Gabriel Brown
15d54b16f6
sunhat's failure mode was a question twenty minutes into a run. Walking away from an install meant coming back to a prompt that had been waiting an hour. So the questions move to the front. A new interview stage asks what Panama needs to be told -- hostname, git identity, whether to sign in to GitHub, whether to make an SSH key -- shows the answers back, and asks once to proceed. After that nothing asks again. gum is bootstrapped before it runs, because the interview is built on gum and gum arrives with a stage that has not run yet. Answers reach the stages through a mktemp file that install sources and the existing trap deletes, since a child process cannot export into its siblings. They are not remembered between runs: there is no state file to go stale, and one of the answers is an email address. The interview asks only what a stage in this repository actually consumes. Extras, hardware and debloat questions arrive with the stages that act on them -- a prompt whose answer nothing reads is a control that lies. The new contract pins that in both directions, and four deliberate mutations confirmed it catches a question nobody reads, a stage reading something nobody asks, an answers file left on disk, and a declined interview that fails to stop the run. The run now ends with panama-doctor, because a failed-stage count says nothing about a service that did not start. It never changes the exit code: on a fresh machine, unconfigured is the honest answer, not a failure. espanso and oh-my-posh stop being exceptions -- Terra packages espanso-wayland and Fedora packages oh-my-posh, so the curl installer is gone. bun is now the only remaining one. Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
123 lines
4.8 KiB
Bash
Executable File
123 lines
4.8 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
set -euo pipefail
|
|
|
|
# --- Helper functions ---
|
|
log() { echo -e "\033[1;34m[INFO]\033[0m $*"; }
|
|
exists() { command -v "$1" >/dev/null 2>&1; }
|
|
|
|
# --- Defined Paths ---
|
|
PANAMA_PATH="$HOME/.local/share/Panama"
|
|
|
|
echo -e "\n--- Installing Repositories ---"
|
|
log "Installing RPM Fusion Free and Nonfree Repositories"
|
|
sudo dnf install -y https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm > /dev/null
|
|
log "Enabling Fedora Cisco OpenH264 Repository"
|
|
sudo dnf config-manager setopt fedora-cisco-openh264.enabled=1
|
|
log "Installing RPM Fusion AppStream Metadata"
|
|
sudo dnf update @core -y > /dev/null
|
|
sudo dnf install -y rpmfusion-\*-appstream-data > /dev/null
|
|
log "Installing Terra Repository"
|
|
sudo dnf install -y --nogpgcheck --repofrompath 'terra,https://repos.fyralabs.com/terra$releasever' terra-release > /dev/null
|
|
|
|
echo -e "\n--- Installing relevant packages ---"
|
|
log "Updating all packages. This may take a while"
|
|
sudo dnf update -y --refresh > /dev/null
|
|
|
|
log "Updating core, multimedia, and sound-and-video groups"
|
|
# A trailing `&& sync` here previously meant a failing groupupdate was exempt
|
|
# from set -e (bash does not apply -e to the left side of a && list), so the
|
|
# failure went unreported. Sync unconditionally on its own line instead.
|
|
sudo dnf4 groupupdate -y 'core' 'multimedia' 'sound-and-video' \
|
|
--setop='install_weak_deps=False' \
|
|
--exclude='PackageKit-gstreamer-plugin' \
|
|
--allowerasing > /dev/null
|
|
sync
|
|
log "Swapping ffmpeg-free for ffmpeg"
|
|
sudo dnf swap -y 'ffmpeg-free' 'ffmpeg' --allowerasing > /dev/null
|
|
log "Swapping mesa-va-drivers for mesa-va-drivers-freeworld"
|
|
sudo dnf swap -y mesa-va-drivers mesa-va-drivers-freeworld > /dev/null
|
|
log "Upgrading Multimedia group with optional packages"
|
|
sudo dnf4 group upgrade -y --with-optional Multimedia > /dev/null
|
|
log "Installing GStreamer plugins (bad, good, base)"
|
|
sudo dnf install -y gstreamer1-plugins-{bad-\*,good-\*,base} \
|
|
--exclude=gstreamer1-plugins-bad-free-devel > /dev/null
|
|
|
|
# --- Install all initial packages ---
|
|
PACKAGES_FILE="$PANAMA_PATH/setup/packages/initial-packages"
|
|
if [[ -f "$PACKAGES_FILE" ]]; then
|
|
INITIAL_PACKAGES=$(tr "\n" " " <"$PACKAGES_FILE")
|
|
log "Installing Initial Packages"
|
|
echo -e "Includes the following packages:"
|
|
echo -e "$(<"$PACKAGES_FILE")"
|
|
sudo dnf install -y $INITIAL_PACKAGES > /dev/null
|
|
log "Initial packages installed!"
