroke="url(#prism)" stroke-width="5"
+        stroke-linejoin="round"/>
+  <circle cx="64" cy="64" r="15" fill="#1e2030"/>
+  <circle cx="64" cy="64" r="15" fill="none" stroke="#c8d3f5" stroke-opacity="0.18" stroke-width="1.5"/>
+</svg>

config/local/share/icons/panama-settings.svg

@@ -0,0 +1,59 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+  Panama Settings.
+
+  A gear, because a settings icon has to be recognisable at 48px in a dock
+  before it is clever — but rendered in the Prism identity rather than the flat
+  monochrome of the symbolic icon this replaces. Blue leads into orchid across
+  the gradient, the same pair that marks the focused window, the active
+  workspace and the hairline on every glass surface.
+
+  Drawn on the dark tile (#222436) so it reads as an application icon among
+  full-colour ones, rather than as a UI glyph that wandered out of a toolbar.
+-->
+<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 128 128" width="128" height="128">
+  <defs>
+    <linearGradient id="prism" x1="0" y1="0" x2="1" y2="1">
+      <stop offset="0%" stop-color="#82aaff"/>
+      <stop offset="55%" stop-color="#9b8ed8"/>
+      <stop offset="100%" stop-color="#b172b0"/>
+    </linearGradient>
+    <linearGradient id="tile" x1="0" y1="0" x2="0" y2="1">
+      <stop offset="0%" stop-color="#2b2e45"/>
+      <stop offset="100%" stop-color="#1e2030"/>
+    </linearGradient>
+    <linearGradient id="edge" x1="0" y1="0" x2="1" y2="0">
+      <stop offset="0%" stop-color="#82aaff" stop-opacity="0"/>
+      <stop offset="22%" stop-color="#82aaff" stop-opacity="0.85"/>
+      <stop offset="78%" stop-color="#b172b0" stop-opacity="0.85"/>
+      <stop offset="100%" stop-color="#b172b0" stop-opacity="0"/>
+    </linearGradient>
+  </defs>
+
+  <rect x="4" y="4" width="120" height="120" rx="28" fill="url(#tile)"/>
+  <rect x="4.5" y="4.5" width="119" height="119" rx="27.5" fill="none"
+        stroke="#c8d3f5" stroke-opacity="0.10" stroke-width="1"/>
+
+  <!-- The prism hairline, as it appears along the top edge of every glass
+       surface in the shell. -->
+  <path d="M32 6.5 H96" stroke="url(#edge)" stroke-width="1.5" stroke-linecap="round"/>
+
+  <!-- Gear: eight teeth, drawn as a ring with radial spokes so it stays legible
+       when the icon is scaled down to a dock tile. -->
+  <g transform="translate(64 66)">
+    <g fill="none" stroke="url(#prism)" stroke-width="9" stroke-linecap="round">
+      <circle r="24"/>
+      <g>
+        <path d="M0 -38 V-30"/>
+        <path d="M0 38 V30"/>
+        <path d="M-38 0 H-30"/>
+        <path d="M38 0 H30"/>
+        <path d="M-26.9 -26.9 L-21.2 -21.2"/>
+        <path d="M26.9 26.9 L21.2 21.2"/>
+        <path d="M-26.9 26.9 L-21.2 21.2"/>
+        <path d="M26.9 -26.9 L21.2 -21.2"/>
+      </g>
+    </g>
+    <circle r="7.5" fill="#c8d3f5" fill-opacity="0.92"/>
+  </g>
+</svg>

config/local/share/vicinae/scripts/capture.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Screenshot and Recording
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open the polished screenshot and screen-recording picker.
+# @vicinae.keywords ["capture", "record", "selection", "window", "screen"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" capture

config/local/share/vicinae/scripts/end-focus.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: End Focus Session
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description End the current focus timer and restore its previous states.
+# @vicinae.keywords ["stop timer", "deep work", "pomodoro", "restore"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" focus-end

config/local/share/vicinae/scripts/open-calendar.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Calendar
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open the calendar, synchronized agenda, and ongoing activity.
+# @vicinae.keywords ["agenda", "events", "appointments", "date", "nextcloud"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" calendar

