Gabriel Brown
bd9a55c8eb
Four installer bugs, all in the space between exit codes and intent: - A flatpak-only extras category -- most of them -- died at the grep that filters out its dnf half, because grep exits 1 on zero matches and set -e read that as failure. sed deletes lines without editorial comment. The extras contract now runs a flatpak-only category under the installer's own strict options so this stays fixed. - A rate-limited GitHub API call aborted the whole package stage while resolving the RustDesk URL, even though the empty-result fallback was sitting right below it. The pipeline is now guarded so the fallback is reachable. - Ctrl-C did not stop the install: the INT trap ran cleanup and bash carried on with the remaining stages, MOK enrollment and firmware included. INT and TERM now exit explicitly; cleanup rides EXIT. - change-settings and link-dotfiles ran without set -e, so a failed copy over / or a failed symlink fell through to guarded no-ops and the stage reported success. Turning strictness on immediately caught what it had been hiding: link-dotfiles never created ~/.config, so on a truly fresh HOME every symlink was failing silently.
444 lines
18 KiB
Bash
Executable File
444 lines
18 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
# Strict: a failed mv or ln here used to fall through and exit 0, so a machine
|
|
# could end up half-linked while the installer's summary reported the stage as
|
|
# fine. Anything genuinely optional below carries its own `|| true`.
|
|
set -euo pipefail
|
|
|
|
# --- Helper functions ---
|
|
log() { echo -e "\033[1;34m[INFO]\033[0m $*"; }
|
|
|
|
# Define paths as they have not been defined by new bashrc yet!
|
|
PANAMA_PATH="${PANAMA_PATH:-$HOME/.local/share/Panama}"
|
|
PANAMA_BASH="${PANAMA_BASH:-$PANAMA_PATH/config/bash}"
|
|
PANAMA_DOT="$PANAMA_PATH/config/dot"
|
|
PANAMA_OLD="$PANAMA_PATH/config/old"
|
|
CONFIG="$HOME/.config"
|
|
|
|
# Make backup folder if it doesn't exist -- and ~/.config itself, which a
|
|
# truly fresh HOME does not have yet. Before set -e above, its absence made
|
|
# every symlink below fail silently while the stage still reported success.
|
|
mkdir -p "$PANAMA_OLD" "$CONFIG"
|
|
|
|
# --- Bashrc ---
|
|
echo -e "\n--- Replacing .bashrc ---"
|
|
# Backup existing .bashrc if it's a regular file
|
|
if [ -f "$HOME/.bashrc" ] && [ ! -L "$HOME/.bashrc" ]; then
|
|
log "Backing up existing .bashrc"
|
|
mv "$HOME/.bashrc" "$PANAMA_OLD/.bashrc"
|
|
fi
|
|
# Remove old symlink if it exists and points somewhere else
|
|
if [ -L "$HOME/.bashrc" ]; then
|
|
log "Removing old .bashrc symlink"
|
|
rm "$HOME/.bashrc"
|
|
fi
|
|
# Symlink Panama .bashrc file to ~/.bashrc
|
|
log "Symlinking Panama .bashrc file to ~/.bashrc"
|
|
ln -s "$PANAMA_BASH/.bashrc" "$HOME/.bashrc"
