gib/Panama
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

base: gib/Panama:feat/phase2-expectation-gaps
Branches Tags
gib/Panama:main gib/Panama:wip/over-hardening-fix-wave gib/Panama:feat/phase2-expectation-gaps gib/Panama:feat/settings-ownership gib/Panama:feat/gnome-tweaks-parity gib/Panama:feat/panama-health gib/Panama:fix/osd-ddc-brightness gib/Panama:feat/panama-commands gib/Panama:fix/panama-displays-review gib/Panama:feat/panama-settings-home-phone
...
compare: gib/Panama:86825e73279b87d2ce9a3f6ea9755e418290af47
Branches Tags
gib/Panama:main gib/Panama:wip/over-hardening-fix-wave gib/Panama:feat/phase2-expectation-gaps gib/Panama:feat/settings-ownership gib/Panama:feat/gnome-tweaks-parity gib/Panama:feat/panama-health gib/Panama:fix/osd-ddc-brightness gib/Panama:feat/panama-commands gib/Panama:fix/panama-displays-review gib/Panama:feat/panama-settings-home-phone
96 Commits
feat/phase2-expectation-gaps ... 86825e7327
Author SHA1 Message Date
Gabriel Brown 86825e7327 Judge the document portal by its mount, not by its service 
No flatpak would launch. Every one of them failed in bwrap with "Can't find
source path /run/user/1000/doc/by-app/<id>", because xdg-document-portal's fuse
mount was gone -- /run/user/1000/doc was a plain empty directory. That mount is
bound into every sandbox bwrap builds, so losing it takes out all 34 flatpaks at
once, never a subset.

It had been gone for three days. The shipped unit is Type=dbus with Restart=no,
so nothing retries it on failure: after it exited 21 it came back only because a
flatpak called its bus name two seconds later, and that activation landed on the
dying instance's mountpoint and came up with no mount at all. systemctl reports
active (running) either way -- the fusermount3 helper is still sitting there as a
child, in this case for two and a half days without ever completing the mount.

Nothing running notices, which is what makes it so quiet. A sandbox needs the
mount only while it is being constructed, so everything already open keeps
working and the symptom arrives whenever you next open a flatpak you had not
opened yet. Here that was three days later, and it presented as "gearlever is
missing" -- an application that was installed, healthy, and entirely innocent.

Two changes, because there are two failures: it does not recover, and nothing
says so.

The drop-in clears the mountpoint before each start, so an activation that
follows a crash lands on clean ground. ExecStartPre rather than ExecStopPost
precisely because nothing restarts this unit -- the next start is whenever
something next wants it, and that is the moment that has to be safe. `-` because
a clean start has nothing to unmount and fusermount3 exits 1 saying so.
/etc/systemd/user rather than a per-user drop-in so it covers every account, and
change-settings reloads the user manager so it applies without a re-login.

The check asks the mount table whether $XDG_RUNTIME_DIR/doc is mounted
fuse.portal. Deliberately not a service probe, and deliberately not folded into
desktop.portals: that one asks about xdg-desktop-portal, a different service
which was up and healthy throughout. Service state is exactly the question that
lied here, so asking it again in a new place would have been no check at all.
Warning carries a restart repair, verified end to end rather than assumed.

The mount table is injectable, like every other path this script reads, so the
contract covers unmounted, wrong-filesystem-at-the-right-path, and unreadable
against written fixtures rather than against whatever /proc happens to say --
coupling the test to this machine's live flatpak state is the same mistake in
miniature. Stubbing the check to always return ok fails the contract, which was
confirmed rather than hoped.

What is not fixed is the crash itself: one occurrence, and restarting the
service to get the desktop working destroyed the evidence. The exit was 21, it
landed 21 seconds after xdg-desktop-portal restarted, and that is one sample and
not a theory. What this buys is that the next one is a two-second blip the
doctor names, rather than three silent days.

Second time for this bug. ac231ee found the same dead mount in August while
chasing "can't open Bitwarden", fixed it by hand, and recorded it as "not a
config issue, so nothing to commit there". That judgement is why it was paid for
twice, and it is the part most worth writing down.
 2026-08-21 15:26:20 -04:00
Gabriel Brown 89417cd6d4 Take Claude Desktop from the repository that now carries it 
It was `panama app claude-desktop`: a source build, because nothing packaged it.
Upstream publishes an RPM repository now, so the exception shrinks to adding
that repository -- and the result upgrades with `dnf upgrade` along with
everything else instead of needing a slow rebuild every time a version ships.

That moves it out of setup/apps/ and into the third-party section of
install-packages, beside Bun, Claude Code and RustDesk. It also means it is part
of ./install for the first time. The reason it was kept out was the build: slow,
wants the network throughout, and fails on an upstream that moved, which is the
failure the interview exists to prevent. A dnf install is none of those, and the
default dock pins com.anthropic.Claude, so a fresh machine was shipping a pin
for something the install had never put there.

The repository is added with upstream's own setup script rather than a .repo
file written out here. A baseurl copied into this repository is a pin by another
name; the script is the part upstream keeps correct. Both halves are skipped
when already present, so a re-run costs nothing.

The desktop entry id does not change -- it is still com.anthropic.Claude -- so
the dock pin and the notification rules carry over untouched. The new package
drops the nodejs dependency, which is what used to hide the missing-npm bug the
launcher search contract guards; its comment said "depends" in the present
tense and now says what actually happened.
 2026-08-21 14:06:26 -04:00
Gabriel Brown 41b86c7a9e Pin the Claude entry that exists rather than the one that used to 
The dock shipped a pin for claude-desktop, and the application it names has
since been repackaged: the entry is com.anthropic.Claude now, and only the
binary kept the old name. A pin that resolves to nothing does not announce
itself -- the dock simply has one fewer icon than the settings say it should.

Found by the dock pins contract, which exists for exactly this and had been
passing until the application updated underneath it.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 13:56:47 -04:00
Gabriel Brown 185d7edaa5 Open the windows you open together, together 
Arrange the desktop, run "Save Layout as Project" from the launcher, name it.
"Open Project" lays it out again on free workspaces, so it never lands on top of
what you are already doing. Saved layouts are listed on the Desktop settings
page, which is where they are removed.

Recorded rather than written by hand, and a terminal's directory is most of why
it is worth having: without it a project opens three terminals in your home
folder and you change directory three times. This machine had two terminals in
the same project when it was written, and reopening there is the difference
between a layout and a working desktop.

Four things had to be found by running it, none of which reading would have
shown.

A terminal's directory is not the terminal's working directory -- that is where
it was launched from. The shell inside it is what has been cd'd. Reading the
wrong one looked correct for exactly as long as the terminals under test had
been started from the right place, which they had.

gtk-launch cannot place a window. It activates over D-Bus, so the process
Hyprland started exits and a [workspace N silent] rule has nothing left to apply
to; Nautilus landed on whatever workspace was in front of you. The Exec line
from the desktop entry is run directly instead. But DBusActivatable
applications do the same thing regardless, so the window is found afterwards and
moved by address -- which also means a window that never appeared is reported
rather than assumed.

/proc/PID/task/PID/children is a file of pids, not a directory. Listing it as
one always raised, so the fast path was never once taken and everything went
through pgrep.

And kitty's --directory needs an equals sign or the short -d; the
space-separated long form is accepted and silently ignored.

The contract exercises a save and open round trip against a stubbed compositor,
and reads a terminal's directory out of a real process tree rather than grepping
the source for a shell name -- an earlier version passed against a helper that
had been changed back, because the constant was still there.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 13:45:16 -04:00
Gabriel Brown 538c0a887c Save things where the rest of the software already saves them 
Screenshots and recordings offered three folders to choose between, and three
guesses cannot include the folder somebody's other software already writes to --
which is the only folder that matters. This machine has had ~/Pictures/Screenshots
and ~/Videos/Screencasts since long before Panama, and Panama was writing
recordings to a Videos/Recordings it invented. Both are free text now, and the
recording default is the folder that was already there.

Wallpapers were swept from four directories at once, so the distribution's stock
images arrived mixed in with the user's own and there was no way to ask for just
one. Where wallpapers live is something somebody knows about their own machine.
It is a setting, not a search.

All three accept an absolute path as well as one relative to home, which meant
fixing Capture: it prefixed $HOME unconditionally, so naming /mnt/captures would
have written screenshots to ~/mnt/captures and left nobody able to find them.

The generator turned out to skip any entry whose comment sits inside the braces
rather than above them -- it looks for `key:` immediately after `{`. Three
settings were invisible in the reference because of it, one of them dockScreens,
which has never appeared there at all. The staleness contract could not see it
either: regenerating reproduced the same omission, so the copy was current and
incomplete at once. It now counts what was declared against what it could read
and refuses rather than quietly documenting less than exists.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 12:57:47 -04:00
Gabriel Brown 033d5b21f8 Build the launcher's extension on a machine that has only nvm 
The search extension is compiled, and the stage that compiles it checked for npm
and skipped quietly when it found none. On this machine it always found one --
but only because Claude Desktop depends on nodejs and dragged a system npm in.

Nowhere else would. Node moved to nvm when the shell config turned out to have
been assuming it for months, and nvm is a shell function in a file only an
interactive shell sources; a stage is not one. So a fresh install would have set
up the launcher, printed one line about extensions not being built, and left
somebody wondering why typing in it suggested nothing.

The stage sources nvm before looking, and the contract pins that it does --
checking for npm is not the same as being able to find it.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 12:31:34 -04:00
Gabriel Brown 7cd4131327 Hold a key, speak, and the words are typed 
Super+D holds the microphone open, releasing it transcribes on the GPU and
types the result wherever the cursor is. Roughly 150ms for a normal utterance
once the model is resident, measured rather than hoped for.

Getting there meant discarding two approaches. Fedora 44 cannot install any
GPU-capable Whisper for Python -- openai-whisper needs a numba that needs an
llvmlite that does not exist for 3.14, and faster-whisper needs a ctranslate2
nobody packaged. The whisper-cpp package IS built with HIP but ships libraries
with no binary and no bindings, and hand-writing ctypes for a large by-value
struct is a segfault waiting for a version bump. So a container, as suggested.

Vulkan rather than ROCm, and upstream's image rather than one built here. ROCm
is seven gigabytes and serves AMD alone; Vulkan compute runs on the AMD, Intel
and NVIDIA machines this config is used on, in a twentieth of the space. The
Vulkan tag already contains whisper-server, so there is no Containerfile to keep
working -- an earlier draft of this commit had one, and it was strictly worse.

Two bugs found by using it rather than by reading it. Whisper describes silence
as the literal text "[BLANK_AUDIO]", and the first working version pasted that
string into the clipboard; a transcription that is nothing but such markers is
now discarded. And the server answers with a line per segment, which typed into
a window is an Enter press -- sending the half-written message, submitting the
form. Whitespace is collapsed to one line.

Neither the image nor the model is installed by ./install. Together they are
over two gigabytes that want the network, and Settings offers both as one
action instead. Nothing starts at login either: whisper-server holds the model
from the moment it starts, so the first press of the key is what brings it up.

The contract pins both text bugs, that the server stays on loopback, and that it
does not start at login. Reverting the [BLANK_AUDIO] guard did not fail it at
first -- the check was still correct, it had simply stopped being called -- so
it now checks the call site too.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 12:22:19 -04:00
Gabriel Brown b280bd02d7 Let the Home Assistant contract skip a server that is not there 
It already meant to skip when no token was configured, and could not: the helper
exits 2 for any catalog it cannot complete, so `set -e` aborted at the capture
before the skip was reached. The contract failed with no output at all, which
reads as a crash rather than as a skip, and the branch written to prevent that
had never once run.

So the status is taken deliberately, and there are now two skips rather than
one. No token is not a defect in Panama. Neither is a bridge that does not
answer -- off the network, VPN down, the server asleep -- which is the same
reasoning the extras contract already uses for dnf and Flathub being
unreachable.

Only "unreachable" skips, which the helper raises exclusively for a timeout or a
socket error. A bridge that answers and refuses still fails: authentication
rejected, a bad response, a catalog of the wrong shape. Those are what this
contract is for, and all seven paths were exercised against a stubbed helper to
confirm which fail and which do not.

129 contracts pass, with none of them red for a reason nobody intends to fix --
which was the point. A suite expected to be red stops being read.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 02:56:24 -04:00
Gabriel Brown 4c77bc2f61 Decide whether the other screens join in on workspaces 
GNOME's Multitasking panel asked one workspace question worth reproducing, and
it is not which workspace goes on which screen. It is whether the second screen
participates at all: workspaces on the primary display only, or each screen with
its own. Ten rows of per-workspace assignment would be more powerful and worse.

Off is Hyprland's own behaviour and emits nothing. On pins workspaces 1 to 10 --
however many ALT+1..ALT+0 actually reach, read from keybinds.lua rather than
written down twice -- to whichever output is recorded as primary. With no
primary recorded, nothing is pinned: guessing one would move every workspace
onto whichever output happened to sort first, and this machine is in exactly
that state.

Applying is a reload, which is the part that shaped the design. Hyprland reads
workspace rules at config time and will not remove one afterwards -- a rule
written with an empty monitor keeps its old binding, which was checked rather
than assumed. Only a reload clears them, so the config is the only honest source
and the page cannot pretend a change has landed before one happens. Hence a
service that reads `hyprctl workspacerules` back rather than inferring success
from having written the preference, and a Reload row that exists only while the
two disagree.

Verified end to end against the live compositor and put back: off emits nothing,
on emits ten rules naming the primary, and turning it off clears them. The
settings file came back byte-identical.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 02:16:29 -04:00
Gabriel Brown 9092a80f66 Search from the launcher, and give the touchpad something to do 
Four things a Hyprland desktop can do that this one was not.

Searching from the launcher needed no launcher work at all: Vicinae already
models it, so this is a script command with one percent-encoded argument. Make
it the fallback command and anything typed that matches nothing else offers to
search it. Bangs come free -- they are a property of where the query is sent,
not of the launcher -- so !yt reaches YouTube without a line of bang parsing.

Suggestions could not be a script command. They need a view that reacts as you
type, which is an extension: TypeScript, compiled, querying the same endpoint
Firefox's address bar uses. It debounces, and aborts the request in flight on
every keystroke -- typing is faster than the network, and an older answer
landing after a newer one leaves the list describing a query that is no longer
on screen. A bang skips suggestions entirely, because Google has no useful
guesses about "!yt".

The engine is now written down twice, once in each. The contract pins that they
agree, since searching from the fallback and searching from the suggestions
reaching different places is the kind of wrong that looks fine.

Gestures mirror GNOME: three fingers sideways for workspaces, up for the
overview, down to dismiss it. Open and close rather than toggle both ways --
toggling means swiping up from an open overview closes it, which is not what the
fingers meant. Hyprland reads gesture registrations at startup so they cannot be
a setting, but distance and direction can be, and are.

Window swallowing is off by default and a preference like every other misc
setting here. A terminal that vanishes when you did not ask for it is confusing
rather than broken, which is worse.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 01:49:29 -04:00
Gabriel Brown 62dce86b4e Let the prompt survive not being installed yet 
oh-my-posh moved from a curl installer to a Fedora package, and the shell config
invoked it unconditionally. That is fine during a full install, where
install-packages runs before the bashrc is linked -- and not fine in every other
order: a stage re-run by hand, an install that failed partway, or the moment
between removing the old binary and installing the package.

Same guard as the nvm source above it. An unthemed prompt is a worse shell; one
printing command-not-found before every prompt is a machine that looks broken.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 00:45:15 -04:00
Gabriel Brown 725e274ef4 Install the Node this shell config has always assumed 
config/bash/shell sources /etc/profile.d/nvm.sh, switches Node per project from
.nvmrc, and puts PNPM_HOME on PATH. None of it worked on a fresh machine. nvm
was never installed -- it is a Terra package, present here since before Panama
-- and the source was unconditional, so every shell on a new box opened with an
error before it got as far as failing to find nvm.

That is the second instance of the same bug. $HOME/.cargo/env was the first, and
fixing it one file at a time is why this one survived: the dependency contract
scanned setup/scripts, bin and the quickshell helpers, but never config/bash --
the one place in this repository whose entire job is to name tools and source
the files that provide them.

So it scans it now, and checks the shape rather than the instance: a literal
path sourced without testing it exists is a finding, wherever it appears. It
found the nvm line, and authselect behind the fingerprint aliases.

Node and pnpm move to nvm with it. They were declared as dnf packages while the
machine ran them from ~/.nvm, which is not a preference so much as a
contradiction -- a system Node earlier on PATH wins every `nvm use`, so the
per-project switching this shell config sets up could never have worked. nvm
install --lts, then pnpm inside it, so pnpm travels with the Node version it
belongs to instead of outliving it.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 00:30:48 -04:00
Gabriel Brown f09763ef5d Check the two facts the README states about itself 
It claimed 121 contracts when there were 125, one day after the number was
written, and it documented every panama subcommand except the one added last --
so `panama apps` existed and the README did not mention it.

A number in prose is worth something as a claim somebody relies on and nothing
once it is wrong, so it is either checked or it should not be there. This checks
it, counted the way the runner collects the suite rather than by a second idea
of what a contract is, and checks that every subcommand the README documents is
one the dispatcher actually handles -- a listed command that errors reads as a
broken install rather than a stale document.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-21 00:11:04 -04:00
Gabriel Brown 215da285f3 Let applications be chosen a few at a time 
The catalog held fourteen applications. This machine runs thirty-four flatpaks,
so most of what is actually used had no way to be installed from here at all --
Zoom, Slack, Obsidian, Spotify, LibreOffice, OBS and its sixteen plugins.

So the catalog is seeded from the machine, and `panama apps` opens it: pick a
category, tick what you want, install just those. ./install still offers the
same catalog as whole categories, because during a first install you want coarse
and fast. Both read setup/lib/extras-catalog. Two parsers would eventually
disagree about what a category contains, and the one that disagreed quietly
would be the one that runs unattended.

Two pieces of syntax earn their keep. A `| Name` suffix gives the menu something
readable, since com.obsproject.Studio is not a name anybody wants to pick from a
list. An indented line belongs to the entry above it, which is how OBS carries
its plugins as one thing to tick rather than seventeen -- they are extensions of
the flatpak, useless alone.

That is also why creative moved from dnf to Flathub: the plugins attach only to
the flatpak, so the dnf build cannot have them. The rest of the category
followed rather than leave one machine with GIMP from dnf and its neighbour from
Flathub.

The contract now reads the catalog through the same parser instead of keeping a
third idea of the format, and checks the two things this syntax can break
silently: a label leaking into an install command, and a bundle that installs
the application without its plugins. It caught a typo in the Pixelorama id on
the first run.

It also got slow enough to be worth fixing -- fifty-one names, each its own
network call. One bulk query per manager took it from minutes to four seconds.
That query needs `flatpak remote-ls --all`: without it, end-of-life applications
are hidden and read as missing, which reported yuzu as gone from Flathub when it
installs perfectly well.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 23:58:36 -04:00
Gabriel Brown 48f7c1e962 Name the Gaming page, and stop the docs inventing names 
The settings reference is generated, and a contract already fails when the
committed copy is stale -- so it was current. It was also wrong: the Gaming page
was documented as "Found on **gaming**" while every other group named a real
page, because a routed page with no entry in PAGE_TITLES fell back to printing
its own id.

The staleness contract could not see it. Regenerating reproduced the same wrong
file, so the copy was current and wrong at the same time -- a check that compares
output against itself cannot catch a generator that is confidently mistaken.

So the fallback is gone. A routed page with no title now refuses to render and
says which page needs one, which is what makes the next page added here
impossible to miss.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 23:32:46 -04:00
Gabriel Brown f457c1eb9f Build the two applications nobody packages, on purpose rather than in passing 
Claude Desktop and ChatGPT Desktop ship for macOS and Windows. The Linux path for
both is a community wrapper that converts the official build into an RPM -- so
what lands is still a package dnf owns and can remove, which is the part of the
dnf/flatpak rule that actually matters. What they need an exception for is the
build itself, and there is no packaged form to prefer over it.

`panama app` builds one by name, and is deliberately not part of ./install. A
source build is slow, wants the network throughout, and depends on an upstream
that moves -- twenty minutes in, an error, with nobody at the keyboard, which is
the exact failure the interview exists to prevent. Asking for one is something
you do on purpose, and it is also the rebuild path when a new version ships.

Nothing is pinned. Each build takes the current default branch and the current
upstream release, and reports a failure rather than working around it, leaving
the tree where the error can be read. sunhat pinned versions and every pin was a
404 within a release cycle.

Adding one is adding a file to setup/apps/, and the file has to say why the
exception exists -- the contract fails a definition that does not, because the
guard against this list growing by habit is having to write the reason down.
sunhat had seventy-odd installers and a reason recorded for none of them.

The contract had a bug worth recording: `while read` on the right of a pipe runs
in a subshell, so two of its three per-definition checks recorded findings into
an array that went out of scope at the end of the loop. It reported PASS on a
definition with no description and no build function. Found by standing one in
deliberately and noticing only the third check spoke up.

Also: nautilus-open-any-terminal is now declared, and Panama's copy of the
extension is gone. Fedora packages that extension AND its gsettings schema, and
Panama shipped its own fork of the .py over the same path while declaring
neither -- so a fresh machine got an extension whose schema did not exist. It
worked here only because the RPM has been installed since sunhat. The fork was
also 63 lines behind the packaged version, missing its newer Nautilus and Caja
handling.

Auditing the rest of config/copy for the same shape found nothing else: dnf.conf
is a config file its package expects to be replaced, and the GPU udev rules are
Panama's own.

125 contracts pass.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 23:00:21 -04:00
Gabriel Brown d61792433c Merge the Panama roadmap completion work 
Six commits, rebased onto main and integrated with where main had moved in the
sixty-two commits since the branch was cut.

What lands: a theme-profile system, so a curated accent and a saved custom theme
become the same kind of record; a dock context menu; contextual Settings routes
from the dock, notifications and the OSD; overview-thumbnail capture reliability;
and wallpaper and lock-screen hardening -- which needed the shipped wallpaper
that the fresh-install work made exist, and was the dependency that kept this
branch parked.

Where main had moved further along the same path, main won: the focused border
driven by the chosen accent, the gradient built through the shared serializer,
the multi-edge dock. The branch's work sits on top of those. The one thing that
had to be carried across by hand was the `gnome` member on each accent, which is
what recolors libadwaita applications; it moved into the curated table rather
than being lost with the table it replaced.

One behaviour change worth knowing: the OSD now accepts pointer input, where it
previously accepted none. A secondary click on a visible OSD opens its settings,
and a Wayland region cannot admit one button and refuse another. The region stays
bounded to the OSD's own card.

124 contracts pass.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 22:36:41 -04:00
Gabriel Brown 6016efa436 Meet main where it has moved since this branch was written 
The rebase itself is the previous five commits replayed onto main; this is what
they needed once they landed there, kept separate so the replay stays readable.

The shell did not start. A Column in this branch's notification settings menu
assigned its own implicitWidth and implicitHeight, which a Qt 6 positioner
computes and does not let you set. That took out every contract that launches a
shell -- six of the seven failures were this one line, and none of them said so
until the error was read to the bottom. A Column already measures itself from its
children, so the bindings are simply gone.

Three assertions pinned an implementation main has since replaced, and each is
updated to pin the intent rather than the mechanism:

  - The display picker now reads primaryFirstMonitors, which is monitors sorted
    with the primary first. Still populated from what is connected, which is what
    the contract is for; the sorted list is the point, so the picker opens on the
    display somebody is most likely to mean. This branch made that change and
    broke its own contract without noticing.
  - The accent swatches come from the accentName schema rather than
    Object.keys(Theme.accents). Same swatches, same order, one source shared with
    every other enum row.
  - The OSD used to take no pointer input at all. It takes some now, because this
    branch's own design calls for a secondary click on a visible OSD to open its
    settings, and a Wayland input region cannot admit one button and refuse
    another. The rule that survives is that the region stays bounded to the OSD's
    own card: it floats over other windows for a couple of seconds, and a region
    bigger than the card would swallow clicks meant for something underneath.

Theme's accent table moved to ThemeProfiles, which is this branch's point -- a
curated accent and a custom profile become the same kind of record. main had
meanwhile given each accent a `gnome` member, the nearest name in GNOME's fixed
accent-color enum, which is what makes libadwaita applications recolor instead of
staying in GNOME blue. That member moved into the curated table rather than being
dropped, and adwaita-accent-contract now reads it where it lives.

Where main had simply moved further along the same path, main won: the focused
border driven by the chosen accent rather than a hardcoded pair, the gradient
built through the shared serializer rather than a hand-rolled string, the
multi-edge dock geometry. This branch's context menu, keyboard focus and
accessibility work sit on top of those rather than beside them.

Three new contracts arrived carrying .sh and lost it, along with the references
in this branch's own plan.

124 contracts pass.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 22:23:27 -04:00
Gabriel Brown ed428e87c4 Complete the Panama theme system 2026-08-20 22:03:08 -04:00
Gabriel Brown 69ecec7ecf Complete contextual desktop controls 2026-08-20 22:00:53 -04:00
Gabriel Brown a90f6eb357 Fix wallpaper scan cap exit status 2026-08-20 22:00:26 -04:00
Gabriel Brown c4642919f7 Close desktop safety gaps 2026-08-20 22:00:26 -04:00
Gabriel Brown c4733e0624 Plan Panama roadmap completion 2026-08-20 21:58:25 -04:00
Gabriel Brown e1faaf7a76 Drop the extension, and give the test suite a front door 
Phase 6, the last of the fresh-install spec.

159 scripts lose their .sh: 110 contracts, 47 Vicinae commands, 2 compositor
contracts. A shebang and the executable bit already select the interpreter. The
extension only ever added something that had to stay in sync, and the rename
proved the point twice over in the space of an hour.

The spec's stated risk was Vicinae's script discovery. One script was renamed and
reloaded on its own before the other 46 followed; it came back as
scripts:panama.capture and all 47 resolve. What the probe turned up instead is
that the extension was never only a filename: Vicinae's command IDs embed it, so
every ID changed. Nothing in this repository refers to them, so nothing breaks.
The only trace is Vicinae's metadata.json, whose visited map had two Panama
entries that are now orphaned -- two commands lost their usage ranking and will
earn it back. Worth knowing before anyone renames these again on a machine that
has a keybind pointing at one.

Rewriting the references by exact filename missed two things it structurally
could not see: a name built from a variable, settings-$page.sh, and a glob,
-name '*.sh'. Both were in the contract that counts the generated commands, which
promptly reported 47 expected and 0 found. The mechanical part of a rename is the
part that looks finished.

The three subcommands. panama doctor fronts a health check that already existed
and already ran at the end of every install but could not be reached from a
terminal. panama upgrade re-runs the installer from anywhere. panama test runs
the suite, which had no entry point at all -- 121 files that were the main safety
net in this repository and were invisible in it.

Writing that runner found three tests nothing was running.
calendar_agenda_bridge_test, home_assistant_bridge_test and kdeconnect_bridge_test
are unittest suites without the executable bit, so no contract invoked them and
the first draft of the runner skipped them silently. All three pass, and have
passed unobserved for weeks. The runner collects *_test.py as well now, because a
runner with a blind spot is worse than no runner for the same reason a dependency
checker with one is: it reports PASS.

Six worktrees pruned. Each was re-checked rather than trusted to the spec's list,
and two needed it: panama-commands is not on feat/panama-commands but on
feat/gnome-tweaks-parity, and fix/panama-displays-review reads [ahead 3] -- ahead
of its remote, not of main, with every commit patch-equivalent to landed work.
roadmap-completion stays; it has five commits that are genuinely unlanded. The
branches are left alone: pruning a worktree costs nothing, deleting a branch is a
decision.

121 contracts pass.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 21:55:55 -04:00
Gabriel Brown 47f29f9fa9 Stop describing a desktop this repository does not install 
Phase 5. The README advertised two desktops that coexist -- GNOME with Forge,
Dash-to-Dock, Openbar and Vitals, alongside Hyprland -- and nothing in setup/
installed or configured any of the first one. Panama configures one desktop, and
now says so.

config/dot/forge is deleted along with its entry in link-dotfiles. It was the
hedge from when the GNOME session was still the fallback and Hyprland was being
built beside it; the hedge has been paid off. Nine files, six of which were
Forge's own editor backups that should never have been committed.

Searching for the rest of GNOME found nothing else to cut, which is recorded in
the spec so nobody goes looking again. change-settings never enabled an
extension. The mentions of Dash-to-Dock, Openbar and Vitals through the shell are
comments saying what a component was modelled on -- which intellihide behaviour
the dock reproduces, where a colour came from -- and DESKTOP-PARITY.md is the
table of what replaced what. That is provenance, and it is the reason those
components behave the way they do. Vitals in services/ is Panama's own bar
service and merely shares a name with the extension it replaced.

The handoff panel list was wrong in two places. It named Wacom, which nothing
hands off to, and Region, which is a subpage of System rather than a panel. The
nine real ones are read off the call sites and the allow-list that gates them.
The spec said it, the comment on gnome-control-center repeated it, and the README
would have made it three.

One test gap turned up and is closed. The assets contract caught a directory
under config/dot/ that nothing links, but not the inverse: a name left in the
dirs array with nothing behind it, which makes link-dotfiles point ~/.config/<name>
at a path that does not exist. Deleting Forge is the exact move that introduces
that, and nothing would have failed if the array entry had been left. A dangling
symlink is worse than a missing one, because everything that looks there finds
something. Verified by putting the entry back and watching it fail.

The audit of docs/settings.md this phase asked for needed nothing: it is generated
from PreferenceSchema.qml, a contract already fails when it goes stale, and it
carries no claim about GNOME or Forge. The README gained the section it was
missing instead -- the 121 contracts under tests/ were the main safety net in this
repository and went entirely unmentioned in it.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 21:33:57 -04:00
Gabriel Brown 88497826ec Let a machine say what it is for, and give Firefox its face back 
Phase 4: the optional application categories, and the Firefox chrome.

Everything Panama installed until now was what every machine gets, which meant a
work laptop acquired emulators and a desktop that wanted Steam had to be told
about it by hand. The interview now offers the categories in
setup/packages/extras/ as a checklist -- gaming, creative, communication,
virtualization -- and nothing is preselected, because a default here installs
applications nobody chose on a machine whose owner answered a question they
thought was about something else.

A category is one file, and a category mixes both package managers because the
applications do: Steam is in RPM Fusion, Slack publishes only a flatpak. So a
bare line is a dnf package and a flatpak: line is a Flathub ID, and one file
holds the whole answer rather than splitting each category across two. The menu
is read from the directory rather than written down, so adding a category is
adding a file. Every name in all four was resolved against the actual
repositories before being written down, and the contract re-resolves them --
the point of admitting applications one at a time is that they stay installable,
and a typo here fails on somebody else's machine, not this one.

Firefox is declared, and its chrome is Edge-Frfox, vendored into config/firefox.
sunhat carried that theme with no license and no attribution; it is MIT, and now
it says so and says whose it is.

It is the only piece of Panama's configuration that does not go to a path this
repository chooses. Firefox owns the profile directory, names it with a random
salt, and does not create one until the browser has been run -- so link-dotfiles
finds or creates a profile and links both halves into it. Both, or neither works:
chrome/ is the CSS and user.js sets the preference that makes Firefox read chrome/
at all, without which the theme is a directory of dead files.

Two assumptions there were wrong, and the contract exists for both. Firefox has
moved to the XDG directories -- the profile root is ~/.config/mozilla/firefox on
this build, not ~/.mozilla/firefox, and writing to the wrong one themes nothing
and says nothing about it. And -CreateProfile turns out to be non-interactive, so
a fresh machine gets the theme on the first install rather than the second. The
contract runs link-dotfiles for real against a throwaway home with no profile in
it and looks at what came out; it was checked by pointing the search at the
legacy path only and watching it fail.

Also: the enrolment/enrollment spellings from the last commit are corrected. This
repository is US-spelled everywhere else -- color 1131 times against colour never
-- and consistency in prose is worth as much as it is in code.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 21:24:15 -04:00
Gabriel Brown b319d1a5e1 Stop handing dnf the comments that explain the package lists 
Every list in setup/packages/ is annotated -- which package exists for which
settings page, why an exception was made -- and install-packages passed the whole
file to dnf, comment lines included.

dnf does not ignore an argument it cannot match. It reports "No match for
argument: #" and exits 1, and with set -euo pipefail at the top of that script
the first annotated list ends the stage. initial-packages carries four comments
and is the first list read, so a fresh machine got the repositories, the group
updates, and then nothing.

Two things hid it. On a machine that already has everything, a re-run matches
every real name and fails only on the comments, so the failure looks like noise
rather than the stage dying. And every contract that reads these lists strips
comments with sed before comparing -- the tests were reading a file the installer
was not, which is why a repository with a dependency contract, an assets contract
and a doctor still reported PASS across the board.

The fix is one filter used at all five call sites. The contract lifts that filter
out of the script and runs it, rather than describing what it should do, so
deleting or renaming it fails here instead of passing quietly. It also checks the
inverse -- that stripping comments does not strip packages -- because trading a
loud failure for a silent one would be worse than the bug.

Found while adding the extras lists for phase 4, which are annotated the same way
and would have hit the same wall.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 21:11:44 -04:00
Gabriel Brown 13f3648e4d Install the driver, enrol the key, and still never ask twice 
Phase 3 of the fresh-install spec: the parts of a run that depend on what the
machine actually is. NVIDIA, Secure Boot, Fedora's preinstalled extras, firmware.

Two of these looked like they would force a compromise, and neither did.

sunhat opened an editor in the middle of its run so grub could be hand-corrected,
and that single step is why walking away from an install did not work. The step
existed to delete duplicated kernel arguments -- and grubby replaces an argument
that already exists rather than appending a second copy, so the duplicates cannot
accumulate and there is nothing to correct. The editor was load-bearing for a
problem that a different tool does not have.

MOK enrolment needs a password now and the same password at the next boot's blue
screen, which reads like a prompt that has to happen mid-run. mokutil has
--generate-hash and --hash-file for exactly this: the interview asks, hashes it
on the spot, and records only the hash. The plaintext never reaches the answers
file, the environment, or a command line, and the stage runs without asking.

The stage runs last rather than fourth as the spec's table had it. The constraint
was always "late" and fourth of eight is not late: enrolment arms a prompt for the
next boot and firmware may want a reboot, so a machine that reboots out of this
stage should already be completely configured.

Every question names what was found -- the card, the packages actually installed
-- and is not asked at all on a machine it would do nothing to. sunhat's debloat
list no longer describes Fedora 44: totem became showtime and LibreOffice is not
preinstalled, so the list is curated and a package that is not installed is never
passed to dnf, which is what lets it outlive a release.

This stage cannot be verified by running it. It installs a proprietary driver and
queues a Secure Boot enrolment, and this machine is an AMD desktop. So every
privileged command is stood in on PATH and the contract asserts which answer led
to which call: that no answers means no commands, that a failed driver install is
not followed by arguments and services for a driver that is not there, that the
hash reaches mokutil through a file and never a command line, and that removal is
offered only for packages that are installed. The contract was checked by breaking
the stage three ways and confirming it caught each. It does not verify that
akmod-nvidia builds, and says so where a reader would otherwise assume it did.

The README's stage table listed three of seven stages; the interview and identity
work never reached it. Corrected rather than extended, since a table that lists
three of seven is worse than one that lists none. The Desktops section still
describes a GNOME session nothing installs -- that is phase 5.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 19:36:53 -04:00
Gabriel Brown 359fb922aa Install the four applications this desktop assumed you had 
Helium was already declared. Podman Desktop is on Flathub, so it joins the
flatpak list beside the podman it fronts.

RustDesk was the interesting one. panama-doctor has checked `rustdesk.service`
for as long as it has existed, and autostart.lua works around the tray that
service spawns -- so RustDesk was already part of this desktop, installed by
nothing. The flatpak cannot register a root-owned system service, so unattended
access needs the RPM.

Claude Code has no RPM and no flatpak either, so it takes the official installer
and keeps itself updated afterwards.

Neither pins a version. sunhat pinned upscayl 2.11.5, LACT 0.5.4 and a fedora-40
RPM, and every one of those was a 404 within a release cycle; the RustDesk URL is
resolved from whatever the latest release happens to be. Both are skipped when
already present, and a failure is logged and stepped over rather than aborting a
stage that has already installed the desktop.

That leaves three exceptions to the dnf-or-flatpak rule, all named in one place
with a reason each. The dependency contract now knows they are installed out of
band, so probing for them with `command -v` is not read as an undeclared
dependency -- narrowly, per command, so a genuine omission still fails.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 19:25:30 -04:00
Gabriel Brown b6448c9876 Give the revealed Dock back the pointer that revealed it 
The bottom dock came up when the cursor reached the edge and hid again a
quarter-second later with the cursor still sitting there.

The input region has two shapes: a three-pixel strip along the whole edge while
hidden, and a region over the body once revealed. Teaching the dock about left
and right rewrote both, and the bottom case was folded into the branch that
serves a left dock -- x 0. That is right for a dock that hugs the left edge and
wrong for one that is centred on the bottom: the region landed on the left third
of the screen while the pointer that summoned the dock was in the middle. Hover
dropped on the very frame the dock arrived, and the hide timer did the rest.
Approaching from the far left worked, which is the only reason it looked
intermittent rather than broken.

Bottom is centred, so the region starts where the body starts.

Nothing measured the input region, which is why "bottom is unchanged" passed
while bottom was broken -- the contract read the window and the window was
fine. It now probes the mask in both states on all three edges and asserts the
point a hand actually aims at, the middle of the edge the dock lives on, is
still inside the region after the dock arrives. It fails on the old binding
with the coordinates that were wrong.

Claude-Session: https://claude.ai/code/session_01NvgBuSWB5sE43yWmg21ozj
 2026-08-20 19:23:02 -04:00
Gabriel Brown 15d54b16f6 Ask everything first, then run without needing anybody 
sunhat's failure mode was a question twenty minutes into a run. Walking away
from an install meant coming back to a prompt that had been waiting an hour.

So the questions move to the front. A new interview stage asks what Panama needs
to be told -- hostname, git identity, whether to sign in to GitHub, whether to
make an SSH key -- shows the answers back, and asks once to proceed. After that
nothing asks again. gum is bootstrapped before it runs, because the interview is
built on gum and gum arrives with a stage that has not run yet.

Answers reach the stages through a mktemp file that install sources and the
existing trap deletes, since a child process cannot export into its siblings.
They are not remembered between runs: there is no state file to go stale, and
one of the answers is an email address.

The interview asks only what a stage in this repository actually consumes.
Extras, hardware and debloat questions arrive with the stages that act on them
-- a prompt whose answer nothing reads is a control that lies. The new contract
pins that in both directions, and four deliberate mutations confirmed it catches
a question nobody reads, a stage reading something nobody asks, an answers file
left on disk, and a declined interview that fails to stop the run.

The run now ends with panama-doctor, because a failed-stage count says nothing
about a service that did not start. It never changes the exit code: on a fresh
machine, unconfigured is the honest answer, not a failure.

espanso and oh-my-posh stop being exceptions -- Terra packages espanso-wayland
and Fedora packages oh-my-posh, so the curl installer is gone. bun is now the
only remaining one.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 19:22:36 -04:00
Gabriel Brown 96e4085919 Install the desktop this repository already describes 
The shell named a font, a pointer theme and a wallpaper that no package list
installed and no stage placed. It went unnoticed because this machine collected
all three under sunhat and never lost them; a fresh Fedora box would have come
up with tofu for every shell glyph, the default pointer, and no wallpaper --
while Wallpaper.qml called that missing file `shippedPath`.

The dependency contract reported PASS throughout, because it reads commands that
scripts invoke and none of these are one. The new assets contract covers what it
structurally cannot: fonts and pointer themes named in configs and gsettings, a
shipped wallpaper that must exist, commands launched from QML, and directories
nothing puts into service. Written against the broken tree first, where it found
ten faults.

Four of those were packages nobody had noticed were missing -- gnome-calendar,
podman, pipewire-utils and flatpak -- alongside gnome-control-center, which backs
fifteen rows of Panama's own Settings and is commented so it is not mistaken for
GNOME-session residue later.

Fonts turned out to need no install stage at all. Terra, which install-packages
already enables, packages every Nerd Font, so sunhat's wget-and-unzip is replaced
by five lines in a package list. The pointer theme had no such luck: it is
packaged nowhere, so it is vendored rather than downloaded from a URL that can
rot.

espanso stays undeclared. It is in no enabled repository, and building it from
source is the install method this repository is trying to stop using.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 18:57:47 -04:00
Gabriel Brown 6bcc351e07 Write down what a fresh install actually lacks 
Panama installs a desktop it does not fully provision. The shell names fonts
nothing installs, a cursor theme nothing installs, and a wallpaper that does not
exist; five packages that settings pages depend on are declared nowhere. None of
it shows here, because this machine accumulated those pieces under sunhat and
never lost them.

The spec covers closing that gap, moving every question the installer needs to
the front of the run, and porting the parts of sunhat that still matter.

Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
 2026-08-20 18:38:50 -04:00
Gabriel Brown 3b01f1e020 Let the Dock choose an edge, choose its screens, and be dragged into order 
Three things that were parked, and the reasons they were parked turned out to be
the useful part of doing them.

The Dock can sit on the left or the right as well as the bottom. Everything that
assumed the bottom edge is now asked which edge it is on: the anchors, the axis
that gets an implicit size, the sliver of input region that survives hiding, the
direction the body slides away in, and which side a tooltip opens towards. The
body was a Row and is a Grid, because one declaration then serves both
orientations -- Row and Column would each need their own children, and the
cross-axis anchors that centre items in a Row are the wrong axis in a Column.

Bottom is unchanged in every particular, and the settings default to it, so a
hot reload in the middle of this work left the running dock exactly where it
was.

One bug worth recording because static review would never have found it: a dock
spans the edge it lives on, which means anchoring BOTH ends of that edge. The
first side dock anchored top and left only, was free to collapse to its implicit
height, and came out one pixel tall. It parsed, it loaded, and it rendered
nothing. The contract measures the geometry rather than reading the source for
that reason, and was verified by putting the single-ended anchor back.

Per-screen is a list of names where empty means every screen, because a list is
what goes stale when a display is unplugged and "all" should not be spelled as
one. Turning off the last screen collapses to "all" rather than leaving no dock
anywhere and no obvious way back.

Pins can be dragged by a grip. The objection this file recorded for a long time
was real -- dragging inside a Flickable inside a scrolling page fails in a way
that reads as breakage -- and the answer is preventStealing on the grip, so the
page cannot claim a gesture that started there. The arrow buttons stay: they are
the keyboard-reachable path and a grip is not. The order is held locally during
the drag and written once on release, rather than rewriting settings.json for
every slot crossed.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 14:10:22 -04:00
Gabriel Brown 23141673a2 Hang the Control Center where every other popover hangs 
Five surfaces sat 12 pixels under the bar -- the date menu, the activity panel,
notification toasts, signal glass and the clipboard, all using barGap * 2. The
Control Center sat at 2, through a constant of its own, which left the widest
surface in the shell hanging ten pixels higher than the date menu beside it.

That constant arrived with the original Control Center and carried no reason,
while barGap directly above it explains itself. The clipboard even cites
QuickSettings in a comment for how it derived its own margin, and still landed
on 12. It reads as an early value nothing else converged on rather than a
decision, which is why it is going rather than being documented and kept.

The contract that guarded it pinned the literal, and that same file already
records where pinning a literal led: it once asserted the buggy margin
expression, so the code and the test agreed and a 38-pixel gap was invisible to
both. Replacing one number with another would have repeated it. It now reads the
top margin out of the Control Center and out of the date menu and requires them
to match, so drift in either direction fails -- verified by moving each one in
turn and watching it break.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 13:41:12 -04:00
Gabriel Brown 495fb9b41b Give each online account its provider's icon 
Four accounts distinguished only by a line of small grey text are four rows that
have to be read rather than recognised. GOA already knows what each one is.

It hands back a serialised GThemedIcon -- ". GThemedIcon goa-account-google
goa-account goa …" -- a preference-ordered fallback chain. The helper passes the
whole chain on rather than resolving it, because which of those names exists is
a property of the icon theme in use and not something a python script talking to
D-Bus should be deciding.