config/local/share/vicinae/scripts/open-clipboard.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Clipboard
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open Panama's compact clipboard history surface.
+# @vicinae.keywords ["copy", "paste", "history", "text"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" clipboard

config/local/share/vicinae/scripts/open-control-center.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Control Center
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open Wi-Fi, Bluetooth, audio, phone, and Home controls.
+# @vicinae.keywords ["quick settings", "wifi", "bluetooth", "audio", "home", "phone"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" control-center

config/local/share/vicinae/scripts/open-mission-control.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Mission Control
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description See every workspace, tiled window, and scratchpad window.
+# @vicinae.keywords ["overview", "workspaces", "windows", "expose", "scratchpad"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" overview

config/local/share/vicinae/scripts/open-notifications.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Notifications
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open notification history and the unified date center.
+# @vicinae.keywords ["alerts", "messages", "history", "date center"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" notifications

config/local/share/vicinae/scripts/open-prism-gallery.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Prism Gallery
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Open the living gallery of Panama's production components.
+# @vicinae.keywords ["design system", "theme", "components", "tokyo night", "style"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" gallery

config/local/share/vicinae/scripts/open-settings.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Open Settings
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Configure the Panama desktop from its native Settings app.
+# @vicinae.keywords ["preferences", "configure", "desktop", "system"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" settings

config/local/share/vicinae/scripts/quick-screenshot.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Capture Entire Screen
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Save an immediate screenshot of the complete desktop.
+# @vicinae.keywords ["quick screenshot", "full screen", "capture", "grim"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" screenshot

config/local/share/vicinae/scripts/restart-shell.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Restart Desktop Shell
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Restart Quickshell if a desktop surface becomes unresponsive.
+# @vicinae.keywords ["reload", "repair", "quickshell", "restart", "recover"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" restart-shell

config/local/share/vicinae/scripts/screen-intelligence.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Screen Intelligence
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Select part of the screen for OCR, QR, or code recognition.
+# @vicinae.keywords ["ocr", "text", "qr", "barcode", "recognize", "scan"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" intelligence

config/local/share/vicinae/scripts/start-focus.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Start Focus Session
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Start the configured focus timer with DND and Caffeine.
+# @vicinae.keywords ["timer", "deep work", "pomodoro", "concentrate", "workspace"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" focus-start

config/local/share/vicinae/scripts/toggle-caffeine.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Toggle Caffeine
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Keep the display awake and block automatic sleep.
+# @vicinae.keywords ["awake", "sleep", "inhibit", "presentation", "idle"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" caffeine

config/local/share/vicinae/scripts/toggle-dnd.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Toggle Do Not Disturb
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Pause or resume notification banners, with OSD confirmation.
+# @vicinae.keywords ["dnd", "notifications", "quiet", "silence", "alerts"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" dnd

config/local/share/vicinae/scripts/toggle-microphone.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Toggle Microphone Mute
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Mute or unmute the default microphone with OSD feedback.
+# @vicinae.keywords ["mic", "audio input", "privacy", "mute", "unmute"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" microphone

config/local/share/vicinae/scripts/toggle-night-light.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+# @vicinae.schemaVersion 1
+# @vicinae.title Panama: Toggle Night Light
+# @vicinae.mode silent
+# @vicinae.icon ../../icons/hicolor/scalable/apps/panama-settings.svg
+# @vicinae.description Toggle the warm display color temperature.
+# @vicinae.keywords ["warm", "temperature", "blue light", "display", "hyprsunset"]
+
+exec "$HOME/.config/quickshell/scripts/panama-action" night-light