|
|
|
|
# Each entry is symlinked as ~/.config/<name> -> $PANAMA_DOT/<name>.
|
|
#
|
|
# One desktop. "forge" was here while the GNOME session was still the fallback
|
|
# and Hyprland was being built beside it -- that hedge has been paid off, and a
|
|
# configuration for an extension nothing installs is worse than no configuration
|
|
# at all, because it reads as a supported thing.
|
|
#
|
|
# gnome-control-center is a separate matter and stays declared: Panama's own
|
|
# Settings hands off to it for the panels it deliberately does not own.
|
|
dirs=("espanso" "ghostty" "gtk-3.0" "gtk-4.0" "hypr" "kitty" "nvim" \
|
|
"quickshell" "tmux" "uwsm" "vicinae" "wofi" "xdg-desktop-portal")
|
|
|
|
# --- Vim vimrc ---
|
|
echo -e "\n--- Setting up vim ---"
|
|
mkdir -p "$HOME/.vim"
|
|
if [ -L "$HOME/.vim/vimrc" ]; then
|
|
rm "$HOME/.vim/vimrc"
|
|
log "Removed old symlink at ~/.vim/vimrc"
|
|
fi
|
|
if [ -f "$HOME/.vim/vimrc" ]; then
|
|
mv "$HOME/.vim/vimrc" "$PANAMA_OLD/vimrc"
|
|
log "Moved existing ~/.vim/vimrc to $PANAMA_OLD/vimrc"
|
|
fi
|
|
ln -s "$PANAMA_DOT/vim/vimrc" "$HOME/.vim/vimrc"
|
|
log "Linked $PANAMA_DOT/vim/vimrc → ~/.vim/vimrc"
|
|
|
|
for dir in "${dirs[@]}"; do
|
|
echo -e "\n--- Setting up $dir ---"
|
|
|
|
# Remove old symlink if it exists
|
|
if [ -L "$CONFIG/$dir" ]; then
|
|
rm "$CONFIG/$dir"
|
|
log "Removed old symlink at $CONFIG/$dir"
|
|
fi
|
|
|
|
# Backup existing directory if it exists
|
|
if [ -d "$CONFIG/$dir" ]; then
|
|
mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
|
|
log "Moved existing $dir config to $PANAMA_OLD/$dir"
|
|
# A regular file at this path (not a directory, not a symlink) is missed by
|
|
# the guards above, so `ln -s` below would fail with "File exists" -- back
|
|
# it up the same way.
|
|
elif [ -f "$CONFIG/$dir" ]; then
|
|
mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
|
|
log "Moved existing $dir file to $PANAMA_OLD/$dir"
|
|
fi
|
|
|
|
# Create symlink
|
|
ln -s "$PANAMA_DOT/$dir" "$CONFIG/$dir"
|
|
log "Linked $PANAMA_DOT/$dir → $CONFIG/$dir"
|
|
done
|
|
|
|
# tmux.conf ends with a source-file of current-theme.conf, generated from the
|
|
# color scheme rather than committed. Seed it so a fresh checkout starts themed
|
|
# -- the source-file is -q, so a missing file is silent, which would leave tmux
|
|
# unstyled with nothing to explain it.
|
|
TMUX_THEME="$PANAMA_DOT/tmux/current-theme.conf"
|
|
if [ -e "$TMUX_THEME" ]; then
|
|
log "Keeping existing tmux theme at $TMUX_THEME"
|
|
elif [ -d "$PANAMA_DOT/tmux/themes" ]; then
|
|
tmux_scheme="dark"
|
|
tmux_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$tmux_prefs" ]; then
|
|
tmux_stored="$(jq -r '.colorScheme // "dark"' "$tmux_prefs" 2>/dev/null || echo dark)"
|
|
[ "$tmux_stored" = "light" ] && tmux_scheme="light"
|
|
fi
|
|
[ "$tmux_scheme" = "light" ] && tmux_name="tokyonight-day" || tmux_name="tokyonight-moon"
|
|
cp "$PANAMA_DOT/tmux/themes/$tmux_name.conf" "$TMUX_THEME"
|
|
log "Seeded tmux $tmux_scheme theme ($tmux_name) → $TMUX_THEME"