The page walks the chain and takes the first name the active theme actually has.
Both simpler readings were wrong and looked right: taking the first name blindly
assumes it resolves, and taking the last as a fallback assumes the most generic
name is the most likely to exist. On Adwaita the tails of these very chains --
"mail", "goa-symbolic" -- do not exist at all, so a miss would have drawn
nothing. Checked by asking Quickshell.iconPath directly, which returns empty for
a name the theme lacks; the fallback is avatar-default-symbolic, which is
present.

SettingsCard grew an optional icon for this. It is empty by default and the
header lays out exactly as before when unset, so no other card moves.

Last-sync is not here because there is nothing to show: GOA exposes no
sync-related property at all, on any of these accounts. Better to say so than to
invent a timestamp from when the page last refreshed.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 13:28:05 -04:00
Gabriel Brown 3b657e0a56 Make the resize keys do what the fingers expect 
Audited against the real Forge configuration rather than its defaults: the
bindings are still in dconf, and the extension is still installed, so both the
keys and the code behind them could be read directly.

The port was faithful. Forge's resize() grows the window for a positive amount
in every direction -- the edge only decides which side moves -- so
"increase" meant grow and "decrease" meant shrink, and Y/O/I/U mapped to Wider
and Taller exactly as they should have.

What did not survive is direction. Forge resized one named EDGE: Y pulled the
left edge leftward, O pushed the right edge rightward, and the window opened
from the side you asked for. Hyprland resizes along an axis and lets the layout
pick the border, so eight distinct behaviours collapse onto four and the
direction is not expressible at all in dwindle. Correct on paper, wrong under
the hands: the keys that used to pull a window open from one side now push it
from the other, which reads as the pair being swapped.

So the sizes are inverted from Forge's naming on purpose. Y and O shrink, B and
M grow, I and U shorten, N and Comma lengthen. Faithfulness to a mapping nobody
can feel is worth less than keys that behave the way their owner reaches for
them, and the reason is written where the next person will find it.

Also fixes the Home Assistant accessories dropdown, which looked glitchy for a
reason that was not performance. The resting card hid the instant the section
opened -- a Column skips invisible children, so everything above snapped up
while the expanded grid was still sliding open underneath. It now collapses on
the same curve and duration as the section replacing it. This was the only
control with a resting and an expanded form that swap, which is why it was the
only one that looked wrong.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 13:10:17 -04:00
Gabriel Brown c148bae4ac Let Ethernet be switched off and on 
Wi-Fi had a switch and wired did not, which left no way to take the cable down
without reaching for nmcli -- and this machine has two interfaces on one subnet,
so turning one off is a genuinely useful thing to be able to do.

Both halves are needed to turn it off. Disconnecting alone survives the session
but not a carrier event or a reboot, because NetworkManager brings an
autoconnecting device straight back; the switch sets the device's autoconnect
alongside it. The device property rather than the connection profile, so a
toggle here does not quietly rewrite a saved connection somebody expects to come
up at boot.

The first version built a trap door. It decided whether the switch was usable
from hasLink, which reads false while a device is merely disconnected even
though NetworkManager still reports the carrier as on -- so turning Ethernet off
made the switch disable itself, blame the cable, and offer no way back. A wired
device that exists can always be asked to come up; if there is really no cable
the attempt fails and says so, which is the honest failure. The word "off" is
used where the old text guessed "no cable", because nothing available here can
tell those apart.

Verified as a round trip against the real device, including that off stays off
through eight seconds rather than reconnecting a moment later, and that the
mechanism tested is the one the code uses -- the first test drove the connection
profile while the code drives the device, which are different things.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 12:13:49 -04:00
Gabriel Brown 4cbab01ae2 Show what has actually been installed 
Automatic updates leave no other trace. The Flatpak that sat here as "1 update
available" installed itself at 00:14 this morning and nothing on the machine
would have said so.

Both sources are asked in their own machine-readable form and merged on time, so
the answer reads as one history rather than two lists to interleave by eye.

Two parsing traps worth recording next to the code. flatpak's --json prints
timestamps as "Aug 20 08:07:46" with no year in them, so the year is inferred
and a date that would land in the future is read as last year's. And dnf5's
start_time is epoch UTC while its own history table prints that same value as
though it were local -- checked against rpm, and the local rendering here is the
correct one.

The contract asserts entries are newest first, that none is dated in the future,
and that both sources parse; it was verified to fail by breaking the year
inference so every flatpak entry landed tomorrow.

Loaded on demand rather than with the page, because it reads both full
transaction logs.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 11:30:31 -04:00
Gabriel Brown de45f205ad Carry settings between machines by allow-list, not by stripping 
panama-settings-backup already snapshots this machine so it can be put back
exactly as it was, arrangement and all. This is the other thing: an export meant
to travel, carrying the preferences that describe taste rather than hardware.

The export is an allow-list read from the preference schema rather than a
deny-list of things to remove. A key added later that happens to hold a token
cannot leak into a file somebody emails to themselves; being wrong in this
direction loses a setting, being wrong the other way publishes a secret. It
earned that immediately -- this machine's store holds an orphaned shadowOffset
from a setting that no longer exists anywhere in the source, and it was left
behind without anyone having to know about it.

Three settings stay: the display arrangement, which is keyed by output names
that mean nothing elsewhere; the last page opened, which is session noise; and
schemaVersion, which belongs to the store rather than to a person. Import is a
merge, so settings a file does not mention are left alone, and it is idempotent.

Two bugs made and caught here, in opposite directions. Validation missed 36
settings because "real" was spelled "float" and enums fell through entirely, so
an out-of-range or nonsense value would have been written straight into the
store. Correcting that then broke numeric enums -- vrrPolicy is an enum of 0..3
and the options were read with a regex that only matched quoted values, so those
settings had no known choices, were declared unverifiable and were refused:
valid settings dropped silently in transit.

The contract could not see the second one. It checked only that bad values are
refused, and when numeric enums were unreadable they never reached the bundle at
all, so every "did it arrive" assertion was satisfied by their absence. It now
requires the export to carry what it should as well as withhold what it should
not, and was verified to fail in both directions.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 11:02:42 -04:00
Gabriel Brown 52e2a83a78 Add an SSH Keys page, and refuse the one control that would lie 
The page shows which keys exist, what the agent is holding, and the hosts this
machine has met, with a two-press forget for a host whose key has changed.

Nothing here reads private key material. Fingerprints and comments come from the
.pub file, and "does this key need a passphrase" is answered by asking
ssh-keygen to derive the public half with an empty one -- it succeeds for an
unencrypted key and fails for an encrypted one, and either way the only thing it
can emit is public. The contract checks that against the payload that actually
reaches the page rather than against the source, because what the code intends
and what it ships are different claims.

Unloading a key from the agent is refused, with its reason. On this desktop
`ssh-add -d` prints "Identity removed" and the key is still offered a second
later: gnome-keyring's agent lists every key it finds in ~/.ssh, so a removed
one comes straight back off disk. That was measured rather than assumed -- a
plain ssh-agent removes durably, this one does not -- and a button reporting
success while changing nothing is worse than no button. The page says so and
names the thing that does work: move the file out of ~/.ssh.

SSH_AUTH_SOCK is not set in a normal shell here, so a naive check reports "no
agent" while one is plainly running. The helper falls back to the keyring
socket, and an agent started by hand still wins. That gap is the same one that
made reaching these servers awkward in the first place.

Generating a key is deliberately absent. A passphrase cannot reach ssh-keygen
without going somewhere it should not -- -N puts it in argv, which every process
on the machine can read -- and driving the prompt over a pty did not work.
Offering to generate an unencrypted key instead would be a downgrade dressed as
a feature, so the page does not offer to generate at all.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 10:17:33 -04:00
Gabriel Brown 79b3d5cb85 Close the sweep's last blind spot, and stop shortcuts silently colliding 
gapsIn and gapsOut were the only two compositor settings the write sweep had
never verified: Hyprland answers for them in CSS shorthand, "5 5 5 5", and the
sweep had no way to compare that. The preference behind each is a single int
that Hyprland expands to four sides, so a uniform reading compares exactly. A
non-uniform one is not something the preference can express, and is skipped
rather than collapsed to a number it never wrote. 63 of 63 verified live now,
none skipped.

Wallpaper thumbnails are cached. The report that five of them sat at "Loading…"
was a screenshot taken 1.1 seconds after the page opened -- decoding one of
these at tile size takes between 1.2 and 2.6 seconds and about ten start at
once, which the code already said. Measuring it did turn up something real
though: without a cache, scrolling back up pays that decode again for every
tile. The tradeoff is a wallpaper replaced in place showing a stale thumbnail
until restart, which is worth it for a directory of files that are added rather
than edited.

A chord already in use is now named rather than taken: "Super+Q is already
Terminal". Two actions on one chord means whichever Hyprland reads last wins,
which is not a thing to find out later by pressing it. Rebinding a shortcut to
the chord it already holds is correctly not a conflict.

Also: Open Appearance lands on the Windows tab now that the page has tabs,
Storage points at reclaimable container space, and a dock row shows its desktop
id only when two pinned applications share a name -- it is developer text, and
repeating it under fifteen recognisable names made the list harder to scan.

Written down because it cost the shell: QML has no default parameter values, and
`function openSettings(page: string, section: string = "")` fails the entire
configuration rather than the one function -- so the bar and dock went with it,
and 43 contracts failed at once pointing at the same line. qmllint --bare passes
that, which is why the usual check before touching the running shell did not
catch it. openSettingsSection exists as a separate function for that reason.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 09:56:02 -04:00
Gabriel Brown 1b845c0126 Rebuild Home around what this desktop already knows 
Home led with a diagram of the attached monitor -- DP-2, 4500 x 3000, 1.13x
scale, XRGB2101010 -- which is Displays-page data, was the largest thing on the
screen, and has never been needed there. Under it sat a permanently open search
field for a weather location that is set about once a year, and then roughly
half a page of nothing.

It now opens with the two or three things somebody would open Home to do:
starting or ending a focus session, Do Not Disturb, and what is running. The Do
Not Disturb switch is disabled and says why while a mode is holding it, so it
cannot appear to be a control that is being ignored.

Findings sit above a reassurance line, the same shape the Firewall and
Containers pages use. Each finding names the page that can resolve it, because a
home page reporting a problem it cannot help with is only an alarm. On this
machine that is one finding today -- PostgreSQL and Redis reachable from the
network -- above "27 health checks pass, 522 GB free, snapshots ran at 02:00".
"Do next" appears only when there is something in it.

Weather stays, as the greeting's second line rather than a card with a search
box open, and its picker is collapsed behind the current location.

FocusModes was missing `import qs.config`, so DesktopPreferences was undefined
and the modes list came back undefined with it -- shipped two commits ago with
nothing noticing, because until Home referenced the service no isolated shell
had ever instantiated it. Focus modes would have quietly had no modes. Pulling
these services together on one page is what surfaced it.

LocationPicker gained a picked signal, the same way DisplayModePicker did, so a
container can put the search away without reaching into it.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 09:15:01 -04:00
Gabriel Brown f53ca16392 Make the focus exception list real, or it was a page telling a lie 
The mode data model shipped with an allow list and nothing that read it. The
summary would say "2 apps may interrupt" while notification delivery never
consulted the list and no editor could set it. That is the dead row this work
has spent its time removing, introduced by the work itself.

The banner gate consults the mode in force now, and the list can be edited from
the applications that have actually sent a notification -- an exception for
something that never notifies is not a choice worth offering.

Exceptions belong to a mode. allowedApps is empty whenever no mode is active, so
a Do Not Disturb switched on by hand stays absolute and nothing can leak into
it. That scoping is asserted, not just written.

Verifying this took three attempts, and the second was a real defect in the
guard rather than in the code. The contract grep for FocusModes.allows matched
the comment that explains it, so the check passed with the enforcement deleted.
It matches the gate expression now. A guard a comment can satisfy is not a
guard, and this is the third time prose has satisfied one here.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 02:23:30 -04:00
Gabriel Brown 6dc606b872 Give focus modes conditions rather than alarms, and let Gaming hand over 
A mode is on because something is true right now: a game is running, a window is
fullscreen on a given display, a workspace is focused, the clock is inside a
window. That is asked again rather than fired once, and it is the whole reason
schedules could be included here without the usual failure modes. A machine
asleep at 23:30, rebooted at 02:00, or opened at 08:00 into a window that has
already passed all reach the right answer by being asked again; an alarm gets
all three wrong.

The midnight-crossing rule is the part worth being careful about: a window
belongs to the day it STARTS on, so a Friday-only 23:30-07:00 covers Saturday
morning and must not cover Saturday night. That arithmetic was tested as pure
logic before anything was built on it, including every malformed input failing
closed -- silencing someone because a time string was wrong is the worst way
this could fail.

This does not take over the manual timed session. FocusSession already owns
that, with its capsule, shortcut, Quick Settings entry and contracts, so modes
defer entirely while one runs. Two writers of Do Not Disturb would each restore
whatever the other happened to leave behind.

Gaming hands over rather than being duplicated. The hook was silencing
notifications itself, which would have made exactly those two owners -- and
Gaming.active only polls while its settings page is open, so a mode could not
have seen a game reliably in any case. The hook reports the game over IPC now
and the mode decides what that means, the Gaming page points at it, and
gamingSilenceNotifications is retired from the schema, since a setting nothing
reads is the dead row this work keeps removing.

Sleep ships disabled. A desktop that starts silencing someone on first boot has
overstepped, whatever the default hour.

Three contracts moved with it. gaming-contract asserted the hook uses setDnd,
which was right before and wrong now; the shell-side assertions that setDnd and
dndState exist stay, because a toggle would flip an already-silent machine back
on. The new contract is proven to fail by breaking the midnight rule and by
letting modes run alongside a manual session.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 02:06:50 -04:00
Gabriel Brown 32fab59d24 Let a sound device be heard, and the Dock's icons be sized 
Nine outputs named after their chipsets cannot be told apart by reading, so each
one gets a Test button that plays a short sample out of that device. Targeted by
node name rather than by making it the default first, because finding out which
is which should not move where everything else is playing.

That belongs in its own service rather than in AudioDevices. sound-page-contract
forbids Process, pactl and wpctl in the files that own device state, and it is
right to: shelling out there races the PipeWire service that owns those same
objects. Playback is a different thing -- pw-play opens its own stream and
mutates no device, so there is nothing to race -- but the rule's letter covered
it, and weakening a guard to fit a new case is how guards stop meaning anything.
SoundTest exists so AudioDevices stays native bindings only.

Worth recording next to the call: pw-play falls back to the default output for a
target it cannot find, rather than failing. A stale node name would play from
the wrong device and look exactly like a successful test, which is why the name
is taken straight from the live node.

The Dock's icon size was a constant in Theme. It goes through the preference
schema like everything else, so validation, search, the generated docs and the
write sweep all pick it up without being told about it separately -- and two
contracts duly failed until docs/settings.md and the per-page commands were
regenerated.

Dock position is deliberately not here. It is not a setting but a rework: the
dock is anchored bottom, and the reveal strip, tooltip placement, intellihide
and the qs-dock rule in hypr/rules.lua all assume that. Doing it properly means
changing compositor rules on a machine somebody uses daily, which is not
something to start as a side effect of adding a slider.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-20 00:03:21 -04:00
Gabriel Brown f6b970da21 Turn the rows that only reported things into controls 
Autostart entries showed "Enabled" or "Disabled" as plain text. The row did
toggle on click the whole time, so this is an affordance rather than a missing
capability -- but a control that reads as static text is one nobody knows they
have. It is a switch now, with removal alongside it behind a confirmation:
disabling writes Hidden=true and can be undone, deleting the file cannot.

remove-autostart is confined to files the autostart directory owns. It resolves
the path and compares the parent, so a name like "../../.bashrc" cannot escape,
and it refuses symlinks rather than following them -- deleting through one would
remove whatever it points at, which is somewhere else and not ours. Each refusal
was tested against a fixture directory, including a symlink aimed at
/etc/hostname, which survived.

Sharing says who is signed in from another machine: user, origin and since when.
An empty list on this machine proves nothing, so the parser was checked against
sample `who` output -- it picks out remote sessions and leaves out local seats
and the :0 display, which would otherwise report the person at the keyboard as a
remote login.

Media sharing was "Available" and nothing else: rygel installed, rygel.service
disabled, no way to change that from here. It is a switch now, and it says what
it does before you touch it rather than afterwards -- turning it on publishes
media folders to every device on the network with no password in front of them.

Per-application camera and microphone permissions come from the portal's
permission store, which is where an application that asked through the portal
has its answer recorded. The page states the limit plainly instead of implying a
protection that does not exist: a program installed outside the portal opens the
device directly and nothing here stands in its way. Anything that is not an
explicit "yes" is treated as withheld, because guessing generously about a
camera is the wrong way to be wrong.

The first version of the write silently did nothing -- SetPermission takes an
array of strings and was being handed one string -- and the test did not notice,
because it discarded the helper's output and only checked that state was
unchanged afterwards, which was trivially true. The contract now requires the
value to move, and was proven to fail by putting that exact bug back.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 23:10:48 -04:00
Gabriel Brown 7e1c85b094 Group the long pages by what you are trying to do 
Notifications repeated both lock-screen switch labels for every application, so
twenty apps meant sixty rows of the same two sentences and the page could not be
scanned at all. Each app is one row now, carrying what its switches add up to --
"On, lock screen shows the sender only", "On, hidden on the lock screen",
"Notifications off" -- with the switches behind it, one app open at a time. The
identifier only appears while an app is open, which is the only time it
disambiguates anything, and the content switch dims when the app cannot reach
the lock screen at all, because there it means nothing.

Shortcuts were already grouped; the problem was that "Windows" caught focus,
movement, splitting, resizing and window state alike and held 43 of the 93
binds. A section that long is a list, not a grouping. They are separated by
intent now -- Focus, Move & split, Size, Window state -- and the split was
checked against the binds this machine actually has rather than trusted from the
keywords. Order matters in two places worth naming: "Next window splits down" is
about splitting rather than focus, and "Focus session" is quiet mode bound to a
workspace rather than window focus, so both are settled before the general
checks.

Refresh rate gets its own row. That need was created by collapsing the
resolution list: the rates for a resolution were only ever reachable by opening
it, so changing nothing but the rate meant going through the mode you already
had. It appears only when the current resolution offers more than one.

Default-application rows carry a chevron, having previously opened a chooser
while looking completely inert.

The notification contract asserted the literal Notifs.appRule(app.id).enabled,
which moved when the rows collapsed. The rule is still read through a binding on
Notifs.appRule, so a rule changed elsewhere still reaches the row -- the
assertion now requires that, rather than requiring one particular spelling of
it.

The power profile rows were left alone. A three-way choice in three rows looks
wasteful until you notice each row explains what the profile does, and that page
has empty space to spare; a segmented control would trade information for space
that is not scarce.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 22:54:51 -04:00
Gabriel Brown 0c364f38e6 Stop sending people to GNOME for pages this app already has 
Panama absorbed Users, Sharing, Printers and Online Accounts one page at a time.
Each time, the row pointing at GNOME's equivalent stayed exactly where it was --
so an app whose stated purpose is to make GNOME Settings unnecessary shipped four
doors back to it, two of them inside a card headed "these areas remain owned by
Fedora and GNOME's mature system panels".

Nothing failed. Every row worked as written. They were simply no longer true, and
no test could notice, because none of them knew what Panama had come to own in
the meantime. gnome-handoff-contract reads the sidebar for the pages that exist
and the pages for the panels they hand off, and fails on any overlap -- derived
from both sides rather than a hand-kept list, so absorbing the next page cannot
leave a stale door behind. Adding an online account is allow-listed with its
reason: it genuinely requires GOA's own dialog.

health-ui-contract asserted those handoffs were present, which is how they
survived. The assertion is inverted rather than deleted, so reintroducing one
fails loudly.

The Home Assistant "Light entities" box is gone. It was a multi-line list of
comma-separated Zigbee entity IDs, and the light catalog does not come from it --
the helper discovers that live. It is a one-time migration seed for the Control
Center selection, so saving now passes the stored value back untouched: setting a
URL or a token cannot disturb it. Deleting the control naively would have written
an empty list over it.

Sharing showed two "Port" rows for RDP, same label and value, one read-only and
one editable, separated by a switch. The read-only leftover is gone. The SSH port
stays read-only because sshd's port is not ours to write.

About reported "488G free of 1.9T" where Storage said "523 GB free of 2.0 TB" --
the same drive, binary against decimal. About uses decimal now, matching how
drives are sold. Memory and swap stay in GiB, which is how RAM is sold.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 22:36:58 -04:00
Gabriel Brown 1aa1324083 Lead Appearance with light and dark, and stop pages listing whole datasets 
Appearance was six cards deep and Light/Dark was the third of them, below the
wallpaper grid and the entire lock screen -- so the control reached most often
was the last one you got to. It is five tabs now, Theme first. The mock showed
four; the page turned out to have eleven cards, so Titlebars and Windows became
Windows, and Clock and vitals became Shell, rather than pretending four would
hold them.

Region, Date & Time and Displays each rendered a complete dataset as rows: every
installed locale, the whole tz database, every mode the monitor advertises. The
chooser was never the problem -- SearchPicker already existed and worked. It was
simply rendered always-expanded, so the one line saying what is currently set sat
under hundreds that were not. PickerRow collapses each behind its current value
and closes again once something is picked.

The avatar never appeared to change because accountsservice writes every picture
to the same path, leaving the URL byte-identical while Qt served its cached
image. cache:false was already set and could not have helped: an unchanged source
is never re-read at all. avatarUrl now carries a revision fragment, bumped only
when a write actually succeeds. Pictures are cropped before they are set, in the
picture's own pixel coordinates so the result does not depend on the size it
happened to be displayed at, and written out at 512x512 through GdkPixbuf --
already a dependency here, so nothing new is required.

Snapshots listed nothing. The timeline and its Delete buttons existed the whole
time, behind a row labelled "Browse...", a word that promises a file browser. The
three most recent points are shown inline now, with the rest one press away.

qmldir-registration-contract exists because an unregistered component is not a
quiet problem: Quickshell fails the entire configuration on it, so the settings
window dies and the bar and dock go with it. That happened twice while writing
this, both times on a machine somebody was using. It is pure file inspection, so
it runs before a change ever reaches the running shell.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 22:36:41 -04:00
Gabriel Brown ac5e6e2130 Add a Containers page, grouped by project and led by what is exposed 
Every container on this machine is created by rootless podman-compose and
labelled with the project it belongs to, so the grouping is read from the
labels rather than invented. State then decides prominence within that
grouping -- running containers get rows, stopped ones collapse to a line --
which is why neither axis had to be chosen over the other.

Acting on a stack uses plain podman over the labelled set, never
`podman-compose down`, which would remove containers this shell did not
create. The compose file is the source of truth for what exists and belongs
to the repository. Nothing here needs privilege.

The findings on top are the crossing the Firewall page reports, seen from the
side that can close it: the firewall knows only that something is listening,
while this page knows which container, which compose file, and which token is
missing from it. So `bind-local` prepends a loopback address and leaves the
line byte-for-byte -- variables, quoting and style intact -- then re-parses and
rolls back unless exactly those ports moved. It refuses anything ambiguous
rather than guessing. Rewriting the mapping to the port podman reports today
would have deleted the ${POSTGRES_PORT} indirection that makes it
configurable at all.

Unused volumes are read from podman's own dangling filter. The first version
used MountCount, which is a runtime lock counter and not a usage signal: it
reads zero for a volume a running container has mounted this second, so
"remove unused volumes" offered to delete the live Command Center database.
The cross-check against `podman system df` is what exposed it. The contract
reintroduces that bug deliberately and fails if the guard does not catch it,
because a guard nobody has seen fail proves nothing.

Every mutation in the contract runs against a stubbed podman. Nothing in the
suite starts, stops or removes a real container, image or volume.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 20:49:04 -04:00
Gabriel Brown 536958430f Fix the polkit unit's ignored rate limit 
systemd logged "Unknown key 'StartLimitIntervalSec'" on every start:
rate limiting belongs in [Unit], not [Service], so both keys were
ignored and the restart limit they were meant to impose did not exist.
An agent that failed repeatedly would have flapped rather than stopping.

Found while investigating reported prompt failures, which turned out not
to be a defect: the trace showed both authentications succeeding on the
first attempt. The failures came from testing -- prompts raised by
background pkexec runs and then cancelled seconds later, while someone
was trying to type into them.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 19:54:16 -04:00
Gabriel Brown fd99569666 Add a Firewall page, led by what is actually reachable 
Listing zones and services is what firewall-cmd already does. The
question it does not answer needs both halves at once: a port is
reachable only when something is LISTENING on a network address AND the
firewall permits it.

On this machine that crossing is the whole story. The rules look
unremarkable -- one zone, three services, a port range -- and what they
mean is that PostgreSQL and Redis, published by rootless containers on
every interface, are reachable by anyone on the network. Neither half
says that alone, which is exactly how a tidy rules list coexists with an
open database. Nothing was misconfigured: Fedora's default zone met
podman's default publish behaviour.

Ephemeral client sockets are excluded. A browser's outbound UDP port is
indistinguishable from a service in ss, and listing twenty of them
buried the two rows that mattered.

Closing the port range names what it would cut off, by service, before
doing it, and removing ssh says so when someone is connected over it.
Rich rules are shown and never edited: a syntax is not a setting, but
hiding it would misrepresent the configuration.

The contract needed a recorded firewall, and the reason is worth
keeping. The rule this page exists for cannot be tested against this
machine -- its zone permits everything above 1024, so "listening" and
"listening and permitted" give identical answers, and a blocked listener
needs a port below 1024, which needs root. With the crossing deleted,
the contract passed. It now runs against a fixture where two listeners
are blocked, and catches it.

Also here: polkit response files are written 0600 rather than at the
default mask, the agent sweeps requests left by an instance that did not
exit cleanly, and the write sweep waits for its harness to be ready
instead of reporting the startup race as settings that failed.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 19:46:16 -04:00
Gabriel Brown a412e3d894 Fix the compositor write contract properly, not by waiting longer 
Widening its waits earlier treated the symptom. It still failed about
one run in three, on an idle machine, taking eighteen seconds to do so
-- which was the clue: nothing was in flight to wait for.

SystemSettings verifies each write before storing it and serializes
overlapping ones, so the restore arriving while the previous batch was
still settling was being dropped outright. Waiting longer for a write
that was never queued cannot help. It is issued up to three times now,
and the run where a retry fires visibly takes eight seconds instead of
two.

Retrying cannot hide a broken write path: with the write stubbed out the
contract still reports exactly which policy failed to reach the
compositor.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 19:05:29 -04:00
Gabriel Brown 4cbe3b882a Add a Gaming page, and let the desktop react to games 
Live first, because unlike every other page here this one has a live
dimension: card temperature, power draw, whether Game Mode actually
engaged. It polls only while it is open, since a settings page nobody is
looking at has no business waking the CPU.

The part that makes it Panama's page rather than a gamemode config
editor is the hook. gamemode runs a script when a game asks for it and
another when the game exits, so the power profile switches to
performance and notifications go quiet for exactly the duration of a
game -- and afterwards both go back to what they WERE, not to a default.
A Do Not Disturb someone set by hand survives a game; a power profile
someone chose is restored rather than replaced. Verified against real
gamemode activation, not merely by calling the hook.

Two things the page reports rather than hides. Game Mode's headline
trick is switching the CPU governor to performance, and this machine
already runs performance, so it says so instead of implying it helps.
And Proton builds are listed but never chosen: Steam picks the runtime
per game, and a control here would claim an authority this page does not
have.

The hook first called a notifications function that did not exist, and
the one that did was a TOGGLE -- the wrong primitive entirely, since
toggling at game start would unsilence notifications that were already
silent. The shell gained an explicit setter and reader.

search-routing-contract kept its own hand-written list of every page,
which made adding one fail as "not a known page" -- a sixth place to
register a page and a sixth chance to forget. It now derives the mapping
from the shell, which already knows it.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 18:55:10 -04:00
Gabriel Brown edc504af2e Drop the self-hosted integration batch, and say why 
The machine runs essentially every popular self-hosted service, and on
looking at them the batch was revised once and then dropped. Almost all
of it is infrastructure for other services rather than anything a
desktop consumes -- whisper there feeds Bazarr subtitles, not dictation
here -- the desktop has the better GPU anyway, and the one genuinely
desktop-shaped idea is already solved by an installed application.

Recorded rather than deleted so it is not proposed again, with the
lesson that matters: a service existing is not a reason to integrate it.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 18:38:19 -04:00
Gabriel Brown a15f019c17 Offer automatic package downloads, now that the machinery is installed 
The page had a row for the case where dnf-automatic is absent and
nothing for the case where it is present, so installing it made the
setting disappear rather than appear.

The switch enables downloading only, which is the shipped default and
the right one to keep: a machine that installs packages unattended can
reboot into a kernel nobody chose. Downloading ahead of time is what
makes the install quick when someone does choose it, and the row says
exactly that rather than implying updates apply themselves.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 18:24:30 -04:00
Gabriel Brown 116510caa8 Draw the authentication prompt ourselves 
hyprpolkitagent's dialog is compiled into its binary -- no config, no
stylesheet, nothing to theme -- and it was the one window on this
desktop that looked like it belonged to something else.

The split between the two halves is the security design, not an
implementation detail. A small agent process owns the D-Bus side: it
registers with polkitd, receives the request, and hands the shell the
action, the message, who may answer, and a one-time cookie. It never
sees a password. The shell draws the prompt and, on submit, spawns the
setuid polkit-agent-helper-1 itself and writes the password to that
helper's stdin; the helper runs the PAM conversation and reports to
polkitd directly. The password exists in the shell and in the helper's
stdin and nowhere else -- never on a command line, never over D-Bus,
never through IPC arguments.

The prompt takes exclusive keyboard focus, because a password field that
lets keystrokes reach the window behind it is a keylogger with extra
steps. The request travels as a file created 0600 with O_EXCL inside a
0700 runtime directory: a cookie is not a password, but it is a
capability, and capabilities do not belong in a process listing either.

Three things cost real time. polkitd calls back on the same connection
that registered, so exporting the object on the session bus while
registering from the system bus failed every request as "Not authorized"
with no error anywhere. XDG_SESSION_ID is absent in a systemd user unit,
which runs under [email protected] and belongs to no login session, so the
session comes from logind's Display property instead. And PyGObject does
not accept the @ placeholder in variant format strings.

hyprpolkitagent stays installed as the fallback, only one agent is
started, and the comment beside the autostart says how to get the stock
prompt back. Verified end to end, including a real password accepted and
three cancellations refused.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 18:08:52 -04:00
Gabriel Brown b10f8e2593 Stop the compositor write contract failing under load 
It passed alone in two seconds and failed in a full suite run at six,
which is the worst way for a test to be wrong: the code was fine and the
report said otherwise.

Each of its waits polls until the compositor reflects a write, and four
seconds was enough on an idle machine and not enough on a busy one. They
are fifteen now. A longer bound cannot mask a dead write, because a
write that never lands never matches -- verified by stubbing the write
path out and watching it still report exactly which policy failed.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 17:33:12 -04:00
Gabriel Brown 8f0fe23377 Add Software Update, across packages, applications and firmware 
Three sources that fail independently, so they are counted and applied
separately: a flatpak mirror being down says nothing about whether a
kernel security fix is waiting. Blending them into one number would hide
exactly the case that matters.

Checking costs about nine seconds, which is too long to spend every time
a page opens, so the page opens on the last result and says when it was
taken. A first visit with nothing cached goes and finds out rather than
showing a confident "up to date" it has no basis for.

Installing packages takes a snapshot first, named after what is about to
happen, so Snapshots shows "before 32 package updates" rather than a
timestamp. Best effort: a machine without snapper still updates, because
an update that refuses to run when a nicety fails would be worse than
one without a restore point.

Automatic updates cover applications only, through a Panama-owned user
timer running daily with a randomized delay. Packages still ask, and
dnf-automatic is reported as absent rather than offered, because
installing software is not a settings action.

Health gained a check, and that is where the bug was: it first returned
status "degraded", which is not in the doctor's vocabulary of ok,
warning, error and unconfigured. It was counted as nothing at all while
the summary still said healthy -- the same silent no-op this codebase
keeps relearning. A contract now asserts every status a check can return
is one the doctor counts, and the doctor's own contract knows about the
new check rather than failing on its arrival.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 17:25:11 -04:00
Gabriel Brown 89cf0f8c29 Plan the settings work beyond GNOME parity 
Parity is done except for Color, which the platform blocks. This is the
other direction: what a settings application should own on a machine
whose owner runs the servers.

Every item was checked against this machine before being written down,
including the one that was dropped -- a VPN page, because the WireGuard
tunnel lives on the router and neither wg nor tailscale is installed
here, so it would have had nothing to drive.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 17:06:39 -04:00
Gabriel Brown e290a262f3 Make notifications legible, and follow windows that ask for focus 
The notification background was a 6% foreground tint over a transparent
window, which meant it had nothing behind it at all: the card sat
directly on whatever was on screen and the text competed with it.
Notifications are the one surface someone reads without having chosen to
look at it, so it now uses a real popover surface -- a little lighter
than one you opened deliberately, because a toast arrives unbidden and
full popover weight reads as a dialog demanding an answer.

Windows that ask for attention are now switched to rather than merely
highlighted, so a link opening on another workspace takes you there.
That setting already existed and was simply off; it is a preference
rather than a hardcoded behaviour, so it can be turned back off on the
Desktop & Dock page.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 17:05:37 -04:00
Gabriel Brown 6997dd535f Add high contrast, and make remote desktop configurable 
Two of the three panels still handed to GNOME, having actually checked
each rather than repeating that they were not worth owning.

Universal Access turned out to be mostly ours already: the magnifier,
pointer size, text scale, motion and dimming were all present. High
contrast was the real gap. It reaches GTK4 applications through the
desktop portal, which republishes GNOME's accessibility setting as
org.freedesktop.appearance contrast -- so no high-contrast theme is
involved, and none is installed here. Verified end to end: committing
the preference drove gsettings and the portal reported contrast 1.

Sticky, slow and bounce keys stay absent. There is no Wayland or
Hyprland implementation, and the compositor would store the XKB option
while nothing ever acted on it.

Remote desktop gained port, view-only, and clearing stored credentials.
SETTING credentials opens a terminal running grdctl, which prompts for
the password itself. That is not a hand-off for lack of effort: grdctl
takes the password on a terminal and core-dumps without one, and the
only alternative -- passing it as an argument -- would publish it
through /proc to every process on this machine. Typed into grdctl
directly it never passes through Panama, and a contract now fails if it
ever appears on a command line.

Color stays with GNOME, and not for lack of effort either. colord runs
here with seven profiles and zero devices registered, because the
daemons that register displays do not run under this session, and
Hyprland exposes no ICC, gamma, or color-management option at all. A
Color page could import a profile, attach it to nothing, and change
nothing -- the same failure refused for rollback and printer drivers.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 16:42:20 -04:00
Gabriel Brown 1f40f8e136 Add a snapshot manager, and start covering home 
The machine already had snapper running hourly on btrfs, so the tool was
never missing. What was missing is that snapper's only configuration
covered / -- and /home is a separate subvolume with no configuration at
all. Six hundred and forty-three snapshots existed and not one of them
contained a document. Anyone reaching for file history would have found
their system and none of their files.

/home now has a configuration on the same hourly timeline, with
deliberately conservative retention: Steam's 1.2 TB lives on that
subvolume and churns on every game update, so keeping five hourly and
seven daily bounds what those updates can pin.

Per volume, because on this machine "one is covered and the important
one is not" was the news, and a timeline opening on system snapshots
would have buried it. Inside a volume the timeline is the familiar view:
points in time, newest first, each openable as a folder tree to take a
file out of.

Restoring sets the current version aside as .before-restore-N rather
than overwriting it. A restore that destroys the thing you were about to
compare against is how someone loses the work they were trying to save.

Rollback is deliberately absent. snapper's rollback changes the btrfs
default subvolume, and this system's fstab pins subvol= explicitly,
which overrides it -- so a rollback would report success and change
nothing after a reboot. A recovery feature that silently does nothing is
worse than not having one, and making it work means editing fstab and
the bootloader, whose failure cannot be repaired from inside the
desktop.

Per-snapshot size is reported as not measured, because measuring it
needs btrfs quotas that cost performance on every write. Free space is
shown instead, which is the number that decides anything.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 16:11:50 -04:00
Gabriel Brown e9d567aa72 Own printers, driverless only 
The fourth panel this desktop handed to GNOME Settings, and the last one
worth owning.

Driverless only, deliberately. Adding a printer that describes its own
capabilities over IPP is supported; choosing a PPD or fetching a vendor
driver is not, and the page says so rather than pretending. That
restraint is the whole design: a wrong driver produces a printer that
accepts jobs, reports success, and prints nothing, which is the worst
failure this page could ship because it looks like it worked. A printer
old enough to need a PPD stays a job for the system printer tool.

Printers and the queue are separate cards because they answer separate
questions. Which printers exist is one; where a document went is the
other, and it is the one that actually brings someone here -- so the
queue is a single list across every printer.

Device URIs are validated by scheme before reaching CUPS, whose backends
run as root. file: and pipe: do not lead to a printer and are refused
here rather than further down.

This machine has no printer, so the page was built against a temporary
CUPS queue that was created, exercised through the service, and removed;
the service was confirmed to observe the removal rather than merely
perform it. Discovery and the driverless add path are verified by their
refusals rather than against hardware.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 15:07:17 -04:00
Gabriel Brown 914d58f52b Record which GNOME panels are owned and which are not 
Which panels we own is a question that otherwise gets answered one panel
at a time, and forgotten between them.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 13:17:53 -04:00
Gabriel Brown a23b42841a Own user accounts and sharing 
Two of the panels this desktop still handed to GNOME Settings.

Users manages the account through accountsservice -- the same daemon
GNOME's panel drives, so a name or picture set here is what the login
screen and lock screen read. Name, picture, account type, password,
automatic login, and adding or removing other accounts. Every change is
authorized by polkit through the agent this session already runs; a
dismissed prompt is a normal outcome and says so.

A new password is read from the helper's stdin, hashed by openssl
reading its own stdin, and handed over D-Bus from inside that process.
It is never an argument: argv is world-readable through /proc, so a
password passed that way is published to every process on the machine.
Removing an account takes two presses and says it destroys their files;
the last administrator cannot be removed or demoted, because a machine
nobody can administer is not a state to offer.

Sharing reports what is actually true, including "the software for this
is not installed" -- the honest answer for Samba here, and the case the
panel it replaces shows as a switch that does nothing. Password sign-in
is reported from sshd's configuration rather than assumed: claiming
"keys only" when the file is silent would state a security property that
cannot be backed up.

The Control Center now draws the account's real picture and name. A
generic glyph sat there while a real avatar was already set, which made
the desktop look like it did not know whose it was.

Also here: the KDE Connect contract no longer requires a phone to be
awake. kdeconnectd drops its device objects for a phone it has not seen
recently while the pairing survives in its config, so demanding one
failed whenever the phone was off.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 13:05:13 -04:00
Gabriel Brown e0c0e53ae0 Say what the sweep helper is, when run on its own 
A suite runner walking the tests directory executes it with no arguments
and gets an IndexError, which reads as a failing test rather than a
helper being used wrongly.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 12:22:38 -04:00
Gabriel Brown 180308135a Verify every setting actually does something 
The audit that followed "some things in the settings app don't work".

Sixty-five settings reach the compositor and five of them were checked
against it. The rest were covered only by tests that read source text,
which is exactly where a dead setting hides: the write no-ops, nothing
fails, nothing logs, and the row simply does nothing.

The sweep drives each setting through SystemSettings.commitPreference --
the entry point a settings row uses -- flips it to a value it does not
hold, reads it back from the live compositor, and puts it straight back
before touching the next one. Settings Panama stores itself get the same
treatment against the store, since a value that fails to persist is the
same dead row from the outside.

Result: 61 of 63 compositor settings verified against the running
compositor, and 51 stored settings round-tripped. No failures. The
breakage was confined to the Applications page, which is fixed.

Proven able to fail before being trusted: with commitPreference stubbed
to return true without applying, 61 settings are reported; with the
store stubbed to return nothing, 51 are. A one-second settle window
keeps a slow read from being reported as a dead write, which it briefly
was.

Also here: control-center-contract asserted the literal margin
expression that made the panel hang 38 pixels below the bar, so the
contract and the code agreed and the bug was invisible to both. And
settings-page-registry-contract is deleted -- settings-nav-contract
already checked those files and more. It would have caught the Storage
page omission if I had run the suite instead of a hand-picked subset.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 12:17:27 -04:00
Gabriel Brown b743f44c5b Make changing a default application actually take effect 
Three bugs, all silent, all in the same feature.

The write always worked. What failed was the refresh after it. That
refresh is called from the mutation's own onExited handler and was
guarded on `busy`, a binding over both processes -- and a binding hands
back its cached value until the change notification feeding it has been
delivered, which inside that handler has not happened yet. So `busy`
read true, refresh returned immediately, and the page kept showing the
old application with no error anywhere. Guards now read the Process
objects directly, where the value is current, and a refresh is no longer
blocked by the mutation that asked for it.

The service also kept its own list of which roles it would accept. It
stayed at seven when the helper and the page grew documents, text and
archives, so choosing a PDF viewer set an error and changed nothing.
It is derived from the snapshot now.

And category matching never worked. DesktopEntries returns a QML list,
for which Array.isArray is false, so the code stringified it into
"Network,WebBrowser" and split on ";" alone -- one token matching no
category. Browsers still appeared because their generic name contains
"web browser" and the terms fallback carried the role by itself.
Archives matched nothing at all, so that row could only ever offer the
application it already had.

The harness that should have caught the first bug passed while it was
live: it set each role to the value it already had and asserted no error
appeared, and the bug produces no error. It now changes a role to a
genuinely different application, requires the service to observe the new
value, and changes it back -- with the contract restoring the original
from the outside however the run ends.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 11:59:53 -04:00
Gabriel Brown 2528edfddc Stop every popover double-counting the bar height 
The control center fix applies to five more surfaces: the date menu,
the clipboard panel, the activity panel, notification toasts, and the
signal glass all opened 48 pixels under the bar while their own
expression asked for 12.

wlr-layer-shell has three behaviors and only the middle one is subtle.
A positive exclusiveZone reserves space; a negative one ignores what
others reserved; zero reserves nothing but RESPECTS what others
reserved. Every popover here uses zero, so the compositor had already
placed them below the bar before their own margin applied, and adding
Theme.barHeight counted the bar twice.

It is not a crash or a warning -- the surface simply opens lower than
written -- so a contract now holds the rule mechanically: a surface
with exclusiveZone 0 may not name Theme.barHeight in a margin. It also
checks the premise it rests on, and fails if the bar ever stops
reserving its own height rather than quietly checking the wrong thing.

Measured after: date menu and clipboard at 12px, control center at 2px,
each matching what its code asks for.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 11:31:53 -04:00
Gabriel Brown dbd1472e6b Read busctl as JSON so device names keep their characters 
A phone named "Gib's iPhone" with a typographic apostrophe was shown as
"Gib\342\200\231s iPhone".

busctl's default text output escapes every non-ASCII byte in octal, and
escapes it into the output rather than into a quoted string a
shell-style parser can undo, so shlex handed back the escape sequences
as literal characters and they went straight to the page. Apostrophes
were only the visible case: accents, emoji, quotes and backslashes were
all affected, and a name containing a quote could have split a field.

Property and method reads now use --json=short, which returns real
UTF-8, and the parsers read a document rather than splitting words.
That removes the class rather than unescaping octal by hand.

The fixtures were the reason this stayed invisible: every test fed the
text form and passed against output the helper is no longer asking for.
They now carry what busctl actually emits in the mode used, plus a case
for a non-ASCII name and one asserting the old text form is refused
rather than parsed wrongly.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 11:28:36 -04:00
Gabriel Brown eeb49c5aff Hang the control center under the bar instead of below it 
The panel opened 38 pixels beneath the bar while its own comment said
two. margins.top added Theme.barHeight to the gap, but an exclusiveZone
of 0 means "reserve nothing, respect what others reserved" -- so the
surface already began below the bar's 36px zone and the bar height was
counted twice.