docs/UPSTREAM-INSPIRATION.md

@@ -0,0 +1,26 @@
+# Upstream inspiration
+
+Panama is its own desktop experience, but it should learn from strong open-source work without obscuring where an idea came from. This ledger records upstream projects that materially influence its architecture or interaction design.
+
+## Omarchy
+
+- Project: [basecamp/omarchy](https://github.com/basecamp/omarchy)
+- Reviewed revision: `f32ebbdb730c4e8fe11e4046cef4267e466264ea`
+- License: MIT, copyright David Heinemeier Hansson
+- Local reference at review time: `/home/gib/Documents/Code/Projects/omarchy`
+
+### Adopted ideas, rebuilt for Panama
+
+- `shell/plugins/osd/Osd.qml` and `OsdModel.js`: inspired the separation between a pure presentation model and a single, click-through per-monitor OSD surface. Panama rebuilt the behavior around freedesktop symbolic icons, Tokyo Night Moon tokens, its Prism glass material, Hyprland's focused monitor, and the existing `wpctl`/`brightnessctl`/`playerctl` keybindings.
+- `test/shell.d/osd-test.sh` and Omarchy's broader shell contract suite: reinforced Panama's use of fast model and integration contracts alongside live compositor verification.
+- Omarchy's small shared visual primitives: reinforced the decision to maintain `prism-gallery.qml`, which renders Panama's production widgets and Theme tokens instead of duplicating mock-only controls.
+- `shell/plugins/menu/Menu.qml`: inspired a searchable desktop-action inventory. Panama keeps Vicinae as its one launcher and exposes native script commands backed by a single `panama-action` dispatcher, rather than adding Omarchy's separate shell menu or plugin host.
+
+No Omarchy user-facing layout or styling was transplanted. Panama keeps its GNOME-derived information architecture, Prism material, Tokyo Night Moon palette, app model, and established interaction choices.
+
+### Candidates still under evaluation
+
+- A plugin boundary for optional bar widgets and services once Panama has enough third-party modules to justify one.
+- A small first-run health check for missing desktop dependencies and broken service integrations.
+
+These are research directions, not commitments. They should only land when they improve the daily-driver experience without adding visible complexity or parallel configuration systems.

install

@@ -21,8 +21,9 @@ fi
 gsettings set org.gnome.desktop.screensaver lock-enabled false
 gsettings set org.gnome.desktop.session idle-delay 0
 
-# Run scripts
+# Run each setup stage in its own process. This keeps strict-shell options and
-for script in ~/.local/share/Panama/setup/scripts/*; do source $script; done
+# helper variables local to the script that owns them.
+for script in ~/.local/share/Panama/setup/scripts/*; do "$script"; done
 
 # Revert to normal idle settings
 gsettings set org.gnome.desktop.screensaver lock-enabled true

setup/scripts/link-dotfiles

@@ -70,6 +70,27 @@ for dir in "${dirs[@]}"; do
   log "Linked $PANAMA_DOT/$dir → $CONFIG/$dir"
 done
 
+# kitty.conf ends with `include current-theme.conf`, and that file is generated
+# from the desktop colour scheme rather than committed -- it is machine state.
+# A fresh checkout therefore has no such file, and kitty starts by complaining
+# about a missing include and falling back to its stock colours. Seed it from
+# the scheme in settings.json (dark unless the user has chosen otherwise) so a
+# first launch is themed; ColorScheme.qml overwrites it on every change after.
+KITTY_THEME="$PANAMA_DOT/kitty/current-theme.conf"
+if [ -e "$KITTY_THEME" ]; then
+  log "Keeping existing kitty theme at $KITTY_THEME"
+else
+  scheme="dark"
+  settings="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
+  if [ -r "$settings" ]; then
+    stored="$(jq -r '.colorScheme // "dark"' "$settings" 2>/dev/null || echo dark)"
+    [ "$stored" = "light" ] && scheme="light"
+  fi
+  [ "$scheme" = "light" ] && theme="tokyonight-day" || theme="tokyonight-moon"
+  cp "$PANAMA_DOT/kitty/themes/$theme.conf" "$KITTY_THEME"
+  log "Seeded kitty $scheme theme ($theme) → $KITTY_THEME"
+fi
+
 # Vicinae 0.26 discovers user themes from its XDG data directory rather than
 # from ~/.config/vicinae. Keep the authored theme in Panama with the rest of
 # the launcher config and expose only that file at Vicinae's runtime path.
@@ -91,6 +112,25 @@ fi
 # Panama-native applications live in the user data directory so launchers can
 # discover them alongside system desktop entries. Keep each authored file in
 # the repository and expose it with a narrow per-file symlink.
+# Panama ships its own application icons. Without these the desktop entries fall
+# back to a generic symbolic glyph, which is drawn for 16px toolbar use and
+# looks wrong beside full-colour application icons in the dock.
+PANAMA_ICON_DIR="$PANAMA_PATH/config/local/share/icons/hicolor/scalable/apps"
+USER_ICON_DIR="$HOME/.local/share/icons/hicolor/scalable/apps"
+mkdir -p "$USER_ICON_DIR"
+for icon_file in "$PANAMA_ICON_DIR"/*.svg; do
+  [[ -e "$icon_file" ]] || continue
+  icon_name="$(basename "$icon_file")"
+  icon_target="$USER_ICON_DIR/$icon_name"
+  if [[ -L "$icon_target" ]]; then
+    rm "$icon_target"
+  elif [[ -e "$icon_target" ]]; then
+    mv "$icon_target" "$icon_target.bak"
+  fi
+  ln -s "$icon_file" "$icon_target"
+done
+gtk-update-icon-cache -f -t "$HOME/.local/share/icons/hicolor" 2>/dev/null || true
+
 PANAMA_APPLICATION_DIR="$PANAMA_PATH/config/local/share/applications"
 USER_APPLICATION_DIR="$HOME/.local/share/applications"
 mkdir -p "$USER_APPLICATION_DIR"