|
|
fi
|
|
|
|
# hyprlock.conf is generated from a template on every color scheme change and
|
|
# is not committed. Seed it so the FIRST lock of a fresh install is themed --
|
|
# without it hyprlock falls back to its own defaults, which is a bare gray
|
|
# screen with none of this desktop's identity, and the first time anyone would
|
|
# find out is when they walked away from the machine.
|
|
HYPRLOCK_TEMPLATE="$PANAMA_DOT/hypr/hyprlock.conf.template"
|
|
HYPRLOCK_CONF="$PANAMA_DOT/hypr/hyprlock.conf"
|
|
if [ -e "$HYPRLOCK_CONF" ]; then
|
|
log "Keeping existing hyprlock config at $HYPRLOCK_CONF"
|
|
elif [ -r "$HYPRLOCK_TEMPLATE" ]; then
|
|
lock_scheme="dark"
|
|
lock_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$lock_prefs" ]; then
|
|
lock_stored="$(jq -r '.colorScheme // "dark"' "$lock_prefs" 2>/dev/null || echo dark)"
|
|
[ "$lock_stored" = "light" ] && lock_scheme="light"
|
|
fi
|
|
if [ "$lock_scheme" = "light" ]; then
|
|
sed -e "s/@FG@/55, 96, 191/g" -e "s/@MUTED@/97, 114, 176/g" \
|
|
-e "s/@ACCENT@/46, 125, 233/g" -e "s/@ERROR@/245, 42, 101/g" \
|
|
-e "s/@BG@/225, 226, 231/g" -e "s/@FIELD@/208, 213, 227/g" \
|
|
-e "s/@MUTED_HEX@/6172b0/g" -e "s/@ERROR_HEX@/f52a65/g" \
|
|
"$HYPRLOCK_TEMPLATE" > "$HYPRLOCK_CONF"
|
|
else
|
|
sed -e "s/@FG@/200, 211, 245/g" -e "s/@MUTED@/130, 139, 184/g" \
|
|
-e "s/@ACCENT@/130, 170, 255/g" -e "s/@ERROR@/255, 117, 127/g" \
|
|
-e "s/@BG@/34, 36, 54/g" -e "s/@FIELD@/46, 47, 61/g" \
|
|
-e "s/@MUTED_HEX@/828bb8/g" -e "s/@ERROR_HEX@/ff757f/g" \
|
|
"$HYPRLOCK_TEMPLATE" > "$HYPRLOCK_CONF"
|
|
fi
|
|
log "Seeded hyprlock $lock_scheme theme → $HYPRLOCK_CONF"
|
|
fi
|
|
|
|
# btop reads themes from its own config directory, but OWNS btop.conf -- it
|
|
# rewrites that file on exit -- so only the theme files are exposed, per file,
|
|
# and the config itself is left to btop. panama-theme-apps edits the single
|
|
# color_theme line in place.
|
|
BTOP_THEME_DIR="${XDG_CONFIG_HOME:-$HOME/.config}/btop/themes"
|
|
mkdir -p "$BTOP_THEME_DIR"
|
|
for btop_theme_src in "$PANAMA_DOT"/btop/themes/*.theme; do
|
|
[ -e "$btop_theme_src" ] || continue
|
|
btop_theme_dst="$BTOP_THEME_DIR/$(basename "$btop_theme_src")"
|
|
if [ -L "$btop_theme_dst" ]; then
|
|
rm "$btop_theme_dst"
|
|
fi
|
|
if [ -e "$btop_theme_dst" ]; then
|
|
log "Keeping existing btop theme at $btop_theme_dst"
|
|
else
|
|
ln -s "$btop_theme_src" "$btop_theme_dst"
|
|
log "Linked btop theme → $btop_theme_dst"