The margin is now the gap alone, which also means the panel follows the
bar: if the bar ever stops reserving space, this closes up against the
top edge rather than hanging under nothing.

Measured before and after against hyprctl layers: bar bottom at y=36,
panel top from y=74 to y=38.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 11:23:05 -04:00
Gabriel Brown 8e93f08977 Show what the keyring holds, without showing what it holds 
Managing a stored credential meant installing Seahorse. The keyring
rows on Privacy could say whether it was locked and nothing about what
was in it.

Four rules, each pinned by a contract, because each is a way this could
leak the thing it exists to protect:

Listing never reads values. Enumerating reports labels and attributes;
it does not ask the keyring to hand over what it is protecting.

A secret never reaches a command line. /proc makes argv readable by
every process on this machine, so a password passed as an argument is
published to all of them. The helper reads the value in process and
writes it to wl-copy on stdin.

A secret never reaches an error message, a log, or a QML property. An
exception raised while holding a password does not get to choose what
text is printed, so the clipboard tool's stderr is discarded rather
than echoed.

Forgetting one is irreversible, so the first press asks and the second
does it, and the confirming button is the only one wearing danger.

The list is collapsed until asked for: opening Privacy should not
enumerate someone's passwords as a side effect. A copied value clears
itself about a minute later, but only if the clipboard still holds it --
the guard compares a SHA-256, so the waiting process never has the
password.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 11:14:32 -04:00
Gabriel Brown 99433c0e8e Add a Storage page 
Nothing showed what was using the drive, and removable media was handled
by a tray helper with no surface in Settings at all.

One scroll rather than tabs: space above, the device below. Every other
settings page is a scrolling card stack, and a tab would not be
deep-linkable from the launcher command or from search.

Three things the page has to get right, each now pinned by a contract,
because each is a way it could quietly lie. / and /home are one btrfs
filesystem sharing one pool of free space, and a page that copies df
shows double the free space that exists. zram is a block device and is
not storage; counting it as a drive overstates this machine by 8 GB.
Unmount and eject refuse anything not on a removable drive, because the
UI is what asks and a UI can be wrong.

The cheap read -- layout, usage, health -- runs when the page opens, at
around 90ms. Measuring what is filling the drive means walking every
file, so it happens on request and says so rather than showing an empty
list that reads as "nothing here".

Partitioning and formatting are deliberately absent. A settings pane is
the wrong place to put erasing a disk two clicks deep; the page opens
GNOME Disks for that.

Adding the page found a fourth hard-coded page list in ShellState. A
page missing from it does not error -- openSettings() falls back to
"home", so the launcher opens the wrong page and logs nothing. A
registry contract now holds the three lists together.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 10:52:10 -04:00
Gabriel Brown a68e4f6dcd Make every settings page reachable from the launcher 
Settings had a search index and the launcher had script commands, and
neither knew about the other: finding a setting meant opening Settings
first and searching there. One command per page is now generated from
the same sources the in-app search reads -- the sidebar page list, the
group routing, and the schema labels -- so a setting searchable inside
Settings is searchable from the launcher without a second list to
maintain.

Generating it surfaced a gap in the in-app search as well. Six pages had
no vocabulary at all, because their contents come from the system rather
than our schema, so searching "volume" found nothing in Settings either.
They now carry entries, which improves both surfaces.

The product prefix is dropped from every hand-written command title. The
generated ones are qualified "Settings: <page>" instead: a bare page
label collides with the feature of the same name, and two commands
sharing a title are indistinguishable in a launcher.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 09:47:07 -04:00
Gabriel Brown 2b3b762793 Install what the default-application roles are curated to 
Seeding is deliberately conservative: a role whose preferred applications
are all missing is left alone rather than forced. That is right, and it
is also silent -- so a curated handler nobody installs presents as the
machine quietly going back to deciding defaults by installation order,
which is the problem seeding exists to fix. None of Loupe, Papers,
Decibels, Nautilus, mpv or sushi was declared anywhere.

Preview works, on org.gnome.NautilusPreviewer2 rather than the interface
its bus name suggests, but it opened tiled -- shoving the file manager
aside for something meant to be an overlay -- so it gets a float and
center rule sized to leave the file underneath visible.

xdg-utils and desktop-file-utils were undeclared too; seeding from
link-dotfiles started calling them, and the dependency contract said so.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 09:35:12 -04:00
Gabriel Brown 91306ce810 Give libadwaita applications the desktop's accent 
Files, Papers, Loupe and every other libadwaita application read their
accent from the Settings portal, so they rendered in GNOME blue no
matter which accent this desktop was set to -- correct on our own
surfaces, wrong on half the screen.

xdg-desktop-portal-gtk cannot serve org.freedesktop.appearance
accent-color at all; the string does not appear in the 1.15.3 binary.
The gnome backend serves it, so Settings now routes to gnome with gtk
still listed behind it -- the frontend merges Settings backends in
order, so color-scheme keeps resolving if the gnome backend is ever
unavailable.

GNOME's accent-color is a fixed enum of nine names rather than a color,
so each of our eight accents carries its nearest member. Nearest by hue
rather than by name: rose maps to red, because it is the red role in
this palette.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 09:31:50 -04:00
Gabriel Brown 1b94af1163 Plan the desktop integration work 
Six areas an OS is expected to own that this desktop still delegates:
preview, GTK accent cohesion, storage, launcher search, secrets, and
backups. Ordered so each is useful the day it lands.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 09:19:40 -04:00
Gabriel Brown b4ce148caf Give each default-application role a whole family of types 
Every role carried a single representative type, so setting "Images"
changed image/png and left image/jpeg wherever it landed. That is how
this desktop ended up opening PDFs in GIMP, PNGs in a pixel-art editor
and MP3s in a video transcoder: nobody chose any of it, applications
registered themselves for everything they could read, and the roles
governed one type each.

Roles now own families and write every type when set, the settings page
exposes the documents, text and archives roles it never offered, and a
new seed command curates a fresh machine during setup while always
keeping a choice the user has already made.

The shipped editor entry launches kitty explicitly. The stock
nvim.desktop sets Terminal=true, which defers to whatever the system
considers default rather than the terminal this desktop themes.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 09:17:33 -04:00
Gabriel Brown 2fcaada7e8 Snapshot automatically before restoring defaults 
Restoring defaults clears every preference and the Home accessory store,
and nothing in the app can undo it. Snapshots existed but were entirely
manual, so the one irreversible action Panama offers was also the one
with no safety net.

It now snapshots first. Not fatal if that fails: someone who asked to
reset gets their reset, and a snapshot that could not be written is
reported rather than allowed to block what they asked for.

The wiring is inverted deliberately. SettingsBackup already references
SystemSettings, so referencing it back would make two singletons depend
on each other, which is an initialisation-order problem waiting to
happen. Instead SystemSettings exposes a seam defaulting to a no-op and
SettingsBackup installs itself into it at startup -- the same shape as
the seams the reset path already uses for test isolation.

The contract asserts the snapshot is FIRST in the call sequence, not
merely present. A snapshot taken after the stores were cleared would
faithfully record the wiped state as the user's own, which is worse than
no snapshot: it looks like a safety net and is a copy of the damage.
Verified against both mutations -- removing the snapshot, and moving it
after the wipe.

One trap, hit for the third time today: QML allows only one
Component.onCompleted per object, and SettingsBackup already had one.
Adding a second does not fail locally -- it poisons the entire services
module, so every singleton reports "Type X unavailable" and the real
error is the last line of a forty-line cascade.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 08:37:43 -04:00
Gabriel Brown 588dec4adc Generate the settings reference from the schema 
Every other form of documentation here has drifted at least once today:
search routing that pointed at a page not containing the setting, a
contract that pinned the bug the same commit fixed, and a comment in
shell.qml that failed to stop me making the exact mistake it described.
Prose describing 127 settings would drift the day after it was written.

So docs/settings.md is generated, and a contract fails the moment the
committed copy stops matching the schema. The document cannot be wrong
for longer than it takes to run the suite.

It reads the schema by parsing rather than importing, since there is no
QML interpreter here and requiring a compositor to build documentation
would be worse. That parser is the risk, so it FAILS LOUDLY: if it stops
recognising the file it exits non-zero with the reason and writes
nothing, because a partial reference is worse than a stale one -- stale
is caught by --check, partial reads as complete. Verified: with the
entry pattern broken it reports "only 0 entries parsed" and leaves the
committed file untouched.

The contract also proves --check actually compares content, by appending
a line and confirming it fails, rather than trusting a command that
returns success to mean anything.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-19 08:37:43 -04:00
Gabriel Brown d96863b687 Convert British spellings to American across the repo 
colour -> color, behaviour -> behavior, centre -> center, favourite ->
favorite, and about twenty other pairs, applied consistently across
comments, docs, error/UI copy, and a handful of QML identifiers that
used the British spelling as their actual name: SystemSettings'
serialiseValue/serialiseTable/normaliseGradient, Displays'
normaliseModes, Wallpaper's normalisePolicy, SettingsBackup's
serialiseHomeState, DateTime's ntpSynchronised property, Clipboard's
_normalise helper, and ShortcutCapture's cancelled signal (with its
onCancelled handler in ShortcutsPage.qml). Every call site and the two
tests that assert on the literal source text (settings-ownership and
settings-backup-live contracts) were updated in lockstep.

Left untouched: config/dot/espanso/match/packages/misspell-en/ is a
vendored third-party autocorrect dictionary -- its entries are typo
corrections, not our prose, and rewriting them would fight the
package's own purpose (and any future re-sync from upstream).

The already-American `favorites` property (Home page pinned
accessories) was never actually misspelled -- only nearby comments and
error strings said "favourites" -- so no data migration was needed
there.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-19 08:07:55 -04:00
Gabriel Brown 8156fc47ca Fix a false Nextcloud health warning 
Two compounding bugs: the check looked for an autostart entry named
"nextcloud.desktop", but current nextcloud-client packages ship it
Title-cased as "Nextcloud.desktop" -- a case-sensitive filesystem
never matched, so it always reported "autostart is not configured"
even with autostart genuinely on. Made the lookup case-insensitive so
a future package rename doesn't reintroduce this.

Second, even past that, it ran systemctl against "nextcloud.service" --
a unit that doesn't exist in either scope, because the client is a
plain autostarted process with no systemd unit behind it at all (same
reasoning as the RustDesk autostart.lua comment, different shape: no
service to query rather than the wrong scope). Added a process_check
helper alongside the existing service_check and switched Nextcloud to
it; confirmed live it now reports "Process is running."

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-19 07:53:04 -04:00
Gabriel Brown 9bc771bcca Fix a false RustDesk health warning 
The check queried `systemctl --user is-active rustdesk.service`, but
RustDesk ships an enabled *system* service (root-owned, spawns the
session --server/--tray on its own -- see autostart.lua's comment on
why Panama doesn't start it a second time). No user-scope unit by
that name exists, so the check always reported inactive regardless of
whether RustDesk was actually running. Dropped --user; confirmed live
that a plain `systemctl is-active` correctly reads the system unit
without needing root, and the doctor now reports "Service is active."

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-19 07:41:27 -04:00
Gabriel Brown fe74a82a46 Route the Background portal to xdg-desktop-portal-gnome 
Nothing served org.freedesktop.impl.portal.Background under Hyprland:
gnome.portal implements it but is UseIn=gnome, same situation the
Secret mapping below already solves for gnome-keyring. Every Flatpak
app's own "run/start on login" toggle goes through this portal, so it
silently failed for all of them -- Bitwarden logged the failure on
every launch.

Verified live rather than assumed: xdg-desktop-portal-gnome starts as
a standalone backend process with no dependency on GNOME Shell or
gnome-session, and after adding the mapping and restarting the portal,
Bitwarden's own autostart request succeeded end to end
(response=Background { background: true, autostart: true }) where it
previously errored with "portal frontend ... was not found".

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 22:32:53 -04:00
Gabriel Brown ac231eeb54 Stop double-launching Nextcloud and Bitwarden at session start 
Both already have a ~/.config/autostart/*.desktop entry, and systemd's
own xdg-autostart generator turns that into a graphical-session.target
unit that fires on its own -- confirmed live via `systemctl --user
list-units 'app-*@autostart.service'`. autostart.lua was also launching
both explicitly, on the (apparently outdated) assumption that nothing
else would. For Bitwarden this was actively harmful: each `flatpak run`
gets its own sandbox instance, so the duplicate launch left two
processes fighting over the app's single-instance lock, with neither
reliably owning a usable window -- this is what "can't open Bitwarden"
traced back to, alongside a live document-portal fuse mount that had
silently died (fixed by restarting xdg-document-portal.service; not a
config issue, so nothing to commit there).

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:35:31 -04:00
Gabriel Brown 8cf03d4529 Remove dead shell components and fix stale docs 
NotificationCenter.qml, CalendarPopup.qml, and RecordingIndicator.qml
were never instantiated anywhere -- shell.qml builds NotificationList,
DateMenu, and CaptureOverlay in their place. Verified with a repo-wide
grep before deleting; updated the two stale comments in Notifs.qml
that still pointed at NotificationCenter.

DESKTOP-PARITY.md still described Wi-Fi QR sharing as deliberately
omitted, though it was since built. The System Health colour-profile
handoff pointed at GNOME's colour panel as if it worked, but the
daemon that actually loads an ICC profile doesn't run in this session,
so it silently does nothing -- reworded the card to say so. Displays
carried two verify-timer attempt counters that were incremented but
never read anywhere.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:23:32 -04:00
Gabriel Brown 2a716dac9e Fix correctness bugs across the helper scripts 
panama-osd read the wrong brightnessctl field, showing the hardware
max instead of a percentage on any backlight device. panama-doctor
called three sibling scripts by bare name with nothing on PATH,
making three health checks permanently and falsely report broken; its
repair actions also reused the short probe timeout, so a slow-but-
successful restart was reported as failed. panama-wifi-qr left the
cleartext passphrase temp file behind on its failure path (the RETURN
trap doesn't fire on exit), and its nmcli parsing broke on connection
names containing a colon or backslash -- verified against a real
NetworkManager profile.

panama-power-profile's set command always returned success regardless
of whether the write actually took. panama-keyring's daemon-origin
check picked whichever gnome-keyring-daemon process happened to
enumerate first in /proc, defeating the exact dual-daemon scenario it
exists to detect; it now resolves the PID that actually owns the
Secret Service D-Bus name. gnf aborted before running a firmware
update whenever the metadata was already current (a non-error exit
under set -e), and its flatpak update lacked the -y its own docs
promise.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:23:28 -04:00
Gabriel Brown 719ef2f38e Fix a keybind collision and wire two orphaned prefs 
SUPER+SHIFT+P was bound to both the colour picker and a window-resize
action; moved the resize bind to SUPER+SHIFT+Comma, next to its
existing N alias, and updated the README's keymap table to match.

workspaceBackAndForth and allowWorkspaceCycles were declared in the
preference schema but read nowhere, so they had no effect regardless
of what a user set them to; wired both into keybinds.lua's workspace
config, which is where they actually apply.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:23:19 -04:00
Gabriel Brown 9ba224d776 Finish threading the accent colour through the whole desktop 
The recent accent-colour setting only reached part of the desktop.
looks.lua still hardcoded the focused-window border and glow to blue,
so any hyprctl reload -- or every fresh session, for about a second --
reverted a chosen accent; it now reads accentName the same way it
already read colorScheme. The lock screen and terminal stayed blue
regardless of the chosen accent despite the setting's own description
claiming otherwise; panama-lock and panama-theme-apps now resolve and
apply the real accent.

AccentPicker built its swatch model from Theme.accents directly
instead of the schema's own options list, so the two could drift
silently; switched it to read the schema. Its hit target only covered
the swatch, not the name label added specifically for colour-vision
accessibility -- extended to the whole row. Settings search had no
route for the "appearance" group, so searching for the accent or
colour scheme landed on Home.

ColorScheme's hex-to-Hyprland helper assumed 6-digit colours and would
silently corrupt a future translucent one; fixed it to read from the
end of the string instead of the start. An accent-only change no
longer reruns the full colour-scheme pipeline. The gradient it builds
for the focused border now goes through SystemSettings' existing
serialiser instead of a second, under-escaped copy of the same logic.

The settings-ownership contract test enforced the old rule that
ColorScheme must never touch the focused border; updated it to verify
the real, intended rule instead of contradicting the code.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:23:16 -04:00
Gabriel Brown 8b59b78d9f Settle process-signal races across the services layer 
A Process's exited and streamFinished signals aren't guaranteed to
fire in order, and several services decided an outcome on whichever
fired first: KdeConnect could report a successful file transfer as
failed if exited landed before the real stdout payload; Clipboard
could present a failed history query as an empty-but-healthy one;
Brightness could strand the last queued write of a drag; SoundFeedback
and SystemLocale could drop or misapply a rapid second toggle/click
because re-arming an already-running Process is a no-op. All five now
wait for both signals and let the authoritative one decide, matching
the pattern HomeAssistantConfig.qml already used correctly.

Health's "copy report" never enabled stdin, so it copied nothing
while claiming success. Capture announced every recording as saved
regardless of the recorder's actual exit code. Connectivity never
restarted Bluetooth discovery when the adapter was enabled from an
already-open page. CalendarAgenda left the UI in "loading" forever if
its helper died at startup, and the helper itself could crash
unguarded instead of reporting unavailable. Geocoding silently
dropped a query typed while the previous one was still in flight.
Notifs leaked tracked-but-undisplayed notifications under Do Not
Disturb, and dismissAll() skipped them.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:23:07 -04:00
Gabriel Brown e6b4d3c1a1 Stop lists and sliders from losing input under the user 
WifiList and the notification toasts built their model from a plain
computed array, so any background property tick (a scan result, an
unrelated notification arriving) reassigned the whole array and the
Repeater destroyed and recreated every delegate -- including one with
an open, focused password field or an in-progress reply. Switched
both to a ScriptModel, which diffs by identity instead of resetting.

ValueSlider had its pointer-to-value mapping offset by 16px (the
hit-area margin was applied with the wrong sign), so 0% was
unreachable and every click landed to the right of where it was
placed -- affects every slider in the shell. SliderRow used -1 as a
sentinel for "nothing pending," which collides with legitimate
negative preference values like pointer sensitivity.

Dock intellihide read the globally focused workspace instead of each
monitor's own, so an empty workspace on one screen could hide the
dock on another; ActivityPanel rebuilt every row once a second during
a recording because the elapsed-time read lived in the model
construction instead of each row's own binding.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:22:58 -04:00
Gabriel Brown 70d8d32ee2 Fix the install pipeline and an idle-lock startup race 
The initial package list was quoted into a single bogus dnf argument
and every dnf error was discarded, so a fresh install silently skipped
most of it. Two package lists were never wired into the pipeline at
all, and change-settings ran before install-packages, so the vicinae
theme step was permanently skipped. Fixed the ordering, the quoting,
and stopped swallowing errors.

Separately, hypridle could start with its WAYLAND_DISPLAY condition
unmet if it raced the env-publish call, silently never starting --
and it's the only listener for the logind Lock signal. Made the start
wait on the environment synchronously. panama-idle also wrote its
generated config to a fixed temp path with no locking, so concurrent
applies could interleave into a corrupt file; switched to mktemp plus
an atomic mv.

Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
 2026-08-18 21:22:52 -04:00
Gabriel Brown c37ca3baee Make the accent colour choosable 
Phase 4, first slice. Theme.qml hardcoded the Prism pair, so the one
thing that carries every state meaning in the desktop -- focused, active,
on -- was the one thing nobody could change. 74 files read Theme.accent,
so making it a setting moves all of them at once.

Named accents rather than a colour picker, which is the design decision
worth defending. One hex cannot serve both schemes: a colour legible on
the Moon background is usually illegible on the Day one, and a picker
that lets someone build an unreadable desktop is not a feature. So each
name carries a curated pair per scheme, and every one of the sixteen
resulting colours measures at least 3:1 against the ground it sits on --
checked, not assumed. It is also GNOME's model, which is the parity
being chased.

The focused window border comes with it, and only because the ownership
rule made that safe. ColorScheme owns the inactive border as a
scheme-relative contrast role; the focused Prism border is the accent
role owned by the theme. Writing it from the accent would have been
reckless before that boundary existed, since a scheme change would have
erased the user's choice. Both borders are now pushed together, because
each accent carries separate light and dark pairs, so switching schemes
must restate the focused border too.

The gradient is written as a Lua table, not a string. The string form
carries only one stop, and passing two as a string is accepted and
silently keeps the previous value.

Swatches are drawn as the gradient they produce rather than as flat
dots, because the gradient is what is being chosen. Each carries its
name permanently rather than in a tooltip: telling swatches apart by
colour is precisely what someone with a colour vision deficiency cannot
do, which is also why the palette is named in the first place.

Verified end to end by switching to rose and watching the compositor
report eeff757f/eec099ff, then reverting.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-18 17:02:18 -04:00
Gabriel Brown bd5d030d91 Put power profiles and the colour scheme in the Control Center 
The panel is for "change it now" decisions, and two of the most obvious
were reachable only through Settings. Night Light was already here;
these were the genuine gaps.

The colour scheme is a grid toggle beside it. It writes the preference
and stops -- ColorScheme propagates the change to GTK, the portal, the
terminals, the launcher, btop, tmux and the lock screen, and nothing in
the panel needs to know that list. Light is the lit state because dark
is what Panama ships, and "active" reads as the non-default everywhere
else in this grid.

Power profiles are a summary row that expands into a list, matching how
the audio device lists behave. A row per profile rather than a cycling
button: there are three, and cycling passes through one you did not want
on a machine where the change is immediate and audible. The row hides
entirely where no power-profiles daemon is running, and the panel
re-reads the active profile on open, because the daemon owns it and
anything on the system can change it.

Worth recording, because it invalidates something I believed earlier in
this session: the live shell runs `quickshell --daemonize` and does NOT
hot-reload. Editing a file under config/dot/quickshell changes nothing
until the shell is restarted. The PID changes I had taken for hot
reloads were tests killing and restarting it. Both of these controls
were written, verified in a harness, and completely absent from the
running panel until the shell was restarted.

Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
 2026-08-18 16:25:59 -04:00
697 changed files with 35594 additions and 3777 deletions
Expand all files Collapse all files
.gitignore
+10 -2
View File
@@ -14,11 +14,19 @@
__pycache__/ __pycache__/
*.py[cod] *.py[cod]
# Generated from the colour scheme; machine state, not configuration. # Generated from the color scheme; machine state, not configuration.
/config/dot/kitty/current-theme.conf /config/dot/kitty/current-theme.conf
# Generated from the colour scheme; machine state, not configuration. # Generated from the color scheme; machine state, not configuration.
/config/dot/gtk-3.0/settings.ini /config/dot/gtk-3.0/settings.ini
/config/dot/gtk-4.0/settings.ini /config/dot/gtk-4.0/settings.ini
/config/dot/tmux/current-theme.conf /config/dot/tmux/current-theme.conf
/config/dot/hypr/hyprlock.conf /config/dot/hypr/hyprlock.conf
# Build products of the Vicinae extension. The source is the repository's; the
# dependency tree and the bundle it produces are machine state, rebuilt by
# `panama apps`.
/config/local/share/vicinae/extensions/*/node_modules/
/config/local/share/vicinae/extensions/*/dist/
/config/local/share/vicinae/extensions/*/build/
/config/local/share/vicinae/extensions/*/package-lock.json
README.md
+129 -16
View File
@@ -8,35 +8,64 @@ git clone https://git.gbrown.org/gib/Panama.git ~/.local/share/Panama
~/.local/share/Panama/install ~/.local/share/Panama/install
``` ```
`install` runs everything in `setup/scripts/` in order: `install` asks its questions first and then runs the stages in `setup/scripts/`
in order, without stopping again:
| Script | Does | | Script | Does |
|---|---| |---|---|
| `install-packages` | Repos (RPM Fusion, Terra, Hyprland COPR), then the four package lists in `setup/packages/` | | `interview` | Every prompt, before anything is installed. Answers last one run and are never written to a durable path |
| `link-dotfiles` | Symlinks `config/dot/<name>` → `~/.config/<name>` | | `install-packages` | Repos (RPM Fusion, Terra, Hyprland COPR), the package lists in `setup/packages/`, then whichever optional categories were chosen |
| `link-dotfiles` | Symlinks `config/dot/<name>` → `~/.config/<name>`, and seeds the wallpaper, cursor theme and Firefox chrome |
| `change-settings` | Copies `config/copy/` over `/`, applies gsettings, enables user services | | `change-settings` | Copies `config/copy/` over `/`, applies gsettings, enables user services |
| `link-vicinae-scripts` | Publishes the Vicinae script commands |
| `setup-identity` | git config, `gh auth login`, an SSH key — whichever were asked for |
| `install-hardware` | NVIDIA, Secure Boot enrollment, Fedora's extras, firmware — each only if it was asked for. Last, because enrollment and firmware are consumed at the next boot |
The run ends with a health summary from `panama-doctor`, which reports what is
actually running rather than what was attempted. It never fails the install: on a
fresh machine it legitimately reports things as not yet configured.
### Optional applications
Every machine gets the lists in `setup/packages/`. The interview also offers the
categories in `setup/packages/extras/` as a checklist, so a work laptop need not
acquire emulators and a desktop need not skip Steam. Nothing is preselected.
A category is one file. A bare line is a dnf package and a `flatpak:` line is a
Flathub ID, because the applications in a category do not all come from one
place. Adding a category is adding a file — the menu is read from the directory,
not written down anywhere.
Existing configs are moved to `config/old/` rather than overwritten. Existing configs are moved to `config/old/` rather than overwritten.
## Desktops ## The desktop
Panama configures **two** desktops that coexist. Both sessions stay available in Hyprland, with a shell written from scratch. It began as a replacement for a
GDM, so you can switch back and forth while you settle in. GNOME session — Forge for tiling, Dash-to-Dock, Openbar, Vitals — and was built
to reproduce it closely enough that muscle memory transferred: same keybinds,
same panel contents, same dock, same Tokyo Night Moon palette.
### GNOME That is history now rather than a second option. Panama installs and configures
The original setup: Forge for tiling, Dash-to-Dock, Openbar, Vitals, one desktop, and the GNOME session it grew out of is neither installed nor
AppIndicator support. Configured through `config/dot/forge/` and gsettings. configured here. What each piece replaced is recorded in
[`config/dot/hypr/DESKTOP-PARITY.md`](config/dot/hypr/DESKTOP-PARITY.md) and in
the comments of the components themselves, because knowing what a thing was
modelled on explains why it behaves the way it does.
### Hyprland GNOME is not gone from the machine: `gnome-control-center` is a declared
A from-scratch replacement built to reproduce the GNOME setup closely enough dependency, and Panama's own Settings hands off to it for the panels it
that muscle memory transfers — same keybinds, same panel contents, same dock, deliberately does not own — Online Accounts, Color, Sound, Network, Keyboard,
same Tokyo Night Moon palette. Privacy, Wellbeing, Accessibility, and System for users, date and time, region
and remote desktop. The allow-list in
[`services/SystemSettings.qml`](config/dot/quickshell/services/SystemSettings.qml)
is what decides; anything not on it is a panel Panama owns itself.
| Piece | What it is | | Piece | What it is |
|---|---| |---|---|
| `config/dot/hypr/` | Compositor config. **Lua, not hyprlang** — see its README | | `config/dot/hypr/` | Compositor config. **Lua, not hyprlang** — see its README |
| `config/dot/quickshell/` | The shell: bar, dock, Continuum overview, Settings, Screen Intelligence, focus sessions, quick settings, notifications, screenshot UI | | `config/dot/quickshell/` | The shell: bar, dock, Continuum overview, Settings, Screen Intelligence, focus sessions, quick settings, notifications, screenshot UI |
| `config/dot/vicinae/` | Raycast-style launcher, themed | | `config/containers/` | Container definitions systemd runs as units — currently the speech-to-text server behind dictation |
| `config/dot/vicinae/` | Raycast-style launcher, themed. Its commands live in `config/local/share/vicinae/` — script commands, and one compiled extension that adds web search with live suggestions |
| `config/dot/uwsm/` | Session environment (see the uwsm caveat in the hypr README) | | `config/dot/uwsm/` | Session environment (see the uwsm caveat in the hypr README) |
| `config/dot/wofi/` | Fallback launcher, in case the shell fails to start | | `config/dot/wofi/` | Fallback launcher, in case the shell fails to start |
| `config/dot/xdg-desktop-portal/` | Portal backend routing | | `config/dot/xdg-desktop-portal/` | Portal backend routing |
@@ -50,13 +79,97 @@ Log in as **"Hyprland (uwsm-managed)"**, not plain "Hyprland".
## Layout ## Layout
``` ```
bin/ Small user-facing commands on PATH bin/ Small user-facing commands on PATH; `panama` is the entry point
config/ config/
bash/ .bashrc, aliases, env (env is gitignored) bash/ .bashrc, aliases, env (env is gitignored)
copy/ Files copied verbatim over / (needs sudo) copy/ Files copied verbatim over / (needs sudo)
dot/ Symlinked into ~/.config dot/ Symlinked into ~/.config
firefox/ Vendored Firefox chrome, linked into the browser profile
containers/ Quadlets, linked into ~/.config/containers/systemd
local/ Icons, the cursor theme, and the launcher's commands and
extensions, linked into ~/.local/share
old/ Backups of whatever was replaced (gitignored) old/ Backups of whatever was replaced (gitignored)
wallpapers/ Copied into ~/Pictures/Wallpapers when absent
setup/ setup/
packages/ One package per line apps/ Applications built from source, one file each
lib/ Shared by more than one stage; the extras catalog reader
packages/ One package per line; extras/ holds the optional categories
scripts/ Run in order by ./install scripts/ Run in order by ./install
tests/ Contracts. See below
docs/ Settings reference, and the design specs behind the work
``` ```
## Tests
131 of them, under `tests/`. Run the lot, or a subset by pattern:
```sh
panama test # everything
panama test dock # just the ones matching "dock"
tests/setup/interview-contract # or one directly; they are plain executables
```
They are called contracts rather than unit tests because that is what they are:
each one pins a decision that was expensive to get right and is cheap to undo by
accident. Most read or measure the real thing — launching a shell to measure a
surface's geometry, standing stub commands on `PATH` to see what a stage would
have installed, running a script against a throwaway `HOME` — rather than
asserting things about source text, because the bugs worth catching here have all
been ones that source text looked fine for.
```
tests/setup/ The installer: the interview, package lists, hardware, extras
tests/quickshell/ The shell and its settings pages
tests/hypr/ The compositor config
```
## Projects
A project is the set of windows you open together — which applications, which
workspace each was on, and for a terminal, which directory it was sitting in.
Arrange the desktop, then run **Save Layout as Project** from the launcher and
name it; **Open Project** lays it out again.
Workspaces are recorded as positions rather than numbers, and opening a project
claims free ones, so it never lands on top of what you are already doing. An
application that refuses to open twice — Slack, Thunderbird, the browser — is
moved into place rather than launched again. Saved layouts are listed on the
Desktop settings page, which is also where they are removed.
## The `panama` command
```sh
panama update # review, commit and sync this repo
panama edit # open it in Neovim
panama doctor # what is actually running, not what was installed
panama test # every contract, or a subset by pattern
panama upgrade # re-run ./install from anywhere
panama apps # choose applications to install, by category
panama app # applications no repository carries; build one by name
```
`panama apps` is the optional-application catalog, opened after the fact. The
interview offers the same categories during `./install`, whole; this picks a
category and then the applications inside it, so a machine can acquire Slack in
March without having wanted Discord in January. Both read
`setup/lib/extras-catalog`, so the two cannot describe different catalogues.
A category is one file under `setup/packages/extras/`. A bare line is a dnf
package, a `flatpak:` line is a Flathub id, `| Name` gives the menu something
readable, and an indented line belongs to the entry above it — which is how OBS
carries its sixteen plugin extensions as one thing to tick.
`panama app` is deliberately not part of `./install`. Everything else Panama
installs comes from dnf or Flathub; these are built from source because no
packaged form exists, and a source build is slow, wants the network throughout,
and depends on an upstream that moves. That is the failure the interview exists
to prevent, so asking for one is something you do on purpose — and it is also
how you rebuild when a new version ships. Nothing is pinned: each build takes
the current upstream and reports a failure rather than working around it.
Adding one is adding a file to `setup/apps/`, and the file has to say why the
exception exists.
None of the scripts in this repository carry a `.sh` extension. A shebang and
the executable bit already select the interpreter, and the extension only
becomes something to keep in sync — which it did not stay.
bin/gnf
+5 -2
View File
@@ -152,11 +152,14 @@ case "$cmd" in
# 2.4) Run flatpak updates (user then system) # 2.4) Run flatpak updates (user then system)
flatpak update -y flatpak update -y
sudo flatpak update sudo flatpak update -y
# 2.5) Optional firmware via fwupd # 2.5) Optional firmware via fwupd
if $firmware; then if $firmware; then
sudo fwupdmgr refresh # fwupdmgr exits non-zero when metadata is already current -- that is
# not an error, but under 'set -e' it would abort the script before
# 'fwupdmgr update' ever runs.
sudo fwupdmgr refresh || true
sudo fwupdmgr update sudo fwupdmgr update
fi fi
bin/panama
+311
View File
@@ -7,6 +7,11 @@
# Commands: # Commands:
# update Commit & sync local changes (or just pull if clean) # update Commit & sync local changes (or just pull if clean)
# edit Open the Panama repo in Neovim # edit Open the Panama repo in Neovim
# doctor Report what is actually running on this machine
# test Run every contract under tests/
# upgrade Re-run the installer from anywhere
# apps Choose applications to install, by category
# app Build and install an application that no repository packages
# help Show this help # help Show this help
# #
# Designed to grow: add new subcommands as cmd_<name> functions and # Designed to grow: add new subcommands as cmd_<name> functions and
@@ -62,6 +67,17 @@ ${BOLD}Commands:${RESET}
${GREEN}update${RESET} Review, commit & sync local changes. If the working tree is ${GREEN}update${RESET} Review, commit & sync local changes. If the working tree is
clean it simply runs 'git pull'. clean it simply runs 'git pull'.
${GREEN}edit${RESET} Open the Panama repo in Neovim. ${GREEN}edit${RESET} Open the Panama repo in Neovim.
${GREEN}doctor${RESET} Report what is actually running on this machine, rather
than what was installed. Takes --summary for one line per check.
${GREEN}test${RESET} Run every contract under tests/. Give it a pattern to run
a subset: 'panama test dock' runs the ones matching 'dock'.
${GREEN}upgrade${RESET} Re-run ./install from anywhere. Safe: every stage is
idempotent and this is the documented upgrade path.
${GREEN}apps${RESET} Choose applications to install: pick a category, then tick
what you want. The same catalog ./install offers, minus the
install.
${GREEN}app${RESET} Build and install an application that neither dnf nor
Flathub carries. With no name, lists what is available.
${GREEN}help${RESET} Show this help (also -h, --help). ${GREEN}help${RESET} Show this help (also -h, --help).
${BOLD}Options:${RESET} ${BOLD}Options:${RESET}
@@ -71,6 +87,12 @@ ${BOLD}Options:${RESET}
${BOLD}Examples:${RESET} ${BOLD}Examples:${RESET}
$PROGRAM update $PROGRAM update
$PROGRAM edit $PROGRAM edit
$PROGRAM doctor --summary
$PROGRAM test dock
$PROGRAM upgrade
$PROGRAM apps
$PROGRAM app
$PROGRAM app chatgpt-desktop
EOF EOF
} }
@@ -205,6 +227,290 @@ cmd_edit() {
exec nvim . exec nvim .
} }
# ----------------------------------------------------------------------------
# Command: doctor
# ----------------------------------------------------------------------------
#
# The health check already exists and the installer already runs it; what it did
# not have was a way to reach it from a terminal. Everything is passed straight
# through, so --summary and anything added later work without this knowing about
# them.
cmd_doctor() {
local doctor="$PANAMA_DIR/config/dot/quickshell/scripts/panama-doctor"
if [[ ! -x "$doctor" ]]; then
err "panama-doctor is missing from $doctor"
exit 1
fi
exec "$doctor" "$@"
}
# ----------------------------------------------------------------------------
# Command: test
# ----------------------------------------------------------------------------
#
# The contracts are the main safety net in this repository and had no entry
# point: 121 executables with no runner and no mention in the README, which is
# most of the way to not having them.
#
# Each runs in its own process and a failure does not stop the rest, because the
# useful output is the whole list of what is broken rather than the first thing
# that broke. The exit code is what a caller can act on.
cmd_test() {
local pattern="${1:-}"
local -a suite=()
# Executables, plus the Python suites. Those are unittest files rather than
# executables, and collecting only what has the executable bit would skip them
# without saying so -- which is how all three came to be run by nothing at all.
# A runner with a blind spot is worse than no runner, because it reports PASS.
while IFS= read -r path; do
[[ -x "$path" || "$path" == *_test.py ]] || continue
[[ -z "$pattern" || "$path" == *"$pattern"* ]] && suite+=("$path")
done < <(find "$PANAMA_DIR/tests" -type f -not -path '*/fixtures/*' -not -path '*__pycache__*' | sort)
if (( ${#suite[@]} == 0 )); then
err "No contracts match '${pattern}'"
exit 1
fi
info "Running ${#suite[@]} contract(s)"
local -a failed=()
local path name
local -a runner
for path in "${suite[@]}"; do
name="${path#"$PANAMA_DIR"/tests/}"
if [[ "$path" == *_test.py ]]; then
runner=(python3 "$path")
else
runner=("$path")
fi
if "${runner[@]}" >/dev/null 2>&1; then
ok "$name"
else
err "$name"
failed+=("$name")
fi
done
header "Result"
if (( ${#failed[@]} == 0 )); then
ok "${#suite[@]} contract(s) passed"
return 0
fi
err "${#failed[@]} of ${#suite[@]} failed:"
printf ' %s\n' "${failed[@]}" >&2
warn "Run one on its own to see why: ${BOLD}${PANAMA_DIR}/tests/<name>${RESET}"
return 1
}
# ----------------------------------------------------------------------------
# Command: upgrade
# ----------------------------------------------------------------------------
#
# ./install is the upgrade path -- every stage is idempotent and re-running is
# the documented way to repair a machine. This only saves remembering where the
# repository lives.
cmd_upgrade() {
local installer="$PANAMA_DIR/install"
if [[ ! -x "$installer" ]]; then
err "The installer is missing from $installer"
exit 1
fi
info "Re-running ${BOLD}${installer}${RESET}"
cd "$PANAMA_DIR"
exec "$installer" "$@"
}
# ----------------------------------------------------------------------------
# Command: app
# ----------------------------------------------------------------------------
#
# The applications that neither dnf nor Flathub carries, built from source into
# a package dnf can still own and remove.
#
# Deliberately NOT part of ./install. A source build is slow, wants the network
# for the whole of it, and depends on an upstream that moves -- which is exactly
# the failure the interview exists to prevent: twenty minutes in, a prompt or an
# error, with nobody at the keyboard. Asking for one of these is a thing you do
# on purpose, and it is also the rebuild path when a new version ships.
#
# Nothing is pinned. Each build takes the current default branch and the current
# upstream release, and says so when it fails. A recorded version is a 404
# waiting to happen -- sunhat proved that three times over.
APPS_DIR="$PANAMA_DIR/setup/apps"
APPS_WORK="${XDG_CACHE_HOME:-$HOME/.cache}/panama/apps"
cmd_app() {
local name="${1:-}"
if [[ -z "$name" ]]; then
header "Applications"
printf 'Built from source, because no repository carries them.\n\n'
local file
for file in "$APPS_DIR"/*; do
[[ -f "$file" ]] || continue
local description=""
# shellcheck source=/dev/null
source "$file"
printf ' %s%-18s%s %s\n' "$GREEN" "$(basename "$file")" "$RESET" "$description"
done
printf '\nBuild one with: %s%s app <name>%s\n' "$BOLD" "$PROGRAM" "$RESET"
return 0
fi
local definition="$APPS_DIR/$name"
if [[ ! -f "$definition" ]]; then
err "No such application: '$name'"
printf "Run '%s app' to see what is available.\n" "$PROGRAM" >&2
exit 1
fi
local description="" repo=""
# shellcheck source=/dev/null
source "$definition"
[[ -n "$repo" ]] || { err "$name declares no repository"; exit 1; }
# The checkout lives in the cache because it is entirely rebuildable and
# should never be mistaken for something to keep. Existing checkouts are
# reset to upstream rather than merged: a local edit in a build tree is not
# something to preserve silently.
local tree="$APPS_WORK/$name"
if [[ -d "$tree/.git" ]]; then
info "Updating $name"
git -C "$tree" fetch --depth 1 origin HEAD || { err "Could not reach $repo"; exit 1; }
git -C "$tree" reset --hard FETCH_HEAD >/dev/null
else
info "Cloning $name"
mkdir -p "$APPS_WORK"
rm -rf "$tree"
git clone --depth 1 "$repo" "$tree" || { err "Could not clone $repo"; exit 1; }
fi
info "Building ${BOLD}${name}${RESET} — this takes a while and needs the network"
if ( cd "$tree" && build ); then
ok "$name installed"
printf 'Built from %s\n' "$(git -C "$tree" rev-parse --short HEAD)"
else
err "$name failed to build"
printf 'The tree is left at %s so the failure can be read.\n' "$tree" >&2
printf 'This builds against upstream HEAD, so a break there breaks this.\n' >&2
exit 1
fi
}
# ----------------------------------------------------------------------------
# Command: apps
# ----------------------------------------------------------------------------
# The optional applications, chosen a few at a time rather than all at once.
#
# ./install offers the same catalog as whole categories, because during a first
# install you want coarse and fast. This is the other end of it: pick a
# category, then tick the applications inside, and install just those. Both read
# setup/lib/extras-catalog, so neither can drift from the other.
#
# Source-built applications appear here too, as their own category. They are not
# part of ./install for good reason -- a build is slow, wants the network
# throughout, and can fail on an upstream that moved -- but "choose, then
# install" is exactly the right shape for them, which is what this is.
cmd_apps() {
if ! command -v gum >/dev/null 2>&1; then
err "gum is not installed. It is in setup/packages/initial-packages; run 'panama upgrade'."
exit 1
fi
# shellcheck source=../setup/lib/extras-catalog
source "$PANAMA_DIR/setup/lib/extras-catalog"
local extras_dir="$PANAMA_DIR/setup/packages/extras"
local apps_dir="$PANAMA_DIR/setup/apps"
local -a categories=()
mapfile -t categories < <(catalog_categories "$extras_dir")
[[ -d "$apps_dir" ]] && categories+=("built from source")
(( ${#categories[@]} > 0 )) || { err "No application categories found."; exit 1; }
local category
category="$(gum choose --header "Which kind of application?" "${categories[@]}")" || return 0
[[ -n "$category" ]] || return 0
if [[ "$category" == "built from source" ]]; then
cmd_apps_source "$apps_dir"
return
fi
local file="$extras_dir/$category"
local -a labels=() targets=()
local target label marker
while IFS=$'\t' read -r target label; do
[[ -n "$target" ]] || continue
# Marked, not hidden: reinstalling what is present is harmless, but a menu
# that silently omits it leaves you wondering where it went.
if catalog_installed "$target"; then marker=" (installed)"; else marker=""; fi
targets+=("$target")
labels+=("$label$marker")
done < <(catalog_entries "$file")
local chosen
chosen="$(gum choose --no-limit --header "$category — space to select, enter to accept" "${labels[@]}")" || return 0
[[ -n "$chosen" ]] || { info "Nothing selected."; return 0; }
# Back from labels to install targets, then out to everything each one carries.
local -a install_targets=()
local pick i
while IFS= read -r pick; do
[[ -n "$pick" ]] || continue
for i in "${!labels[@]}"; do
if [[ "${labels[$i]}" == "$pick" ]]; then
mapfile -t -O "${#install_targets[@]}" install_targets < <(catalog_targets "$file" "${targets[$i]}")
break
fi
done
done <<< "$chosen"
local -a dnf_packages=() flatpak_ids=()
for target in "${install_targets[@]}"; do
if [[ "$target" == flatpak:* ]]; then flatpak_ids+=("${target#flatpak:}"); else dnf_packages+=("$target"); fi
done
header "About to install"
(( ${#dnf_packages[@]} > 0 )) && printf ' dnf %s\n' "${dnf_packages[*]}"
(( ${#flatpak_ids[@]} > 0 )) && printf ' flatpak %s\n' "${flatpak_ids[*]}"
echo
confirm "Install these?" || { warn "Nothing installed."; return 0; }
if (( ${#dnf_packages[@]} > 0 )); then
info "Installing ${#dnf_packages[@]} package(s) with dnf"
sudo dnf install -y "${dnf_packages[@]}" || warn "Some packages did not install"
fi
if (( ${#flatpak_ids[@]} > 0 )); then
info "Installing ${#flatpak_ids[@]} flatpak(s)"
sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo >/dev/null
sudo flatpak install -y flathub "${flatpak_ids[@]}" || warn "Some flatpaks did not install"
fi
ok "Done."
}
# The source-built applications, offered by the same two-step flow and handed to
# the existing `panama app` so there is one build path, not two.
cmd_apps_source() {
local apps_dir="$1"
local -a names=()
mapfile -t names < <(for f in "$apps_dir"/*; do [[ -f "$f" ]] && basename "$f"; done)
(( ${#names[@]} > 0 )) || { err "No applications in $apps_dir."; return 1; }
local chosen
chosen="$(gum choose --no-limit --header "Built from source — these take a while" "${names[@]}")" || return 0
[[ -n "$chosen" ]] || { info "Nothing selected."; return 0; }
local name
while IFS= read -r name; do
[[ -n "$name" ]] || continue
header "Building $name"
cmd_app "$name" || warn "$name did not build"
done <<< "$chosen"
}
# ---------------------------------------------------------------------------- # ----------------------------------------------------------------------------
# Dispatcher # Dispatcher
# ---------------------------------------------------------------------------- # ----------------------------------------------------------------------------
@@ -213,6 +519,11 @@ main() {
case "$cmd" in case "$cmd" in
update) shift; cmd_update "$@" ;; update) shift; cmd_update "$@" ;;
edit) shift; cmd_edit "$@" ;; edit) shift; cmd_edit "$@" ;;
doctor) shift; cmd_doctor "$@" ;;
test) shift; cmd_test "$@" ;;
upgrade) shift; cmd_upgrade "$@" ;;
app) shift; cmd_app "$@" ;;
apps) shift; cmd_apps "$@" ;;
help|-h|--help|"") usage ;; help|-h|--help|"") usage ;;
--version) printf '%s %s\n' "$PROGRAM" "$VERSION" ;; --version) printf '%s %s\n' "$PROGRAM" "$VERSION" ;;
*) *)
config/bash/.bashrc
+4 -5
View File
@@ -24,8 +24,7 @@ else
fi fi
export PATH export PATH
fi fi
. "$HOME/.cargo/env" # rustup writes this file, and initial-packages installs rustup rather than
# running rustup-init -- so on a fresh machine it does not exist yet and an
# >>> Codex installer >>> # unguarded source made every single shell start with an error.
export PATH="/home/gib/.local/bin:$PATH" [ -f "$HOME/.cargo/env" ] && . "$HOME/.cargo/env"
# <<< Codex installer <<<
config/bash/shell
+12 -3
View File
@@ -22,8 +22,10 @@ export DOTNETPATH="$HOME/.dotnet/tools"
# Set complete path # Set complete path
export PATH="$HOME/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$PANAMA_PATH/bin:$BUN_INSTALL/bin:$CARGO_PATH/bin:$PNPM_HOME/bin:$PYENV_ROOT/bin:$HOME/.rbenv/bin:/usr/lib/ccache/bin/:$GOPATH/bin:$DOTNETPATH" export PATH="$HOME/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$PANAMA_PATH/bin:$BUN_INSTALL/bin:$CARGO_PATH/bin:$PNPM_HOME/bin:$PYENV_ROOT/bin:$HOME/.rbenv/bin:/usr/lib/ccache/bin/:$GOPATH/bin:$DOTNETPATH"
# Nvm # Nvm. Guarded because the file belongs to the nvm package: before that is
source /etc/profile.d/nvm.sh # installed it does not exist, and an unconditional source means every shell on
# a fresh machine opens with an error.
[ -f /etc/profile.d/nvm.sh ] && source /etc/profile.d/nvm.sh
# Auto-switch Node version when entering a directory with .nvmrc # Auto-switch Node version when entering a directory with .nvmrc
_nvm_auto_use() { _nvm_auto_use() {
if [[ -f .nvmrc ]]; then if [[ -f .nvmrc ]]; then
@@ -41,4 +43,11 @@ fi
eval "$(zoxide init bash)" eval "$(zoxide init bash)"
# Oh My Posh # Oh My Posh
eval "$(oh-my-posh init bash --config $PANAMA_PATH/config/dot/ohmyposh/gib.omp.json)" # Guarded for the same reason the nvm source above is: oh-my-posh is a package,
# and a shell opened before it is installed -- a stage re-run by hand, an
# install that failed partway -- would otherwise print command-not-found on
# every prompt. An unthemed prompt is a worse shell; an erroring one is a
# broken-looking machine.
if command -v oh-my-posh >/dev/null 2>&1; then
eval "$(oh-my-posh init bash --config "$PANAMA_PATH/config/dot/ohmyposh/gib.omp.json")"
fi
config/containers/whisper/panama-whisper.container
+53
View File
@@ -0,0 +1,53 @@
# Dictation's speech-to-text server, as a Quadlet.
#
# Quadlet rather than a hand-written unit wrapping `podman run`: systemd
# generates the unit from this at boot, so there is one description of the
# container rather than a unit and a command line drifting apart.
#
# Upstream's own Vulkan image, not one built here. whisper.cpp publishes it, it
# already contains whisper-server, and it is maintained by the people who write
# the thing -- a Containerfile in this repository would be a compile step on
# every machine and a build to keep working, in exchange for nothing.
#
# Vulkan rather than ROCm, which is the reason this tag and not another. ROCm's
# runtime is seven gigabytes and serves AMD alone; Vulkan compute runs on AMD,
# Intel and NVIDIA through whatever Mesa driver a machine already has. These
# machines are a mix of all three, and this image works on every one of them.
#
# Deliberately no [Install] section. whisper-server loads the model when it
# starts and holds it, so a container started at login costs half a gigabyte of
# memory in every session where nobody dictates. panama-dictate starts it on the
# first press of the key, and it stays up for the rest of the session.
[Unit]
Description=Panama dictation speech-to-text server
Documentation=https://github.com/ggml-org/whisper.cpp
[Container]
Image=ghcr.io/ggml-org/whisper.cpp:main-vulkan
# The image's own entrypoint is a shell; the server is what is wanted.
Entrypoint=/app/build/bin/whisper-server
Exec=--host 0.0.0.0 --port 8791 --model /models/ggml-small.bin --inference-path /inference
# The whole directory rather than a renderD node: the number differs between
# machines, and this file is meant to be identical on all of them.
AddDevice=/dev/dri
# The model is host state -- fetched once, kept across image updates, and shared
# with nothing else. Read-only because the server never writes to it, and :z
# relabels for SELinux, which is enforcing on Fedora.
Volume=%h/.local/share/panama/whisper:/models:ro,z
# Loopback only. This transcribes whatever it is sent, with no authentication,
# and has no business being reachable from the network.
PublishPort=127.0.0.1:8791:8791
NoNewPrivileges=true
[Service]
# Loading the model takes a few seconds on a cold start; systemd should wait for
# it rather than give up, and should bring the server back if it dies mid-session.
TimeoutStartSec=180
Restart=on-failure
RestartSec=3
config/copy/etc/systemd/user/xdg-document-portal.service.d/panama-stale-mount.conf
+22
View File
@@ -0,0 +1,22 @@
# Clear the mountpoint before starting, so a start that follows a crash lands
# on clean ground.
#
# This service provides the fuse mount at /run/user/$UID/doc, and bwrap binds
# doc/by-app/<id> into every flatpak sandbox it builds. No mount, no sandbox,
# no application -- all of them, not one, because they all share this.
#
# The shipped unit is Type=dbus with Restart=no, so nothing restarts it on
# failure: it comes back only when something next calls its bus name. On this
# machine that was a flatpak launching two seconds after the daemon exited
# 21, and the activation raced the dying instance's fuse state and came up
# with no mount at all. systemctl then reports active (running) -- the
# fusermount3 helper is even still there as a child -- while every new sandbox
# fails. Nothing running at the time notices, because a sandbox needs the
# mount only while it is being built, so the breakage surfaces whenever you
# next open something you had not opened yet. Here that was three days later,
# and it was the second time: the first was written off as a one-off.
#
# `-` because a clean start has nothing to unmount and fusermount3 exits 1
# saying so, which is not a failure to start on.
[Service]
ExecStartPre=-/usr/bin/fusermount3 -u /run/user/%U/doc
config/copy/usr/share/nautilus-python/extensions/nautilus_open_any_terminal.py
-614
View File
@@ -1,614 +0,0 @@
"""nautilus extension: nautilus_open_any_terminal"""
# based on: https://github.com/gnunn1/tilix/blob/master/data/nautilus/open-tilix.py
import ast
import re
import shlex
from dataclasses import dataclass, field
from functools import cache
from gettext import gettext, translation
from os.path import expanduser
from subprocess import Popen
from typing import Optional
from urllib.parse import quote, unquote, urlparse
from gi import require_version
try:
require_version("Nautilus", "4.1")
except ValueError:
require_version("Nautilus", "4.0")
require_version("Gtk", "4.0")
from gi.repository import Nautilus as FileManager
API_VERSION = "4.1"
from gi.repository import Gio, GLib, GObject, Gtk # noqa: E402 pylint: disable=wrong-import-position
@dataclass(frozen=True)
class Terminal:
"""Data class representing a terminal configuration."""
name: str
workdir_arguments: Optional[list[str]] = None
new_tab_arguments: Optional[list[str]] = None
new_window_arguments: Optional[list[str]] = None
command_arguments: list[str] = field(default_factory=lambda: ["-e"])
flatpak_package: Optional[str] = None
_ = gettext
for localedir in [expanduser("~/.local/share/locale"), "/usr/share/locale"]:
try:
trans = translation("nautilus-open-any-terminal", localedir)
trans.install()
_ = trans.gettext
break
except FileNotFoundError:
continue
TERMINALS = {
"alacritty": Terminal("Alacritty"),
"app2unit-term": Terminal("app2unit-term"),
"blackbox": Terminal(
"Black Box",
workdir_arguments=["--working-directory"],
command_arguments=["-c"],
flatpak_package="com.raggesilver.BlackBox",
),
"blackbox-terminal": Terminal(
"Black Box",
workdir_arguments=["--working-directory"],
command_arguments=["-c"],
),
"bobcat": Terminal(
"Bobcat",
workdir_arguments=["--working-dir"],
command_arguments=["--"],
),
"cool-retro-term": Terminal("cool-retro-term", workdir_arguments=["--workdir"]),
"custom": Terminal(_("Terminal"), command_arguments=[]),
"contour": Terminal(
"Contour",
workdir_arguments=["--working-directory"],
flatpak_package="org.contourterminal.Contour",
),
"cosmic-term": Terminal("COSMIC Terminal"),
"deepin-terminal": Terminal("Deepin Terminal"),
"ddterm": Terminal(
"Drop down Terminal extension",
workdir_arguments=["--working-directory"],
flatpak_package="com.github.amezin.ddterm",
),
"foot": Terminal("Foot"),
"footclient": Terminal("FootClient"),
"ghostty": Terminal("Ghostty"),
"gnome-terminal": Terminal("Terminal", new_tab_arguments=["--tab"], command_arguments=["--"]),
"guake": Terminal("Guake", workdir_arguments=["--show", "--new-tab"]),
"kermit": Terminal("Kermit"),
"kgx": Terminal("Console", new_tab_arguments=["--tab"]),
"kitty": Terminal("Kitty"),
"konsole": Terminal("Konsole", new_tab_arguments=["--new-tab"]),
"mate-terminal": Terminal("Mate Terminal", new_tab_arguments=["--tab"]),
"mlterm": Terminal("Mlterm"),
"ptyxis": Terminal(
"Ptyxis",
workdir_arguments=["-d"],
command_arguments=["--"],
new_tab_arguments=["--tab"],
new_window_arguments=["--new-window"],
flatpak_package="app.devsuite.Ptyxis",
),
"ptyxis-nightly": Terminal(
"Ptyxis",
workdir_arguments=["-d"],
command_arguments=["--"],
new_tab_arguments=["--tab"],
new_window_arguments=["--new-window"],
flatpak_package="org.gnome.Ptyxis.Devel",
),
"qterminal": Terminal("QTerminal"),
"rio": Terminal("Rio"),
"sakura": Terminal("Sakura"),
"st": Terminal("Simple Terminal"),
"tabby": Terminal("Tabby", command_arguments=["run"], workdir_arguments=["open"]),
"terminator": Terminal("Terminator", new_tab_arguments=["--new-tab"]),
"terminology": Terminal("Terminology"),
"terminus": Terminal("Terminus"),
"termite": Terminal("Termite"),
"tilix": Terminal("Tilix", flatpak_package="com.gexperts.Tilix"),
"urxvt": Terminal("rxvt-unicode"),
"urxvtc": Terminal("urxvtc"),
"uwsm-terminal": Terminal("uwsm-terminal"),
"uxterm": Terminal("UXTerm"),
"warp": Terminal(
"Warp",
new_tab_arguments=["--virtual-arg-for-tabs"], # This is just to indicate tab support
),
"wezterm": Terminal(
"Wez's Terminal Emulator",
workdir_arguments=["--cwd"],
new_tab_arguments=["start", "--new-tab"],
new_window_arguments=["start"],
flatpak_package="org.wezfurlong.wezterm",
),
"xfce4-terminal": Terminal("Xfce Terminal", new_tab_arguments=["--tab"]),
"xterm": Terminal("XTerm"),
}
FLATPAK_PARMS = ["off", "system", "user"]
terminal = "gnome-terminal"
terminal_cmd: list[str] = None # type: ignore
terminal_data: Terminal = TERMINALS["gnome-terminal"]
new_tab = False
flatpak = FLATPAK_PARMS[0]
custom_local_command: str
custom_remote_command: str
GSETTINGS_PATH = "com.github.stunkymonkey.nautilus-open-any-terminal"
GSETTINGS_KEYBINDINGS = "keybindings"
GSETTINGS_BIND_REMOTE = "bind-remote"
GSETTINGS_TERMINAL = "terminal"
GSETTINGS_NEW_TAB = "new-tab"
GSETTINGS_FLATPAK = "flatpak"
GSETTINGS_USE_GENERIC_TERMINAL_NAME = "use-generic-terminal-name"
GSETTINGS_CUSTOM_LOCAL_COMMAND = "custom-local-command"
GSETTINGS_CUSTOM_REMOTE_COMMAND = "custom-remote-command"
REMOTE_URI_SCHEME = ["ftp", "sftp"]
# Adapted from https://www.freedesktop.org/software/systemd/man/latest/os-release.html
def read_os_release():
"""Read and parse the OS release information."""
possible_os_release_paths = ["/etc/os-release", "/usr/lib/os-release"]
for file_path in possible_os_release_paths:
try:
with open(file_path, mode="r", encoding="utf-8") as os_release:
for line_number, line in enumerate(os_release, start=1):
line = line.rstrip()
if not line or line.startswith("#"):
continue
result = re.match(r"([A-Z][A-Z_0-9]+)=(.*)", line)
if result:
name, val = result.groups()
if val and val[0] in "\"'":
val = ast.literal_eval(val)
yield name, val
else:
raise OSError(f"{file_path}:{line_number}: bad line {line!r}")
except FileNotFoundError:
continue
@cache
def distro_id() -> set[str]:
"""get the set of distribution ids"""
try:
os_release = dict(read_os_release())
except OSError:
return set(["unknown"])
ids = [os_release["ID"]]
if id_like := os_release.get("ID_LIKE"):
ids.extend(id_like.split(" "))
return set(ids)
def parse_custom_command(command: str, data: str | list[str]) -> list[str]:
"""Substitute every '%s' in the command with data and split it into arguments"""
if isinstance(data, str):
data = [data]
return shlex.split(command.replace("%s", shlex.join(data)))
def run_command_in_terminal(command: list[str], *, cwd: str | None = None):
if terminal == "custom":
cmd = parse_custom_command(custom_remote_command, command)
else:
cmd = terminal_cmd.copy()
if cwd and terminal_data.workdir_arguments:
cmd.extend(terminal_data.workdir_arguments)
cmd.append(cwd)
cmd.extend(terminal_data.command_arguments)
cmd.extend(command)
Popen(cmd, cwd=cwd) # pylint: disable=consider-using-with
def ssh_command_from_uri(uri: str, *, is_directory: bool):
"""Creates an ssh command that executes or cd's into remote uri"""
result = urlparse(uri)
cmd = ["ssh", "-t"]
if result.username:
cmd.append(f"{result.username}@{result.hostname}")
else:
cmd.append(result.hostname) # type: ignore
if result.port:
cmd.append("-p")
cmd.append(str(result.port))
target = shlex.quote(unquote(result.path))
if is_directory:
cmd.extend(["cd", target, ";", "exec", "${SHELL:-/bin/sh}", "-l"])
else:
cmd.extend(["exec", target])
return cmd
def open_remote_terminal_in_uri(uri: str):
"""Open a new remote terminal"""
run_command_in_terminal(ssh_command_from_uri(uri, is_directory=True))
def open_local_terminal_in_uri(uri: str):
"""open the new terminal with correct path"""
result = urlparse(uri)
filename = unquote(result.path)
if result.scheme == "admin":
run_command_in_terminal(["sudo", "-s"], cwd=filename)
return
if terminal == "warp":
# Force new_tab to be considered even without traditional tab arguments
Popen( # pylint: disable=consider-using-with
["xdg-open", f"warp://action/new_{'tab' if new_tab else 'window'}?path={result.path}"]
)
return
cmd = terminal_cmd.copy()
if terminal == "custom":
cmd = parse_custom_command(custom_local_command, filename)
elif filename and terminal_data.workdir_arguments:
cmd.extend(terminal_data.workdir_arguments)
cmd.append(filename)
Popen(cmd, cwd=filename) # pylint: disable=consider-using-with
def directory_menu_item_id(*, foreground: bool, remote: bool):
return f"OpenTerminal::open{'_' if foreground else '_bg_'}{'remote' if remote else 'file'}_item"
def executable_menu_item_id(*, remote: bool):
return f"OpenTerminal::execute{'_remote_' if remote else '_file_'}item"
def get_directory_menu_items(
file: FileManager.FileInfo, callback, *, foreground: bool, terminal_name: str | None = None
):
items = []
remote = file.get_uri_scheme() in REMOTE_URI_SCHEME
terminal_name = terminal_name or terminal_data.name
if remote:
if foreground:
REMOTE_LABEL = _("Open in Remote {}")
REMOTE_TIP = _("Open Remote {} in {}")
LOCAL_LABEL = _("Open in Local {}")
LOCAL_TIP = _("Open Local {} in {}")
tip = REMOTE_TIP.format(terminal_name, file.get_name())
else:
REMOTE_LABEL = _("Open Remote {} Here")
REMOTE_TIP = _("Open Remote {} in This Directory")
LOCAL_LABEL = _("Open Local {} Here")
LOCAL_TIP = _("Open Local {} in This Directory")
tip = REMOTE_TIP.format(terminal_name)
item = FileManager.MenuItem(
name=directory_menu_item_id(foreground=foreground, remote=True),
label=REMOTE_LABEL.format(terminal_name),
tip=tip,
)
item.connect("activate", callback, file, True)
items.append(item)
elif foreground:
LOCAL_LABEL = _("Open in {}")
LOCAL_TIP = _("Open {} in {}")
else:
LOCAL_LABEL = _("Open {} Here")
LOCAL_TIP = _("Open {} in This Directory")
# Let wezterm handle opening a local terminal
if terminal == "wezterm" and flatpak == "off":
return items
if foreground:
tip = LOCAL_TIP.format(terminal_name, file.get_name())
else:
tip = LOCAL_TIP.format(terminal_name)
item = FileManager.MenuItem(
name=directory_menu_item_id(foreground=foreground, remote=False),
label=LOCAL_LABEL.format(terminal_name),
tip=tip,
)
item.connect("activate", callback, file, False)
items.append(item)
return items
def get_executable_menu_items(file: FileManager.FileInfo, callback, *, terminal_name: str | None = None):
items = []
remote = file.get_uri_scheme() in REMOTE_URI_SCHEME
terminal_name = terminal_name or terminal_data.name
if remote:
REMOTE_LABEL = _("Execute in Remote {}")
REMOTE_TIP = _("Execute {} in {} via SSH")
LOCAL_LABEL = _("Execute in Local {}")
LOCAL_TIP = _("Execute {} in Local {}")
tip = REMOTE_TIP.format(file.get_name(), terminal_name)
item = FileManager.MenuItem(
name=executable_menu_item_id(remote=True),
label=REMOTE_LABEL.format(terminal_name),
tip=tip,
)
item.connect("activate", callback, file, True)
items.append(item)
else:
LOCAL_LABEL = _("Execute in {}")
LOCAL_TIP = _("Execute {} in {}")
tip = LOCAL_TIP.format(file.get_name(), terminal_name)
item = FileManager.MenuItem(
name=executable_menu_item_id(remote=False),
label=LOCAL_LABEL.format(terminal_name),
tip=tip,
)
item.connect("activate", callback, file, False)
items.append(item)
return items
def is_executable(file: Gio.File) -> bool:
try:
attributes = file.query_info("access::can-execute", Gio.FileQueryInfoFlags.NONE)
except GLib.Error:
return False
return attributes.get_attribute_boolean("access::can-execute")
def set_terminal_args(*_args):
# pylint: disable=possibly-used-before-assignment
"""set the terminal_cmd to the correct values"""
global new_tab
global flatpak
global terminal_cmd
global terminal_data
global custom_local_command
global custom_remote_command
value = _gsettings.get_string(GSETTINGS_TERMINAL)
newer_tab = _gsettings.get_boolean(GSETTINGS_NEW_TAB)
flatpak = FLATPAK_PARMS[_gsettings.get_enum(GSETTINGS_FLATPAK)]
new_terminal_data = TERMINALS.get(value)
if not new_terminal_data:
print(f'open-any-terminal: unknown terminal "{value}"')
return
global terminal
terminal = value
terminal_data = new_terminal_data
if newer_tab and terminal_data.new_tab_arguments:
new_tab = newer_tab
new_tab_text = "opening in a new tab"
else:
new_tab_text = "opening a new window"
if newer_tab and not terminal_data.new_tab_arguments:
new_tab_text += " (terminal does not support tabs)"
if flatpak != FLATPAK_PARMS[0] and terminal_data.flatpak_package is not None:
terminal_cmd = ["flatpak", "run", "--" + flatpak, terminal_data.flatpak_package]
flatpak_text = f"with flatpak as {flatpak}"
else:
terminal_cmd = [terminal]
if terminal == "blackbox" and "fedora" in distro_id():
# It's called like this on fedora
terminal_cmd[0] = "blackbox-terminal"
flatpak = FLATPAK_PARMS[0]
flatpak_text = ""
if terminal == "custom":
terminal_cmd = []
custom_local_command = _gsettings.get_string(GSETTINGS_CUSTOM_LOCAL_COMMAND)
custom_remote_command = _gsettings.get_string(GSETTINGS_CUSTOM_REMOTE_COMMAND)
elif new_tab and terminal_data.new_tab_arguments:
terminal_cmd.extend(terminal_data.new_tab_arguments)
elif terminal_data.new_window_arguments:
terminal_cmd.extend(terminal_data.new_window_arguments)
print(f'open-any-terminal: terminal is set to "{terminal}" {new_tab_text} {flatpak_text}')
if API_VERSION == ("4.0", "4.1"):
class OpenAnyTerminalShortcutProvider(GObject.GObject, FileManager.MenuProvider):
"""Provide keyboard shortcuts for opening terminals in Nautilus."""
def __init__(self):
super().__init__()
self.previous_cwd = expanduser("~")
gsettings_source = Gio.SettingsSchemaSource.get_default()
if gsettings_source.lookup(GSETTINGS_PATH, True):
self._gsettings = Gio.Settings.new(GSETTINGS_PATH)
self._setup_keybindings()
def get_background_items(self, current_folder: FileManager.FileInfo):
"""Update current URI when folder changes."""
if current_folder:
if current_folder.get_uri_scheme() in REMOTE_URI_SCHEME:
folder_path = current_folder.get_uri()
else:
folder_path = current_folder.get_location().get_path()
if folder_path and folder_path != self.previous_cwd:
self.previous_cwd = folder_path
return []
def _open_terminal(self, *_args):
"""Open the terminal at the specified URI."""
if self._gsettings.get_boolean(GSETTINGS_BIND_REMOTE):
open_remote_terminal_in_uri(self.previous_cwd)
else:
open_local_terminal_in_uri(self.previous_cwd)
def _setup_keybindings(self):
"""Set up custom keybindings for the extension."""
self.app = Gtk.Application.get_default()
if self.app is None:
print("No Gtk.Application found. Keybindings cannot be set.")
return
action = Gio.SimpleAction.new("open_any_terminal", None)
action.connect("activate", self._open_terminal)
self.app.add_action(action)
self._bind_shortcut()
self._gsettings.connect("changed", self._update_shortcut)
def _update_shortcut(self, _gsettings, key):
"""remove keybinding"""
if key == GSETTINGS_KEYBINDINGS:
self.app.set_accels_for_action("app.open_any_terminal", [])
self._bind_shortcut()
def _bind_shortcut(self):
"""Parse and update keybindings when settings change."""
shortcut = self._gsettings.get_string(GSETTINGS_KEYBINDINGS)
if not shortcut:
self.app.set_accels_for_action("app.open_any_terminal", [])
return
valid, key, mods = Gtk.accelerator_parse(shortcut)
if not valid:
print("Invalid shortcut in GSettings: %r", shortcut)
self.app.set_accels_for_action("app.open_any_terminal", [])
return
normalized = Gtk.accelerator_name(key, mods)
self.app.set_accels_for_action("app.open_any_terminal", [normalized])
elif API_VERSION in ("3.0", "2.0"):
class OpenAnyTerminalShortcutProviderLegacy(GObject.GObject, FileManager.LocationWidgetProvider):
"""Provide keyboard shortcuts for opening terminals in Nautilus/Caja."""
def __init__(self):
super().__init__()
gsettings_source = Gio.SettingsSchemaSource.get_default()
if gsettings_source.lookup(GSETTINGS_PATH, True):
self._gsettings = Gio.Settings.new(GSETTINGS_PATH)
self._gsettings.connect("changed", self._bind_shortcut)
self._create_accel_group()
self._window = None
self._uri = None
def _create_accel_group(self):
self._accel_group = Gtk.AccelGroup()
shortcut = self._gsettings.get_string(GSETTINGS_KEYBINDINGS)
key, mod = Gtk.accelerator_parse(shortcut)
self._accel_group.connect(key, mod, Gtk.AccelFlags.VISIBLE, self._open_terminal)
def _bind_shortcut(self, _gsettings, key):
if key == GSETTINGS_KEYBINDINGS:
self._accel_group.disconnect(self._open_terminal)
self._create_accel_group()
def _open_terminal(self, *_args):
if _gsettings.get_boolean(GSETTINGS_BIND_REMOTE):
open_local_terminal_in_uri(self._uri)
else:
open_remote_terminal_in_uri(self._uri)
def get_widget(self, uri, window):
"""follows uri and sets the correct window"""
self._uri = uri
if self._window:
self._window.remove_accel_group(self._accel_group)
if self._gsettings:
window.add_accel_group(self._accel_group)
self._window = window
class OpenAnyTerminalExtension(GObject.GObject, FileManager.MenuProvider):
"""Provide context menu items for opening terminals in Nautilus."""
def __init__(self):
super().__init__()
gsettings_source = Gio.SettingsSchemaSource.get_default()