setup/scripts/link-vicinae-scripts

@@ -0,0 +1,53 @@
+#!/usr/bin/env bash
+
+# Install Panama's searchable launcher actions as one narrow directory link.
+# Keeping the runtime path stable lets Vicinae watch it while every command
+# remains authored and reviewed in the Panama repository.
+
+set -euo pipefail
+
+panama_path="${PANAMA_PATH:-$HOME/.local/share/Panama}"
+vicinae_data_dir="${VICINAE_DATA_DIR:-$HOME/.local/share/vicinae}"
+source_dir="$panama_path/config/local/share/vicinae/scripts"
+scripts_dir="$vicinae_data_dir/scripts"
+target_dir="$scripts_dir/panama"
+backup_root="$vicinae_data_dir/backups"
+backup_dir="$backup_root/panama.pre-panama"
+legacy_backup="$scripts_dir/panama.pre-panama"
+
+[[ -d "$source_dir" ]] || {
+    printf 'Panama command source is missing: %s\n' "$source_dir" >&2
+    exit 1
+}
+
+mkdir -p "$scripts_dir" "$backup_root"
+
+# Older Panama builds preserved this directory alongside searchable commands.
+# Move it out before reloading so those scripts cannot appear twice.
+if [[ -e "$legacy_backup" ]]; then
+    if [[ -e "$backup_dir" ]]; then
+        printf 'Refusing to move %s; backup already exists at %s\n' \
+            "$legacy_backup" "$backup_dir" >&2
+        exit 1
+    fi
+    mv "$legacy_backup" "$backup_dir"
+fi
+
+if [[ -L "$target_dir" ]]; then
+    rm "$target_dir"
+elif [[ -e "$target_dir" ]]; then
+    if [[ -e "$backup_dir" ]]; then
+        printf 'Refusing to replace %s; backup already exists at %s\n' \
+            "$target_dir" "$backup_dir" >&2
+        exit 1
+    fi
+    mv "$target_dir" "$backup_dir"
+fi
+
+ln -s "$source_dir" "$target_dir"
+
+# The server also rescans periodically, but an explicit reload makes a setup
+# run deterministic. If Vicinae is not active yet, its startup scan is enough.
+if command -v vicinae >/dev/null 2>&1 && vicinae ping >/dev/null 2>&1; then
+    vicinae cmd launch core:reload-scripts >/dev/null 2>&1 || true
+fi