|
|
fi
|
|
done
|
|
|
|
# GTK3 has no include mechanism, so its settings.ini is generated whole from a
|
|
# template rather than layered. Without this, a fresh checkout has a template
|
|
# and no settings.ini, and GTK3 applications fall back to their built-in theme.
|
|
# panama-theme-apps rewrites both files on every scheme change after this.
|
|
for gtk_version in 3.0 4.0; do
|
|
gtk_template="$PANAMA_DOT/gtk-$gtk_version/settings.ini.template"
|
|
gtk_settings="$PANAMA_DOT/gtk-$gtk_version/settings.ini"
|
|
[ -r "$gtk_template" ] || continue
|
|
if [ -e "$gtk_settings" ]; then
|
|
log "Keeping existing GTK settings at $gtk_settings"
|
|
else
|
|
gtk_scheme="dark"
|
|
gtk_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$gtk_prefs" ]; then
|
|
gtk_stored="$(jq -r '.colorScheme // "dark"' "$gtk_prefs" 2>/dev/null || echo dark)"
|
|
[ "$gtk_stored" = "light" ] && gtk_scheme="light"
|
|
fi
|
|
if [ "$gtk_scheme" = "light" ]; then
|
|
gtk_name="adw-gtk3"; gtk_dark=0
|
|
else
|
|
gtk_name="adw-gtk3-dark"; gtk_dark=1
|
|
fi
|
|
sed -e "s/@GTK_THEME@/$gtk_name/" -e "s/@PREFER_DARK@/$gtk_dark/" \
|
|
"$gtk_template" > "$gtk_settings"
|
|
log "Generated GTK $gtk_version settings ($gtk_name) → $gtk_settings"
|
|
fi
|
|
done
|
|
|
|
# kitty.conf ends with `include current-theme.conf`, and that file is generated
|
|
# from the desktop color scheme rather than committed -- it is machine state.
|
|
# A fresh checkout therefore has no such file, and kitty starts by complaining
|
|
# about a missing include and falling back to its stock colors. Seed it from
|
|
# the scheme in settings.json (dark unless the user has chosen otherwise) so a
|
|
# first launch is themed; ColorScheme.qml overwrites it on every change after.
|
|
KITTY_THEME="$PANAMA_DOT/kitty/current-theme.conf"
|
|
if [ -e "$KITTY_THEME" ]; then
|
|
log "Keeping existing kitty theme at $KITTY_THEME"
|
|
else
|
|
scheme="dark"
|
|
settings="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$settings" ]; then
|
|
stored="$(jq -r '.colorScheme // "dark"' "$settings" 2>/dev/null || echo dark)"
|
|
[ "$stored" = "light" ] && scheme="light"
|
|
fi
|
|
[ "$scheme" = "light" ] && theme="tokyonight-day" || theme="tokyonight-moon"
|
|
cp "$PANAMA_DOT/kitty/themes/$theme.conf" "$KITTY_THEME"
|
|
log "Seeded kitty $scheme theme ($theme) → $KITTY_THEME"
|
|
fi
|
|
|
|
# Vicinae 0.26 discovers user themes from its XDG data directory rather than
|
|
# from ~/.config/vicinae. Keep the authored theme in Panama with the rest of
|
|
# the launcher config and expose only that file at Vicinae's runtime path.
|
|
VICINAE_THEME_DIR="$HOME/.local/share/vicinae/themes"
|
|
mkdir -p "$VICINAE_THEME_DIR"
|
|
|
|
# Every authored theme, not just the dark one: vicinae.json selects a theme per
|
|
# system appearance, so linking only Moon left the launcher falling back to its
|
|
# stock palette whenever Panama was in light mode.
|
|
for theme_src in "$PANAMA_DOT"/vicinae/themes/*.toml; do
|
|
[ -e "$theme_src" ] || continue
|
|
theme_dst="$VICINAE_THEME_DIR/$(basename "$theme_src")"
|
|
|
|
if [ -L "$theme_dst" ]; then
|
|
rm "$theme_dst"
|
|
fi
|
|
|
|
if [ -e "$theme_dst" ]; then
|
|
log "Keeping existing Vicinae theme at $theme_dst"
|
|
else
|
|
ln -s "$theme_src" "$theme_dst"
|
|
log "Linked Vicinae theme → $theme_dst"