if gsettings_source.lookup(GSETTINGS_PATH, True):
self._gsettings = Gio.Settings.new(GSETTINGS_PATH)
def _get_terminal_name(self):
if self._gsettings.get_boolean(GSETTINGS_USE_GENERIC_TERMINAL_NAME):
return _("Terminal")
return None
def _menu_dir_activate_cb(self, menu, file_, remote: bool):
if remote:
open_remote_terminal_in_uri(file_.get_uri())
else:
if file_.get_uri_scheme() == "smb":
file_uri = "file://" + quote(file_.get_location().get_path())
else:
file_uri = file_.get_uri()
open_local_terminal_in_uri(file_uri)
def _menu_exe_activate_cb(self, menu, file_, remote: bool):
if remote:
cmd = ssh_command_from_uri(file_.get_uri(), is_directory=False)
else:
result = urlparse(file_.get_uri())
file = unquote(result.path)
if result.scheme == "admin":
cmd = ["sudo", file]
elif terminal in ["xterm", "uxterm"]:
cmd = [f"exec {shlex.quote(file)}"]
else:
cmd = [file]
run_command_in_terminal(cmd)
def get_file_items(self, *args):
"""Generates a list of menu items for a file or folder in the Nautilus file manager."""
# `args` will be `[files: List[Nautilus.FileInfo]]` in Nautilus 4.0 API,
# and `[window: Gtk.Widget, files: List[Nautilus.FileInfo]]` in Nautilus 3.0 API.
files = args[-1]
if len(files) != 1:
return []
file_ = files[0]
if file_.is_directory():
return get_directory_menu_items(
file_, self._menu_dir_activate_cb, foreground=True, terminal_name=self._get_terminal_name()
)
if is_executable(file_.get_location()):
return get_executable_menu_items(file_, self._menu_exe_activate_cb, terminal_name=self._get_terminal_name())
return []
def get_background_items(self, *args):
"""Generates a list of background menu items for a file or folder in the Nautilus file manager."""
# `args` will be `[folder: Nautilus.FileInfo]` in Nautilus 4.0 API,
# and `[window: Gtk.Widget, file: Nautilus.FileInfo]` in Nautilus 3.0 API.
file_ = args[-1]
return get_directory_menu_items(
file_, self._menu_dir_activate_cb, foreground=False, terminal_name=self._get_terminal_name()
)
source = Gio.SettingsSchemaSource.get_default()
if source is not None and source.lookup(GSETTINGS_PATH, True):
_gsettings = Gio.Settings.new(GSETTINGS_PATH)
_gsettings.connect("changed", set_terminal_args)
set_terminal_args()
config/dot/btop/themes/tokyonight-day.theme
+1 -1
View File
@@ -2,7 +2,7 @@
# #
# btop ships no Tokyo Night light variant at all, and the nearest stock light # btop ships no Tokyo Night light variant at all, and the nearest stock light
# theme (flat-remix-light) is a different palette that happens to have a similar # theme (flat-remix-light) is a different palette that happens to have a similar
# background. Same colours as kitty/themes/tokyonight-day.conf so the terminal # background. Same colors as kitty/themes/tokyonight-day.conf so the terminal
# and what runs inside it cannot disagree. # and what runs inside it cannot disagree.
# #
# Gradients keep the same low -> middle -> high meaning as the dark theme, using # Gradients keep the same low -> middle -> high meaning as the dark theme, using
config/dot/forge/config/.windows.json.~260c6b69
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/.windows.json.~318f7cf9
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/.windows.json.~38323208
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/.windows.json.~42767d6d
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/.windows.json.~63ed4469
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/.windows.json.~68bf2ae6
-72
View File
@@ -1,72 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "Emulator",
"mode": "float"
}
]
}
config/dot/forge/config/windows.json
-76
View File
@@ -1,76 +0,0 @@
{
"overrides": [
{
"wmClass": "jetbrains-toolbox",
"mode": "float"
},
{
"wmClass": "Com.github.amezin.ddterm",
"mode": "float"
},
{
"wmClass": "Com.github.donadigo.eddy",
"mode": "float"
},
{
"wmClass": "Conky",
"mode": "float"
},
{
"wmClass": "Gnome-initial-setup",
"mode": "float"
},
{
"wmClass": "org.gnome.Calculator",
"mode": "float"
},
{
"wmClass": "gnome-terminal-preferences",
"mode": "float"
},
{
"wmClass": "Guake",
"mode": "float"
},
{
"wmClass": "zoom",
"mode": "float"
},
{
"wmClass": "Bitwarden",
"mode": "float"
},
{
"wmClass": "Hidamari",
"mode": "float"
},
{
"wmClass": "com.mattjakeman.ExtensionManager",
"mode": "float"
},
{
"wmClass": "Cider",
"mode": "float"
},
{
"wmClass": "Ulauncher",
"mode": "float"
},
{
"wmClass": "com.nextcloud.desktopclient.nextcloud",
"mode": "float"
},
{
"wmClass": "mpv",
"mode": "float"
},
{
"wmClass": "Spotify",
"mode": "float"
},
{
"wmClass": "bitwarden",
"mode": "float"
}
]
}
config/dot/forge/stylesheet/forge/stylesheet.css
-190
View File
@@ -1,190 +0,0 @@
.tiled {
color: rgba(236, 94, 94, 1);
opacity: 1;
border-width: 3px;
}
.split {
color: rgba(255, 246, 108, 1);
opacity: 1;
border-width: 3px;
}
.stacked {
color: rgba(247, 162, 43, 1);
opacity: 1;
border-width: 3px;
}
.tabbed {
color: rgba(17, 199, 224, 1);
opacity: 1;
border-width: 3px;
}
.floated {
color: rgba(180, 167, 214, 1);
border-width: 3px;
opacity: 1;
}
.window-tiled-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-split-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
/* forge-36le: St does not paint an asymmetric (single-side) border when a
* border-radius is set, so the directional hint never rendered. Drop the radius
* on the one-edge variants; St paints a straight single-side border reliably. */
.window-split-horizontal {
border-left-width: 0;
border-top-width: 0;
border-bottom-width: 0;
border-radius: 0;
}
.window-split-vertical {
border-left-width: 0;
border-top-width: 0;
border-right-width: 0;
border-radius: 0;
}
.window-stacked-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tabbed-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tabbed-bg {
border-radius: 8px;
}
.window-tabbed-tab {
background-color: rgba(54, 47, 45, 1);
border-color: rgba(98,160,234,0.6);
border-width: 1px;
border-radius: 8px;
color: white;
margin: 1px;
box-shadow: 0 0 0 1px rgba(0, 0, 0, 0.2);
}
.window-tabbed-tab-active {
background-color: rgb(98,160,234);
color: black;
box-shadow: 0 0 0 1px rgba(0, 0, 0, 0.2);
}
.window-tabbed-tab-close {
padding: 3px;
margin: 4px;
border-radius: 16px;
width: 16px;
background-color: #e06666;
}
.window-tabbed-tab-icon {
margin: 3px;
}
.window-floated-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tilepreview-tiled {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
.window-tilepreview-stacked {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
.window-tilepreview-swap {
border-width: 1px;
border-color: rgba(162, 247, 43, 0.4);
border-style: solid;
border-radius: 14px;
background-color: rgba(162, 247, 43, 0.4);
}
.window-tilepreview-tabbed {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
/* Keybindings Cheatsheet Overlay */
.forge-cheatsheet {
background-color: #2d2d2d;
border-radius: 16px;
padding: 24px 32px;
border: 1px solid #4d4d4d;
box-shadow: 0 4px 16px rgba(0, 0, 0, 0.4);
}
.forge-cheatsheet-title {
font-size: 16px;
font-weight: bold;
color: #ffffff;
margin-bottom: 20px;
text-align: center;
}
.forge-cheatsheet-category {
font-size: 13px;
font-weight: bold;
color: #78aeed;
margin-top: 16px;
margin-bottom: 8px;
}
.forge-cheatsheet-row {
font-size: 12px;
color: #eeeeec;
margin: 4px 0;
padding: 2px 0;
}
.forge-cheatsheet-key {
font-family: monospace;
font-weight: bold;
color: #f5c211;
min-width: 180px;
}
.forge-cheatsheet-desc {
color: #d0cfcc;
}
config/dot/forge/stylesheet/forge/stylesheet.css.bak
-190
View File
@@ -1,190 +0,0 @@
.tiled {
color: rgba(236, 94, 94, 1);
opacity: 1;
border-width: 3px;
}
.split {
color: rgba(255, 246, 108, 1);
opacity: 1;
border-width: 3px;
}
.stacked {
color: rgba(247, 162, 43, 1);
opacity: 1;
border-width: 3px;
}
.tabbed {
color: rgba(17, 199, 224, 1);
opacity: 1;
border-width: 3px;
}
.floated {
color: rgba(180, 167, 214, 1);
border-width: 3px;
opacity: 1;
}
.window-tiled-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-split-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
/* forge-36le: St does not paint an asymmetric (single-side) border when a
* border-radius is set, so the directional hint never rendered. Drop the radius
* on the one-edge variants; St paints a straight single-side border reliably. */
.window-split-horizontal {
border-left-width: 0;
border-top-width: 0;
border-bottom-width: 0;
border-radius: 0;
}
.window-split-vertical {
border-left-width: 0;
border-top-width: 0;
border-right-width: 0;
border-radius: 0;
}
.window-stacked-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tabbed-border {
border-width: 3px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tabbed-bg {
border-radius: 8px;
}
.window-tabbed-tab {
background-color: rgba(54, 47, 45, 1);
border-color: rgba(98,160,234,0.6);
border-width: 1px;
border-radius: 8px;
color: white;
margin: 1px;
box-shadow: 0 0 0 1px rgba(0, 0, 0, 0.2);
}
.window-tabbed-tab-active {
background-color: rgb(98,160,234);
color: black;
box-shadow: 0 0 0 1px rgba(0, 0, 0, 0.2);
}
.window-tabbed-tab-close {
padding: 3px;
margin: 4px;
border-radius: 16px;
width: 16px;
background-color: #e06666;
}
.window-tabbed-tab-icon {
margin: 3px;
}
.window-floated-border {
border-width: 1px;
border-color: rgb(98,160,234);
border-style: solid;
border-radius: 14px;
}
.window-tilepreview-tiled {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
.window-tilepreview-stacked {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
.window-tilepreview-swap {
border-width: 1px;
border-color: rgba(162, 247, 43, 0.4);
border-style: solid;
border-radius: 14px;
background-color: rgba(162, 247, 43, 0.4);
}
.window-tilepreview-tabbed {
border-width: 1px;
border-color: rgba(98,160,234,0.3);
border-style: solid;
border-radius: 14px;
background-color: rgba(98,160,234,0.2);
}
/* Keybindings Cheatsheet Overlay */
.forge-cheatsheet {
background-color: #2d2d2d;
border-radius: 16px;
padding: 24px 32px;
border: 1px solid #4d4d4d;
box-shadow: 0 4px 16px rgba(0, 0, 0, 0.4);
}
.forge-cheatsheet-title {
font-size: 16px;
font-weight: bold;
color: #ffffff;
margin-bottom: 20px;
text-align: center;
}
.forge-cheatsheet-category {
font-size: 13px;
font-weight: bold;
color: #78aeed;
margin-top: 16px;
margin-bottom: 8px;
}
.forge-cheatsheet-row {
font-size: 12px;
color: #eeeeec;
margin: 4px 0;
padding: 2px 0;
}
.forge-cheatsheet-key {
font-family: monospace;
font-weight: bold;
color: #f5c211;
min-width: 180px;
}
.forge-cheatsheet-desc {
color: #d0cfcc;
}
config/dot/gtk-3.0/settings.ini.template
+1 -1
View File
@@ -1,6 +1,6 @@
# GENERATED FILE -- edit settings.ini.template instead. # GENERATED FILE -- edit settings.ini.template instead.
# #
# The theme name and dark preference below follow Panama's colour # The theme name and dark preference below follow Panama's color
# scheme, so this file is regenerated on every switch and is not # scheme, so this file is regenerated on every switch and is not
# committed. Under GNOME, gnome-settings-daemon publishes these over # committed. Under GNOME, gnome-settings-daemon publishes these over
# XSETTINGS and this file is ignored; under Hyprland there is no # XSETTINGS and this file is ignored; under Hyprland there is no
config/dot/gtk-4.0/settings.ini.template
+1 -1
View File
@@ -1,6 +1,6 @@
# GENERATED FILE -- edit settings.ini.template instead. # GENERATED FILE -- edit settings.ini.template instead.
# #
# The theme name and dark preference below follow Panama's colour # The theme name and dark preference below follow Panama's color
# scheme, so this file is regenerated on every switch and is not # scheme, so this file is regenerated on every switch and is not
# committed. Under GNOME, gnome-settings-daemon publishes these over # committed. Under GNOME, gnome-settings-daemon publishes these over
# XSETTINGS and this file is ignored; under Hyprland there is no # XSETTINGS and this file is ignored; under Hyprland there is no
config/dot/hypr/DESKTOP-PARITY.md
+10 -10
View File
@@ -15,15 +15,15 @@ Last live audit: 2026-08-17, Fedora 44, Hyprland 0.56.2, Quickshell 0.3.0.
| Hidden applications | GNOME App Hider list in Vicinae provider config | Live | | Hidden applications | GNOME App Hider list in Vicinae provider config | Live |
| Tiling and dynamic workspaces | Hyprland Lua config, Forge keymap preserved | Live | | Tiling and dynamic workspaces | Hyprland Lua config, Forge keymap preserved | Live |
| Overview | Continuum filmstrip, large workspace preview, cross-workspace search | Live | | Overview | Continuum filmstrip, large workspace preview, cross-workspace search | Live |
| Minimise | `SUPER+SHIFT+X` sends to scratchpad; `SUPER+X` restores | Live | | Minimize | `SUPER+SHIFT+X` sends to scratchpad; `SUPER+X` restores | Live |
| Dock | Quickshell dock with GNOME favourites and intellihide | Live | | Dock | Quickshell dock with GNOME favorites and intellihide | Live |
| Panel | Workspaces, CPU/RAM/GPU, clock, weather, quiet event capsule, media, clipboard, tray, status | Live | | Panel | Workspaces, CPU/RAM/GPU, clock, weather, quiet event capsule, media, clipboard, tray, status | Live |
| Clipboard history | Vicinae owns capture/storage; Quickshell provides the panel | Live | | Clipboard history | Vicinae owns capture/storage; Quickshell provides the panel | Live |
| Notifications | Quickshell server, toasts, grouped history, DND, clear actions | Live | | Notifications | Quickshell server, toasts, grouped history, DND, clear actions | Live |
| Date menu | Two-column Daybook with Agenda, Ongoing activity, Notifications, month calendar, weather, and media | Live | | Date menu | Two-column Daybook with Agenda, Ongoing activity, Notifications, month calendar, weather, and media | Live |
| Ongoing activity | Focus, Caffeine, recording, screen sharing, camera, and microphone state with direct controls | Live | | Ongoing activity | Focus, Caffeine, recording, screen sharing, camera, and microphone state with direct controls | Live |
| Calendar agenda | Existing GNOME, Google, iCloud, and Nextcloud sources through Evolution Data Server | Live | | Calendar agenda | Existing GNOME, Google, iCloud, and Nextcloud sources through Evolution Data Server | Live |
| Control Center | Wi-Fi, Bluetooth, audio input/output, Caffeine, Night Light, Focus, Home Assistant favourites, and KDE Connect phone continuity | Live | | Control Center | Wi-Fi, Bluetooth, audio input/output, Caffeine, Night Light, Focus, Home Assistant favorites, and KDE Connect phone continuity | Live |
| Focus sessions | Persistent workspace-bound timer, DND/caffeine coordination, Signal Glass controls | Live | | Focus sessions | Persistent workspace-bound timer, DND/caffeine coordination, Signal Glass controls | Live |
| Brightness | Appears only when a backlight device exists | Live, not applicable on this monitor | | Brightness | Appears only when a backlight device exists | Live, not applicable on this monitor |
| AppIndicator / tray | Native StatusNotifierItem host and themed menus | Live | | AppIndicator / tray | Native StatusNotifierItem host and themed menus | Live |
@@ -36,14 +36,14 @@ Last live audit: 2026-08-17, Fedora 44, Hyprland 0.56.2, Quickshell 0.3.0.
| Removable media | udiskie plus udisks notifications | Live | | Removable media | udiskie plus udisks notifications | Live |
| Autostart apps | Nextcloud, Bitwarden, and RustDesk system service/tray | Live | | Autostart apps | Nextcloud, Bitwarden, and RustDesk system service/tray | Live |
| Printer administration | CUPS with the `system-config-printer` graphical interface | Live | | Printer administration | CUPS with the `system-config-printer` graphical interface | Live |
| System settings | The Settings app for display policy, appearance, desktop, sound, focus, shortcuts, and services; labelled GNOME hardware/account handoffs | Live | | System settings | The Settings app for display policy, appearance, desktop, sound, focus, shortcuts, and services; labeled GNOME hardware/account handoffs | Live |
| System health and recovery | Settings → System Health, `Panama: Check System Health` in Vicinae, a degraded-only bar indicator, redacted reports, and bounded Panama-owned repairs | Live | | System health and recovery | Settings → System Health, `Check System Health` in Vicinae, a degraded-only bar indicator, redacted reports, and bounded Panama-owned repairs | Live |
## System health and recovery ## System health and recovery
Panama stays silent while the desktop is healthy. A compact bar indicator Panama stays silent while the desktop is healthy. A compact bar indicator
appears only for actionable warnings or errors and opens the same **System appears only for actionable warnings or errors and opens the same **System
Health** page available from Settings and the Vicinae command **Panama: Check Health** page available from Settings and the Vicinae command **Check
System Health**. The terminal summary is available with: System Health**. The terminal summary is available with:
```bash ```bash
@@ -59,7 +59,7 @@ They never install packages, invoke `sudo`, delete user data, or rewrite
arbitrary configuration. arbitrary configuration.
Generic Fedora configuration remains with the system tools that own it. The Generic Fedora configuration remains with the system tools that own it. The
final System Health card hands network settings, users, sharing, colour final System Health card hands network settings, users, sharing, color
profiles, and digital wellbeing to their exact GNOME Settings panels rather profiles, and digital wellbeing to their exact GNOME Settings panels rather
than presenting inert Hyprland controls. than presenting inert Hyprland controls.
@@ -77,9 +77,9 @@ than presenting inert Hyprland controls.
| Caffeine | Replaced by a real logind inhibitor in quick settings | | Caffeine | Replaced by a real logind inhibitor in quick settings |
| Blur My Shell / Openbar / User Theme | Replaced by the Prism shell and compositor blur | | Blur My Shell / Openbar / User Theme | Replaced by the Prism shell and compositor blur |
| Bluetooth Quick Connect | Replaced by the full Bluetooth picker | | Bluetooth Quick Connect | Replaced by the full Bluetooth picker |
| Wi-Fi QR | Deliberately omitted; it is not useful enough to justify another credential-reading surface | | Wi-Fi QR | Replaced by an on-demand QR-code sharing flow in Control Center's Wi-Fi panel; the code is generated only while shown and written to tmpfs, never persisted |
| GSConnect | Replaced by capability-aware KDE Connect phone continuity in Control Center; the paired iPhone exposes file, clipboard, and Ring actions when reachable | | GSConnect | Replaced by capability-aware KDE Connect phone continuity in Control Center; the paired iPhone exposes file, clipboard, and Ring actions when reachable |
| Home Assistant | Replaced by secure favourites in Control Center; explicit private environment values take precedence over the existing GNOME extension and Secret Service setup | | Home Assistant | Replaced by secure favorites in Control Center; explicit private environment values take precedence over the existing GNOME extension and Secret Service setup |
| Custom Hot Corners Extended | No action was configured, so there is no behavior to port | | Custom Hot Corners Extended | No action was configured, so there is no behavior to port |
| App Hider | Hidden app list is now applied in Vicinae | | App Hider | Hidden app list is now applied in Vicinae |
| Allow Locked Remote Desktop | Mutter-specific patch; RustDesk is independent, but lock-screen access needs a real remote test | | Allow Locked Remote Desktop | Mutter-specific patch; RustDesk is independent, but lock-screen access needs a real remote test |
@@ -111,4 +111,4 @@ menu for a minority, which is worse than omitting it. Relevant references:
- <https://github.com/hyprwm/Hyprland/discussions/1358> - <https://github.com/hyprwm/Hyprland/discussions/1358>
A future focused-window menu could expose compositor actions such as float, A future focused-window menu could expose compositor actions such as float,
move, fullscreen, and close. It should not be labelled as an application menu. move, fullscreen, and close. It should not be labeled as an application menu.
config/dot/hypr/README.md
+16 -16
View File
@@ -30,7 +30,7 @@ Don't "fix" them.
| `prefs.lua` | Reads the settings file the Settings app writes. See below | | `prefs.lua` | Reads the settings file the Settings app writes. See below |
| `env.lua` | Environment. Note the uwsm caveat below | | `env.lua` | Environment. Note the uwsm caveat below |
| `monitors.lua` | DP-2 geometry, scaling, and the HDR decision | | `monitors.lua` | DP-2 geometry, scaling, and the HDR decision |
| `looks.lua` | Colours, blur, glow, shadows, animations, VRR, scanout | | `looks.lua` | Colors, blur, glow, shadows, animations, VRR, scanout |
| `input.lua` | Keyboard/mouse. Click-to-focus, like GNOME | | `input.lua` | Keyboard/mouse. Click-to-focus, like GNOME |
| `rules.lua` | Window rules, gaming rules, layer rules for the shell | | `rules.lua` | Window rules, gaming rules, layer rules for the shell |
| `keybinds.lua` | The full keymap | | `keybinds.lua` | The full keymap |
@@ -87,8 +87,8 @@ persistence, validation, reset, and the live write are all derived from that
entry. entry.
`prefs.lua` never raises. A missing, empty, truncated, malformed, or `prefs.lua` never raises. A missing, empty, truncated, malformed, or
wrong-typed settings file costs you your customisations and nothing else; wrong-typed settings file costs you your customizations and nothing else;
`tests/hypr/prefs-fallback-contract.sh` pins that, including that Hyprland still `tests/hypr/prefs-fallback-contract` pins that, including that Hyprland still
accepts the config in each of those states. accepts the config in each of those states.
### Adding a keybind: use `bind`, not `hl.bind` ### Adding a keybind: use `bind`, not `hl.bind`
@@ -120,7 +120,7 @@ Every `hl.bind` must pass a `description`. Hyprland reports Lua-defined binds
with dispatcher `__lua` and a bytecode offset as the argument, so a bind without with dispatcher `__lua` and a bytecode offset as the argument, so a bind without
one has nothing readable beside its chord, and the Settings app drops it from the one has nothing readable beside its chord, and the Settings app drops it from the
Input & Shortcuts page rather than showing a mystery row. Input & Shortcuts page rather than showing a mystery row.
`tests/quickshell/keybinds-contract.sh` fails if any bind lacks a description, so `tests/quickshell/keybinds-contract` fails if any bind lacks a description, so
this cannot regress silently. this cannot regress silently.
```lua ```lua
@@ -163,7 +163,7 @@ four places, and nowhere else —
dock, popovers), running blue on the left to orchid on the right and fading dock, popovers), running blue on the left to orchid on the right and fading
out before the corners. See `quickshell/widgets/PrismEdge.qml`. out before the corners. See `quickshell/widgets/PrismEdge.qml`.
2. The focused window's border — `general.col.active_border`, blue→orchid at 2. The focused window's border — `general.col.active_border`, blue→orchid at
115°. Unfocused windows get no colour at all, because the gradient only 115°. Unfocused windows get no color at all, because the gradient only
means something if one window on screen is wearing it. means something if one window on screen is wearing it.
3. The active workspace pill in the bar. 3. The active workspace pill in the bar.
4. Slider fills. 4. Slider fills.
@@ -179,9 +179,9 @@ which is the opposite of the intent.
The Nerd Font is still used, but only to draw **icon glyphs** — it is the The Nerd Font is still used, but only to draw **icon glyphs** — it is the
pragmatic alternative to freedesktop symbolic icons, which ship with a pragmatic alternative to freedesktop symbolic icons, which ship with a
hardcoded `#2e3436` fill that Qt (unlike GTK) will not recolour. Where a hardcoded `#2e3436` fill that Qt (unlike GTK) will not recolor. Where a
themed freedesktop icon is wanted instead, `quickshell/widgets/ThemedIcon.qml` themed freedesktop icon is wanted instead, `quickshell/widgets/ThemedIcon.qml`
paints a palette colour through the icon's alpha. paints a palette color through the icon's alpha.
Anything whose digits change in place — the clock, the vitals percentages, the Anything whose digits change in place — the clock, the vitals percentages, the
recording timer, the selection readout — sets `font.features: recording timer, the selection readout — sets `font.features:
@@ -247,7 +247,7 @@ The mental model is unchanged from Forge:
| `SUPER + SHIFT + H/J/K/L` | Move window | | `SUPER + SHIFT + H/J/K/L` | Move window |
| `SUPER + CTRL + H/J/K/L` | Swap window | | `SUPER + CTRL + H/J/K/L` | Swap window |
| `SUPER + SHIFT + Y/O` · `B/M` | Wider · narrower | | `SUPER + SHIFT + Y/O` · `B/M` | Wider · narrower |
| `SUPER + SHIFT + I/U` · `P/N` | Taller · shorter | | `SUPER + SHIFT + I/U` · `,/N` | Taller · shorter |
| `SUPER + [` / `]` / `=` | Shrink / expand / reset split | | `SUPER + [` / `]` / `=` | Shrink / expand / reset split |
| `SUPER + Q` | Close | | `SUPER + Q` | Close |
| `SUPER + U` | Fullscreen | | `SUPER + U` | Fullscreen |
@@ -256,7 +256,7 @@ The mental model is unchanged from Forge:
| `SUPER + CTRL + G` / `Z` / `V` | Toggle split / preselect right / preselect down | | `SUPER + CTRL + G` / `Z` / `V` | Toggle split / preselect right / preselect down |
| `SUPER + Tab` / `SHIFT + Tab` | Cycle windows | | `SUPER + Tab` / `SHIFT + Tab` | Cycle windows |
| `SUPER + SHIFT + grave` | Last window | | `SUPER + SHIFT + grave` | Last window |
| `SUPER + X` / `SUPER + SHIFT + X` | Restore scratchpad / minimise to scratchpad | | `SUPER + X` / `SUPER + SHIFT + X` | Restore scratchpad / minimize to scratchpad |
### Workspaces (dynamic, like GNOME) ### Workspaces (dynamic, like GNOME)
| Key | Action | | Key | Action |
@@ -270,19 +270,19 @@ The mental model is unchanged from Forge:
### Launcher and shell ### Launcher and shell
| Key | Action | | Key | Action |
|---|---| |---|---|
| `SUPER + A` / `R` / `Space` | Launcher (vicinae) — all three, pick your favourite | | `SUPER + A` / `R` / `Space` | Launcher (vicinae) — all three, pick your favorite |
| `SUPER + SHIFT + R` | Fallback launcher (wofi) if the shell is broken | | `SUPER + SHIFT + R` | Fallback launcher (wofi) if the shell is broken |
| `SUPER + V` | Clipboard history | | `SUPER + V` | Clipboard history |
| `SUPER + .` | Emoji picker | | `SUPER + .` | Emoji picker |
| `SUPER + S` | Quick settings | | `SUPER + S` | Quick settings |
| `SUPER + I` | Settings | | `SUPER + I` | Settings |
| `SUPER + SHIFT + F` | Start or reveal focus session | | `SUPER + SHIFT + F` | Start or reveal focus session |
| `SUPER + B` | Notification centre | | `SUPER + B` | Notification center |
| `SUPER + grave` | Workspace overview | | `SUPER + grave` | Workspace overview |
| `Print` | Screenshot / record picker | | `Print` | Screenshot / record picker |
| `SHIFT` / `ALT + Print` | Screenshot screen / window immediately | | `SHIFT` / `ALT + Print` | Screenshot screen / window immediately |
| `SUPER + SHIFT + S` | Screen Intelligence — read text and codes from a selection | | `SUPER + SHIFT + S` | Screen Intelligence — read text and codes from a selection |
| `SUPER + SHIFT + P` | Colour picker | | `SUPER + SHIFT + P` | Color picker |
| `CTRL + ALT + L` | Lock (SUPER+L is "focus right") | | `CTRL + ALT + L` | Lock (SUPER+L is "focus right") |
| `CTRL + ALT + Delete` | Power menu | | `CTRL + ALT + Delete` | Power menu |
@@ -325,8 +325,8 @@ Caffeine, Night Light, Focus, audio input/output, user, settings, and power in
one place. Home and Phone continue the same surface rather than opening extra one place. Home and Phone continue the same surface rather than opening extra
dashboard windows. dashboard windows.
Home shows the first four selected favourites at rest and every selected light Home shows the first four selected favorites at rest and every selected light
when expanded. Use **Settings → Home & Phone** to choose favourites, when expanded. Use **Settings → Home & Phone** to choose favorites,
set Panama-only aliases, and arrange their order. Dragging a brightness control set Panama-only aliases, and arrange their order. Dragging a brightness control
only previews the value; releasing it sends one brightness request. A normal only previews the value; releasing it sends one brightness request. A normal
power toggle leaves Home Assistant responsible for restoring its previous power toggle leaves Home Assistant responsible for restoring its previous
@@ -334,7 +334,7 @@ level.
Credentials stay private in the gitignored `config/bash/env` file, with the Credentials stay private in the gitignored `config/bash/env` file, with the
existing GNOME extension and Secret Service setup retained as a compatibility existing GNOME extension and Secret Service setup retained as a compatibility
fallback. Favourites, aliases, and order live in Quickshell state. No shell fallback. Favorites, aliases, and order live in Quickshell state. No shell
restart is required after changing credentials; close and reopen Control Center restart is required after changing credentials; close and reopen Control Center
to refresh. If Home Assistant is offline, the last known values stay visible to refresh. If Home Assistant is offline, the last known values stay visible
with a stale-state label and Retry action. with a stale-state label and Retry action.
@@ -361,7 +361,7 @@ These are the places a 1:1 port was impossible, and what was done instead:
- **Per-edge resize.** Forge resized one named edge; Hyprland resizes along an - **Per-edge resize.** Forge resized one named edge; Hyprland resizes along an
axis and lets the layout pick the edge. The eight Forge keys collapse to four axis and lets the layout pick the edge. The eight Forge keys collapse to four
behaviours, keeping the horizontal/vertical and grow/shrink pairing. behaviors, keeping the horizontal/vertical and grow/shrink pairing.
- **Overview on `SUPER + grave`, not a bare SUPER tap.** Tap-detection on a - **Overview on `SUPER + grave`, not a bare SUPER tap.** Tap-detection on a
modifier misfires when you're quick with SUPER combos. modifier misfires when you're quick with SUPER combos.
- **Lock on `CTRL + ALT + L`.** `SUPER + L` is "focus right" in this keymap. - **Lock on `CTRL + ALT + L`.** `SUPER + L` is "focus right" in this keymap.
config/dot/hypr/autostart.lua
+30 -13
View File
@@ -23,8 +23,21 @@ hl.on("hyprland.start", function()
hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=Hyprland") hl.exec_cmd("dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP=Hyprland")
hl.exec_cmd("systemctl --user start hyprland-session.target") hl.exec_cmd("systemctl --user start hyprland-session.target")
-- Units: polkit prompts, wallpaper, launcher daemon, idle/lock. -- Units: polkit prompts, wallpaper, launcher daemon, idle/lock. All four
hl.exec_cmd("systemctl --user start hyprpolkitagent.service hyprpaper.service vicinae.service hypridle.service") -- carry `ConditionEnvironment=WAYLAND_DISPLAY`, and hl.exec_cmd fires
-- commands without waiting for them to finish, so the dbus-update call
-- above racing this one is not safe to assume complete -- a lost race
-- leaves the Condition unmet and the unit silently never starts (exit 0,
-- no error). hypridle is the only listener for the logind Lock signal,
-- so that failure mode is "lock-session goes to nobody". Re-import
-- synchronously in the same shell invocation first so the Condition
-- always sees it, regardless of how the dbus-update call above scheduled.
-- panama-polkit-agent replaces hyprpolkitagent, whose prompt is compiled
-- into its binary and cannot be themed. Only one agent may register per
-- session, so they must not both start. hyprpolkitagent stays INSTALLED as
-- the fallback: `systemctl --user start hyprpolkitagent` restores the stock
-- prompt if Panama's ever fails to come up.
hl.exec_cmd("systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP && systemctl --user start panama-polkit-agent.service hyprpaper.service vicinae.service hypridle.service")
-- The shell: bar, dock, overview, quick settings, notifications, capture. -- The shell: bar, dock, overview, quick settings, notifications, capture.
-- No systemd unit ships with quickshell, so it runs as a compositor child. -- No systemd unit ships with quickshell, so it runs as a compositor child.
@@ -39,18 +52,22 @@ hl.on("hyprland.start", function()
-- Keyring unlock, for Nextcloud and Bitwarden credential storage. -- Keyring unlock, for Nextcloud and Bitwarden credential storage.
hl.exec_cmd("/usr/bin/gnome-keyring-daemon --start --components=secrets,ssh,pkcs11") hl.exec_cmd("/usr/bin/gnome-keyring-daemon --start --components=secrets,ssh,pkcs11")
-- Tray applications carried over from ~/.config/autostart. These need the -- Nextcloud and Bitwarden are NOT started here. Both ship a
-- Quickshell tray (an SNI host) to be up, hence starting after it. -- ~/.config/autostart/*.desktop entry, and systemd's own
-- systemd-xdg-autostart-generator turns every such entry into a
-- `PartOf=graphical-session.target` unit (`[email protected]`,
-- `[email protected]`) that fires once the uwsm
-- session brings up graphical-session.target -- confirmed live via
-- `systemctl --user list-units 'app-*@autostart.service'`. An explicit
-- second launch here used to duplicate that: for Bitwarden specifically,
-- each `flatpak run` gets its own sandbox instance, so the two starts
-- didn't just race, they left two competing processes fighting over the
-- app's single-instance lock, with neither reliably owning a usable
-- window. Trust the generator instead of re-launching.
-- --
-- Commands are copied verbatim from the GNOME .desktop files rather than -- RustDesk is deliberately absent too: it ships an enabled *system*
-- guessed: Bitwarden is a flatpak with no `bitwarden` binary on PATH, and -- service (`rustdesk --service`) that spawns --server and --tray for the
-- its autostart entry launches a specific script with --autostart. -- session on its own. Starting it here as well would give you two trays.
--
-- RustDesk is deliberately absent: it ships an enabled *system* service
-- (`rustdesk --service`) that spawns --server and --tray for the session on
-- its own. Starting it here as well would give you two trays.
hl.exec_cmd("nextcloud --background")
hl.exec_cmd("flatpak run --command=bitwarden.sh com.bitwarden.desktop --autostart")
end) end)
hl.on("hyprland.shutdown", function() hl.on("hyprland.shutdown", function()
config/dot/hypr/env.lua
+2 -2
View File
@@ -1,7 +1,7 @@
-- ───────────────────────────────────────────────────────────────────────────── -- ─────────────────────────────────────────────────────────────────────────────
-- Environment -- Environment
-- --
-- hl.env() sets variables before the display server initialises, which is what -- hl.env() sets variables before the display server initializes, which is what
-- makes it valid for AQ_* and cursor variables. -- makes it valid for AQ_* and cursor variables.
-- --
-- NOTE for uwsm sessions: if you log in via "Hyprland (uwsm-managed)", uwsm -- NOTE for uwsm sessions: if you log in via "Hyprland (uwsm-managed)", uwsm
@@ -58,7 +58,7 @@ hl.env("QT_QPA_PLATFORM", "wayland;xcb")
-- "gtk3" makes Qt derive its palette from the live GTK3 theme via the qgtk3 -- "gtk3" makes Qt derive its palette from the live GTK3 theme via the qgtk3
-- platform plugin, so Qt apps match adw-gtk3-dark exactly rather than -- platform plugin, so Qt apps match adw-gtk3-dark exactly rather than
-- approximating it -- and it gives them GTK file/font/colour dialogs. It also -- approximating it -- and it gives them GTK file/font/color dialogs. It also
-- covers Qt5 and Qt6 with one value. -- covers Qt5 and Qt6 with one value.
-- --
-- Note this is a single value, NOT a fallback list: Qt splits on ":" and uses -- Note this is a single value, NOT a fallback list: Qt splits on ":" and uses
config/dot/hypr/hypridle.conf
+1 -1
View File
@@ -1,5 +1,5 @@
# ───────────────────────────────────────────────────────────────────────────── # ─────────────────────────────────────────────────────────────────────────────
# hypridle — idle behaviour # hypridle — idle behavior
# #
# Mirrors the GNOME power profile this replaces, exactly: # Mirrors the GNOME power profile this replaces, exactly:
# org.gnome.desktop.session idle-delay = 300 (screen off at 5min) # org.gnome.desktop.session idle-delay = 300 (screen off at 5min)
config/dot/hypr/hyprland.lua
+1 -1
View File
@@ -15,7 +15,7 @@
-- ───────────────────────────────────────────────────────────────────────────── -- ─────────────────────────────────────────────────────────────────────────────
-- Shared preferences first: looks/input/monitors read their defaults through it. -- Shared preferences first: looks/input/monitors read their defaults through it.
-- It never raises, so a missing or malformed settings file costs customisations -- It never raises, so a missing or malformed settings file costs customizations
-- and nothing else. -- and nothing else.
require("prefs") require("prefs")
config/dot/hypr/hyprlock.conf.template
+2 -2
View File
@@ -3,9 +3,9 @@
# #
# GENERATED FILE. Edit hyprlock.conf.template and re-run # GENERATED FILE. Edit hyprlock.conf.template and re-run
# quickshell/scripts/panama-theme-apps; editing this copy is overwritten on the # quickshell/scripts/panama-theme-apps; editing this copy is overwritten on the
# next colour scheme change. # next color scheme change.
# #
# The colours here follow the desktop's light/dark setting. They used to be # The colors here follow the desktop's light/dark setting. They used to be
# hardcoded Tokyo Night Moon, which meant the one screen you see most often # hardcoded Tokyo Night Moon, which meant the one screen you see most often
# stayed dark when everything else went light. # stayed dark when everything else went light.
# #
config/dot/hypr/hyprtoolkit.conf
+1 -1
View File
@@ -9,7 +9,7 @@
# hyprland-guiutils hyprland-dialog / hyprland-run # hyprland-guiutils hyprland-dialog / hyprland-run
# hyprpolkitagent authentication prompts (via hyprland-qt-support) # hyprpolkitagent authentication prompts (via hyprland-qt-support)
# #
# Colours are Tokyo Night Moon, matching quickshell/config/Theme.qml and # Colors are Tokyo Night Moon, matching quickshell/config/Theme.qml and
# hypr/looks.lua. Format is hyprlang; path is fixed at # hypr/looks.lua. Format is hyprlang; path is fixed at
# $XDG_CONFIG_HOME/hypr/hyprtoolkit.conf (confirmed in libhyprtoolkit). # $XDG_CONFIG_HOME/hypr/hyprtoolkit.conf (confirmed in libhyprtoolkit).
# ───────────────────────────────────────────────────────────────────────────── # ─────────────────────────────────────────────────────────────────────────────
config/dot/hypr/input.lua
+25 -4
View File
@@ -22,10 +22,10 @@ hl.config({
repeat_rate = prefs.get("keyRepeatRate", 33), repeat_rate = prefs.get("keyRepeatRate", 33),
-- 1 = FOLLOW. The window under the pointer takes focus. This comment -- 1 = FOLLOW. The window under the pointer takes focus. This comment
-- previously claimed 1 was "click to focus, GNOME's behaviour", which -- previously claimed 1 was "click to focus, GNOME's behavior", which
-- is the opposite of what Hyprland does -- `hyprctl descriptions` gives -- is the opposite of what Hyprland does -- `hyprctl descriptions` gives
-- map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}], -- map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}],
-- so click-to-focus is 0. Changing the shipped value is a behaviour -- so click-to-focus is 0. Changing the shipped value is a behavior
-- decision rather than a correction, so the value is left alone and -- decision rather than a correction, so the value is left alone and
-- only the description is fixed; Settings exposes all four. -- only the description is fixed; Settings exposes all four.
follow_mouse = prefs.getInt("followMouse", 1), follow_mouse = prefs.getInt("followMouse", 1),
@@ -44,7 +44,28 @@ hl.config({
}, },
}) })
-- Desktop machine: no touchpad, no gestures worth wiring. If a laptop ever -- ── Touchpad gestures ───────────────────────────────────────────────────────
-- runs this config, add touchpad settings in overrides.lua. --
-- GNOME's gestures, reproduced: three fingers sideways moves between
-- workspaces, three fingers up opens the overview, three fingers down closes
-- it. That is the same muscle memory the keybinds were built to preserve.
--
-- Registered unconditionally rather than behind a preference. Hyprland 0.56
-- dropped `gestures:workspace_swipe` in favour of this `gesture` keyword, and a
-- registration is read at config time -- so a toggle would need a reload to
-- take effect, which is worse than the nothing these cost on a machine with no
-- touchpad. What IS tunable at runtime lives in Settings: how far a swipe has
-- to travel, and which way round it goes.
--
-- open and close rather than toggle twice: with a toggle on both directions,
-- swiping up from an already-open overview would close it, and swiping down
-- would reopen it. GNOME does not do that, and neither does this.
local overview = function(fn)
return function() hl.exec_cmd("qs ipc call overview " .. fn) end
end
hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })
hl.gesture({ fingers = 3, direction = "up", action = overview("open") })
hl.gesture({ fingers = 3, direction = "down", action = overview("close") })
return true return true
config/dot/hypr/keybinds.lua
+66 -21
View File
@@ -34,6 +34,10 @@ local osd = function(action)
return "$HOME/.config/quickshell/scripts/panama-osd " .. action return "$HOME/.config/quickshell/scripts/panama-osd " .. action
end end
local dictate = function(action)
return "$HOME/.config/quickshell/scripts/panama-dictate " .. action
end
-- Quickshell IPC targets. See quickshell/shell.qml for the handlers. -- Quickshell IPC targets. See quickshell/shell.qml for the handlers.
local qs = function(target, fn) return "qs ipc call " .. target .. " " .. fn end local qs = function(target, fn) return "qs ipc call " .. target .. " " .. fn end
@@ -118,7 +122,7 @@ bind(mod .. " + SHIFT + F", hl.dsp.exec_cmd(qs("focus", "reveal")), { descriptio
-- which Hyprland has no equivalent for. -- which Hyprland has no equivalent for.
bind(mod .. " + grave", hl.dsp.exec_cmd(qs("overview", "toggle")), { description = "Overview" }) bind(mod .. " + grave", hl.dsp.exec_cmd(qs("overview", "toggle")), { description = "Overview" })
-- Notification centre. -- Notification center.
bind(mod .. " + B", hl.dsp.exec_cmd(qs("notifications", "toggle")), { description = "Notifications" }) bind(mod .. " + B", hl.dsp.exec_cmd(qs("notifications", "toggle")), { description = "Notifications" })
-- Screenshot / screen record. One key, then pick screen / window / region and -- Screenshot / screen record. One key, then pick screen / window / region and
@@ -133,8 +137,8 @@ bind("ALT + Print", hl.dsp.exec_cmd(qs("capture", "windowNow")), { description =
bind(mod .. " + SHIFT + S", hl.dsp.exec_cmd(qs("screen-intelligence", "open")), bind(mod .. " + SHIFT + S", hl.dsp.exec_cmd(qs("screen-intelligence", "open")),
{ description = "Screen Intelligence" }) { description = "Screen Intelligence" })
-- Colour picker: copies the hex under the cursor to the clipboard. -- Color picker: copies the hex under the cursor to the clipboard.
bind(mod .. " + SHIFT + P", hl.dsp.exec_cmd("hyprpicker -a -f hex"), { description = "Colour picker" }) bind(mod .. " + SHIFT + P", hl.dsp.exec_cmd("hyprpicker -a -f hex"), { description = "Color picker" })
-- ── Window management ─────────────────────────────────────────────────────── -- ── Window management ───────────────────────────────────────────────────────
bind(mod .. " + Q", hl.dsp.window.close(), { description = "Close window" }) bind(mod .. " + Q", hl.dsp.window.close(), { description = "Close window" })
@@ -180,20 +184,30 @@ bind(mod .. " + CTRL + L", hl.dsp.window.swap({ direction = "r" }), { descriptio
-- Resize (Forge: window-resize-<edge>-<increase|decrease>). -- Resize (Forge: window-resize-<edge>-<increase|decrease>).
-- --
-- Forge resized one named edge at a time. Hyprland resizes the active window -- Forge resized one named EDGE at a time: its resize() grows the window for a
-- along an axis and lets the layout decide which edge actually moves, so the -- positive amount in every direction, and the edge only decides which side
-- eight Forge keys collapse onto four behaviours. The pairing is kept -- moves -- Y grew leftward, O grew rightward, and so on. Hyprland resizes along
-- consistent with the original: Y/B/O/M are horizontal, I/P/U/N are vertical, -- an axis and lets the layout choose the border, so those eight distinct
-- and "increase" always grows while "decrease" always shrinks. -- behaviours collapse onto four and the direction is simply not expressible.
--
-- Because of that the sizes are deliberately INVERTED from Forge's naming.
-- Carried over faithfully, "increase" grew and "decrease" shrank, which was
-- correct on paper and wrong under the fingers: with the edge gone, the keys
-- that used to pull a window open from one side now push it from the other.
-- Gabriel uses these daily and reads Y/O as shrink and B/M as grow, so that is
-- what they do. Faithfulness to a mapping nobody can feel is not worth much.
local step = 60 local step = 60
bind(mod .. " + SHIFT + Y", hl.dsp.window.resize({ x = step, y = 0, relative = true }), { repeating = true, description = "Wider" }) bind(mod .. " + SHIFT + Y", hl.dsp.window.resize({ x = -step, y = 0, relative = true }), { repeating = true, description = "Narrower" })
bind(mod .. " + SHIFT + O", hl.dsp.window.resize({ x = step, y = 0, relative = true }), { repeating = true, description = "Wider" }) bind(mod .. " + SHIFT + O", hl.dsp.window.resize({ x = -step, y = 0, relative = true }), { repeating = true, description = "Narrower" })
bind(mod .. " + SHIFT + B", hl.dsp.window.resize({ x = -step, y = 0, relative = true }), { repeating = true, description = "Narrower" }) bind(mod .. " + SHIFT + B", hl.dsp.window.resize({ x = step, y = 0, relative = true }), { repeating = true, description = "Wider" })
bind(mod .. " + SHIFT + M", hl.dsp.window.resize({ x = -step, y = 0, relative = true }), { repeating = true, description = "Narrower" }) bind(mod .. " + SHIFT + M", hl.dsp.window.resize({ x = step, y = 0, relative = true }), { repeating = true, description = "Wider" })
bind(mod .. " + SHIFT + I", hl.dsp.window.resize({ x = 0, y = step, relative = true }), { repeating = true, description = "Taller" }) bind(mod .. " + SHIFT + I", hl.dsp.window.resize({ x = 0, y = -step, relative = true }), { repeating = true, description = "Shorter" })
bind(mod .. " + SHIFT + U", hl.dsp.window.resize({ x = 0, y = step, relative = true }), { repeating = true, description = "Taller" }) bind(mod .. " + SHIFT + U", hl.dsp.window.resize({ x = 0, y = -step, relative = true }), { repeating = true, description = "Shorter" })
bind(mod .. " + SHIFT + P", hl.dsp.window.resize({ x = 0, y = -step, relative = true }), { repeating = true, description = "Shorter" }) -- SUPER+SHIFT+P was double-bound with the color picker above; moved to
bind(mod .. " + SHIFT + N", hl.dsp.window.resize({ x = 0, y = -step, relative = true }), { repeating = true, description = "Shorter" }) -- Comma, which continues the bottom-row cluster (B/M/N) this axis already
-- uses rather than landing on an arbitrary free key.
bind(mod .. " + SHIFT + Comma", hl.dsp.window.resize({ x = 0, y = step, relative = true }), { repeating = true, description = "Taller" })
bind(mod .. " + SHIFT + N", hl.dsp.window.resize({ x = 0, y = step, relative = true }), { repeating = true, description = "Taller" })
-- Window cycling (GNOME: cycle-windows on SUPER+Tab), now with an overlay -- Window cycling (GNOME: cycle-windows on SUPER+Tab), now with an overlay
-- showing what you are choosing between. -- showing what you are choosing between.
@@ -223,6 +237,17 @@ bind(mod .. " + mouse:273", hl.dsp.window.resize(), { mouse = true, description
-- Plain relative selectors ("+1" / "-1") reproduce GNOME's dynamic workspaces: -- Plain relative selectors ("+1" / "-1") reproduce GNOME's dynamic workspaces:
-- moving right past the last workspace creates a new one, and moving left from -- moving right past the last workspace creates a new one, and moving left from
-- the first clamps instead of wrapping. -- the first clamps instead of wrapping.
-- Behavior for the relative/cyclic binds below. These are Hyprland's own
-- `binds:` options -- not part of general/dwindle -- and have no other home
-- in the config, so they are read here rather than in looks.lua.
hl.config({
binds = {
workspace_back_and_forth = prefs.get("workspaceBackAndForth", false),
allow_workspace_cycles = prefs.get("allowWorkspaceCycles", false),
},
})
bind("ALT + H", hl.dsp.focus({ workspace = "-1" }), { description = "Workspace left" }) bind("ALT + H", hl.dsp.focus({ workspace = "-1" }), { description = "Workspace left" })
bind("ALT + L", hl.dsp.focus({ workspace = "+1" }), { description = "Workspace right" }) bind("ALT + L", hl.dsp.focus({ workspace = "+1" }), { description = "Workspace right" })
bind("ALT + SHIFT + H", hl.dsp.window.move({ workspace = "-1" }), { description = "Move window to workspace left" }) bind("ALT + SHIFT + H", hl.dsp.window.move({ workspace = "-1" }), { description = "Move window to workspace left" })
@@ -245,18 +270,18 @@ end
bind(mod .. " + mouse_down", hl.dsp.focus({ workspace = "+1" }), { description = "Workspace right" }) bind(mod .. " + mouse_down", hl.dsp.focus({ workspace = "+1" }), { description = "Workspace right" })
bind(mod .. " + mouse_up", hl.dsp.focus({ workspace = "-1" }), { description = "Workspace left" }) bind(mod .. " + mouse_up", hl.dsp.focus({ workspace = "-1" }), { description = "Workspace left" })
-- Minimise, as far as Hyprland has one. -- Minimize, as far as Hyprland has one.
-- --
-- Hyprland has no minimise: it receives the request (the binary has -- Hyprland has no minimize: it receives the request (the binary has
-- setSetMinimized handlers for xdg, XWayland and foreign-toplevel) but exposes -- setSetMinimized handlers for xdg, XWayland and foreign-toplevel) but exposes
-- no dispatcher, no config option and not even an event to hook, so titlebar -- no dispatcher, no config option and not even an event to hook, so titlebar
-- minimise buttons are inert and cannot be made to work. A tiling WM has no -- minimize buttons are inert and cannot be made to work. A tiling WM has no
-- iconified state and no taskbar to restore from. -- iconified state and no taskbar to restore from.
-- --
-- The scratchpad is the honest equivalent: the window goes away, and the same -- The scratchpad is the honest equivalent: the window goes away, and the same
-- key brings it back. Bound to X to match the muscle memory it replaces. -- key brings it back. Bound to X to match the muscle memory it replaces.
bind(mod .. " + X", hl.dsp.workspace.toggle_special("scratch"), { description = "Toggle scratchpad (restore minimised)" }) bind(mod .. " + X", hl.dsp.workspace.toggle_special("scratch"), { description = "Toggle scratchpad (restore minimized)" })
bind(mod .. " + SHIFT + X", hl.dsp.window.move({ workspace = "special:scratch" }), { description = "Minimise to scratchpad" }) bind(mod .. " + SHIFT + X", hl.dsp.window.move({ workspace = "special:scratch" }), { description = "Minimize to scratchpad" })
-- ── Session ───────────────────────────────────────────────────────────────── -- ── Session ─────────────────────────────────────────────────────────────────
-- GNOME's lock was SUPER+L, which is "focus right" here, so lock moves to -- GNOME's lock was SUPER+L, which is "focus right" here, so lock moves to
@@ -272,6 +297,26 @@ bind("XF86AudioLowerVolume", hl.dsp.exec_cmd(osd("volume down 6")), { locked = t
bind("XF86AudioMute", hl.dsp.exec_cmd(osd("volume toggle")), { locked = true , description = "Mute" }) bind("XF86AudioMute", hl.dsp.exec_cmd(osd("volume toggle")), { locked = true , description = "Mute" })
bind("XF86AudioMicMute", hl.dsp.exec_cmd(osd("microphone toggle")), { locked = true , description = "Mute microphone" }) bind("XF86AudioMicMute", hl.dsp.exec_cmd(osd("microphone toggle")), { locked = true , description = "Mute microphone" })
-- ── Dictation ───────────────────────────────────────────────────────────────
--
-- Hold to talk, exactly like push-to-talk anywhere else: the mic is open only
-- while the key is down, so it cannot be left listening by forgetting about it.
-- Two binds on one chord, the second flagged `release`.
--
-- No `repeating`: holding a key normally repeats the press, which would restart
-- the recording several times a second. The daemon refuses a second start while
-- one is running, so a repeat would be harmless -- but not asking for it is
-- better than relying on being refused.
bind(mod .. " + D", hl.dsp.exec_cmd(dictate("start")),
{ description = "Dictate (hold to talk)" })
bind(mod .. " + D", hl.dsp.exec_cmd(dictate("stop")),
{ release = true, description = "Dictate (transcribe on release)" })
-- Escape out of a recording without transcribing it. Bound to the same modifier
-- so it can be reached with the dictation key still held.
bind(mod .. " + SHIFT + D", hl.dsp.exec_cmd(dictate("cancel")),
{ description = "Cancel dictation" })
-- Fine-grained steps, matching GNOME's shift/alt volume modifiers. -- Fine-grained steps, matching GNOME's shift/alt volume modifiers.
bind("SHIFT + XF86AudioRaiseVolume", hl.dsp.exec_cmd(osd("volume up 1")), { locked = true, repeating = true , description = "Volume up (fine)" }) bind("SHIFT + XF86AudioRaiseVolume", hl.dsp.exec_cmd(osd("volume up 1")), { locked = true, repeating = true , description = "Volume up (fine)" })
bind("SHIFT + XF86AudioLowerVolume", hl.dsp.exec_cmd(osd("volume down 1")), { locked = true, repeating = true , description = "Volume down (fine)" }) bind("SHIFT + XF86AudioLowerVolume", hl.dsp.exec_cmd(osd("volume down 1")), { locked = true, repeating = true , description = "Volume down (fine)" })
config/dot/hypr/looks.lua
+51 -11
View File
@@ -1,8 +1,8 @@
-- ───────────────────────────────────────────────────────────────────────────── -- ─────────────────────────────────────────────────────────────────────────────
-- Look and feel -- Tokyo Night Moon -- Look and feel -- Tokyo Night Moon
-- --
-- Colours here must stay in sync with quickshell/config/Theme.qml. -- Colors here must stay in sync with quickshell/config/Theme.qml.
-- accent #82aaff borders / focus -- accent user-selectable, see `accents` below -- blue (#82aaff) ships
-- bg #222436 base -- bg #222436 base
-- --
-- Performance note: every animation below is event-driven. Nothing uses the -- Performance note: every animation below is event-driven. Nothing uses the
@@ -14,6 +14,30 @@
local prefs = require("prefs") local prefs = require("prefs")
-- Mirrors config/Theme.qml's `accents` map. Lua has no import path into a QML
-- singleton, so the hex pairs are restated here -- just the four hex strings
-- each named accent needs, not the labels, which stay UI-only.
local accents = {
blue = { dark = "82aaff", darkSecondary = "b172b0", light = "2e7de9", lightSecondary = "9854f1" },
orchid = { dark = "c099ff", darkSecondary = "fca7ea", light = "7847bd", lightSecondary = "9854f1" },
teal = { dark = "86e1fc", darkSecondary = "82aaff", light = "007197", lightSecondary = "2e7de9" },
green = { dark = "c3e88d", darkSecondary = "86e1fc", light = "587539", lightSecondary = "007197" },
amber = { dark = "ffc777", darkSecondary = "ff966c", light = "8c6c3e", lightSecondary = "b15c00" },
orange = { dark = "ff966c", darkSecondary = "ff757f", light = "b15c00", lightSecondary = "c64343" },
rose = { dark = "ff757f", darkSecondary = "c099ff", light = "f52a65", lightSecondary = "9854f1" },
slate = { dark = "828bb8", darkSecondary = "82aaff", light = "6172b0", lightSecondary = "2e7de9" },
}
-- The accent pair a fresh session or `hyprctl reload` starts from.
-- services/ColorScheme.qml overwrites this live, from the same Theme.accents
-- data, once the shell settles (~1.2s after startup -- see its `settle`
-- Timer). This table exists only so the compositor is never observably blue
-- for a non-blue accent during the gap before that first live apply.
local accentScheme = prefs.get("colorScheme", "dark")
local accentPair = accents[prefs.get("accentName", "blue")] or accents.blue
local accentStart = accentScheme == "light" and accentPair.light or accentPair.dark
local accentEnd = accentScheme == "light" and accentPair.lightSecondary or accentPair.darkSecondary
hl.config({ hl.config({
general = { general = {
gaps_in = prefs.get("gapsIn", 5), gaps_in = prefs.get("gapsIn", 5),
@@ -22,12 +46,14 @@ hl.config({
border_size = prefs.get("borderSize", 2), border_size = prefs.get("borderSize", 2),
col = { col = {
-- The focused accent role: blue leads, orchid follows, on a -- The focused accent role, on a diagonal so the pair is visible
-- diagonal so the pair is visible on both a tall and a wide -- on both a tall and a wide window. Driven by the chosen
-- window. ColorScheme never writes this role; a future accent -- accentName (see the `accents` table above); services/
-- picker can own it without fighting light/dark mode. -- ColorScheme.qml applies the same values live, and restates them
active_border = { colors = { "rgba(82aaffee)", "rgba(b172b0ee)" }, angle = 115 }, -- from Theme.accent/Theme.accentSecondary on every scheme change
-- The neutral inactive role follows the colour scheme because a -- too, since each accent carries a separate pair per scheme.
active_border = { colors = { "rgba(" .. accentStart .. "ee)", "rgba(" .. accentEnd .. "ee)" }, angle = 115 },
-- The neutral inactive role follows the color scheme because a
-- dark neutral disappears against a light desktop. -- dark neutral disappears against a light desktop.
-- services/ColorScheme.qml applies the same values live; this is -- services/ColorScheme.qml applies the same values live; this is
-- the value a fresh session starts from. -- the value a fresh session starts from.
@@ -104,11 +130,13 @@ hl.config({
-- New in 0.56. Kept deliberately faint: in this direction the gradient -- New in 0.56. Kept deliberately faint: in this direction the gradient
-- border is the signature, and a strong halo would compete with it. -- border is the signature, and a strong halo would compete with it.
-- This is just enough to lift the focused window off the wallpaper. -- This is just enough to lift the focused window off the wallpaper.
-- Derived from the same accent as active_border above, not hardcoded,
-- so the halo never disagrees with the border it surrounds.
glow = { glow = {
enabled = prefs.get("glowEnabled", true), enabled = prefs.get("glowEnabled", true),
range = prefs.get("glowRange", 8), range = prefs.get("glowRange", 8),
render_power = 2, render_power = 2,
color = "rgba(82aaff33)", color = "rgba(" .. accentStart .. "33)",
color_inactive = "rgba(00000000)", color_inactive = "rgba(00000000)",
}, },
@@ -165,12 +193,24 @@ hl.config({
-- Let a crashed lock screen be recovered rather than stranding you. -- Let a crashed lock screen be recovered rather than stranding you.
allow_session_lock_restore = true, allow_session_lock_restore = true,
-- Don't let apps steal focus by shouting; matches GNOME's behaviour. -- Don't let apps steal focus by shouting; matches GNOME's behavior.
focus_on_activate = false, focus_on_activate = false,
-- Window swallowing: a terminal hides itself while a graphical
-- application launched from it is open, and comes back when that
-- application exits. Off by default -- it is a real change in how the
-- desktop behaves, and one that is confusing rather than broken if you
-- did not ask for it: your terminal appears to vanish.
--
-- The regex is narrow on purpose. Anything matching it can swallow, so
-- a permissive pattern means windows disappearing in cases nobody
-- intended. Only the two terminals this desktop actually ships.
enable_swallow = prefs.get("windowSwallow", false),
swallow_regex = "^(kitty|com\\.mitchellh\\.ghostty)$",
}, },
render = { render = {
-- Colour management is stable and on by default in 0.56. -- Color management is stable and on by default in 0.56.
cm_enabled = true, cm_enabled = true,
-- 1 = automatically flip the monitor into HDR for fullscreen content -- 1 = automatically flip the monitor into HDR for fullscreen content
config/dot/hypr/monitors.lua
+38 -2
View File
@@ -25,7 +25,7 @@ local prefs = require("prefs")
-- x = 0, y = 0, primary = true, -- x = 0, y = 0, primary = true,
-- } } -- } }
-- --
-- Only mode, scale, and transform are read. Colour management and bit depth -- Only mode, scale, and transform are read. Color management and bit depth
-- stay here, because those are the settings with a documented reason attached -- stay here, because those are the settings with a documented reason attached
-- (see the header) rather than preferences, and a settings page has no way to -- (see the header) rather than preferences, and a settings page has no way to
-- explain the screencopy tradeoff at the moment you would be changing it. -- explain the screencopy tradeoff at the moment you would be changing it.
@@ -147,7 +147,7 @@ hl.monitor({
}) })
-- Other connected outputs use the same validated per-output store. They keep -- Other connected outputs use the same validated per-output store. They keep
-- automatic placement and the compositor's normal colour policy; DP-2 alone -- automatic placement and the compositor's normal color policy; DP-2 alone
-- carries the panel-specific 10-bit policy documented above. -- carries the panel-specific 10-bit policy documented above.
for output, _ in pairs(displays) do for output, _ in pairs(displays) do
if output ~= "DP-2" then if output ~= "DP-2" then
@@ -172,4 +172,40 @@ hl.monitor({
scale = "auto", scale = "auto",
}) })
-- ── Workspaces on the primary display only ──────────────────────────────────
--
-- GNOME offered one workspace choice worth reproducing: whether the other
-- screens join in. Off, every monitor has its own workspaces and switching
-- affects whichever one has focus -- Hyprland's own behaviour, so it needs no
-- rules at all. On, workspaces 1-10 are pinned to the primary display and a
-- second screen keeps a workspace of its own that stays put.
--
-- Ten because that is how many the keybinds reach: ALT+1 through ALT+0 in
-- keybinds.lua. Binding more would pin workspaces nothing can navigate to, and
-- binding fewer would leave the last few behaving differently from the rest for
-- no reason a person could see.
--
-- The rules are emitted here rather than written live because Hyprland reads
-- them at config time and offers no way to remove one afterwards: writing an
-- empty monitor leaves the previous binding in place. So the config is the only
-- honest source, and applying a change is a reload.
if prefs.get("workspacesOnPrimaryOnly", false) == true then
local primary = nil
for output, entry in pairs(displays) do
if type(entry) == "table" and entry.primary == true
and type(output) == "string" and output:match("^[%w_.-]+$") ~= nil then
primary = output
break
end
end
-- Without a primary there is nothing to pin to, and guessing one would move
-- every workspace onto whichever screen happened to sort first.
if primary ~= nil then
for i = 1, 10 do
hl.workspace_rule({ workspace = tostring(i), monitor = primary })
end
end
end
return true return true
config/dot/hypr/prefs.lua
+1 -1
View File
@@ -16,7 +16,7 @@
-- cannot drift apart. -- cannot drift apart.
-- --
-- Nothing here may raise. A missing, empty, truncated, or actively malformed -- Nothing here may raise. A missing, empty, truncated, or actively malformed
-- file must cost the user nothing worse than their customisations; it must -- file must cost the user nothing worse than their customizations; it must
-- never cost them a working compositor. Every failure path returns the caller's -- never cost them a working compositor. Every failure path returns the caller's
-- fallback. -- fallback.
-- ───────────────────────────────────────────────────────────────────────────── -- ─────────────────────────────────────────────────────────────────────────────
config/dot/hypr/rules.lua
+14 -2
View File
@@ -69,7 +69,7 @@ hl.window_rule({
float = true, float = true,
}) })
-- Settings-style utility windows and pickers: float and centre, like GNOME did. -- Settings-style utility windows and pickers: float and center, like GNOME did.
hl.window_rule({ hl.window_rule({
match = { class = "^(pavucontrol|org\\.pulseaudio\\.pavucontrol|nm-connection-editor|blueman-manager|org\\.gnome\\.Settings)$" }, match = { class = "^(pavucontrol|org\\.pulseaudio\\.pavucontrol|nm-connection-editor|blueman-manager|org\\.gnome\\.Settings)$" },
float = true, float = true,
@@ -77,6 +77,18 @@ hl.window_rule({
center = true, center = true,
}) })
-- Quick Look. The GNOME previewer is what the file manager opens on space,
-- and it is an overlay rather than a window someone manages: tiled, it shoves
-- the file manager aside and has to be dismissed before the list is usable
-- again. Sized generously because a preview that needs zooming is not a
-- preview; it still gets a margin so the file underneath stays visible.
hl.window_rule({
match = { class = "^org\\.gnome\\.NautilusPreviewer$" },
float = true,
size = { "monitor_w * 0.7", "monitor_h * 0.8" },
center = true,
})
-- Portal dialogs (file chooser, screen share picker) should always float. -- Portal dialogs (file chooser, screen share picker) should always float.
hl.window_rule({ hl.window_rule({
match = { class = "^(xdg-desktop-portal-gtk|org\\.freedesktop\\.impl\\.portal\\.desktop\\.gtk|hyprland-share-picker)$" }, match = { class = "^(xdg-desktop-portal-gtk|org\\.freedesktop\\.impl\\.portal\\.desktop\\.gtk|hyprland-share-picker)$" },
@@ -150,7 +162,7 @@ hl.layer_rule({
ignore_alpha = 0.3, ignore_alpha = 0.3,
}) })
-- Popovers: calendar, quick settings, notification centre, tray menus. -- Popovers: calendar, quick settings, notification center, tray menus.
hl.layer_rule({ hl.layer_rule({
name = "qs-popover", name = "qs-popover",
match = { namespace = "^qs-popover" }, match = { namespace = "^qs-popover" },
config/dot/kitty/themes/tokyonight-moon.conf
+1 -1
View File
@@ -1,7 +1,7 @@
# Tokyo Night Moon — the dark theme Panama ships. # Tokyo Night Moon — the dark theme Panama ships.
# #
# Extracted from kitty.conf so the two schemes can be swapped. kitty.conf # Extracted from kitty.conf so the two schemes can be swapped. kitty.conf
# includes current-theme.conf, which Panama generates from the colour scheme # includes current-theme.conf, which Panama generates from the color scheme
# setting; that generated file is gitignored because it is machine state. # setting; that generated file is gitignored because it is machine state.
# #
# Live changes go through `kitty @ set-colors`, which is why kitty.conf enables # Live changes go through `kitty @ set-colors`, which is why kitty.conf enables
config/dot/nvim/lua/config/panama.lua
+1 -1
View File
@@ -6,7 +6,7 @@
-- Hyprland config read. -- Hyprland config read.
-- --
-- Nothing here may raise. A missing or malformed settings file must cost the -- Nothing here may raise. A missing or malformed settings file must cost the
-- user their colour scheme preference and nothing else; editing text is more -- user their color scheme preference and nothing else; editing text is more
-- important than matching the desktop. -- important than matching the desktop.
local M = {} local M = {}
config/dot/nvim/lua/plugins/colorscheme.lua
+3 -3
View File
@@ -1,12 +1,12 @@
-- Tokyo Night, following the desktop's colour scheme. -- Tokyo Night, following the desktop's color scheme.
-- --
-- Moon when Panama is dark, Day when it is light. Same theme family either way, -- Moon when Panama is dark, Day when it is light. Same theme family either way,
-- so the editor keeps the identity the rest of the desktop has rather than -- so the editor keeps the identity the rest of the desktop has rather than
-- becoming a different-looking application when the scheme flips. -- becoming a different-looking application when the scheme flips.
-- --
-- The readability fixes below are deliberately dark-only. They were written -- The readability fixes below are deliberately dark-only. They were written
-- against Moon's palette -- a pale comment colour, a mid-grey gutter -- and -- against Moon's palette -- a pale comment color, a mid-gray gutter -- and
-- applying them to Day would put light grey text on a light background, which -- applying them to Day would put light gray text on a light background, which
-- is exactly the legibility problem they exist to solve, inverted. -- is exactly the legibility problem they exist to solve, inverted.
local panama = require("config.panama") local panama = require("config.panama")
config/dot/ohmyposh/zen.toml
+1 -1
View File
@@ -22,7 +22,7 @@ console_title_template = '{{ .Shell }} in {{ .Folder }}'
[[blocks.segments]] [[blocks.segments]]
type = 'git' type = 'git'
style = 'plain' style = 'plain'
foreground = 'p:grey' foreground = 'p:gray'
background = 'transparent' background = 'transparent'
template = ' {{ .HEAD }}{{ if or (.Working.Changed) (.Staging.Changed) }}*{{ end }} <cyan>{{ if gt .Behind 0 }}⇣{{ end }}{{ if gt .Ahead 0 }}⇡{{ end }}</>' template = ' {{ .HEAD }}{{ if or (.Working.Changed) (.Staging.Changed) }}*{{ end }} <cyan>{{ if gt .Behind 0 }}⇣{{ end }}{{ if gt .Ahead 0 }}⇡{{ end }}</>'
config/dot/quickshell/accent-controls-harness.qml
+41
View File
@@ -0,0 +1,41 @@
import Quickshell
import Quickshell.Io
import QtQuick
import qs.modules.settings
import qs.services
ShellRoot {
Item {
width: 680
height: editor.implicitHeight
AccentEditor {
id: editor
width: parent.width
}
ThemeProfilePicker {
width: parent.width
visible: false
}
AccentPicker {
width: parent.width
visible: false
}
}
IpcHandler {
target: "accent-controls-test"
function status(): string {
return JSON.stringify(ThemeProfiles.activeProfile);
}
function adjust(target: string, channel: string, ratio: real): string {
editor.changeChannel(target, channel, ratio);
return status();
}
}
}
config/dot/quickshell/config/DesktopPreferences.qml
+1 -1
View File
@@ -101,7 +101,7 @@ Singleton {
const raw = (parsed && typeof parsed === "object") ? parsed : {}; const raw = (parsed && typeof parsed === "object") ? parsed : {};
// Upgrade before anything reads a value. A stored key the current // Upgrade before anything reads a value. A stored key the current
// schema no longer recognises is carried through untouched and silently // schema no longer recognizes is carried through untouched and silently
// stops taking effect, so the conversion has to happen here rather than // stops taking effect, so the conversion has to happen here rather than
// being noticed later by whoever owns that setting. // being noticed later by whoever owns that setting.
const result = Migrations.apply(raw); const result = Migrations.apply(raw);
config/dot/quickshell/config/HomePreferences.qml
+1 -1
View File
@@ -19,7 +19,7 @@ Singleton {
printErrors: false printErrors: false
atomicWrites: true atomicWrites: true
onSaved: root.saveError = "" onSaved: root.saveError = ""
onSaveFailed: error => root.saveError = "Could not save Home favourites." onSaveFailed: error => root.saveError = "Could not save Home favorites."
JsonAdapter { JsonAdapter {
id: values id: values
config/dot/quickshell/config/Migrations.qml
+1 -1
View File
@@ -5,7 +5,7 @@ pragma Singleton
// The schema is the single source of truth for what a setting IS, but it cannot // The schema is the single source of truth for what a setting IS, but it cannot
// describe what a setting USED to be. Renaming a key, changing its units, or // describe what a setting USED to be. Renaming a key, changing its units, or
// splitting one setting into two all leave a stored value that the new schema // splitting one setting into two all leave a stored value that the new schema
// does not recognise -- and an unrecognised key is silently carried through // does not recognize -- and an unrecognized key is silently carried through
// untouched, so the user's choice simply stops taking effect with nothing to // untouched, so the user's choice simply stops taking effect with nothing to
// say why. That is the failure this exists to prevent. // say why. That is the failure this exists to prevent.
// //
config/dot/quickshell/config/PreferenceSchema.qml
+193 -27
View File
@@ -91,6 +91,32 @@ Singleton {
label: "Automatically hide the Dock", label: "Automatically hide the Dock",
detail: "Reveal it at the bottom edge when a workspace is occupied" detail: "Reveal it at the bottom edge when a workspace is occupied"
}, },
{
key: "dockPosition", type: "enum", def: "bottom", group: "dock",
label: "Position",
detail: "Which edge the Dock lives on",
options: [
{ value: "bottom", label: "Bottom" },
{ value: "left", label: "Left" },
{ value: "right", label: "Right" }
]
},
// A "json" value: the screen names the Dock appears on. Empty means
// every screen, which is both the sensible default and the right
// answer for the common single-monitor case -- storing a list of
// names there would go stale the moment a display is unplugged.
{
key: "dockScreens", type: "json", def: [], group: "dock",
label: "Screens",
detail: "Which displays show the Dock"
},
{
key: "dockIconSize", type: "int", def: 48, min: 32, max: 80, step: 4,
unit: "px", group: "dock",
label: "Icon size",
detail: "How large the Dock's application icons are drawn"
},
{ {
key: "dockRevealDelayMs", type: "int", def: 0, min: 0, max: 1000, step: 25, key: "dockRevealDelayMs", type: "int", def: 0, min: 0, max: 1000, step: 25,
unit: "ms", unit: "ms",
@@ -107,6 +133,41 @@ Singleton {
}, },
// ── Focus ─────────────────────────────────────────────────────────── // ── Focus ───────────────────────────────────────────────────────────
// ── Focus modes ─────────────────────────────────────────────────────
// A "json" value: named modes, each with what turns it on and what it
// does. Triggers rather than a scheduler -- a mode is on because a
// condition is true right now, which is re-evaluated rather than fired
// once. A schedule is one of those conditions ("is now inside this
// window?"), which is why suspend, a reboot mid-window, and a lid
// opened after the start time all behave correctly without special
// cases: there is no alarm to have missed.
//
// Gaming ships enabled because the behaviour already existed as
// gamingSilenceNotifications; Sleep ships disabled, because a desktop
// that starts silencing someone on first boot has overstepped.
{
key: "focusModes", type: "json", group: "focus",
label: "Focus modes",
detail: "What quiets this machine, and what turns it on",
def: [
{
id: "deep-work", name: "Deep work", enabled: true,
triggers: [{ kind: "manual" }],
durationMinutes: 45, silence: true, keepAwake: true, allow: []
},
{
id: "gaming", name: "Gaming", enabled: true,
triggers: [{ kind: "game" }],
durationMinutes: 0, silence: true, keepAwake: true, allow: []
},
{
id: "sleep", name: "Sleep", enabled: false,
triggers: [{ kind: "schedule", start: "23:30", end: "07:00",
days: [0, 1, 2, 3, 4, 5, 6] }],
durationMinutes: 0, silence: true, keepAwake: false, allow: []
}
]
},
{ {
key: "focusDurationMinutes", type: "int", def: 45, min: 5, max: 180, step: 5, key: "focusDurationMinutes", type: "int", def: 45, min: 5, max: 180, step: 5,
unit: "min", unit: "min",
@@ -119,6 +180,19 @@ Singleton {
// These three are written to the compositor and verified by read-back. // These three are written to the compositor and verified by read-back.
// See services/SystemSettings.qml for why the exit code cannot be // See services/SystemSettings.qml for why the exit code cannot be
// trusted for either hyprctl keyword or hyprctl eval. // trusted for either hyprctl keyword or hyprctl eval.
// GNOME's Multitasking panel had exactly this choice, and it is the one
// worth reproducing: not which workspace goes on which screen, but
// whether the second screen participates in workspaces at all.
//
// No `hypr` block, because this is not an option. It becomes workspace
// rules in monitors.lua, and Hyprland reads those at config time and
// will not let one be removed afterwards -- so applying a change is a
// reload rather than a write, which is what Workspaces.qml owns.
{
key: "workspacesOnPrimaryOnly", type: "bool", def: false, group: "display",
label: "Workspaces on the primary display only",
detail: "Other screens keep one workspace of their own rather than switching along with it"
},
{ {
key: "autoHdr", type: "bool", def: true, group: "display", key: "autoHdr", type: "bool", def: true, group: "display",
label: "Game-aware HDR", label: "Game-aware HDR",
@@ -171,7 +245,7 @@ Singleton {
unit: "px", unit: "px",
group: "windows", group: "windows",
label: "Inner gaps", label: "Inner gaps",
detail: "Space between neighbouring tiled windows", detail: "Space between neighboring tiled windows",
hypr: { path: ["general", "gaps_in"], option: "general:gaps_in", readAs: "css" } hypr: { path: ["general", "gaps_in"], option: "general:gaps_in", readAs: "css" }
}, },
{ {
@@ -278,7 +352,7 @@ Singleton {
// ── Master layout ─────────────────────────────────────────────────── // ── Master layout ───────────────────────────────────────────────────
// Only meaningful when the tiling layout is Master and stack. Offering // Only meaningful when the tiling layout is Master and stack. Offering
// that layout with none of its options was an omission: it is the one // that layout with none of its options was an omission: it is the one
// layout whose whole behaviour is in these settings. // layout whose whole behavior is in these settings.
{ {
key: "masterFactor", type: "real", def: 0.55, min: 0.1, max: 0.9, step: 0.05, key: "masterFactor", type: "real", def: 0.55, min: 0.1, max: 0.9, step: 0.05,
group: "master", group: "master",
@@ -295,7 +369,7 @@ Singleton {
{ value: "right", label: "Right" }, { value: "right", label: "Right" },
{ value: "top", label: "Top" }, { value: "top", label: "Top" },
{ value: "bottom", label: "Bottom" }, { value: "bottom", label: "Bottom" },
{ value: "center", label: "Centre" } { value: "center", label: "Center" }
], ],
hypr: { path: ["master", "orientation"], option: "master:orientation", readAs: "str" } hypr: { path: ["master", "orientation"], option: "master:orientation", readAs: "str" }
}, },
@@ -429,7 +503,7 @@ Singleton {
{ {
key: "keyboardVariant", type: "string", def: "", group: "input", key: "keyboardVariant", type: "string", def: "", group: "input",
// Same shape as the layout list and for the same reason: this is // Same shape as the layout list and for the same reason: this is
// serialised into an hl.config string. // serialized into an hl.config string.
pattern: "^$|^[a-z0-9_]{1,24}(,[a-z0-9_]{1,24})*$", pattern: "^$|^[a-z0-9_]{1,24}(,[a-z0-9_]{1,24})*$",
label: "Layout variant", label: "Layout variant",
detail: "XKB variant, such as dvorak or colemak. Empty for the standard layout", detail: "XKB variant, such as dvorak or colemak. Empty for the standard layout",
@@ -475,7 +549,7 @@ Singleton {
// The compositor publishes the authoritative mapping itself -- // The compositor publishes the authoritative mapping itself --
// `hyprctl descriptions` gives // `hyprctl descriptions` gives
// map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}] // map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}]
// -- so a desktop labelled "Click to focus" was in fact following // -- so a desktop labeled "Click to focus" was in fact following
// the pointer, and the way to actually get click-to-focus was to // the pointer, and the way to actually get click-to-focus was to
// choose "Never". Value 3 was missing entirely. // choose "Never". Value 3 was missing entirely.
// //
@@ -612,6 +686,24 @@ Singleton {
hypr: { path: ["input", "touchpad", "middle_button_emulation"], option: "input:touchpad:middle_button_emulation", readAs: "bool" } hypr: { path: ["input", "touchpad", "middle_button_emulation"], option: "input:touchpad:middle_button_emulation", readAs: "bool" }
}, },
// Tuning for the three-finger gestures registered in hypr/input.lua.
// The gestures themselves are not settings: Hyprland reads a gesture
// registration at config time, so switching one on would need a reload,
// and these two are the parts it will accept at runtime.
{
key: "swipeDistance", type: "int", def: 300, min: 100, max: 800, step: 20,
unit: "px", group: "touchpad",
label: "Swipe distance",
detail: "How far a three-finger swipe must travel to change workspace",
hypr: { path: ["gestures", "workspace_swipe_distance"], option: "gestures:workspace_swipe_distance", readAs: "int" }
},
{
key: "swipeInvert", type: "bool", def: true, group: "touchpad",
label: "Natural swipe direction",
detail: "Swiping left moves to the workspace on the right, as content follows your fingers",
hypr: { path: ["gestures", "workspace_swipe_invert"], option: "gestures:workspace_swipe_invert", readAs: "bool" }
},
// ── Multitasking ──────────────────────────────────────────────────── // ── Multitasking ────────────────────────────────────────────────────
// //
// GNOME's Multitasking panel, in Hyprland's terms. The Desktop page // GNOME's Multitasking panel, in Hyprland's terms. The Desktop page
@@ -673,6 +765,12 @@ Singleton {
detail: "An application asking for attention is switched to, rather than only highlighted", detail: "An application asking for attention is switched to, rather than only highlighted",
hypr: { path: ["misc", "focus_on_activate"], option: "misc:focus_on_activate", readAs: "bool" } hypr: { path: ["misc", "focus_on_activate"], option: "misc:focus_on_activate", readAs: "bool" }
}, },
{
key: "windowSwallow", type: "bool", def: false, group: "multitasking",
label: "Hide the terminal that launched a window",
detail: "A terminal disappears while an application started from it is open, and returns when it closes",
hypr: { path: ["misc", "enable_swallow"], option: "misc:enable_swallow", readAs: "bool" }
},
{ {
key: "mouseMoveFocusesMonitor", type: "bool", def: true, group: "multitasking", key: "mouseMoveFocusesMonitor", type: "bool", def: true, group: "multitasking",
label: "Pointer changes active display", label: "Pointer changes active display",
@@ -702,6 +800,14 @@ Singleton {
detail: "Moves the magnified view in increments rather than gliding with the pointer", detail: "Moves the magnified view in increments rather than gliding with the pointer",
hypr: { path: ["cursor", "zoom_rigid"], option: "cursor:zoom_rigid", readAs: "bool" } hypr: { path: ["cursor", "zoom_rigid"], option: "cursor:zoom_rigid", readAs: "bool" }
}, },
{
key: "highContrast", type: "bool", def: false, group: "accessibility",
label: "High contrast",
detail: "Increases contrast in applications that support it. Modern GTK applications read this from the desktop portal and restyle themselves; older ones need a high-contrast theme, which is not installed here.",
// No hypr mapping: this is a GNOME interface setting the portal
// republishes as org.freedesktop.appearance contrast, which is what
// libadwaita actually reads. DesktopStyle applies it.
},
{ {
key: "dimInactive", type: "bool", def: false, group: "accessibility", key: "dimInactive", type: "bool", def: false, group: "accessibility",
label: "Dim inactive windows", label: "Dim inactive windows",
@@ -716,6 +822,22 @@ Singleton {
hypr: { path: ["decoration", "dim_strength"], option: "decoration:dim_strength", readAs: "float" } hypr: { path: ["decoration", "dim_strength"], option: "decoration:dim_strength", readAs: "float" }
}, },
// ── Gaming ──────────────────────────────────────────────────────────
// What Panama does while a game runs. gamemode tells us when that
// starts and stops through its own hook scripts, so these are real
// behaviours rather than hints -- and each one is undone afterwards to
// whatever it was before, not to a default.
{
key: "gamingPerformanceProfile", type: "bool", def: true, group: "gaming",
label: "Use the performance power profile",
detail: "Switches while a game runs and switches back when it exits"
},
{
key: "gamingNotifyOnStart", type: "bool", def: false, group: "gaming",
label: "Say when Game Mode engages",
detail: "A notification when a game requests it, which is otherwise invisible"
},
// ── Night light ───────────────────────────────────────────────────── // ── Night light ─────────────────────────────────────────────────────
{ {
key: "nightLightEnabled", type: "bool", def: false, group: "nightLight", key: "nightLightEnabled", type: "bool", def: false, group: "nightLight",
@@ -738,6 +860,19 @@ Singleton {
// ── Desktop background ────────────────────────────────────────────── // ── Desktop background ──────────────────────────────────────────────
// Applied through hyprpaper's IPC. Not an hl.config option, so it has // Applied through hyprpaper's IPC. Not an hl.config option, so it has
// no `hypr` block; services/Wallpaper.qml owns applying it. // no `hypr` block; services/Wallpaper.qml owns applying it.
// One folder, not four. The picker used to sweep ~/Pictures/Wallpapers,
// ~/Pictures/Backgrounds, ~/.local/share/backgrounds and
// /usr/share/backgrounds, which meant the distribution's stock
// images turned up mixed in with the user's own and there was no
// way to say "only mine". Where wallpapers live is a thing somebody
// knows about their own machine; it is a setting, not a search.
{
key: "wallpaperDir", type: "string", def: "Pictures/Wallpapers", group: "wallpaper",
pattern: "^~?/?[A-Za-z0-9 ._/+@'-]{1,160}$",
label: "Wallpaper folder",
detail: "Where the picker looks. Relative to your home folder unless it starts with /"
},
{ {
key: "wallpaperPath", type: "string", def: "", group: "wallpaper", key: "wallpaperPath", type: "string", def: "", group: "wallpaper",
// Reaches hyprpaper as the "<output>,<path>" argument form, so a // Reaches hyprpaper as the "<output>,<path>" argument form, so a
@@ -852,14 +987,14 @@ Singleton {
detail: "A time earlier than the start simply means the next morning" detail: "A time earlier than the start simply means the next morning"
}, },
// ── Colour scheme ─────────────────────────────────────────────────── // ── Color scheme ───────────────────────────────────────────────────
// Light is Tokyo Night Day, the official light variant, rather than a // Light is Tokyo Night Day, the official light variant, rather than a
// palette invented to merely not be dark. Both share the same hues at // palette invented to merely not be dark. Both share the same hues at
// different lightness, which is what keeps the Prism identity intact // different lightness, which is what keeps the Prism identity intact
// across the switch. // across the switch.
// //
// services/ColorScheme.qml pushes the choice to GTK and to the // services/ColorScheme.qml pushes the choice to GTK and to the
// compositor's border colours, because an application toolbar or a // compositor's border colors, because an application toolbar or a
// window border still wearing the other scheme is more jarring than // window border still wearing the other scheme is more jarring than
// either scheme on its own. // either scheme on its own.
{ {
@@ -871,6 +1006,39 @@ Singleton {
{ value: "light", label: "Light" } { value: "light", label: "Light" }
] ]
}, },
{
key: "accentName", type: "enum", def: "blue", group: "appearance",
label: "Accent color",
detail: "Drives the focused window border, the bar hairline, and every active state",
// NAMED accents, not a free color. Each name carries a curated
// pair per scheme, because one hex cannot serve both: a color
// legible on the dark ground is usually illegible on the light one.
// The palette and its measured contrast live in config/Theme.qml,
// which is also what stops this list drifting from what is drawn.
options: [
{ value: "blue", label: "Prism blue" },
{ value: "orchid", label: "Orchid" },
{ value: "teal", label: "Teal" },
{ value: "green", label: "Green" },
{ value: "amber", label: "Amber" },
{ value: "orange", label: "Orange" },
{ value: "rose", label: "Rose" },
{ value: "slate", label: "Slate" }
]
},
{
key: "themeProfileId", type: "string", def: "moon", group: "appearance",
pattern: "^[a-z0-9][a-z0-9-]{0,63}$",
label: "Selected theme profile",
detail: "The shipped or saved theme currently applied to the desktop",
internal: true
},
{
key: "themeProfiles", type: "json", def: [], group: "appearance",
label: "Saved theme profiles",
detail: "Named custom colour schemes and accent pairs",
internal: true
},
// ── Application themes ───────────────────────────────────────────── // ── Application themes ─────────────────────────────────────────────
// ColorScheme owns GTK's light/dark theme. These are the two theme // ColorScheme owns GTK's light/dark theme. These are the two theme
@@ -978,7 +1146,7 @@ Singleton {
}, },
// ── Application titlebars ────────────────────────────────────────── // ── Application titlebars ──────────────────────────────────────────
// These affect applications that honour GNOME's window preferences. // These affect applications that honor GNOME's window preferences.
// Hyprland itself has no server-side titlebar buttons, so minimize is // Hyprland itself has no server-side titlebar buttons, so minimize is
// deliberately absent rather than presented as a switch that lies. // deliberately absent rather than presented as a switch that lies.
{ {
@@ -1041,7 +1209,7 @@ Singleton {
// ── Which GPU the vitals readout tracks ───────────────────────────── // ── Which GPU the vitals readout tracks ─────────────────────────────
// A sysfs path rather than a card number, because the number is neither // A sysfs path rather than a card number, because the number is neither
// stable across machines nor meaningful. Constrained to the one shape // stable across machines nor meaningful. Constrained to the one shape
// that can be read for utilisation; VitalsWidget hides itself when the // that can be read for utilization; VitalsWidget hides itself when the
// path is unreadable, so a stale value degrades to no readout rather // path is unreadable, so a stale value degrades to no readout rather
// than a wrong one. // than a wrong one.
{ {
@@ -1057,7 +1225,7 @@ Singleton {
// Coordinates rather than a place name, because that is what Open-Meteo // Coordinates rather than a place name, because that is what Open-Meteo
// takes and it needs no API key. weatherLocation is only the label shown // takes and it needs no API key. weatherLocation is only the label shown
// in the UI; it is never sent anywhere, so it can say whatever makes the // in the UI; it is never sent anywhere, so it can say whatever makes the
// reading recognisable. // reading recognizable.
{ {
key: "weatherLatitude", type: "real", def: 27.7375, min: -90, max: 90, step: 0.0001, key: "weatherLatitude", type: "real", def: 27.7375, min: -90, max: 90, step: 0.0001,
group: "weather", internal: true, group: "weather", internal: true,
@@ -1117,25 +1285,23 @@ Singleton {
// Directories and encoder arguments are enums rather than free text: // Directories and encoder arguments are enums rather than free text:
// both are handed to a recorder process, and an arbitrary string there // both are handed to a recorder process, and an arbitrary string there
// is a much larger surface than a settings page needs to expose. // is a much larger surface than a settings page needs to expose.
// Free text rather than three choices. The three were a guess at
// where somebody keeps screenshots, and a guess cannot include the
// folder the rest of their software already writes to -- which is
// the only folder that matters. A path starting with / is taken as
// absolute, so a drive that is not under home works too.
{ {
key: "screenshotDir", type: "enum", def: "Pictures/Screenshots", group: "capture", key: "screenshotDir", type: "string", def: "Pictures/Screenshots", group: "capture",
pattern: "^~?/?[A-Za-z0-9 ._/+@'-]{1,160}$",
label: "Screenshot folder", label: "Screenshot folder",
detail: "Folder under your home directory for screenshots", detail: "Where screenshots are saved. Relative to your home folder unless it starts with /"
options: [
{ value: "Pictures/Screenshots", label: "Pictures / Screenshots" },
{ value: "Pictures", label: "Pictures" },
{ value: "Desktop", label: "Desktop" }
]
}, },
{ {
key: "recordingDir", type: "enum", def: "Videos/Recordings", group: "capture", key: "recordingDir", type: "string", def: "Videos/Screencasts", group: "capture",
pattern: "^~?/?[A-Za-z0-9 ._/+@'-]{1,160}$",
label: "Recording folder", label: "Recording folder",
detail: "Folder under your home directory for screen recordings", detail: "Where screen recordings are saved. Relative to your home folder unless it starts with /"
options: [
{ value: "Videos/Recordings", label: "Videos / Recordings" },
{ value: "Videos", label: "Videos" },
{ value: "Desktop", label: "Desktop" }
]
}, },
{ {
key: "recorderArgs", type: "enum", def: "-c h264_vaapi -d /dev/dri/renderD128", key: "recorderArgs", type: "enum", def: "-c h264_vaapi -d /dev/dri/renderD128",
@@ -1168,7 +1334,7 @@ Singleton {
"com.bitwarden.desktop", "org.gnome.Software", "helium", "com.bitwarden.desktop", "org.gnome.Software", "helium",
"org.mozilla.thunderbird_esr", "com.slack.Slack", "org.mozilla.thunderbird_esr", "com.slack.Slack",
"app.bluebubbles.BlueBubbles", "rustdesk", "app.bluebubbles.BlueBubbles", "rustdesk",
"io.podman_desktop.PodmanDesktop", "claude-desktop", "io.podman_desktop.PodmanDesktop", "com.anthropic.Claude",
"codex-desktop", "md.obsidian.Obsidian", "codex-desktop", "md.obsidian.Obsidian",
"com.obsproject.Studio", "steam" "com.obsproject.Studio", "steam"
] ]
@@ -1192,7 +1358,7 @@ Singleton {
// ── Display configuration ─────────────────────────────────────────── // ── Display configuration ───────────────────────────────────────────
// { "<output>": { mode, scale, transform, x, y, primary } }, applied by // { "<output>": { mode, scale, transform, x, y, primary } }, applied by
// hypr/monitors.lua on top of the shipped values. Colour management and // hypr/monitors.lua on top of the shipped values. Color management and
// bit depth are deliberately not here: those carry a documented // bit depth are deliberately not here: those carry a documented
// screencopy tradeoff that a settings page cannot explain at the moment // screencopy tradeoff that a settings page cannot explain at the moment
// you would be changing it. // you would be changing it.
@@ -1305,7 +1471,7 @@ Singleton {
case "string": { case "string": {
const text = typeof value === "string" ? value : String(value); const text = typeof value === "string" ? value : String(value);
// A constrained string is rejected rather than sanitised. Several // A constrained string is rejected rather than sanitised. Several
// of these are serialised into an hl.config payload, and quietly // of these are serialized into an hl.config payload, and quietly
// stripping characters would turn a typo into a different setting // stripping characters would turn a typo into a different setting
// instead of an error the user can see. // instead of an error the user can see.
if (entry.pattern && !new RegExp(entry.pattern).test(text)) if (entry.pattern && !new RegExp(entry.pattern).test(text))
config/dot/quickshell/config/Settings.qml
+6 -1
View File
@@ -62,7 +62,12 @@ Singleton {
readonly property int focusDurationMinutes: DesktopPreferences.get("focusDurationMinutes") readonly property int focusDurationMinutes: DesktopPreferences.get("focusDurationMinutes")
// ── Dock ──────────────────────────────────────────────────────────────── // ── Dock ────────────────────────────────────────────────────────────────
// Pinned apps, in order, taken from the GNOME dash favourites. // Pinned apps, in order, taken from the GNOME dash favorites.
readonly property string dockPosition: DesktopPreferences.get("dockPosition")
readonly property var dockScreens: {
const stored = DesktopPreferences.get("dockScreens");
return Array.isArray(stored) ? stored : [];
}
readonly property var dockPinned: DesktopPreferences.get("dockPinned") readonly property var dockPinned: DesktopPreferences.get("dockPinned")
// Dash-to-Dock was set to intellihide against all windows: the dock hides // Dash-to-Dock was set to intellihide against all windows: the dock hides