tests/quickshell/HomeAssistantConfigHarness.qml

@@ -0,0 +1,56 @@
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+import qs.services
+
+ShellRoot {
+    id: root
+
+    property int refreshCalls: 0
+
+    FileView {
+        id: tokenFile
+        path: Quickshell.env("PANAMA_TEST_TOKEN_FILE")
+        blockLoading: true
+        printErrors: false
+    }
+
+    Component.onCompleted: {
+        HomeAssistant.fixtureMode = true;
+        HomeAssistantConfig.refreshHomeAssistant = function() { root.refreshCalls++; };
+    }
+
+    IpcHandler {
+        target: "home-assistant-config-test"
+
+        function save(url: string, entities: string): bool {
+            return HomeAssistantConfig.save(url, entities, "");
+        }
+
+        function saveWithToken(url: string, entities: string): bool {
+            return HomeAssistantConfig.save(url, entities, tokenFile.text());
+        }
+
+        function clearToken(): bool {
+            return HomeAssistantConfig.clearToken();
+        }
+
+        function refresh(): void {
+            HomeAssistantConfig.refresh();
+        }
+
+        function status(): string {
+            return JSON.stringify({
+                url: HomeAssistantConfig.url,
+                entities: HomeAssistantConfig.entities,
+                tokenConfigured: HomeAssistantConfig.tokenConfigured,
+                configured: HomeAssistantConfig.configured,
+                busy: HomeAssistantConfig.busy,
+                lastError: HomeAssistantConfig.lastError,
+                pendingPayloadEmpty: HomeAssistantConfig.pendingPayload === "",
+                refreshCalls: root.refreshCalls
+            });
+        }
+    }
+}

tests/quickshell/NotificationAppRulesHarness.qml

@@ -0,0 +1,126 @@
+import Quickshell
+import Quickshell.Io
+import QtQuick
+
+import qs.config
+import qs.services
+
+ShellRoot {
+    id: root
+
+    function notification(idValue: int, desktopEntryValue: string, appNameValue: string): var {
+        const closeHandlers = [];
+        return {
+            id: idValue,
+            desktopEntry: desktopEntryValue,
+            appName: appNameValue,
+            appIcon: "",
+            transient: false,
+            lastGeneration: false,
+            tracked: false,
+            dismissed: false,
+            closed: {
+                connect: callback => closeHandlers.push(callback)
+            },
+            dismiss: function() {
+                this.dismissed = true;
+                for (const callback of closeHandlers)
+                    callback();
+            }
+        };
+    }
+
+    function resetNotifications(): void {
+        Notifs.history = [];
+        Notifs.popups = [];
+        Notifs.unreadCount = 0;
+        Notifs.doNotDisturb = false;
+    }
+
+    function reset(): void {
+        root.resetNotifications();
+        Notifs.fallbackAppRules = {};
+        Notifs.rememberedApplications = {};
+        DesktopPreferences.set("notificationAppRules", {});
+    }
+
+    IpcHandler {
+        target: "notification-app-rules-test"
+
+        function exercise(): string {
+            root.reset();
+
+            const signal = root.notification(1, "org.signal.Signal.desktop", "Signal");
+            Notifs.handleNotification(signal);
+            const appId = Notifs.notificationAppId(signal);
+            const initialRules = DesktopPreferences.get("notificationAppRules");
+
+            const fallback = root.notification(6, "", "Fallback Terminal");
+            Notifs.handleNotification(fallback);
+            const fallbackId = Notifs.notificationAppId(fallback);
+            const fallbackApplication = Notifs.applications.find(app => app.id === fallbackId);
+
+            root.resetNotifications();
+            Notifs.setAppRule(appId, { enabled: false });
+            const muted = root.notification(2, "org.signal.Signal.desktop", "Signal");
+            Notifs.handleNotification(muted);
+            const mutedResult = {
+                tracked: muted.tracked,
+                history: Notifs.history.length,
+                popups: Notifs.popups.length,
+                unread: Notifs.unreadCount
+            };
+
+            root.reset();
+            Notifs.doNotDisturb = true;
+            const dnd = root.notification(3, "org.signal.Signal.desktop", "Signal");
+            Notifs.handleNotification(dnd);
+
+            Notifs.setAppRule("org.privacy.App.desktop", {
+                showOnLockScreen: false,
+                showContentOnLockScreen: false
+            });
+            const privateNotification = root.notification(4, "org.privacy.App.desktop", "Private");
+
+            return JSON.stringify({
+                appId: appId,
+                initialRules: initialRules,
+                fallback: {
+                    id: fallbackId,
+                    application: fallbackApplication
+                },
+                muted: mutedResult,
+                dnd: {
+                    tracked: dnd.tracked,
+                    history: Notifs.history.length,
+                    popups: Notifs.popups.length,
+                    unread: Notifs.unreadCount
+                },
+                privacy: {
+                    visible: Notifs.shouldShowOnLockScreen(privateNotification),
+                    content: Notifs.shouldShowContentOnLockScreen(privateNotification)
+                }
+            });
+        }
+
+        function persist(): string {
+            root.reset();
+            const notification = root.notification(5, "org.persist.App.desktop", "Persist");
+            Notifs.handleNotification(notification);
+            Notifs.setAppRule("org.persist.App.desktop", {
+                enabled: false,
+                showOnLockScreen: true,
+                showContentOnLockScreen: false
+            });
+            return JSON.stringify(DesktopPreferences.get("notificationAppRules"));
+        }
+
+        function restored(): string {
+            return JSON.stringify(DesktopPreferences.get("notificationAppRules"));
+        }
+
+        function applications(): string {
+            return JSON.stringify(Notifs.applications);
+        }
+    }
+}