|
|
fi
|
|
done
|
|
|
|
# Panama-native applications live in the user data directory so launchers can
|
|
# discover them alongside system desktop entries. Keep each authored file in
|
|
# the repository and expose it with a narrow per-file symlink.
|
|
# Panama ships its own application icons. Without these the desktop entries fall
|
|
# back to a generic symbolic glyph, which is drawn for 16px toolbar use and
|
|
# looks wrong beside full-color application icons in the dock.
|
|
PANAMA_ICON_DIR="$PANAMA_PATH/config/local/share/icons/hicolor/scalable/apps"
|
|
USER_ICON_DIR="$HOME/.local/share/icons/hicolor/scalable/apps"
|
|
mkdir -p "$USER_ICON_DIR"
|
|
for icon_file in "$PANAMA_ICON_DIR"/*.svg; do
|
|
[[ -e "$icon_file" ]] || continue
|
|
icon_name="$(basename "$icon_file")"
|
|
icon_target="$USER_ICON_DIR/$icon_name"
|
|
if [[ -L "$icon_target" ]]; then
|
|
rm "$icon_target"
|
|
elif [[ -e "$icon_target" ]]; then
|
|
mv "$icon_target" "$icon_target.bak"
|
|
fi
|
|
ln -s "$icon_file" "$icon_target"
|
|
done
|
|
gtk-update-icon-cache -f -t "$HOME/.local/share/icons/hicolor" 2>/dev/null || true
|
|
|
|
# The pointer theme. oreo_blue_cursors is packaged by no Fedora repository -- it
|
|
# is a GitHub project -- so rather than download it at install time and depend on
|
|
# a URL that can rot, the theme is vendored into this repository and exposed the
|
|
# same way Panama's application icons are. Without it, every gsettings value,
|
|
# GTK settings.ini and XCURSOR_THEME naming it resolves to nothing and the
|
|
# session falls back to the default pointer.
|
|
PANAMA_CURSOR_DIR="$PANAMA_PATH/config/local/share/icons"
|
|
USER_CURSOR_DIR="$HOME/.local/share/icons"
|
|
mkdir -p "$USER_CURSOR_DIR"
|
|
for cursor_src in "$PANAMA_CURSOR_DIR"/*_cursors; do
|
|
[ -d "$cursor_src" ] || continue
|
|
cursor_name="$(basename "$cursor_src")"
|
|
cursor_dst="$USER_CURSOR_DIR/$cursor_name"
|
|
if [ -L "$cursor_dst" ]; then
|
|
rm "$cursor_dst"
|
|
elif [ -e "$cursor_dst" ]; then
|
|
log "Keeping existing cursor theme at $cursor_dst"
|
|
continue
|
|
fi
|
|
ln -s "$cursor_src" "$cursor_dst"
|
|
log "Linked cursor theme → $cursor_dst"
|
|
done
|
|
|
|
# The wallpaper the desktop already believes it ships. Wallpaper.qml calls this
|
|
# path `shippedPath` and substitutes it whenever wallpaperPath is unset, which is
|
|
# its default; panama-lock falls back to the same file, and hyprpaper.conf names
|
|
# it directly. Copied rather than symlinked, because ~/Pictures/Wallpapers is a
|
|
# directory the user owns and adds their own images to -- a symlink there would
|
|
# be a repository file masquerading as one of their own.
|
|
PANAMA_WALLPAPER_DIR="$PANAMA_PATH/config/wallpapers"
|
|
USER_WALLPAPER_DIR="$HOME/Pictures/Wallpapers"
|
|
if [ -d "$PANAMA_WALLPAPER_DIR" ]; then
|
|
mkdir -p "$USER_WALLPAPER_DIR"
|
|
for wallpaper_src in "$PANAMA_WALLPAPER_DIR"/*; do
|
|
[ -f "$wallpaper_src" ] || continue
|
|
wallpaper_dst="$USER_WALLPAPER_DIR/$(basename "$wallpaper_src")"
|
|
if [ -e "$wallpaper_dst" ]; then
|
|
log "Keeping existing wallpaper at $wallpaper_dst"
|
|
else
|
|
cp "$wallpaper_src" "$wallpaper_dst"
|
|
log "Copied wallpaper → $wallpaper_dst"