config/dot/quickshell/config/Theme.qml
+47 -15
View File
@@ -1,9 +1,9 @@
pragma Singleton pragma Singleton
// ───────────────────────────────────────────────────────────────────────────── // ─────────────────────────────────────────────────────────────────────────────
// Tokyo Night Moon — the single source of truth for every colour, radius, // Tokyo Night Moon — the single source of truth for every color, radius,
// duration and font in the shell. Nothing below this file should hardcode a // duration and font in the shell. Nothing below this file should hardcode a
// colour; if you find yourself writing "#" outside this file, add a token here. // color; if you find yourself writing "#" outside this file, add a token here.
// //
// The bar keeps GNOME's 36px information density but sits directly on the // The bar keeps GNOME's 36px information density but sits directly on the
// desktop, edge to edge. The dock retains the former glass vocabulary: bottom, // desktop, edge to edge. The dock retains the former glass vocabulary: bottom,
@@ -14,11 +14,12 @@ import Quickshell
// QtQuick is required even though nothing visual is declared here: `color` is a // QtQuick is required even though nothing visual is declared here: `color` is a
// QtQuick value type, and Qt.rgba() lives in its JS namespace. // QtQuick value type, and Qt.rgba() lives in its JS namespace.
import QtQuick import QtQuick
import qs.services
Singleton { Singleton {
id: root id: root
// ── Colour scheme ─────────────────────────────────────────────────────── // ── Color scheme ───────────────────────────────────────────────────────
// Tokyo Night ships an official light variant (Day), so light mode is that // Tokyo Night ships an official light variant (Day), so light mode is that
// rather than a palette invented to merely not be dark. The two share the // rather than a palette invented to merely not be dark. The two share the
// same hues at different lightness, which is what lets the Prism identity // same hues at different lightness, which is what lets the Prism identity
@@ -42,13 +43,38 @@ Singleton {
readonly property color fgMuted: root.dark ? "#636da6" : "#848cb5" readonly property color fgMuted: root.dark ? "#636da6" : "#848cb5"
readonly property color gutter: root.dark ? "#3b4261" : "#a8aecb" readonly property color gutter: root.dark ? "#3b4261" : "#a8aecb"
// The pair. `accent` is the primary and carries every state meaning // ── The accent ──────────────────────────────────────────────────────────
// (focused, active, on). `accentSecondary` is the orchid from the tmux //
// theme — it never appears alone, only as the far end of a gradient. That // `accent` is the primary and carries every state meaning (focused, active,
// restraint is the whole point: the two colours meeting is the signature, // on). `accentSecondary` never appears alone, only as the far end of a
// so the pink stops being special the moment it's used as a flat fill. // gradient. That restraint is the whole point: the two colors meeting is
readonly property color accent: root.dark ? "#82aaff" : "#2e7de9" // blue // the signature, so the second color stops being special the moment it is
readonly property color accentSecondary: root.dark ? "#b172b0" : "#9854f1" // orchid, from tmux // used as a flat fill.
//
// NAMED accents rather than a free color. Each name carries a curated
// triple per scheme, because an arbitrary hex cannot work in both: a color
// legible on the Moon background is usually illegible on the Day one, and a
// picker that lets someone choose an unreadable desktop is not a feature.
// Every pair below measures at least 3:1 against the ground it sits on.
// This is also GNOME's model, which is the parity being chased.
//
// Blue is the shipped Prism -- blue leading, orchid following -- and stays
// the default.
//
// The table itself lives in services/ThemeProfileModel.js so a curated
// accent and a custom profile are the same kind of record. Its `gnome`
// member is the nearest name in GNOME's own accent-color enum, which is a
// fixed list of nine we do not get to extend; it is what libadwaita
// applications -- Files, Papers, Loupe -- are told to use, so choosing an
// accent here recolors them too instead of leaving them in GNOME blue.
readonly property var accents: ThemeProfiles.curatedAccents
readonly property var activeProfile: ThemeProfiles.activeProfile
// ThemeProfiles validates every persisted record before it can become
// active, so these bindings are both reactive and safe to expose as the
// shell-wide colour roles.
readonly property color accent: root.activeProfile.accent
readonly property color accentSecondary: root.activeProfile.secondary
readonly property color accentAlt: root.dark ? "#65bcff" : "#007197" // blue1, a lighter blue readonly property color accentAlt: root.dark ? "#65bcff" : "#007197" // blue1, a lighter blue
readonly property color cyan: root.dark ? "#86e1fc" : "#007197" readonly property color cyan: root.dark ? "#86e1fc" : "#007197"
readonly property color teal: root.dark ? "#4fd6be" : "#118c74" readonly property color teal: root.dark ? "#4fd6be" : "#118c74"
@@ -75,6 +101,13 @@ Singleton {
// light one, and text on it stops being legible. // light one, and text on it stops being legible.
readonly property real dockAlpha: root.dark ? 0.34 : 0.62 readonly property real dockAlpha: root.dark ? 0.34 : 0.62
readonly property real popoverAlpha: root.dark ? 0.92 : 0.97 readonly property real popoverAlpha: root.dark ? 0.92 : 0.97
// Toasts sit a little lighter than a popover you opened on purpose. A
// notification arrives unbidden over whatever you were doing, and at full
// popover weight it reads as a dialog demanding an answer -- but the 6%
// foreground tint it used to have left the text competing with the desktop
// behind it. This is the point between the two.
readonly property real toastAlpha: root.dark ? 0.86 : 0.94
readonly property real overlayAlpha: root.dark ? 0.55 : 0.40 readonly property real overlayAlpha: root.dark ? 0.55 : 0.40
readonly property real hoverAlpha: root.dark ? 0.14 : 0.10 readonly property real hoverAlpha: root.dark ? 0.14 : 0.10
readonly property real activeAlpha: root.dark ? 0.24 : 0.18 readonly property real activeAlpha: root.dark ? 0.24 : 0.18
@@ -84,7 +117,7 @@ Singleton {
readonly property int barGap: 6 // breathing room below the bar for popovers readonly property int barGap: 6 // breathing room below the bar for popovers
readonly property int barSideMargin: 10 // inset for floating popovers readonly property int barSideMargin: 10 // inset for floating popovers
readonly property int dockIconSize: 48 readonly property int dockIconSize: DesktopPreferences.get("dockIconSize")
readonly property int dockPadding: 8 readonly property int dockPadding: 8
readonly property int dockGap: 8 readonly property int dockGap: 8
readonly property int dockRadius: 20 readonly property int dockRadius: 20
@@ -93,7 +126,6 @@ Singleton {
readonly property int popoverPadding: 14 readonly property int popoverPadding: 14
readonly property int popoverWidth: 380 readonly property int popoverWidth: 380
readonly property int controlCenterWidth: 430 readonly property int controlCenterWidth: 430
readonly property int controlCenterTopGap: 2
readonly property int cardRadius: 12 readonly property int cardRadius: 12
readonly property int pillRadius: 999 readonly property int pillRadius: 999
@@ -108,7 +140,7 @@ Singleton {
// Nerd Font, used ONLY to draw icon glyphs — never for text. It is the // Nerd Font, used ONLY to draw icon glyphs — never for text. It is the
// pragmatic alternative to freedesktop symbolic icons, which ship with a // pragmatic alternative to freedesktop symbolic icons, which ship with a
// hardcoded dark fill Qt will not recolour (see widgets/ThemedIcon.qml). // hardcoded dark fill Qt will not recolor (see widgets/ThemedIcon.qml).
readonly property string fontMono: DesktopPreferences.get("iconFont") readonly property string fontMono: DesktopPreferences.get("iconFont")
// Apply to any text whose digits change in place — clocks, percentages, // Apply to any text whose digits change in place — clocks, percentages,
@@ -152,7 +184,7 @@ Singleton {
} }
// Blend two tokens — used for hover/pressed states so we never invent a // Blend two tokens — used for hover/pressed states so we never invent a
// colour that isn't derived from the palette. // color that isn't derived from the palette.
function mix(a: color, b: color, ratio: real): color { function mix(a: color, b: color, ratio: real): color {
return Qt.rgba(a.r + (b.r - a.r) * ratio, a.g + (b.g - a.g) * ratio, a.b + (b.b - a.b) * ratio, a.a + (b.a - a.a) * ratio); return Qt.rgba(a.r + (b.r - a.r) * ratio, a.g + (b.g - a.g) * ratio, a.b + (b.b - a.b) * ratio, a.a + (b.a - a.a) * ratio);
} }
@@ -163,7 +195,7 @@ Singleton {
// the active workspace pill and slider fills. // the active workspace pill and slider fills.
// //
// Where the gradient runs left-to-right the blue leads, because the eye // Where the gradient runs left-to-right the blue leads, because the eye
// reads left first and blue is the colour that carries meaning. // reads left first and blue is the color that carries meaning.
readonly property real prismStart: 0.22 readonly property real prismStart: 0.22
readonly property real prismEnd: 0.78 readonly property real prismEnd: 0.78
config/dot/quickshell/displays-harness.qml
+9 -1
View File
@@ -6,6 +6,10 @@ import qs.config
import qs.services import qs.services
ShellRoot { ShellRoot {
// The isolated screen model begins with both fixture outputs so changing
// it below exercises the same reactive topology path as a real hotplug.
Component.onCompleted: Displays.screenOverride = ["DP-2", "HDMI-A-1"]
IpcHandler { IpcHandler {
target: "displays-test" target: "displays-test"
@@ -42,6 +46,7 @@ ShellRoot {
function transactionStatus(): string { function transactionStatus(): string {
return JSON.stringify({ return JSON.stringify({
layout: Displays.currentLayout(), layout: Displays.currentLayout(),
primaryFirst: Displays.primaryFirstMonitors.map(monitor => monitor.name),
pending: Displays.pendingRequestedLayout, pending: Displays.pendingRequestedLayout,
previous: Displays.pendingPreviousLayout, previous: Displays.pendingPreviousLayout,
reverting: Displays.revertExpectedLayout, reverting: Displays.revertExpectedLayout,
@@ -83,7 +88,7 @@ ShellRoot {
} }
function refreshIdentityFixture(): string { function refreshIdentityFixture(): string {
const modes = Displays.normaliseModes([ const modes = Displays.normalizeModes([
"[email protected]", "[email protected]",
"[email protected]" "[email protected]"
]); ]);
@@ -141,5 +146,8 @@ ShellRoot {
if (monitor) Displays.forget(monitor.name); if (monitor) Displays.forget(monitor.name);
} }
function refresh(): void { Displays.refresh(); } function refresh(): void { Displays.refresh(); }
function setScreenModel(names: string): void {
Displays.screenOverride = JSON.parse(names);
}
} }
} }
config/dot/quickshell/migrations-harness.qml
+2 -2
View File
@@ -1,9 +1,9 @@
// Exercises Migrations.applyWith against fixture steps and prints a verdict per // Exercises Migrations.applyWith against fixture steps and prints a verdict per
// case. Run by tests/quickshell/migrations-contract.sh. // case. Run by tests/quickshell/migrations-contract.
// //
// Fixture steps rather than the real list: the real one is empty until the // Fixture steps rather than the real list: the real one is empty until the
// first breaking schema change, and a mechanism that has never been run against // first breaking schema change, and a mechanism that has never been run against
// a failing step is not one to discover the behaviour of during an upgrade. // a failing step is not one to discover the behavior of during an upgrade.
import Quickshell import Quickshell
import QtQuick import QtQuick
config/dot/quickshell/modules/bar/ActivityPanel.qml
+25 -8
View File
@@ -15,7 +15,11 @@ PanelWindow {
color: "transparent" color: "transparent"
anchors.top: true anchors.top: true
anchors.right: true anchors.right: true
margins.top: Theme.barHeight + Theme.barGap * 2 // The gap ALONE, not the bar height plus the gap. exclusiveZone 0 means
// "reserve nothing, but respect what others reserved", so this surface
// already begins below the bar's zone -- adding the bar height here counted
// it twice and left the surface floating 48px under the bar instead of 12.
margins.top: Theme.barGap * 2
margins.right: Theme.barSideMargin margins.right: Theme.barSideMargin
exclusiveZone: 0 exclusiveZone: 0
implicitWidth: 350 implicitWidth: 350
@@ -25,10 +29,18 @@ PanelWindow {
WlrLayershell.layer: WlrLayer.Overlay WlrLayershell.layer: WlrLayer.Overlay
WlrLayershell.keyboardFocus: WlrKeyboardFocus.None WlrLayershell.keyboardFocus: WlrKeyboardFocus.None
// Deliberately does not read Capture.recordingSeconds (or anything else
// that ticks once a second): this array is a plain JS array, not an
// identity-preserving model, so any dependency that changes every second
// would make the whole thing re-derive every second, and the Repeater
// below would destroy and recreate every row -- including one the user
// might be hovering or about to click. The set of activities should only
// change when an activity actually starts or stops. Elapsed time is
// rendered by each row's own Text binding instead, further down.
readonly property var activities: { readonly property var activities: {
const result = []; const result = [];
if (PrivacyState.recordingActive) if (PrivacyState.recordingActive)
result.push({ kind: "recording", glyph: "\u{F044A}", label: "Screen recording", detail: "Panama · " + root.elapsed(), tone: "danger", stoppable: true }); result.push({ kind: "recording", glyph: "\u{F044A}", label: "Screen recording", detail: "Panama", tone: "danger", stoppable: true });
if (PrivacyState.screenSharingActive) if (PrivacyState.screenSharingActive)
result.push({ kind: "screen", glyph: "\u{F0379}", label: "Screen sharing", detail: PrivacyState.screenSharingApp || "Managed by the application", tone: "warn", stoppable: false }); result.push({ kind: "screen", glyph: "\u{F0379}", label: "Screen sharing", detail: PrivacyState.screenSharingApp || "Managed by the application", tone: "warn", stoppable: false });
if (PrivacyState.cameraActive) if (PrivacyState.cameraActive)
@@ -38,11 +50,12 @@ PanelWindow {
return result; return result;
} }
function elapsed(): string { // Pure formatter, no ticking property read here -- callers decide what
const total = Capture.recordingSeconds; // seconds value to pass, and only they take on the per-second dependency.
const seconds = String(total % 60).padStart(2, "0"); function formatElapsed(totalSeconds: int): string {
const minutes = Math.floor(total / 60) % 60; const seconds = String(totalSeconds % 60).padStart(2, "0");
const hours = Math.floor(total / 3600); const minutes = Math.floor(totalSeconds / 60) % 60;
const hours = Math.floor(totalSeconds / 3600);
return hours > 0 ? `${hours}:${String(minutes).padStart(2, "0")}:${seconds}` : `${minutes}:${seconds}`; return hours > 0 ? `${hours}:${String(minutes).padStart(2, "0")}:${seconds}` : `${minutes}:${seconds}`;
} }
@@ -164,7 +177,11 @@ PanelWindow {
Text { Text {
width: parent.width width: parent.width
text: activityRow.modelData.detail // Only this Text re-evaluates every second while
// recording -- Capture.recordingSeconds is read
// here, not in the parent `activities` array, so
// the row itself is never torn down for a tick.
text: activityRow.modelData.kind === "recording" ? activityRow.modelData.detail + " · " + root.formatElapsed(Capture.recordingSeconds) : activityRow.modelData.detail
color: Theme.fgDim color: Theme.fgDim
elide: Text.ElideRight elide: Text.ElideRight
font.family: Theme.fontFamily font.family: Theme.fontFamily
config/dot/quickshell/modules/bar/Bar.qml
+2 -2
View File
@@ -10,7 +10,7 @@
// Bar {} // Bar {}
// } // }
// //
// Layout mirrors GNOME's: workspaces + vitals left, clock + weather centre, // Layout mirrors GNOME's: workspaces + vitals left, clock + weather center,
// media + tray + status cluster right. // media + tray + status cluster right.
import Quickshell import Quickshell
@@ -83,7 +83,7 @@ PanelWindow {
} }
} }
// ── Centre ────────────────────────────────────────────────────────── // ── Center ──────────────────────────────────────────────────────────
Row { Row {
anchors.horizontalCenter: parent.horizontalCenter anchors.horizontalCenter: parent.horizontalCenter
anchors.verticalCenter: parent.verticalCenter anchors.verticalCenter: parent.verticalCenter
config/dot/quickshell/modules/bar/CalendarPopup.qml
-222
View File
@@ -1,222 +0,0 @@
// The calendar that drops out of the clock — GNOME's date menu, minus the
// notification list (that lives in its own panel). Month grid, today marked
// with the accent, arrows to page through months, current weather at the foot.
import Quickshell
import QtQuick
import qs.config
import qs.services
import qs.widgets
Popover {
id: root
// Popover's container is a plain Item, which does not derive an implicit
// size from its children, so the window has to be sized from the body.
implicitWidth: body.implicitWidth + contentPadding * 2
implicitHeight: body.implicitHeight + contentPadding * 2
readonly property int cellSize: 34
readonly property int cellHeight: 30
// Hours precision is enough: the only thing that has to change on its own
// is which cell counts as "today", and that only moves at midnight.
SystemClock {
id: clock
precision: SystemClock.Hours
}
readonly property int todayYear: clock.date.getFullYear()
readonly property int todayMonth: clock.date.getMonth()
readonly property int todayDay: clock.date.getDate()
// The month currently on screen. Reset to today every time the popover
// opens, so it never comes back showing wherever you paged off to.
property int viewYear: root.todayYear
property int viewMonth: root.todayMonth
onVisibleChanged: if (visible)
root.showToday()
function showToday(): void {
root.viewYear = root.todayYear;
root.viewMonth = root.todayMonth;
}
function stepMonth(delta: int): void {
const d = new Date(root.viewYear, root.viewMonth + delta, 1);
root.viewYear = d.getFullYear();
root.viewMonth = d.getMonth();
}
// Six weeks of cells, so the grid height never changes as you page through
// months. Days from the neighbouring months fill the edges, dimmed.
readonly property var cells: {
const first = new Date(root.viewYear, root.viewMonth, 1);
const offset = first.getDay(); // 0 = Sunday, matching the header row
const inThisMonth = new Date(root.viewYear, root.viewMonth + 1, 0).getDate();
const inPrevMonth = new Date(root.viewYear, root.viewMonth, 0).getDate();
const out = [];
for (let i = 0; i < 42; i++) {
const n = i - offset + 1;
if (n < 1)
out.push({
day: inPrevMonth + n,
current: false
});
else if (n > inThisMonth)
out.push({
day: n - inThisMonth,
current: false
});
else
out.push({
day: n,
current: true
});
}
return out;
}
Column {
id: body
spacing: Theme.itemSpacing
// ── Month header ────────────────────────────────────────────────────
Item {
width: root.cellSize * 7
height: 28
CalendarArrow {
anchors.left: parent.left
anchors.verticalCenter: parent.verticalCenter
glyph: "\u{F0141}" // md-chevron_left
onActivated: root.stepMonth(-1)
}
Text {
anchors.centerIn: parent
text: Qt.formatDateTime(new Date(root.viewYear, root.viewMonth, 1), "MMMM yyyy")
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeLarge
font.weight: Font.DemiBold
color: Theme.fg
MouseArea {
anchors.fill: parent
cursorShape: Qt.PointingHandCursor
onClicked: root.showToday()
}
}
CalendarArrow {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
glyph: "\u{F0142}" // md-chevron_right
onActivated: root.stepMonth(1)
}
}
// ── Weekday header ──────────────────────────────────────────────────
Row {
Repeater {
model: ["S", "M", "T", "W", "T", "F", "S"]
delegate: Text {
required property string modelData
width: root.cellSize
height: 20
text: modelData
horizontalAlignment: Text.AlignHCenter
verticalAlignment: Text.AlignVCenter
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
color: Theme.fgMuted
}
}
}
// ── Day grid ────────────────────────────────────────────────────────
Grid {
columns: 7
Repeater {
model: root.cells
delegate: Item {
id: cell
required property var modelData
readonly property bool isToday: cell.modelData.current && cell.modelData.day === root.todayDay && root.viewMonth === root.todayMonth && root.viewYear === root.todayYear
width: root.cellSize
height: root.cellHeight
Rectangle {
anchors.centerIn: parent
width: root.cellHeight - 2
height: root.cellHeight - 2
radius: width / 2
border.width: 0
visible: cell.isToday
color: Theme.accent
}
Text {
anchors.centerIn: parent
text: cell.modelData.day
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
font.weight: cell.isToday ? Font.DemiBold : Font.Normal
color: {
if (cell.isToday)
return Theme.bgDark;
return cell.modelData.current ? Theme.fg : Theme.fgMuted;
}
}
}
}
}
// ── Weather ─────────────────────────────────────────────────────────
Rectangle {
width: root.cellSize * 7
height: 1
color: Theme.alpha(Theme.fg, 0.1)
visible: Weather.available
}
Row {
spacing: Theme.itemSpacing
visible: Weather.available
Text {
anchors.verticalCenter: parent.verticalCenter
text: Weather.icon
font.family: Theme.fontMono
font.pixelSize: Theme.fontSizeTitle
color: Theme.accentAlt
}
Column {
Text {
text: Math.round(Weather.temperature) + Weather.unitSuffix
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
color: Theme.fg
}
Text {
text: Weather.description
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
color: Theme.fgDim
}
}
}
}
}
config/dot/quickshell/modules/bar/Clock.qml
+2 -2
View File
@@ -1,4 +1,4 @@
// The centre clock, kept in the same place and the same format GNOME had it: // The center clock, kept in the same place and the same format GNOME had it:
// weekday, date, 12-hour time with seconds. Clicking it opens the calendar, // weekday, date, 12-hour time with seconds. Clicking it opens the calendar,
// exactly like GNOME's date menu. // exactly like GNOME's date menu.
@@ -35,7 +35,7 @@ Pill {
anchors.verticalCenter: parent.verticalCenter anchors.verticalCenter: parent.verticalCenter
text: Qt.formatDateTime(clock.date, root.format) text: Qt.formatDateTime(clock.date, root.format)
font.family: Theme.fontFamily font.family: Theme.fontFamily
// Seconds tick once a second in the centre of the bar; without tabular // Seconds tick once a second in the center of the bar; without tabular
// figures the whole clock shifts sideways on every digit change. // figures the whole clock shifts sideways on every digit change.
font.features: Theme.tabularFigures font.features: Theme.tabularFigures
font.pixelSize: Theme.fontSize font.pixelSize: Theme.fontSize
config/dot/quickshell/modules/bar/StatusCluster.qml
+1 -1
View File
@@ -62,7 +62,7 @@ Pill {
if (!root.wifiNetwork) if (!root.wifiNetwork)
return "\u{F092D}"; // md-wifi_strength_off return "\u{F092D}"; // md-wifi_strength_off
// NetworkManager reports strength 0-100; some backends normalise to // NetworkManager reports strength 0-100; some backends normalize to
// 0-1, so accept either rather than showing one bar forever. // 0-1, so accept either rather than showing one bar forever.
const raw = root.wifiNetwork.signalStrength ?? 0; const raw = root.wifiNetwork.signalStrength ?? 0;
const strength = raw <= 1 ? raw * 100 : raw; const strength = raw <= 1 ? raw * 100 : raw;
config/dot/quickshell/modules/bar/VitalsField.qml
+1 -1
View File
@@ -1,5 +1,5 @@
// One glyph + percentage pair inside VitalsWidget. Split out so the three // One glyph + percentage pair inside VitalsWidget. Split out so the three
// fields cannot drift apart in spacing, width or colour thresholds. // fields cannot drift apart in spacing, width or color thresholds.
import QtQuick import QtQuick
import qs.config import qs.config
config/dot/quickshell/modules/bar/VitalsWidget.qml
+1 -1
View File
@@ -2,7 +2,7 @@
// Vitals extension was configured with (_processor_usage_, _memory_usage_, // Vitals extension was configured with (_processor_usage_, _memory_usage_,
// _gpu#1_usage_). // _gpu#1_usage_).
// //
// Values are colour-coded rather than graphed: at bar size a number you can // Values are color-coded rather than graphed: at bar size a number you can
// glance at beats a sparkline you have to squint at. // glance at beats a sparkline you have to squint at.
import QtQuick import QtQuick
config/dot/quickshell/modules/bar/Workspaces.qml
+2 -2
View File
@@ -36,7 +36,7 @@ Item {
implicitWidth: row.implicitWidth + 12 implicitWidth: row.implicitWidth + 12
// Full bar height makes (0, 0) part of the wheel target. The dots stay // Full bar height makes (0, 0) part of the wheel target. The dots stay
// optically centred by the row and active-pill geometry below. // optically centered by the row and active-pill geometry below.
implicitHeight: Theme.barHeight implicitHeight: Theme.barHeight
// Scroll over the padding either side of the row, not just over a dot. // Scroll over the padding either side of the row, not just over a dot.
@@ -59,7 +59,7 @@ Item {
border.width: 0 // QTBUG-137166: rounded rects can lose their corners border.width: 0 // QTBUG-137166: rounded rects can lose their corners
// The prism, as a fill rather than a hairline. This is the one element // The prism, as a fill rather than a hairline. This is the one element
// in the bar that is always coloured, so it is where the pair belongs. // in the bar that is always colored, so it is where the pair belongs.
gradient: Gradient { gradient: Gradient {
orientation: Gradient.Horizontal orientation: Gradient.Horizontal
GradientStop { GradientStop {
config/dot/quickshell/modules/capture/CaptureBar.qml
+2 -2
View File
@@ -1,7 +1,7 @@
// The floating control panel at the bottom of the capture overlay. // The floating control panel at the bottom of the capture overlay.
// //
// Layout is a deliberate copy of GNOME 42's screenshot UI: the area segmented // Layout is a deliberate copy of GNOME 42's screenshot UI: the area segmented
// control on top, and below it the shutter dead-centre with "Show Pointer" on // control on top, and below it the shutter dead-center with "Show Pointer" on
// the left and the screenshot/screencast switch on the right. // the left and the screenshot/screencast switch on the right.
import QtQuick import QtQuick
@@ -13,7 +13,7 @@ Rectangle {
signal captureRequested signal captureRequested
// Set by the overlay so the shutter can grey out when Window mode has // Set by the overlay so the shutter can gray out when Window mode has
// nothing pickable (no Hyprland, or an empty workspace). // nothing pickable (no Hyprland, or an empty workspace).
property bool captureEnabled: true property bool captureEnabled: true
config/dot/quickshell/modules/capture/ModeButton.qml
+1 -1
View File
@@ -1,7 +1,7 @@
// One segment of the Screen / Window / Selection control. // One segment of the Screen / Window / Selection control.
// //
// Icons are Nerd Font glyphs rather than freedesktop icons on purpose: the // Icons are Nerd Font glyphs rather than freedesktop icons on purpose: the
// Adwaita "symbolic" SVGs are flat black and Qt, unlike GTK, will not recolour // Adwaita "symbolic" SVGs are flat black and Qt, unlike GTK, will not recolor
// them, so they'd be invisible on this dark overlay. // them, so they'd be invisible on this dark overlay.
import QtQuick import QtQuick
config/dot/quickshell/modules/capture/RecordingIndicator.qml
-109
View File
@@ -1,109 +0,0 @@
// The "you are being recorded" pill.
//
// GNOME puts a red dot and a timer in the top bar while a screencast runs and
// clicking it stops the recording. The bar is another module's window, so this
// is its own tiny layer surface parked just below it.
import Quickshell
import Quickshell.Wayland
import QtQuick
import qs.config
import qs.services
PanelWindow {
id: win
visible: Capture.recording
color: "transparent"
// Top only: with neither left nor right anchored, layer-shell centres the
// surface horizontally.
anchors.top: true
margins.top: Theme.barGap * 2 + Theme.barHeight + Theme.barGap
implicitWidth: pill.implicitWidth
implicitHeight: pill.implicitHeight
exclusiveZone: 0
WlrLayershell.namespace: "qs-popover-recording"
WlrLayershell.layer: WlrLayer.Overlay
WlrLayershell.keyboardFocus: WlrKeyboardFocus.None
function elapsed(): string {
const t = Capture.recordingSeconds;
const s = ("0" + (t % 60)).slice(-2);
const m = Math.floor(t / 60) % 60;
const h = Math.floor(t / 3600);
return h > 0 ? h + ":" + ("0" + m).slice(-2) + ":" + s : m + ":" + s;
}
Rectangle {
id: pill
implicitWidth: row.implicitWidth + 12
implicitHeight: 34
radius: Theme.pillRadius
border.width: 0
color: Theme.redDeep
Row {
id: row
anchors.centerIn: parent
spacing: 8
// Static dot, not a blinking one: nothing in this shell repaints
// while idle.
Rectangle {
anchors.verticalCenter: parent.verticalCenter
width: 10
height: 10
radius: 5
border.width: 0
color: Theme.fg
}
Text {
anchors.verticalCenter: parent.verticalCenter
text: win.elapsed()
color: Theme.fg
// Tabular figures: the timer must not shuffle as it counts.
font.family: Theme.fontFamily
font.features: Theme.tabularFigures
font.pixelSize: Theme.fontSize
font.weight: Font.Medium
}
Rectangle {
id: stop
anchors.verticalCenter: parent.verticalCenter
width: 26
height: 26
radius: width / 2
border.width: 0
color: stopMouse.containsMouse ? Theme.alpha(Theme.fg, 0.28) : Theme.alpha(Theme.fg, 0.14)
Behavior on color {
ColorAnimation {
duration: Theme.durFast
}
}
Text {
anchors.centerIn: parent
text: "󰓛"
color: Theme.fg
font.family: Theme.fontMono
font.pixelSize: Theme.fontSize
}
MouseArea {
id: stopMouse
anchors.fill: parent
hoverEnabled: true
cursorShape: Qt.PointingHandCursor
// SIGINT, so wf-recorder finalises the container.
onClicked: Capture.stopRecording()
}
}
}
}
}
config/dot/quickshell/modules/capture/SelectionLayer.qml
+2 -2
View File
@@ -1,6 +1,6 @@
// Selection mode: a GNOME-style rubber band over the frozen screen. // Selection mode: a GNOME-style rubber band over the frozen screen.
// //
// Behaviours copied from GNOME 42: the overlay opens with a sensible centred // Behaviors copied from GNOME 42: the overlay opens with a sensible centered
// selection already in place (so the shutter is immediately useful), dragging // selection already in place (so the shutter is immediately useful), dragging
// inside moves it, dragging a corner resizes from the opposite corner, and // inside moves it, dragging a corner resizes from the opposite corner, and
// dragging anywhere else starts a fresh band. // dragging anywhere else starts a fresh band.
@@ -52,7 +52,7 @@ Item {
root.resetSelection(); root.resetSelection();
} }
// Centred, roughly the middle half of the screen. // Centered, roughly the middle half of the screen.
function resetSelection(): void { function resetSelection(): void {
if (root.width <= 0 || root.height <= 0) if (root.width <= 0 || root.height <= 0)
return; return;
config/dot/quickshell/modules/clipboard/ClipboardPanel.qml
+4 -1
View File
@@ -20,8 +20,11 @@ PanelWindow {
top: true top: true
right: true right: true
} }
// The gap ALONE, not the bar height plus the gap -- see the note in
// QuickSettings.qml: exclusiveZone 0 already places this below the bar's
// reserved zone, so adding the bar height counted it twice.
margins { margins {
top: Theme.barHeight + Theme.barGap * 2 top: Theme.barGap * 2
right: Theme.barSideMargin right: Theme.barSideMargin
} }
config/dot/quickshell/modules/datemenu/CalendarGrid.qml
+3 -3
View File
@@ -1,11 +1,11 @@
// The month grid from GNOME's date menu. // The month grid from GNOME's date menu.
// //
// Six week rows always, so the grid height never changes as you page through // Six week rows always, so the grid height never changes as you page through
// months and the panel below it never jumps. Days belonging to the neighbouring // months and the panel below it never jumps. Days belonging to the neighboring
// months fill the edges, dimmed. Today wears the accent. // months fill the edges, dimmed. Today wears the accent.
// //
// Days become real navigation targets now that Evolution Data Server backs the // Days become real navigation targets now that Evolution Data Server backs the
// panel. Up to three source-coloured markers show whether a date has events. // panel. Up to three source-colored markers show whether a date has events.
import Quickshell import Quickshell
import QtQuick import QtQuick
@@ -134,7 +134,7 @@ Item {
} }
} }
// Centred on the row rather than between the pill and the arrows, // Centered on the row rather than between the pill and the arrows,
// so it does not shift sideways when the pill appears. // so it does not shift sideways when the pill appears.
Text { Text {
anchors.centerIn: parent anchors.centerIn: parent
config/dot/quickshell/modules/datemenu/DateMenu.qml
+8 -4
View File
@@ -1,12 +1,12 @@
// GNOME's date/time menu: calendar, ongoing activity and messages in one panel, // GNOME's date/time menu: calendar, ongoing activity and messages in one panel,
// dropping from the top centre because that is where GNOME put it and the // dropping from the top center because that is where GNOME put it and the
// muscle memory is the whole point. // muscle memory is the whole point.
// //
// A layer-shell surface rather than a PopupWindow because the inline reply // A layer-shell surface rather than a PopupWindow because the inline reply
// fields have to be typeable, and because the clock it hangs from is owned by a // fields have to be typeable, and because the clock it hangs from is owned by a
// different module. // different module.
// //
// Layer-shell centres a surface on whichever axis it is not anchored to, so // Layer-shell centers a surface on whichever axis it is not anchored to, so
// anchoring only `top` is what puts it in the middle. // anchoring only `top` is what puts it in the middle.
import QtQuick import QtQuick
@@ -28,7 +28,11 @@ PanelWindow {
color: "transparent" color: "transparent"
anchors.top: true anchors.top: true
margins.top: Theme.barHeight + Theme.barGap * 2 // The gap ALONE, not the bar height plus the gap. exclusiveZone 0 means
// "reserve nothing, but respect what others reserved", so this surface
// already begins below the bar's zone -- adding the bar height here counted
// it twice and left the surface floating 48px under the bar instead of 12.
margins.top: Theme.barGap * 2
exclusiveZone: 0 exclusiveZone: 0
implicitWidth: 760 implicitWidth: 760
@@ -87,7 +91,7 @@ PanelWindow {
} }
// Grows out of the top edge it is anchored to, rather than out of its // Grows out of the top edge it is anchored to, rather than out of its
// own centre — the panel should look like it came from the bar. // own center — the panel should look like it came from the bar.
transform: Scale { transform: Scale {
id: openScale id: openScale
origin.x: surface.width / 2 origin.x: surface.width / 2
config/dot/quickshell/modules/dock/Dock.qml
+136 -15
View File
@@ -22,10 +22,34 @@ PanelWindow {
property var modelData: null property var modelData: null
screen: root.modelData screen: root.modelData
// Which edge this dock lives on, and everything that follows from it. The
// bottom case is unchanged in every particular: same anchors, same
// geometry, same slide -- so a machine that never touches the setting sees
// exactly the dock it had.
readonly property string position: Settings.dockPosition
readonly property bool vertical: root.position === "left" || root.position === "right"
// Only on the screens asked for. An empty list means all of them, which is
// what a single-monitor machine wants and what an unplugged display should
// not be able to change.
readonly property bool onThisScreen: {
const wanted = Settings.dockScreens;
if (!wanted || wanted.length === 0)
return true;
return wanted.indexOf(String(root.screen?.name ?? "")) >= 0;
}
visible: root.onThisScreen
// A dock spans the edge it lives on, which means anchoring BOTH ends of
// that edge: bottom+left+right across the screen, or top+bottom plus one
// side down it. Anchoring only one end leaves the surface free to collapse
// to its implicit size on that axis -- a side dock came out one pixel tall.
anchors { anchors {
top: root.vertical
bottom: true bottom: true
left: true left: root.position !== "right"
right: true right: root.position !== "left"
} }
color: "transparent" color: "transparent"
@@ -42,18 +66,31 @@ PanelWindow {
// ── Geometry ──────────────────────────────────────────────────────────── // ── Geometry ────────────────────────────────────────────────────────────
// Height = room for the tooltip above the bar + the bar + the gap under it. // Height = room for the tooltip above the bar + the bar + the gap under it.
readonly property int revealStripHeight: 3 readonly property int revealStripHeight: 3
readonly property int bottomMargin: Theme.barGap readonly property int edgeMargin: Theme.barGap
readonly property int tooltipSpace: 34 readonly property int tooltipSpace: 34
implicitHeight: tooltipSpace + body.implicitHeight + bottomMargin // Only the axis the dock is thin on gets an implicit size; the other is
// spanned by the anchors above. Setting both would fight them.
implicitHeight: root.vertical ? 0 : tooltipSpace + body.implicitHeight + edgeMargin
implicitWidth: root.vertical ? tooltipSpace + body.implicitWidth + edgeMargin : 0
// ── Intellihide ───────────────────────────────────────────────────────── // ── Intellihide ─────────────────────────────────────────────────────────
// This instance's own monitor, the same lookup Workspaces.qml uses to
// scope a per-screen bar to its own screen. Falls back to null when this
// Dock is created standalone (no `screen` set) rather than via Variants.
readonly property HyprlandMonitor monitor: root.screen ? Hyprland.monitorFor(root.screen) : null
// Hyprland does not expose live toplevel geometry, so exact overlap cannot // Hyprland does not expose live toplevel geometry, so exact overlap cannot
// be computed. "Is anything on this workspace at all" is the robust proxy, // be computed. "Is anything on this workspace at all" is the robust proxy,
// and it is what Dash-to-Dock's all-windows intellihide felt like in // and it is what Dash-to-Dock's all-windows intellihide felt like in
// practice: an empty workspace keeps the dock out. // practice: an empty workspace keeps the dock out.
//
// Deliberately this instance's own monitor's active workspace, not the
// globally-focused one -- with one Dock per screen, keying off the global
// focus would make focusing an empty workspace on monitor A hide the dock
// on monitor B even though B's own workspace is still busy.
readonly property bool workspaceOccupied: { readonly property bool workspaceOccupied: {
const ws = Hyprland.focusedWorkspace; const ws = root.monitor ? root.monitor.activeWorkspace : Hyprland.focusedWorkspace;
return !!ws && ws.toplevels.values.length > 0; return !!ws && ws.toplevels.values.length > 0;
} }
@@ -83,15 +120,31 @@ PanelWindow {
onTriggered: root.revealed = false onTriggered: root.revealed = false
} }
// Other modules (the bar, the capture overlay) read this. // Other modules (the bar, the capture overlay) read this. It is one
onRevealedChanged: ShellState.dockRevealed = revealed // shared flag but there is one Dock per monitor, so only the instance on
// the currently-focused monitor is allowed to write it -- otherwise
// whichever instance last changed reveal state would stomp the others,
// and a reader would see an arbitrary monitor's value. This scopes the
// flag to mean "is the dock revealed on the monitor the user is on",
// which is what a capture overlay or the bar actually care about.
// (A true per-monitor flag would need ShellState.dockRevealed itself to
// become keyed by screen, which is out of scope here -- see the report.)
readonly property bool isFocusedMonitorInstance: root.monitor === null || root.monitor === Hyprland.focusedMonitor
onRevealedChanged: root._syncShellState()
onIsFocusedMonitorInstanceChanged: root._syncShellState()
function _syncShellState(): void {
if (root.isFocusedMonitorInstance)
ShellState.dockRevealed = root.revealed;
}
// wantRevealed's first evaluation emits no change signal when it lands on // wantRevealed's first evaluation emits no change signal when it lands on
// false (the default), so the initial state has to be taken explicitly — // false (the default), so the initial state has to be taken explicitly —
// otherwise a shell started on a busy workspace would leave the dock up. // otherwise a shell started on a busy workspace would leave the dock up.
Component.onCompleted: { Component.onCompleted: {
revealed = wantRevealed; revealed = wantRevealed;
ShellState.dockRevealed = revealed; root._syncShellState();
} }
// ── Input region ──────────────────────────────────────────────────────── // ── Input region ────────────────────────────────────────────────────────
@@ -114,22 +167,86 @@ PanelWindow {
id: pointer id: pointer
} }
// Revealed: the dock plus everything between it and the edge, so
// crossing the gap does not count as leaving. Hidden: a sliver along
// the edge the dock lives on, which is the only thing that can bring
// it back -- every other click passes through to the window beneath.
Item { Item {
id: maskItem id: maskItem
x: root.revealed ? body.x : 0
y: root.revealed ? body.y : surface.height - root.revealStripHeight x: {
width: root.revealed ? body.width : surface.width if (!root.revealed)
height: root.revealed ? surface.height - body.y : root.revealStripHeight return root.position === "right" ? surface.width - root.revealStripHeight : 0;
// A horizontal dock is centred on its edge, so the region has
// to start where the body starts -- starting at 0 puts it over
// the left of the screen while the pointer that summoned the
// dock is in the middle, and the hover drops on the very frame
// the dock arrives. A vertical dock reaches from the body out
// to its own edge, which is x 0 on the left and the body on
// the right.
if (!root.vertical)
return body.x;
return root.position === "right" ? body.x : 0;
}
y: {
if (!root.revealed)
return root.vertical ? 0 : surface.height - root.revealStripHeight;
return body.y;
}
width: {
if (!root.revealed)
return root.vertical ? root.revealStripHeight : surface.width;
return root.vertical
? (root.position === "right" ? surface.width - body.x : body.x + body.width)
: body.width;
}
height: {
if (!root.revealed)
return root.vertical ? surface.height : root.revealStripHeight;
return root.vertical ? body.height : surface.height - body.y;
}
} }
DockBody { DockBody {
id: body id: body
anchors.horizontalCenter: parent.horizontalCenter
// Slides off the bottom edge when hidden. onContextMenuRequested: (anchorItem, entry) => {
y: root.revealed ? root.tooltipSpace : surface.height dockContextMenu.anchorItem = anchorItem;
dockContextMenu.entry = entry;
dockContextMenu.visible = true;
}
vertical: root.vertical
leftSide: root.position === "left"
// Both axes are computed rather than anchored. Anchoring the centre
// on one axis and binding a position on the other looks tidier and
// is a conflict: an anchored centre owns that coordinate, so the
// binding beside it is fighting for the same value.
//
// Centred on the long axis; on the short one it sits a tooltip's
// width in from the edge when revealed, and off-screen when not.
x: {
if (!root.vertical)
return (surface.width - width) / 2;
if (root.position === "left")
return root.revealed ? root.tooltipSpace : -width;
return root.revealed ? surface.width - width - root.tooltipSpace : surface.width;
}
y: {
if (root.vertical)
return (surface.height - height) / 2;
return root.revealed ? root.tooltipSpace : surface.height;
}
opacity: root.revealed ? 1 : 0 opacity: root.revealed ? 1 : 0
Behavior on x {
NumberAnimation {
duration: root.revealed ? Theme.durDockReveal : Theme.durNormal
easing.type: root.revealed ? Easing.OutQuint : Easing.InCubic
}
}
// Asymmetric on purpose. Revealing is a response to something the // Asymmetric on purpose. Revealing is a response to something the
// user just did, so it has to feel immediate — any delay there // user just did, so it has to feel immediate — any delay there
// reads as lag. Hiding is not a response to anything, so it can // reads as lag. Hiding is not a response to anything, so it can
@@ -149,4 +266,8 @@ PanelWindow {
} }
} }
} }
DockContextMenu {
id: dockContextMenu
}
} }
config/dot/quickshell/modules/dock/DockBody.qml
+47 -15
View File
@@ -111,30 +111,52 @@ Rectangle {
inset: parent.radius inset: parent.radius
} }
implicitWidth: row.implicitWidth + Theme.dockPadding * 2 implicitWidth: strip.implicitWidth + Theme.dockPadding * 2
implicitHeight: row.implicitHeight + Theme.dockPadding * 2 implicitHeight: strip.implicitHeight + Theme.dockPadding * 2
// The item the tooltip is currently describing, or null. // The item the tooltip is currently describing, or null.
property Item hoveredItem: null property Item hoveredItem: null
signal contextMenuRequested(Item anchorItem, var entry)
Row { // Set by the Dock. A side dock runs the same strip down the screen instead
id: row // of across it.
property bool vertical: false
// Which way a tooltip points on a side dock: away from the screen edge, so
// it never opens off-screen.
property bool leftSide: true
// Explicit rather than left to Grid's wrapping. This is always one line, so
// saying how many cells it holds is both simpler to read and immune to
// Grid's default column count quietly wrapping a long dock.
readonly property int cellCount: 2 + (root.items ? root.items.length : 0)
// A Grid rather than a Row so one declaration serves both orientations.
// Row and Column would each need their own children, and the cross-axis
// anchors that centre items in a Row (verticalCenter) are the wrong axis in
// a Column -- Grid centres through its own alignment properties instead,
// which is the same result without the anchors positioners disallow.
Grid {
id: strip
anchors.centerIn: parent anchors.centerIn: parent
spacing: Theme.dockGap spacing: Theme.dockGap
rows: root.vertical ? root.cellCount : 1
columns: root.vertical ? 1 : root.cellCount
horizontalItemAlignment: Grid.AlignHCenter
verticalItemAlignment: Grid.AlignVCenter
ShowAppsButton { ShowAppsButton {
id: showApps id: showApps
anchors.verticalCenter: parent.verticalCenter
onEntered: root.hoveredItem = showApps onEntered: root.hoveredItem = showApps
onExited: if (root.hoveredItem === showApps) onExited: if (root.hoveredItem === showApps)
root.hoveredItem = null root.hoveredItem = null
} }
// Separator between the launcher and the apps, as in GNOME's dash. // Separator between the launcher and the apps, as in GNOME's dash. It
// turns with the dock: a hairline across a column, down a row.
Rectangle { Rectangle {
anchors.verticalCenter: parent.verticalCenter width: root.vertical ? Theme.dockIconSize * 0.7 : 1
width: 1 height: root.vertical ? 1 : Theme.dockIconSize * 0.7
height: Theme.dockIconSize * 0.7
border.width: 0 border.width: 0
color: Theme.alpha(Theme.fg, 0.14) color: Theme.alpha(Theme.fg, 0.14)
} }
@@ -146,10 +168,10 @@ Rectangle {
id: dockItem id: dockItem
required property var modelData required property var modelData
app: modelData app: modelData
anchors.verticalCenter: parent.verticalCenter
onEntered: root.hoveredItem = dockItem onEntered: root.hoveredItem = dockItem
onExited: if (root.hoveredItem === dockItem) onExited: if (root.hoveredItem === dockItem)
root.hoveredItem = null root.hoveredItem = null
onContextMenuRequested: root.contextMenuRequested(dockItem, dockItem.entry)
} }
} }
} }
@@ -172,16 +194,26 @@ Rectangle {
} }
} }
// Centred on the hovered item, clamped inside the dock. Reads the item's // Centred on the hovered item along the dock's own axis, and placed just
// x directly (rather than mapToItem) so the binding re-evaluates when // outside the edge it lives on. Reads the item's position directly
// the row reflows. // (rather than mapToItem) so the binding re-evaluates when the strip
// reflows.
x: { x: {
if (!root.hoveredItem) if (!root.hoveredItem)
return 0; return 0;
const centre = row.x + root.hoveredItem.x + root.hoveredItem.width / 2; if (root.vertical)