tests/quickshell/brightness-helper-contract.sh

@@ -0,0 +1,142 @@
+#!/usr/bin/env bash
+
+# panama-brightness enumerates monitors from sysfs and speaks DDC/CI to them.
+#
+# The parts worth pinning down are the ones that decide whether a slider appears
+# at all, and whether it appears attached to the right screen:
+#
+#   * only connectors with something plugged in are probed, because probing an
+#     empty bus costs a timeout each and there are fourteen of them here;
+#   * a panel that cannot report brightness is omitted rather than shown as a
+#     control that does nothing;
+#   * the connector name matches what Hyprland calls the output, since the UI
+#     joins on it to get the monitor's description;
+#   * no I2C access produces the udev command that fixes it, not "no displays".
+#
+# Runs entirely against fixtures. Real monitors are never touched: both the
+# sysfs root and the device root are redirected, and ddcutil is replaced on PATH.
+
+set -uo pipefail
+
+repo_dir="$(cd "$(dirname "${BASH_SOURCE[0]}")/../.." && pwd)"
+helper="$repo_dir/config/dot/quickshell/scripts/panama-brightness"
+
+fail() {
+    printf 'brightness helper contract: %s\n' "$1" >&2
+    exit 1
+}
+
+fixture="$(mktemp -d /tmp/panama-brightness.XXXXXX)"
+trap 'rm -rf "$fixture"' EXIT
+
+mkdir -p "$fixture/drm" "$fixture/dev" "$fixture/bin" "$fixture/i2c"
+
+# Two connectors with a monitor, two without. DP-2 answers DDC; DP-3 is
+# connected but does not implement brightness. HDMI-A-1 and DP-1 are empty and
+# must never be probed at all.
+make_connector() {
+    local name="$1" bus="$2" status="$3"
+    mkdir -p "$fixture/drm/$name"
+    printf '%s\n' "$status" >"$fixture/drm/$name/status"
+    mkdir -p "$fixture/i2c/i2c-$bus"
+    ln -sfn "$fixture/i2c/i2c-$bus" "$fixture/drm/$name/ddc"
+}
+make_connector card1-DP-1     4  disconnected
+make_connector card1-DP-2     5  connected
+make_connector card1-DP-3     6  connected
+make_connector card1-HDMI-A-1 7  disconnected
+
+# has_accessible_bus only needs one readable/writable node to exist.
+touch "$fixture/dev/i2c-5"
+
+# Stub ddcutil. Records every bus it is asked about so the test can prove the
+# disconnected ones were skipped. Bus 6 refuses, standing in for a panel without
+# VCP 0x10.
+#
+# Bus 5 reports its brightness out of 200 rather than 100. Most panels do use
+# 100, which is exactly the problem: with a maximum of 100 the scaling
+# arithmetic is the identity, so a helper that ignored the reported maximum
+# entirely would pass every assertion. 200 makes reads and writes that skip the
+# conversion visibly wrong.
+cat >"$fixture/bin/ddcutil" <<'STUB'
+#!/usr/bin/env bash
+bus=""
+args=("$@")
+for ((i = 0; i < ${#args[@]}; i++)); do
+    [[ "${args[$i]}" == "--bus" ]] && bus="${args[$((i + 1))]}"
+done
+printf '%s\n' "$bus" >>"$DDCUTIL_PROBE_LOG"
+
+for arg in "$@"; do
