Wi-Fi had a switch and wired did not, which left no way to take the cable down without reaching for nmcli -- and this machine has two interfaces on one subnet, so turning one off is a genuinely useful thing to be able to do. Both halves are needed to turn it off. Disconnecting alone survives the session but not a carrier event or a reboot, because NetworkManager brings an autoconnecting device straight back; the switch sets the device's autoconnect alongside it. The device property rather than the connection profile, so a toggle here does not quietly rewrite a saved connection somebody expects to come up at boot. The first version built a trap door. It decided whether the switch was usable from hasLink, which reads false while a device is merely disconnected even though NetworkManager still reports the carrier as on -- so turning Ethernet off made the switch disable itself, blame the cable, and offer no way back. A wired device that exists can always be asked to come up; if there is really no cable the attempt fails and says so, which is the honest failure. The word "off" is used where the old text guessed "no cable", because nothing available here can tell those apart. Verified as a round trip against the real device, including that off stays off through eight seconds rather than reconnecting a moment later, and that the mechanism tested is the one the code uses -- the first test drove the connection profile while the code drives the device, which are different things. Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
200 lines
7.2 KiB
QML
200 lines
7.2 KiB
QML
// Network & Devices.
|
|
//
|
|
// Wi-Fi and Bluetooth are handled here rather than delegated. Everything goes
|
|
// through Quickshell.Networking and Quickshell.Bluetooth -- NetworkManager and
|
|
// BlueZ over DBus -- and nothing shells out to nmcli or bluetoothctl. That was
|
|
// the founding requirement for this desktop: never having to drop to a terminal
|
|
// to join a network.
|
|
//
|
|
// Scanning follows this page being on screen. Wi-Fi scanning and especially
|
|
// Bluetooth discovery hold the radio, and doing either for a list nobody is
|
|
// looking at is battery and airtime spent on nothing.
|
|
|
|
import QtQuick
|
|
import Quickshell
|
|
import Quickshell.Networking
|
|
import qs.config
|
|
import qs.services
|
|
|
|
SettingsPage {
|
|
id: root
|
|
|
|
|
|
title: "Network & Devices"
|
|
lede: Connectivity.activeNetwork
|
|
? "Connected to " + Connectivity.activeNetwork.name
|
|
: "Wi-Fi, Bluetooth, and the things Fedora owns."
|
|
|
|
// Drive the scanners only while this page is the one being shown.
|
|
Component.onCompleted: {
|
|
Connectivity.active = true;
|
|
if (!WifiShare.scanned)
|
|
WifiShare.refresh();
|
|
}
|
|
Component.onDestruction: Connectivity.active = false
|
|
|
|
SettingsCard {
|
|
title: "Wired"
|
|
visible: Connectivity.wiredDevice !== null
|
|
|
|
SwitchRow {
|
|
label: "Ethernet"
|
|
// Three states worth telling apart: on, off but plugged in, and
|
|
// nothing in the socket. "Not connected" covered all three and
|
|
// explained none of them.
|
|
detail: {
|
|
const device = Connectivity.wiredDevice;
|
|
if (!device)
|
|
return "";
|
|
if (device.connected)
|
|
return device.name + (device.linkSpeed > 0
|
|
? " · " + device.linkSpeed + " Mb/s" : "");
|
|
// Not "no cable": that cannot be told apart from "switched off"
|
|
// by anything reliable here, and guessing produced a switch
|
|
// that blamed the hardware for what it had just done itself.
|
|
return device.name + " · off";
|
|
}
|
|
checked: Connectivity.wiredOn
|
|
enabled: Connectivity.wiredAvailable
|
|
divider: false
|
|
onToggled: value => Connectivity.setWired(value)
|
|
}
|
|
}
|
|
|
|
SettingsCard {
|
|
title: "Wi-Fi"
|
|
// A Wi-Fi switch reading "On" above the words "No Wi-Fi adapter" is a
|
|
// contradiction; with no radio the card simply does not belong.
|
|
visible: Connectivity.wifiDevice !== null
|
|
subtitle: "Networks are re-scanned while this page is open."
|
|
|
|
SettingRow {
|
|
label: "Wi-Fi"
|
|
detail: Connectivity.wifiEnabled ? "On" : "Off"
|
|
controlWidth: 48
|
|
divider: Connectivity.wifiEnabled
|
|
|
|
SettingsToggle {
|
|
anchors.right: parent.right
|
|
anchors.verticalCenter: parent.verticalCenter
|
|
checked: Connectivity.wifiEnabled
|
|
enabled: Connectivity.wifiAvailable
|
|
onToggled: value => Networking.wifiEnabled = value
|
|
}
|
|
}
|
|
|
|
WifiPanel {
|
|
width: parent.width
|
|
visible: Connectivity.wifiEnabled
|
|
}
|
|
}
|
|
|
|
// Sharing a network by QR, the way GNOME's Wi-Fi panel does. The
|
|
// alternative is reading a passphrase out loud.