|
|
else
|
|
log "Package list was not in specified path: $PACKAGES_FILE"
|
|
fi
|
|
|
|
# --- Install Desktop Packages ---
|
|
DESKTOP_FILE="$PANAMA_PATH/setup/packages/desktop-packages"
|
|
if [[ -f "$DESKTOP_FILE" ]]; then
|
|
DESKTOP_PACKAGES=$(tr "\n" " " <"$DESKTOP_FILE")
|
|
log "Installing Desktop Packages"
|
|
echo -e "Includes the following packages:"
|
|
echo -e "$(<"$DESKTOP_FILE")"
|
|
sudo dnf install -y $DESKTOP_PACKAGES > /dev/null
|
|
log "Desktop packages installed!"
|
|
else
|
|
log "Package list was not in specified path: $DESKTOP_FILE"
|
|
fi
|
|
|
|
# --- Install Development Packages needed for Neovim ---
|
|
DEV_FILE="$PANAMA_PATH/setup/packages/development-packages"
|
|
if [[ -f "$DEV_FILE" ]]; then
|
|
DEV_PACKAGES=$(tr "\n" " " <"$DEV_FILE")
|
|
log "Installing Development Packages. Mostly for Neovim."
|
|
echo -e "Includes the following packages:"
|
|
echo -e "$(<"$DEV_FILE")"
|
|
sudo dnf install -y $DEV_PACKAGES > /dev/null
|
|
log "Development packages installed!"
|
|
else
|
|
log "Package list was not in specified path: $DEV_FILE"
|
|
fi
|
|
|
|
# --- Install the Hyprland desktop ---
|
|
# Most of these live in the lionheartp/Hyprland COPR rather than Fedora proper.
|
|
HYPR_FILE="$PANAMA_PATH/setup/packages/hyprland-packages"
|
|
if [[ -f "$HYPR_FILE" ]]; then
|
|
log "Enabling Hyprland COPR"
|
|
sudo dnf copr enable -y lionheartp/Hyprland > /dev/null
|
|
HYPR_PACKAGES=$(tr "\n" " " <"$HYPR_FILE")
|
|
log "Installing Hyprland desktop packages"
|
|
echo -e "Includes the following packages:"
|
|
echo -e "$(<"$HYPR_FILE")"
|
|
sudo dnf install -y --setopt=install_weak_deps=False $HYPR_PACKAGES > /dev/null
|
|
log "Hyprland packages installed!"
|
|
else
|
|
log "Package list was not in specified path: $HYPR_FILE"
|
|
fi
|
|
|
|
# --- Install Bun ---
|
|
if [[ -x "$HOME/.bun/bin/bun" ]]; then
|
|
log "Bun already installed at \"$HOME/.bun/bin/bun\""
|
|
else
|
|
log "Installing Bun via curl..."
|
|
curl -fsSL https://bun.sh/install | bash > /dev/null 2>&1
|
|
fi
|
|
|
|
# --- Install Flatpak Packages ---
|
|
FLATPAK_FILE="$PANAMA_PATH/setup/packages/flatpak-packages"
|
|
if [[ -f "$FLATPAK_FILE" ]]; then
|
|
FLATPAK_PACKAGES=$(tr "\n" " " <"$FLATPAK_FILE")
|
|
log "Adding Flathub remote"
|
|
sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo > /dev/null
|
|
log "Installing Flatpak Packages"
|
|
echo -e "Includes the following packages:"
|
|
echo -e "$(<"$FLATPAK_FILE")"
|
|
sudo flatpak install -y flathub $FLATPAK_PACKAGES > /dev/null
|
|
log "Flatpak packages installed!"
|
|
else
|
|
log "Package list was not in specified path: $FLATPAK_FILE"
|
|
fi
|