|
|
fi
|
|
done
|
|
fi
|
|
|
|
# The Firefox chrome. Edge-Frfox, vendored in config/firefox -- see the README
|
|
# there for what it is and whose it is. Both halves have to land or neither
|
|
# works: chrome/ holds the CSS, and user.js sets the preference that makes
|
|
# Firefox read chrome/ at all.
|
|
#
|
|
# Firefox has moved to the XDG directories, so a current build keeps profiles in
|
|
# ~/.config/mozilla/firefox and an older one in ~/.mozilla/firefox. Both are
|
|
# looked for rather than assumed -- assuming picked the wrong one on the machine
|
|
# this was written on.
|
|
PANAMA_FIREFOX_DIR="$PANAMA_PATH/config/firefox"
|
|
firefox_root=""
|
|
find_firefox_root() {
|
|
local candidate
|
|
for candidate in "${XDG_CONFIG_HOME:-$HOME/.config}/mozilla/firefox" "$HOME/.mozilla/firefox"; do
|
|
if [ -f "$candidate/profiles.ini" ]; then
|
|
firefox_root="$candidate"
|
|
return 0
|
|
fi
|
|
done
|
|
return 1
|
|
}
|
|
|
|
if [ -d "$PANAMA_FIREFOX_DIR" ] && command -v firefox >/dev/null 2>&1; then
|
|
echo -e "\n--- Setting up Firefox chrome ---"
|
|
|
|
# A profile does not exist until Firefox has been run once. -CreateProfile is
|
|
# a documented flag that creates one and exits rather than opening a window,
|
|
# so a fresh machine gets the theme on the first install instead of the
|
|
# second. MOZ_HEADLESS in case a future build decides otherwise.
|
|
if ! find_firefox_root; then
|
|
log "No Firefox profile yet; creating one"
|
|
MOZ_HEADLESS=1 firefox -CreateProfile panama >/dev/null 2>&1 || true
|
|
find_firefox_root || true
|
|
fi
|
|
|
|
if [ -z "$firefox_root" ]; then
|
|
log "Could not find or create a Firefox profile; skipping the chrome"
|
|
else
|
|
# Every profile, not just the default. profiles.ini records each one as a
|
|
# path that is relative to the root unless it says otherwise.
|
|
while read -r profile; do
|
|
[ -n "$profile" ] || continue
|
|
[ -d "$profile" ] || continue
|
|
|
|
for piece in chrome user.js; do
|
|
target="$profile/$piece"
|
|
if [ -L "$target" ]; then
|
|
rm "$target"
|
|
elif [ -e "$target" ]; then
|
|
backup="$PANAMA_OLD/firefox-$(basename "$profile")-$piece"
|
|
mv "$target" "$backup"
|
|
log "Moved existing $target to $backup"
|
|
fi
|
|
ln -s "$PANAMA_FIREFOX_DIR/$piece" "$target"
|
|
log "Linked $PANAMA_FIREFOX_DIR/$piece → $target"
|
|
done
|
|
done < <(awk -F= -v root="$firefox_root" '
|
|
/^\[/ { relative = 1; next }
|
|
/^IsRelative=/ { relative = $2; next }
|
|
/^Path=/ { print (relative == 1 ? root "/" $2 : $2) }
|
|
' "$firefox_root/profiles.ini")
|
|
fi
|
|
fi
|
|
|
|
PANAMA_APPLICATION_DIR="$PANAMA_PATH/config/local/share/applications"
|
|
USER_APPLICATION_DIR="$HOME/.local/share/applications"
|
|
mkdir -p "$USER_APPLICATION_DIR"
|
|
for desktop_file in "$PANAMA_APPLICATION_DIR"/*.desktop; do
|
|
[[ -e "$desktop_file" ]] || continue
|
|
desktop_name="$(basename "$desktop_file")"
|
|
desktop_target="$USER_APPLICATION_DIR/$desktop_name"
|
|
if [[ -L "$desktop_target" ]]; then
|
|
rm "$desktop_target"
|
|
elif [[ -e "$desktop_target" ]]; then
|
|
log "Keeping existing desktop entry at $desktop_target"
|
|
continue
|
|
fi
|
|
ln -s "$desktop_file" "$desktop_target"
|
|
log "Linked $desktop_name → $desktop_target"