|
|
//
|
|
// The image holds the password in machine-readable form, so it is generated
|
|
// on demand rather than up front, and the helper writes it to tmpfs under
|
|
// XDG_RUNTIME_DIR instead of anywhere persistent.
|
|
SettingsCard {
|
|
visible: Connectivity.wifiDevice !== null && WifiShare.shareable.length > 0
|
|
title: "Share a network"
|
|
subtitle: WifiShare.sharing !== ""
|
|
? "Point a phone's camera at the code to join " + WifiShare.sharing + "."
|
|
: "Shows a QR code a phone can scan to join, without reading the password out."
|
|
|
|
Repeater {
|
|
model: WifiShare.shareable
|
|
|
|
ActionRow {
|
|
id: shareRow
|
|
required property var modelData
|
|
required property int index
|
|
|
|
label: shareRow.modelData.ssid
|
|
detail: WifiShare.sharing === shareRow.modelData.name
|
|
? "Showing a code below — anyone who can see the screen can join"
|
|
: "Saved network"
|
|
action: WifiShare.sharing === shareRow.modelData.name ? "Hide" : "Show code"
|
|
divider: shareRow.index < WifiShare.shareable.length - 1 || WifiShare.sharing !== ""
|
|
onTriggered: WifiShare.sharing === shareRow.modelData.name
|
|
? WifiShare.stopSharing()
|
|
: WifiShare.share(shareRow.modelData.name)
|
|
}
|
|
}
|
|
|
|
// Drawn at its natural size on a white plate: a QR code inverted or
|
|
// tinted to match a dark theme is unreliable to scan, and this one has
|
|
// exactly one job.
|
|
Item {
|
|
width: parent.width
|
|
visible: WifiShare.sharing !== "" && WifiShare.imagePath !== ""
|
|
implicitHeight: visible ? plate.height + 20 : 0
|
|
|
|
Rectangle {
|
|
id: plate
|
|
anchors.horizontalCenter: parent.horizontalCenter
|
|
y: 10
|
|
width: 208
|
|
height: 208
|
|
radius: 10
|
|
color: "white"
|
|
|
|
Image {
|
|
anchors.centerIn: parent
|
|
width: 184
|
|
height: 184
|
|
smooth: false
|
|
fillMode: Image.PreserveAspectFit
|
|
cache: false
|
|
source: WifiShare.imagePath !== "" ? "file://" + WifiShare.imagePath : ""
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
SettingsCard {
|
|
title: "Bluetooth"
|
|
visible: Connectivity.adapter !== null
|
|
subtitle: "Discovery runs while this page is open."
|
|
|
|
SettingRow {
|
|
label: "Bluetooth"
|
|
detail: Connectivity.adapter
|
|
? (Connectivity.adapter.enabled ? "On" : "Off")
|
|
: "Unavailable"
|
|
controlWidth: 48
|
|
divider: !!(Connectivity.adapter && Connectivity.adapter.enabled)
|
|
|
|
SettingsToggle {
|
|
anchors.right: parent.right
|
|
anchors.verticalCenter: parent.verticalCenter
|
|
checked: !!(Connectivity.adapter && Connectivity.adapter.enabled)
|
|
enabled: Connectivity.adapter !== null
|
|
onToggled: value => {
|
|
if (Connectivity.adapter)
|
|
Connectivity.adapter.enabled = value;
|
|
}
|
|
}
|
|
}
|
|
|
|
BluetoothPanel {
|
|
width: parent.width
|
|
visible: !!(Connectivity.adapter && Connectivity.adapter.enabled)
|
|
}
|
|
}
|
|
|
|
SettingsCard {
|
|
title: "Owned by Fedora"
|
|
subtitle: "VPNs and per-connection routing are still configured by GNOME's panel, which is installed and searchable. Printers and online accounts have their own pages here."
|
|
|
|
ActionRow {
|
|
label: "Network connections"
|
|
detail: "VPN, proxies, and per-connection settings"
|
|
action: "Open"
|
|
divider: false
|
|
onTriggered: SystemSettings.openGnomePanel("network")
|
|
}
|
|
|
|
}
|
|
}
|