+    if [[ "$arg" == "setvcp" ]]; then
+        printf 'set %s %s\n' "$bus" "${args[-1]}" >>"$DDCUTIL_SET_LOG"
+        exit 0
+    fi
+done
+
+case "$bus" in
+    5) printf 'VCP 10 C 120 200\n'; exit 0 ;;
+    *) exit 1 ;;
+esac
+STUB
+chmod +x "$fixture/bin/ddcutil"
+
+export DDCUTIL_PROBE_LOG="$fixture/probes.log"
+export DDCUTIL_SET_LOG="$fixture/sets.log"
+: >"$DDCUTIL_PROBE_LOG"
+: >"$DDCUTIL_SET_LOG"
+
+run_helper() {
+    PATH="$fixture/bin:$PATH" \
+    PANAMA_BRIGHTNESS_DRM_ROOT="$fixture/drm" \
+    PANAMA_BRIGHTNESS_DEV_ROOT="$fixture/dev" \
+        "$helper" "$@"
+}
+
+# ── Enumeration ──────────────────────────────────────────────────────────────
+listing="$(run_helper list)"
+jq -e . >/dev/null 2>&1 <<<"$listing" || fail "list did not emit JSON: $listing"
+
+[[ "$(jq -r '.displays | length' <<<"$listing")" == "1" ]] \
+    || fail "expected exactly one controllable display, got: $listing"
+
+[[ "$(jq -r '.displays[0].connector' <<<"$listing")" == "DP-2" ]] \
+    || fail "the connector name must match Hyprland's output name: $listing"
+
+[[ "$(jq -r '.displays[0].bus' <<<"$listing")" == "5" ]] \
+    || fail "the display was mapped to the wrong I2C bus: $listing"
+
+# 120 of a maximum of 200 is 60%.
+[[ "$(jq -r '.displays[0].value' <<<"$listing")" == "60" ]] \
+    || fail "brightness was not read as a percent of the reported maximum: $listing"
+
+[[ "$(jq -r '.error' <<<"$listing")" == "" ]] \
+    || fail "a successful listing must not carry an error: $listing"
+
+# A connected panel that cannot report brightness is dropped, not listed.
+jq -e '.displays | map(.connector) | index("DP-3") == null' >/dev/null <<<"$listing" \
+    || fail 'a display without VCP 0x10 was listed as controllable'
+
+# ── Disconnected connectors are never probed ─────────────────────────────────
+if grep -qxE '4|7' "$DDCUTIL_PROBE_LOG"; then
+    fail "a disconnected connector was probed -- each empty bus costs a timeout: $(tr '\n' ' ' <"$DDCUTIL_PROBE_LOG")"
+fi
+
+# ── Writes scale to the reported maximum ─────────────────────────────────────
+run_helper set 5 40
+[[ "$(tail -1 "$DDCUTIL_SET_LOG")" == "set 5 80" ]] \
+    || fail "set did not scale to the display's maximum: $(cat "$DDCUTIL_SET_LOG")"
+
+run_helper set 5 500
+[[ "$(tail -1 "$DDCUTIL_SET_LOG")" == "set 5 200" ]] \
+    || fail "an out-of-range percent was not clamped: $(cat "$DDCUTIL_SET_LOG")"
+
+# ── No I2C access explains itself ────────────────────────────────────────────
+rm -f "$fixture/dev"/i2c-*
+denied="$(run_helper list)"
+[[ "$(jq -r '.displays | length' <<<"$denied")" == "0" ]] \
+    || fail "displays were reported without I2C access: $denied"
+grep -q 'udevadm' <<<"$(jq -r '.error' <<<"$denied")" \
+    || fail "the no-access error must name the command that fixes it, got: $(jq -r '.error' <<<"$denied")"
+
+printf 'brightness helper contract: PASS\n'