|
|
done
|
|
|
|
# Curate what files open with, now that Panama's own entries are linked.
|
|
#
|
|
# Left alone, a machine decides this by installation order -- whichever
|
|
# application registered for image/png last wins it -- which is how a pixel-art
|
|
# editor ends up owning screenshots and a video transcoder ends up owning MP3s.
|
|
# Seeding only fills roles nobody has chosen for; an existing "Open With" choice
|
|
# is always kept.
|
|
# Panama's own systemd user units -- currently the Flatpak update timer, which
|
|
# the Updates page switches on and off. Linked rather than copied so an edit in
|
|
# the repository is the edit that runs.
|
|
PANAMA_UNIT_DIR="$PANAMA_PATH/config/local/share/systemd/user"
|
|
USER_UNIT_DIR="${XDG_DATA_HOME:-$HOME/.local/share}/systemd/user"
|
|
if [[ -d "$PANAMA_UNIT_DIR" ]]; then
|
|
mkdir -p "$USER_UNIT_DIR"
|
|
for unit_file in "$PANAMA_UNIT_DIR"/*; do
|
|
[[ -e "$unit_file" ]] || continue
|
|
unit_name="$(basename "$unit_file")"
|
|
unit_target="$USER_UNIT_DIR/$unit_name"
|
|
if [[ -L "$unit_target" ]]; then
|
|
rm "$unit_target"
|
|
elif [[ -e "$unit_target" ]]; then
|
|
log "Keeping existing unit at $unit_target"
|
|
continue
|
|
fi
|
|
ln -s "$unit_file" "$unit_target"
|
|
log "Linked $unit_name → $unit_target"
|
|
done
|
|
systemctl --user daemon-reload 2>/dev/null || true
|
|
fi
|
|
|
|
# Quadlets: container definitions systemd turns into units at boot. Linked
|
|
# per-file into the directory the podman generator reads, rather than by
|
|
# symlinking ~/.config/containers wholesale -- podman keeps its registries,
|
|
# storage and login credentials in there, and that directory is the user's.
|
|
PANAMA_QUADLET_DIR="$PANAMA_PATH/config/containers"
|
|
USER_QUADLET_DIR="${XDG_CONFIG_HOME:-$HOME/.config}/containers/systemd"
|
|
if [ -d "$PANAMA_QUADLET_DIR" ]; then
|
|
mkdir -p "$USER_QUADLET_DIR"
|
|
for quadlet in "$PANAMA_QUADLET_DIR"/*/*.container; do
|
|
[ -e "$quadlet" ] || continue
|
|
quadlet_dst="$USER_QUADLET_DIR/$(basename "$quadlet")"
|
|
if [ -L "$quadlet_dst" ]; then
|
|
rm "$quadlet_dst"
|
|
elif [ -e "$quadlet_dst" ]; then
|
|
log "Keeping existing quadlet at $quadlet_dst"
|
|
continue
|
|
fi
|
|
ln -s "$quadlet" "$quadlet_dst"
|
|
log "Linked quadlet → $quadlet_dst"
|
|
done
|
|
systemctl --user daemon-reload 2>/dev/null || true
|
|
fi
|
|
|
|
DEFAULT_APPS_HELPER="$PANAMA_PATH/config/dot/quickshell/scripts/panama-default-apps"
|
|
if [[ -x "$DEFAULT_APPS_HELPER" ]] && command -v xdg-mime >/dev/null 2>&1; then
|
|
update-desktop-database "$USER_APPLICATION_DIR" >/dev/null 2>&1 || true
|
|
while IFS= read -r seeded_line; do
|
|
log "Default applications: $seeded_line"
|
|
done < <("$DEFAULT_APPS_HELPER" seed 2>&1 || true)
|
|
fi
|