return root.leftSide ? root.width + 8 : -width - 8;
const centre = strip.x + root.hoveredItem.x + root.hoveredItem.width / 2;
return Math.max(4, Math.min(root.width - width - 4, centre - width / 2)); return Math.max(4, Math.min(root.width - width - 4, centre - width / 2));
} }
y: -height - 8 y: {
if (!root.hoveredItem)
return -height - 8;
if (!root.vertical)
return -height - 8;
const centre = strip.y + root.hoveredItem.y + root.hoveredItem.height / 2;
return Math.max(4, Math.min(root.height - height - 4, centre - height / 2));
}
width: tipLabel.implicitWidth + Theme.popoverPadding * 2 width: tipLabel.implicitWidth + Theme.popoverPadding * 2
height: tipLabel.implicitHeight + 8 height: tipLabel.implicitHeight + 8
config/dot/quickshell/modules/dock/DockContextMenu.qml
+84
View File
@@ -0,0 +1,84 @@
// The dock's app menu. Desktop-entry actions stay first; the shell-owned
// configuration route is deliberately last so it never displaces app actions.
import Quickshell
import QtQuick
import qs.config
import qs.modules.bar
import qs.services
import qs.widgets
PopupWindow {
id: root
property Item anchorItem: null
property var entry: null
anchor.item: root.anchorItem
anchor.edges: Edges.Top | Edges.Left
anchor.gravity: Edges.Top | Edges.Right
anchor.margins.bottom: 8
implicitWidth: Math.max(menu.implicitWidth + Theme.popoverPadding * 2, 240)
implicitHeight: menu.implicitHeight + Theme.popoverPadding * 2
color: "transparent"
visible: false
grabFocus: true
Rectangle {
anchors.fill: parent
radius: Theme.popoverRadius
color: Theme.alpha(Theme.bgPopover, Theme.popoverAlpha)
border.width: 1
border.color: Theme.alpha(Theme.fg, 0.08)
PrismEdge {
anchors.top: parent.top
anchors.topMargin: 1
anchors.left: parent.left
anchors.right: parent.right
inset: parent.radius
}
Column {
id: menu
anchors.fill: parent
anchors.margins: Theme.popoverPadding
spacing: 2
Repeater {
id: applicationActions
model: root.entry ? root.entry.actions : []
delegate: TrayMenuRow {
required property var modelData
width: parent.width
label: modelData.name
onActivated: {
modelData.execute();
root.visible = false;
}
}
}
Rectangle {
width: parent.width
height: 1
anchors.margins: 3
visible: applicationActions.count > 0
border.width: 0
color: Theme.alpha(Theme.fg, 0.1)
}
TrayMenuRow {
width: parent.width
label: "Dock settings"
onActivated: {
ShellState.openSettings("desktop");
root.visible = false;
}
}
}
}
}
config/dot/quickshell/modules/dock/DockItem.qml
+9 -4
View File
@@ -1,5 +1,5 @@
// One dock icon: the app, its running-window dots, hover scale and click // One dock icon: the app, its running-window dots, hover scale and click
// behaviour. Reproduces Dash-to-Dock's item: 48px icon, up to four dots // behavior. Reproduces Dash-to-Dock's item: 48px icon, up to four dots
// underneath, grow-on-hover, click to focus / cycle / launch. // underneath, grow-on-hover, click to focus / cycle / launch.
import Quickshell import Quickshell
@@ -24,6 +24,7 @@ Item {
// Emitted so DockBody can drive the single shared tooltip. // Emitted so DockBody can drive the single shared tooltip.
signal entered signal entered
signal exited signal exited
signal contextMenuRequested
// The icon may grow past the cell on hover; the cell itself stays a fixed // The icon may grow past the cell on hover; the cell itself stays a fixed
// size so the row doesn't reflow. // size so the row doesn't reflow.
@@ -72,7 +73,7 @@ Item {
} }
// Last resort for an app with no resolvable icon: an initial, which is // Last resort for an app with no resolvable icon: an initial, which is
// still recognisable, unlike the theme's broken-icon placeholder. // still recognizable, unlike the theme's broken-icon placeholder.
Rectangle { Rectangle {
anchors.fill: parent anchors.fill: parent
visible: root.iconSource === "" visible: root.iconSource === ""
@@ -115,7 +116,7 @@ Item {
id: mouse id: mouse
anchors.fill: parent anchors.fill: parent
hoverEnabled: true hoverEnabled: true
acceptedButtons: Qt.LeftButton | Qt.MiddleButton acceptedButtons: Qt.LeftButton | Qt.MiddleButton | Qt.RightButton
onEntered: root.entered() onEntered: root.entered()
onExited: root.exited() onExited: root.exited()
@@ -126,6 +127,10 @@ Item {
root.launch(); root.launch();
return; return;
} }
if (mev.button === Qt.RightButton) {
root.contextMenuRequested();
return;
}
if (root.running) if (root.running)
root.focusNext(); root.focusNext();
else else
@@ -155,7 +160,7 @@ Item {
return; return;
// Quickshell reports the address without the 0x prefix Hyprland's // Quickshell reports the address without the 0x prefix Hyprland's
// window selector expects; normalise so either form works. // window selector expects; normalize so either form works.
if (next.address) { if (next.address) {
const addr = next.address.startsWith("0x") ? next.address : "0x" + next.address; const addr = next.address.startsWith("0x") ? next.address : "0x" + next.address;
Hyprland.dispatch(`hl.dsp.focus({ window = "address:${addr}" })`); Hyprland.dispatch(`hl.dsp.focus({ window = "address:${addr}" })`);
config/dot/quickshell/modules/notifications/NotificationCard.qml
+49 -5
View File
@@ -1,7 +1,7 @@
// One notification, rendered GNOME-style: app icon, app name, summary, body, // One notification, rendered GNOME-style: app icon, app name, summary, body,
// optional image, action buttons and an inline reply box. // optional image, action buttons and an inline reply box.
// //
// Shared by the toasts and the notification centre so a notification looks the // Shared by the toasts and the notification center so a notification looks the
// same wherever you meet it. // same wherever you meet it.
// //
// IconButton/ThemedIcon come from the quicksettings module — they belong in // IconButton/ThemedIcon come from the quicksettings module — they belong in
@@ -14,6 +14,7 @@ import Quickshell.Services.Notifications
import qs.config import qs.config
import qs.services import qs.services
import qs.modules.quicksettings import qs.modules.quicksettings
import qs.modules.bar
import qs.widgets import qs.widgets
Rectangle { Rectangle {
@@ -21,7 +22,7 @@ Rectangle {
required property var notification required property var notification
// The centre renders a denser card than a toast banner. // The center renders a denser card than a toast banner.
property bool compact: false property bool compact: false
signal dismissed signal dismissed
@@ -35,7 +36,17 @@ Rectangle {
implicitHeight: Math.max(layout.implicitHeight + 24, image.visible ? 96 : 0) implicitHeight: Math.max(layout.implicitHeight + 24, image.visible ? 96 : 0)
radius: Theme.cardRadius radius: Theme.cardRadius
border.width: 0 border.width: 0
color: hover.containsMouse ? Theme.alpha(Theme.fg, 0.1) : Theme.alpha(Theme.fg, 0.06) // A real popover surface, the same one the date menu and clipboard panel
// use, rather than a 6% foreground tint.
//
// A tint that faint has nothing behind it: the toast window is transparent,
// so the card was sitting directly on whatever happened to be on screen and
// the text competed with it. Notifications are the one surface someone reads
// without having chosen to look at it, so it has to be legible over a
// bright photo and a white document alike.
color: hover.containsMouse
? Theme.alpha(Theme.mix(Theme.bgPopover, Theme.fg, 0.06), Theme.toastAlpha)
: Theme.alpha(Theme.bgPopover, Theme.toastAlpha)
Behavior on color { Behavior on color {
ColorAnimation { ColorAnimation {
@@ -43,7 +54,7 @@ Rectangle {
} }
} }
// Critical notifications get a red edge rather than a colour wash, so the // Critical notifications get a red edge rather than a color wash, so the
// text contrast never changes. // text contrast never changes.
Rectangle { Rectangle {
anchors.left: parent.left anchors.left: parent.left
@@ -117,11 +128,44 @@ Rectangle {
onClicked: root.dismissed() onClicked: root.dismissed()
} }
IconButton {
id: settingsMenuButton
anchors.right: closeButton.left
anchors.rightMargin: 2
anchors.top: parent.top
anchors.topMargin: 6
size: 24
iconSize: 14
tint: Theme.fgDim
icon: "view-more-symbolic"
iconFallback: "open-menu-symbolic"
onClicked: settingsMenu.visible = !settingsMenu.visible
}
Popover {
id: settingsMenu
anchorItem: settingsMenuButton
// A Column already measures itself from its children, and in Qt 6 both
// implicit sizes are read-only on a positioner -- assigning them makes
// the whole shell fail to load rather than just this menu.
Column {
TrayMenuRow {
id: notificationSettings
label: "Notification settings"
onActivated: {
ShellState.openSettings("notifications");
settingsMenu.visible = false;
}
}
}
}
Column { Column {
id: layout id: layout
anchors.left: appIcon.visible ? appIcon.right : parent.left anchors.left: appIcon.visible ? appIcon.right : parent.left
anchors.leftMargin: appIcon.visible ? 10 : 14 anchors.leftMargin: appIcon.visible ? 10 : 14
anchors.right: image.visible ? image.left : closeButton.left anchors.right: image.visible ? image.left : settingsMenuButton.left
anchors.rightMargin: 8 anchors.rightMargin: 8
anchors.top: parent.top anchors.top: parent.top
anchors.topMargin: 12 anchors.topMargin: 12
config/dot/quickshell/modules/notifications/NotificationCenter.qml
-219
View File
@@ -1,219 +0,0 @@
// GNOME's message tray: everything that has arrived, grouped by app.
//
// Drops from the top centre because that is where GNOME's tray lives and the
// muscle memory is the whole point. Layer-shell centres a surface on whichever
// axis it is not anchored to, so anchoring only `top` does it.
import QtQuick
import Quickshell
import Quickshell.Wayland
import Quickshell.Hyprland
import Quickshell.Widgets
import qs.config
import qs.services
import qs.modules.quicksettings
import qs.widgets
PanelWindow {
id: root
visible: ShellState.notificationsOpen
color: "transparent"
anchors.top: true
margins.top: Theme.barHeight + Theme.barGap * 2
exclusiveZone: 0
implicitWidth: 440
implicitHeight: surface.implicitHeight
WlrLayershell.namespace: "qs-popover-notifications"
WlrLayershell.layer: WlrLayer.Overlay
WlrLayershell.keyboardFocus: WlrKeyboardFocus.OnDemand
onVisibleChanged: {
if (root.visible)
Notifs.markAllRead();
}
HyprlandFocusGrab {
windows: [root]
active: root.visible
onCleared: ShellState.close()
}
Rectangle {
id: surface
anchors.fill: parent
implicitHeight: content.implicitHeight + Theme.popoverPadding * 2
radius: Theme.popoverRadius
color: Theme.alpha(Theme.bgPopover, Theme.popoverAlpha)
border.width: 1
border.color: Theme.alpha(Theme.fg, 0.08)
// The prism edge — see widgets/PrismEdge.qml. Sits just inside the 1px
// border so the two don't fight for the same row of pixels.
PrismEdge {
anchors.top: parent.top
anchors.topMargin: 1
anchors.left: parent.left
anchors.right: parent.right
inset: parent.radius
}
Item {
anchors.fill: parent
focus: true
Keys.onEscapePressed: ShellState.close()
Column {
id: content
anchors.left: parent.left
anchors.right: parent.right
anchors.top: parent.top
anchors.margins: Theme.popoverPadding
spacing: Theme.itemSpacing
// ── Header ──────────────────────────────────────────────────
Item {
width: parent.width
height: 32
Text {
anchors.left: parent.left
anchors.leftMargin: 4
anchors.verticalCenter: parent.verticalCenter
text: "Notifications"
color: Theme.fg
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeLarge
font.weight: Font.DemiBold
}
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 4
IconButton {
size: 30
iconSize: 16
icon: "notifications-disabled-symbolic"
tint: Notifs.doNotDisturb ? Theme.accent : Theme.fgDim
onClicked: Notifs.doNotDisturb = !Notifs.doNotDisturb
}
Rectangle {
width: clearLabel.implicitWidth + 20
height: 28
radius: Theme.pillRadius
border.width: 0
visible: Notifs.hasNotifications
color: clearMouse.containsMouse ? Theme.alpha(Theme.fg, 0.16) : Theme.alpha(Theme.fg, 0.08)
Behavior on color {
ColorAnimation {
duration: Theme.durFast
}
}
Text {
id: clearLabel
anchors.centerIn: parent
text: "Clear all"
color: Theme.fg
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
font.weight: Font.Medium
}
MouseArea {
id: clearMouse
anchors.fill: parent
hoverEnabled: true
cursorShape: Qt.PointingHandCursor
onClicked: Notifs.dismissAll()
}
}
}
}
// ── Empty state ─────────────────────────────────────────────
Item {
width: parent.width
height: 120
visible: !Notifs.hasNotifications
Text {
anchors.centerIn: parent
text: Notifs.doNotDisturb ? "Do Not Disturb is on" : "No notifications"
color: Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
}
}
// ── Grouped history ─────────────────────────────────────────
ScrollColumn {
width: parent.width
maxHeight: 620
spacing: Theme.itemSpacing
visible: Notifs.hasNotifications
Repeater {
model: Notifs.groups
Column {
id: group
required property var modelData
width: parent.width
spacing: 4
Item {
width: parent.width
height: 26
Text {
anchors.left: parent.left
anchors.leftMargin: 4
anchors.verticalCenter: parent.verticalCenter
text: group.modelData.app
color: Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
font.weight: Font.DemiBold
}
IconButton {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
size: 24
iconSize: 13
tint: Theme.fgDim
icon: "edit-clear-all-symbolic"
iconFallback: "window-close-symbolic"
onClicked: Notifs.dismissApp(group.modelData.app)
}
}
Repeater {
model: group.modelData.items
NotificationCard {
required property var modelData
width: group.width
compact: true
notification: modelData
onDismissed: Notifs.dismiss(modelData)
}
}
}
}
}
}
}
}
}
config/dot/quickshell/modules/notifications/Toast.qml
+13 -14
View File
@@ -1,7 +1,6 @@
// A single banner: a notification card that slides in and times itself out. // A single banner: a notification card that slides in and times itself out.
import QtQuick import QtQuick
import Quickshell.Services.Notifications
import qs.config import qs.config
import qs.services import qs.services
@@ -14,28 +13,25 @@ Item {
// into a keyboard focus request on the layer surface. // into a keyboard focus request on the layer surface.
signal replyFocusChanged(bool focused) signal replyFocusChanged(bool focused)
// Mirrors the signal above so the dismiss timer below can read it.
property bool replyFocused: false
implicitHeight: card.implicitHeight implicitHeight: card.implicitHeight
// Critical notifications stay until dismissed (the setting is 0). An app // Critical notifications stay until dismissed (the setting is 0). An app
// asking for 0 means "never expire" per the freedesktop spec; -1 means // asking for 0 means "never expire" per the freedesktop spec; -1 means
// "server decides", which is our default. // "server decides", which is our default. Shared with Notifs.qml, which
readonly property int timeoutMs: { // gives a DND-hidden transient notification the same lifetime.
if (root.notification.urgency === NotificationUrgency.Critical) readonly property int timeoutMs: Notifs.notificationTimeoutMs(root.notification)
return Settings.notificationTimeoutCriticalMs;
if (root.notification.expireTimeout === 0)
return 0;
if (root.notification.expireTimeout > 0)
return Math.round(root.notification.expireTimeout * 1000);
return Settings.notificationTimeoutMs;
}
HoverHandler { HoverHandler {
id: hover id: hover
} }
Timer { Timer {
// Hovering holds the banner open; the countdown restarts on leave. // Hovering, or actively typing a reply, holds the banner open; the
running: root.timeoutMs > 0 && !hover.hovered // countdown restarts (from the top, same as hover) once both let go.
running: root.timeoutMs > 0 && !hover.hovered && !root.replyFocused
interval: root.timeoutMs interval: root.timeoutMs
onTriggered: Notifs.dropPopup(root.notification) onTriggered: Notifs.dropPopup(root.notification)
} }
@@ -45,7 +41,10 @@ Item {
width: parent.width width: parent.width
notification: root.notification notification: root.notification
onDismissed: Notifs.dropPopup(root.notification) onDismissed: Notifs.dropPopup(root.notification)
onReplyFocusChanged: focused => root.replyFocusChanged(focused) onReplyFocusChanged: focused => {
root.replyFocused = focused;
root.replyFocusChanged(focused);
}
// Slide in from the right edge. Runs once, on creation. // Slide in from the right edge. Runs once, on creation.
NumberAnimation on x { NumberAnimation on x {
config/dot/quickshell/modules/notifications/Toasts.qml
+16 -2
View File
@@ -17,7 +17,11 @@ PanelWindow {
anchors.top: true anchors.top: true
anchors.right: true anchors.right: true
margins.top: Theme.barHeight + Theme.barGap * 2 // The gap ALONE, not the bar height plus the gap. exclusiveZone 0 means
// "reserve nothing, but respect what others reserved", so this surface
// already begins below the bar's zone -- adding the bar height here counted
// it twice and left the surface floating 48px under the bar instead of 12.
margins.top: Theme.barGap * 2
margins.right: Theme.barSideMargin margins.right: Theme.barSideMargin
exclusiveZone: 0 exclusiveZone: 0
@@ -45,7 +49,17 @@ PanelWindow {
spacing: Theme.itemSpacing spacing: Theme.itemSpacing
Repeater { Repeater {
model: Notifs.popups.slice(0, Settings.maxVisibleToasts) // Notifs.popups.slice() is a fresh array on every change (a new
// arrival, a dismissal, a sibling toast timing out). Handing that
// straight to Repeater would reset the model and rebuild every
// delegate each time, blowing away whichever toast has a reply
// field mid-typing. ScriptModel diffs by object identity
// (Notification instances are unique QObjects), so only genuinely
// added/removed notifications add/remove delegates — unrelated
// toasts, and their slide-in animations, are untouched.
model: ScriptModel {
values: Notifs.popups.slice(0, Settings.maxVisibleToasts)
}
Toast { Toast {
required property var modelData required property var modelData
config/dot/quickshell/modules/osd/Osd.qml
+19 -1
View File
@@ -34,7 +34,14 @@ PanelWindow {
implicitWidth: root.desiredWidth implicitWidth: root.desiredWidth
implicitHeight: 64 implicitHeight: 64
color: "transparent" color: "transparent"
mask: Region {} mask: Region {
item: inputMask
}
Item {
id: inputMask
anchors.fill: parent
}
WlrLayershell.namespace: "qs-popover-osd" WlrLayershell.namespace: "qs-popover-osd"
WlrLayershell.layer: WlrLayer.Overlay WlrLayershell.layer: WlrLayer.Overlay
@@ -145,6 +152,17 @@ PanelWindow {
font.weight: Font.DemiBold font.weight: Font.DemiBold
} }
} }
MouseArea {
anchors.fill: parent
acceptedButtons: Qt.RightButton
onClicked: event => {
if (event.button !== Qt.RightButton)
return;
ShellState.openSettings("accessibility");
OsdState.hide();
}
}
} }
TextMetrics { TextMetrics {
config/dot/quickshell/modules/overview/WindowThumbnail.qml
+22 -22
View File
@@ -176,34 +176,34 @@ Item {
height: aspect > 0 ? width / aspect : parent.height height: aspect > 0 ? width / aspect : parent.height
opacity: hasContent ? 1 : 0 opacity: hasContent ? 1 : 0
// The capture context isn't ready the instant the layer surface is // A ScreencopyView cannot tell us that its recording context is
// told to become visible — it needs the surface to actually map, // ready before a capture. The enclosing overview gets that
// which takes a frame or two. Calling captureFrame() before then // context only after its first rendered frame, so defer the first
// logs "no recording context is ready" and yields nothing, so // one-shot capture to that event. Retrying before then only emits
// retry a few times and then give up quietly (the caption and app // "no recording context is ready" warnings; if a capture later
// icon are still shown, so a missing thumbnail is cosmetic). // cannot produce content, the app icon remains the fallback.
property int captureAttempts: 0 property bool recordingReady: false
function tryCapture(): void { function tryCapture(): void {
captureAttempts = 0; if (shot.hasContent)
captureRetry.restart(); return;
} if (!shot.recordingReady) {
frameReady.restart();
// `shot`, not `parent`: Timer is a QtObject, so `parent` does not
// resolve to the enclosing ScreencopyView.
Timer {
id: captureRetry
interval: 80
repeat: true
running: false
onTriggered: {
if (shot.hasContent || shot.captureAttempts >= 6) {
stop();
return; return;
} }
shot.captureAttempts++;
shot.captureFrame(); shot.captureFrame();
} }
FrameAnimation {
id: frameReady
running: false
onTriggered: {
running = false;
if (shot.hasContent)
return;
shot.recordingReady = true;
shot.tryCapture();
}
} }
Component.onCompleted: tryCapture() Component.onCompleted: tryCapture()
config/dot/quickshell/modules/overview/WorkspaceCard.qml
+2 -2
View File
@@ -1,6 +1,6 @@
// One workspace in the overview: a proportional card holding live thumbnails // One workspace in the overview: a proportional card holding live thumbnails
// of its windows, labelled underneath. The focused workspace is outlined in the // of its windows, labeled underneath. The focused workspace is outlined in the
// accent colour, as GNOME outlines the current workspace. // accent color, as GNOME outlines the current workspace.
// //
// A card with a null `workspace` is the trailing "new workspace" affordance // A card with a null `workspace` is the trailing "new workspace" affordance
// that dynamic-workspace setups (GNOME's, and Hyprland's) always show. // that dynamic-workspace setups (GNOME's, and Hyprland's) always show.
config/dot/quickshell/modules/polkit/PolkitPrompt.qml
+157
View File
@@ -0,0 +1,157 @@
// The authentication prompt.
//
// Deliberately a Panama surface rather than the compositor's stock agent: this
// is the window that asks for the password to everything, and it was the one
// window on the desktop that looked like it belonged to something else.
//
// Two things here are security, not styling. It takes EXCLUSIVE keyboard focus,
// so keystrokes cannot reach the window underneath while a password is being
// typed. And the field is cleared on every exit path, including the ones nobody
// plans for.
import Quickshell
import Quickshell.Wayland
import QtQuick
import qs.config
import qs.services
import qs.modules.settings
PanelWindow {
id: root
visible: Polkit.active
color: "transparent"
anchors { top: true; bottom: true; left: true; right: true }
exclusiveZone: 0
WlrLayershell.namespace: "qs-polkit"
WlrLayershell.layer: WlrLayer.Overlay
// Exclusive, not OnDemand: a password prompt that lets keystrokes through
// to whatever is behind it is a keylogger with extra steps.
WlrLayershell.keyboardFocus: Polkit.active
? WlrKeyboardFocus.Exclusive
: WlrKeyboardFocus.None
onVisibleChanged: {
if (root.visible) {
field.text = "";
field.forceActiveFocus();
} else {
field.text = "";
}
}
// Dims what is behind, and swallows clicks so nothing outside the dialog
// can be operated while it is waiting.
Rectangle {
anchors.fill: parent
color: Theme.alpha(Theme.bgDark, Theme.overlayAlpha)
MouseArea {
anchors.fill: parent
// Clicking outside does nothing on purpose. Dismissing an
// authentication request by misclick, and having the thing that
// asked report a mysterious failure, is worse than an explicit
// Cancel.
hoverEnabled: true
}
}
Rectangle {
id: dialog
anchors.centerIn: parent
width: 420
implicitHeight: layout.implicitHeight + 44
radius: Theme.popoverRadius
color: Theme.alpha(Theme.bgPopover, Theme.popoverAlpha)
border.width: 1
border.color: Theme.alpha(Theme.fg, 0.1)
Column {
id: layout
anchors.centerIn: parent
width: parent.width - 44
spacing: 14
Text {
width: parent.width
text: "Authentication required"
color: Theme.fg
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeLarge
font.weight: Font.DemiBold
wrapMode: Text.WordWrap
}
Text {
width: parent.width
text: Polkit.message
color: Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
wrapMode: Text.WordWrap
}
Text {
width: parent.width
visible: Polkit.users.length > 1
text: "Authenticating as " + Polkit.chosenUser
color: Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
}
PasswordField {
id: field
width: parent.width
placeholder: "Password"
enabled: !Polkit.authenticating
onAccepted: {
if (field.text !== "")
Polkit.submit(field.text);
field.text = "";
}
}
Text {
width: parent.width
visible: Polkit.failureText !== ""
text: Polkit.failureText
color: Theme.danger
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WordWrap
}
Row {
anchors.right: parent.right
spacing: 8
SettingsButton {
text: "Cancel"
onClicked: Polkit.cancel()
}
SettingsButton {
text: Polkit.authenticating ? "Checking…" : "Authenticate"
tone: "accent"
enabled: !Polkit.authenticating
onClicked: {
if (field.text !== "")
Polkit.submit(field.text);
field.text = "";
}
}
}
}
}
// Escape cancels, which is what every other dialog on this desktop does.
Item {
anchors.fill: parent
focus: true
Keys.onEscapePressed: Polkit.cancel()
}
}
config/dot/quickshell/modules/polkit/qmldir
+2
View File
@@ -0,0 +1,2 @@
module qs.modules.polkit
PolkitPrompt 1.0 PolkitPrompt.qml
config/dot/quickshell/modules/quicksettings/BluetoothList.qml
+1 -1
View File
@@ -114,7 +114,7 @@ Item {
width: parent.width width: parent.width
// BlueZ reports a plain freedesktop name ("audio-headphones"); // BlueZ reports a plain freedesktop name ("audio-headphones");
// the symbolic variant is the one that can be recoloured. // the symbolic variant is the one that can be recolored.
icon: deviceRow.modelData.icon !== "" ? deviceRow.modelData.icon + "-symbolic" : "bluetooth-symbolic" icon: deviceRow.modelData.icon !== "" ? deviceRow.modelData.icon + "-symbolic" : "bluetooth-symbolic"
iconFallback: "bluetooth-symbolic" iconFallback: "bluetooth-symbolic"
label: deviceRow.modelData.name || deviceRow.modelData.address label: deviceRow.modelData.name || deviceRow.modelData.address
config/dot/quickshell/modules/quicksettings/BrightnessControl.qml
+5 -5
View File
@@ -29,7 +29,7 @@ Item {
property real backlightValue: 0 property real backlightValue: 0
readonly property int rowCount: (root.backlightAvailable ? 1 : 0) + Brightness.displays.length readonly property int rowCount: (root.backlightAvailable ? 1 : 0) + Brightness.displays.length
readonly property bool labelled: root.rowCount > 1 readonly property bool labeled: root.rowCount > 1
visible: root.rowCount > 0 visible: root.rowCount > 0
implicitHeight: rows.implicitHeight implicitHeight: rows.implicitHeight
@@ -89,7 +89,7 @@ Item {
// Hyprland already knows what each output is called, so the // Hyprland already knows what each output is called, so the
// name comes from there rather than from a second source that // name comes from there rather than from a second source that
// could disagree with the Displays page. The connector is the // could disagree with the Displays page. The connector is the
// fallback, so a display is never an unlabelled slider. // fallback, so a display is never an unlabeled slider.
label: Displays.monitorNamed(modelData.connector)?.description || modelData.connector label: Displays.monitorNamed(modelData.connector)?.description || modelData.connector
value: modelData.value / 100 value: modelData.value / 100
onMoved: v => Brightness.set(modelData.bus, Math.round(v * 100)) onMoved: v => Brightness.set(modelData.bus, Math.round(v * 100))
@@ -113,7 +113,7 @@ Item {
anchors.leftMargin: 6 anchors.leftMargin: 6
anchors.rightMargin: 6 anchors.rightMargin: 6
anchors.top: parent.top anchors.top: parent.top
visible: root.labelled visible: root.labeled
height: visible ? implicitHeight + 2 : 0 height: visible ? implicitHeight + 2 : 0
text: row.label text: row.label
color: Theme.fgDim color: Theme.fgDim
@@ -124,7 +124,7 @@ Item {
// The slider and its glyph share one strip so the two stay aligned // The slider and its glyph share one strip so the two stay aligned
// whether or not a caption sits above them. Anchoring the glyph to // whether or not a caption sits above them. Anchoring the glyph to
// both a caption and a centre line instead would conflict, and an // both a caption and a center line instead would conflict, and an
// anchor set to undefined is not released. // anchor set to undefined is not released.
Item { Item {
id: control id: control
@@ -134,7 +134,7 @@ Item {
height: 32 height: 32
// ValueSlider draws its own leading icon, but symbolic icons need // ValueSlider draws its own leading icon, but symbolic icons need
// recolouring to be visible — see ThemedIcon. // recoloring to be visible — see ThemedIcon.
ThemedIcon { ThemedIcon {
id: glyph id: glyph
anchors.left: parent.left anchors.left: parent.left
config/dot/quickshell/modules/quicksettings/HomeControls.qml
+23 -2
View File
@@ -36,9 +36,30 @@ Item {
Rectangle { Rectangle {
id: restingCard id: restingCard
// Shown when the section is closed; the expanded grid below replaces
// it when open.
readonly property bool shown: root.hasSelection && !root.expanded
width: parent.width width: parent.width
height: visible ? restingGrid.implicitHeight + 20 : 0
visible: root.hasSelection && !root.expanded // Animated, and on the same curve and duration as the Section that
// replaces it. Previously this hid the instant `expanded` flipped:
// a Column skips invisible children, so everything above snapped up
// while the expanded grid was still sliding open underneath. That
// read as a glitch rather than as an animation, and only here,
// because this is the only control with a resting and an expanded
// form that swap.
height: restingCard.shown ? restingGrid.implicitHeight + 20 : 0
visible: height > 0
clip: true
Behavior on height {
NumberAnimation {
duration: Theme.durNormal
easing.type: Easing.OutCubic
}
}
radius: Theme.cardRadius + 2 radius: Theme.cardRadius + 2
color: Theme.alpha(Theme.warn, 0.028) color: Theme.alpha(Theme.warn, 0.028)
border.width: 1 border.width: 1
config/dot/quickshell/modules/quicksettings/PowerProfileList.qml
+57
View File
@@ -0,0 +1,57 @@
// The three system power profiles, as an expandable list.
//
// A row per profile rather than a cycling button: there are three, and cycling
// through them means passing through one you did not want on a machine where
// the change is immediate and audible. The same shape the audio device lists
// use, so the panel reads consistently.
//
// The daemon owns the profile -- it survives a shell restart and anything else
// on the system can change it -- so this reads back rather than assuming, the
// same as monitor brightness.
import QtQuick
import qs.config
import qs.services
Column {
id: root
spacing: 2
Repeater {
model: PowerProfiles.profiles
RowButton {
required property var modelData
width: root.width
icon: {
switch (modelData) {
case "power-saver": return "power-profile-power-saver-symbolic";
case "performance": return "power-profile-performance-symbolic";
default: return "power-profile-balanced-symbolic";
}
}
iconFallback: "preferences-system-power-symbolic"
label: PowerProfiles.label(modelData)
sublabel: PowerProfiles.detail(modelData)
selected: modelData === PowerProfiles.active
dimmed: PowerProfiles.busy
onClicked: PowerProfiles.set(modelData)
}
}
// Only when it is true. A machine that cannot deliver the profile it is set
// to is the one case where the label alone is misleading.
Text {
visible: PowerProfiles.degraded !== ""
width: root.width
text: "Limited right now: " + PowerProfiles.degraded
color: Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WordWrap
leftPadding: 10
topPadding: 4
}
}
config/dot/quickshell/modules/quicksettings/QuickSettings.qml
+16 -1
View File
@@ -20,9 +20,21 @@ PanelWindow {
// Hangs directly beneath the top-right status cluster. Two logical pixels // Hangs directly beneath the top-right status cluster. Two logical pixels
// preserve the Prism edge without making the surface feel detached. // preserve the Prism edge without making the surface feel detached.
//
// The margin is the gap ALONE, not the bar height plus the gap. An
// exclusiveZone of 0 means "reserve nothing, but respect what others
// reserved", so this surface already begins below the bar's 36px zone;
// adding the bar height here counted it twice and left the panel floating
// 38px under the bar instead of 2px. It also means the panel follows the
// bar on its own -- if the bar ever stops reserving space, this closes up
// against the top edge rather than hanging under nothing.
anchors.top: true anchors.top: true
anchors.right: true anchors.right: true
margins.top: Theme.barHeight + Theme.controlCenterTopGap // The same gap every other popover uses. This had its own constant set to
// 2, which left the widest surface in the shell hanging ten pixels higher
// than the date menu beside it -- an early value nothing else converged on
// rather than a decision; it carried no reason, while barGap does.
margins.top: Theme.barGap * 2
margins.right: Theme.barSideMargin margins.right: Theme.barSideMargin
exclusiveZone: 0 exclusiveZone: 0
@@ -45,6 +57,9 @@ PanelWindow {
if (root.visible) { if (root.visible) {
KdeConnect.refresh(); KdeConnect.refresh();
HomeAssistant.refresh(); HomeAssistant.refresh();
// The daemon owns the power profile and anything on the system can
// change it, so the panel asks rather than trusting what it last saw.
PowerProfiles.refresh();
openAnim.restart(); openAnim.restart();
} else { } else {
panel.reset(); panel.reset();
config/dot/quickshell/modules/quicksettings/QuickSettingsPanel.qml
+102 -2
View File
@@ -107,6 +107,27 @@ Item {
onExpanded: root.expand("wifi") onExpanded: root.expand("wifi")
} }
// Only present when there is a wired device at all -- most machines
// this runs on have one, but a laptop without a dock does not, and
// an Ethernet tile there would be a control for absent hardware.
Toggle {
width: root.cellWidth
visible: Connectivity.wiredDevice !== null
icon: Connectivity.wiredOn
? "network-wired-symbolic"
: "network-wired-disconnected-symbolic"
label: "Ethernet"
active: Connectivity.wiredOn
enabled: Connectivity.wiredAvailable
sublabel: {
if (Connectivity.wiredOn)
return Connectivity.wiredDevice.linkSpeed > 0
? Connectivity.wiredDevice.linkSpeed + " Mb/s" : "Connected";
return "Off";
}
onToggled: Connectivity.setWired(!Connectivity.wiredOn)
}
Toggle { Toggle {
width: root.cellWidth width: root.cellWidth
icon: root.btAdapter && root.btAdapter.enabled ? "bluetooth-active-symbolic" : "bluetooth-disabled-symbolic" icon: root.btAdapter && root.btAdapter.enabled ? "bluetooth-active-symbolic" : "bluetooth-disabled-symbolic"
@@ -130,6 +151,21 @@ Item {
onToggled: Caffeine.toggle() onToggled: Caffeine.toggle()
} }
Toggle {
width: root.cellWidth
icon: ColorScheme.dark ? "weather-clear-night-symbolic" : "weather-clear-symbolic"
label: "Appearance"
sublabel: ColorScheme.dark ? "Dark" : "Light"
// "active" reads as the non-default state across this grid, and
// dark is what Panama ships, so light is the lit one.
active: !ColorScheme.dark
// Writes the preference and stops. ColorScheme propagates it to
// GTK, the portal, the terminals, the launcher, btop, tmux and
// the lock screen; nothing here needs to know that list.
onToggled: SystemSettings.commitPreference("colorScheme",
ColorScheme.dark ? "light" : "dark")
}
Toggle { Toggle {
width: root.cellWidth width: root.cellWidth
icon: "night-light-symbolic" icon: "night-light-symbolic"
@@ -190,6 +226,38 @@ Item {
color: Theme.alpha(Theme.fg, 0.1) color: Theme.alpha(Theme.fg, 0.1)
} }
// ── Power ───────────────────────────────────────────────────────────
// Only where a power-profiles daemon is actually running. A desktop
// without one should not show a control that cannot do anything.
RowButton {
visible: PowerProfiles.available
width: content.width
icon: {
switch (PowerProfiles.active) {
case "power-saver": return "power-profile-power-saver-symbolic";
case "performance": return "power-profile-performance-symbolic";
default: return "power-profile-balanced-symbolic";
}
}
iconFallback: "preferences-system-power-symbolic"
label: "Power profile"
sublabel: PowerProfiles.degraded !== ""
? PowerProfiles.label(PowerProfiles.active) + " · limited"
: PowerProfiles.label(PowerProfiles.active)
selected: root.expandedSection === "power"
onClicked: root.expand("power")
}
Section {
width: content.width
expanded: root.expandedSection === "power"
PowerProfileList {
anchors.left: parent.left
anchors.right: parent.right
}
}
// ── Sliders ───────────────────────────────────────────────────────── // ── Sliders ─────────────────────────────────────────────────────────
AudioSlider { AudioSlider {
width: content.width width: content.width
@@ -257,15 +325,45 @@ Item {
width: content.width width: content.width
height: 36 height: 36
ThemedIcon { // The account's own picture, the same file the lock screen and the
// login screen read. A generic glyph sat here while a real avatar
// was already set, which made the desktop look like it did not know
// whose it was.
Item {
id: avatar id: avatar
anchors.left: parent.left anchors.left: parent.left
anchors.leftMargin: 4 anchors.leftMargin: 4
anchors.verticalCenter: parent.verticalCenter anchors.verticalCenter: parent.verticalCenter
width: 22
height: 22
ClippingRectangle {
anchors.fill: parent
radius: width / 2
color: "transparent"
visible: UserAccounts.avatarUrl !== ""
Image {
anchors.fill: parent
source: UserAccounts.avatarUrl
fillMode: Image.PreserveAspectCrop
// Replaced in place when the picture changes, so the
// cache has to be told to let go of the old one.
cache: false
asynchronous: true
sourceSize.width: 44
sourceSize.height: 44
}
}
ThemedIcon {
anchors.centerIn: parent
visible: UserAccounts.avatarUrl === ""
size: 20 size: 20
icon: "avatar-default-symbolic" icon: "avatar-default-symbolic"
iconFallback: "user-info-symbolic" iconFallback: "user-info-symbolic"
} }
}
Text { Text {
anchors.left: avatar.right anchors.left: avatar.right
@@ -273,7 +371,9 @@ Item {
anchors.right: actions.left anchors.right: actions.left
anchors.rightMargin: 8 anchors.rightMargin: 8
anchors.verticalCenter: parent.verticalCenter anchors.verticalCenter: parent.verticalCenter
text: Quickshell.env("USER") || "user" text: UserAccounts.me
? UserAccounts.displayName(UserAccounts.me)
: (Quickshell.env("USER") || "user")
color: Theme.fg color: Theme.fg
elide: Text.ElideRight elide: Text.ElideRight
font.family: Theme.fontFamily font.family: Theme.fontFamily
config/dot/quickshell/modules/quicksettings/RowButton.qml
+1 -1
View File
@@ -95,7 +95,7 @@ Rectangle {
} }
} }
// Full-height rather than vertically centred so slot contents can anchor // Full-height rather than vertically centered so slot contents can anchor
// their own verticalCenter to it without a size loop. // their own verticalCenter to it without a size loop.
Row { Row {
id: trailingRow id: trailingRow
config/dot/quickshell/modules/quicksettings/WifiList.qml
+12 -1
View File
@@ -137,7 +137,18 @@ Item {
} }
Repeater { Repeater {
model: root.networks // root.networks is a fresh array on every signal-strength tick (the
// sort comparator reads signalStrength/connected/known, so any of
// those changing on ANY network recomputes the whole list). Handing
// that straight to Repeater would reset the model and rebuild every
// delegate each tick, blowing away whichever row has its password
// Section open and focused. ScriptModel diffs by object identity
// (WifiNetwork instances are unique QObjects) and turns a reorder
// into move operations, so existing delegates -- and their expanded
// state -- survive.
model: ScriptModel {
values: root.networks
}
Column { Column {
id: entry id: entry
config/dot/quickshell/modules/quicksettings/qmldir
+1
View File
@@ -17,3 +17,4 @@ RowButton 1.0 RowButton.qml
ScrollColumn 1.0 ScrollColumn.qml ScrollColumn 1.0 ScrollColumn.qml
Section 1.0 Section.qml Section 1.0 Section.qml
WifiList 1.0 WifiList.qml WifiList 1.0 WifiList.qml
PowerProfileList 1.0 PowerProfileList.qml
config/dot/quickshell/modules/settings/AccentEditor.qml
+218
View File
@@ -0,0 +1,218 @@
// Advanced accent editing remains a labelled, keyboard-operable extension of
// the named fast path. Hue is always accompanied by saturation, value, a
// numeric readout, and the two-colour preview supplied by Appearance.
import QtQuick
import Quickshell
import Quickshell.Io
import qs.config
import qs.services
import qs.widgets
import "../../services/ThemeProfileModel.js" as ThemeProfileModel
Column {
id: editor
width: parent ? parent.width : 620
spacing: 0
property string pickerTarget: "primary"
property string lastError: ""
readonly property var primaryHsv: ThemeProfileModel.hexToHsv(
ThemeProfiles.activeProfile.accent) || ({ h: 0, s: 0, v: 0 })
readonly property var secondaryHsv: ThemeProfileModel.hexToHsv(
ThemeProfiles.activeProfile.secondary) || ({ h: 0, s: 0, v: 0 })
function changeChannel(target: string, channel: string, ratio: real): void {
const source = target === "primary" ? editor.primaryHsv : editor.secondaryHsv;
const next = { h: source.h, s: source.s, v: source.v };
next[channel] = Math.round(Math.max(0, Math.min(1, ratio))
* (channel === "h" ? 360 : 100));
const changed = ThemeProfileModel.hsvToHex(next.h, next.s, next.v);
const primary = target === "primary" ? changed : ThemeProfiles.activeProfile.accent;
const secondary = target === "secondary" ? changed : ThemeProfiles.activeProfile.secondary;
ThemeProfiles.setAccentPair(primary, secondary);
}
function pick(target: string): void {
if (screenPicker.running)
return;
editor.pickerTarget = target;
editor.lastError = "";
screenPicker.exec(["hyprpicker", "--format=hex", "--lowercase-hex", "--quiet", "--no-fancy"]);
}
function acceptPicked(value: string): void {
const picked = String(value).trim().toLowerCase();
if (ThemeProfileModel.hexToHsv(picked) === null) {
editor.lastError = "The sampled colour was not valid.";
return;
}
const primary = editor.pickerTarget === "primary"
? picked : ThemeProfiles.activeProfile.accent;
const secondary = editor.pickerTarget === "secondary"
? picked : ThemeProfiles.activeProfile.secondary;
ThemeProfiles.setAccentPair(primary, secondary);
}
component HsvRow: SettingRow {
id: root
required property string target
required property string channel
required property real channelValue
required property real channelMaximum
property string suffix: "%"
controlWidth: 280
Item {
id: keyboardSlider
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
width: 270
height: 32
activeFocusOnTab: true
Accessible.role: Accessible.Slider
Accessible.name: root.label
Accessible.description: Math.round(root.channelValue) + root.suffix
+ ", range 0 to " + root.channelMaximum
Accessible.focusable: true
Accessible.focused: activeFocus
Accessible.onIncreaseAction: keyboardSlider.step(1)
Accessible.onDecreaseAction: keyboardSlider.step(-1)
function step(direction: int): void {
const increment = root.channel === "h" ? 1 : 1;
const value = Math.max(0, Math.min(root.channelMaximum,
root.channelValue + direction * increment));
editor.changeChannel(root.target, root.channel, value / root.channelMaximum);
}
Keys.onPressed: event => {
if (event.key === Qt.Key_Left || event.key === Qt.Key_Down) {
keyboardSlider.step(-1);
event.accepted = true;
} else if (event.key === Qt.Key_Right || event.key === Qt.Key_Up) {
keyboardSlider.step(1);
event.accepted = true;
} else if (event.key === Qt.Key_Home) {
editor.changeChannel(root.target, root.channel, 0);
event.accepted = true;
} else if (event.key === Qt.Key_End) {
editor.changeChannel(root.target, root.channel, 1);
event.accepted = true;
}
}
Rectangle {
anchors.left: parent.left
anchors.right: readout.left
anchors.rightMargin: 10
anchors.verticalCenter: parent.verticalCenter
height: 24
radius: 9
color: "transparent"
border.width: keyboardSlider.activeFocus ? 2 : 1
border.color: keyboardSlider.activeFocus ? Theme.accentSecondary : Theme.alpha(Theme.fg, 0.08)
ValueSlider {
anchors.fill: parent
anchors.margins: 4
value: root.channelMaximum > 0 ? root.channelValue / root.channelMaximum : 0
onMoved: ratio => editor.changeChannel(root.target, root.channel, ratio)
}
}
Text {
id: readout
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
width: 56
horizontalAlignment: Text.AlignRight
text: Math.round(root.channelValue) + root.suffix
color: Theme.fgDim
font.family: Theme.fontFamily
font.features: Theme.tabularFigures
font.pixelSize: Theme.fontSizeSmall
}
}
}
HsvRow {
target: "primary"; channel: "h"; channelValue: editor.primaryHsv.h; channelMaximum: 360
suffix: "°"; label: "Primary hue"; detail: "Colour family, measured from 0 to 360 degrees"
}
HsvRow {
target: "primary"; channel: "s"; channelValue: editor.primaryHsv.s; channelMaximum: 100
label: "Primary saturation"; detail: "Colour intensity from grey to vivid"
}
HsvRow {
target: "primary"; channel: "v"; channelValue: editor.primaryHsv.v; channelMaximum: 100
label: "Primary value"; detail: "Brightness from black to full colour"
}
HsvRow {
target: "secondary"; channel: "h"; channelValue: editor.secondaryHsv.h; channelMaximum: 360
suffix: "°"; label: "Secondary hue"; detail: "Colour family at the far end of the Prism gradient"
}
HsvRow {
target: "secondary"; channel: "s"; channelValue: editor.secondaryHsv.s; channelMaximum: 100
label: "Secondary saturation"; detail: "Colour intensity from grey to vivid"
}
HsvRow {
target: "secondary"; channel: "v"; channelValue: editor.secondaryHsv.v; channelMaximum: 100
label: "Secondary value"; detail: "Brightness from black to full colour"
}
SettingRow {
label: "Pick colour from screen"
detail: editor.lastError !== ""
? editor.lastError
: "Sample either end of the accent gradient with hyprpicker"
divider: false
controlWidth: 330
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 7
SettingsButton {
text: "Pick primary from screen"
enabled: !screenPicker.running
activeFocusOnTab: enabled
border.width: activeFocus ? 2 : 1
border.color: activeFocus ? Theme.accent : Theme.alpha(Theme.fg, 0.08)
onClicked: editor.pick("primary")
Keys.onReturnPressed: if (enabled) editor.pick("primary")
Keys.onSpacePressed: if (enabled) editor.pick("primary")
}
SettingsButton {
text: "Pick secondary from screen"
enabled: !screenPicker.running
activeFocusOnTab: enabled
border.width: activeFocus ? 2 : 1
border.color: activeFocus ? Theme.accent : Theme.alpha(Theme.fg, 0.08)
onClicked: editor.pick("secondary")
Keys.onReturnPressed: if (enabled) editor.pick("secondary")
Keys.onSpacePressed: if (enabled) editor.pick("secondary")
}
}
}
Process {
id: screenPicker
stdout: StdioCollector {
onStreamFinished: editor.acceptPicked(this.text)
}
onExited: (exitCode, exitStatus) => {
if (exitCode !== 0)
editor.lastError = "Screen colour picking was cancelled or unavailable.";
}
}
}
config/dot/quickshell/modules/settings/AccentPicker.qml
+122
View File
@@ -0,0 +1,122 @@
// Choosing the desktop accent.
//
// Each swatch is drawn as the GRADIENT it will actually produce, not a flat
// dot, because the gradient is the thing being chosen -- the focused window
// border, the bar hairline and every active state are the two colors meeting.
// A row of flat circles would misrepresent all of them.
//
// Named accents rather than a color wheel: each name carries a curated pair
// per scheme, so every choice stays legible in both light and dark. See
// config/Theme.qml for the palette and the reasoning.
import QtQuick
import qs.config
import qs.services
Flow {
id: root
spacing: 10
readonly property string current: ThemeProfiles.activeAccentName
// The schema's own option list, not Theme.accents directly -- two lists
// hand-kept in sync is how they drift. This is the same pattern
// ChoiceRow.qml uses for every other enum row.
readonly property var spec: PreferenceSchema.spec("accentName")
readonly property var options: root.spec && root.spec.options ? root.spec.options : []
Repeater {
// The schema's option order is the palette's order, so blue is first
// because it is what Panama ships.
model: root.options
Column {
id: entry
required property var modelData
readonly property string name: entry.modelData.value
readonly property var pair: Theme.accents[entry.name]
readonly property bool selected: entry.name === root.current
readonly property color start: Theme.dark ? entry.pair.dark : entry.pair.light
readonly property color end: Theme.dark ? entry.pair.darkSecondary : entry.pair.lightSecondary
spacing: 5
// The hit target is the whole swatch+label unit, not just the
// 46px circle: the label exists specifically so someone with a
// color vision deficiency can identify an accent without it, and
// a label that cannot itself be tapped defeats that.
HoverHandler {
cursorShape: Qt.PointingHandCursor
}
TapHandler {
onTapped: {
if (!SystemSettings.commitPreference("accentName", entry.name))
console.warn("AccentPicker: commitPreference rejected accent", entry.name);
}
}
Rectangle {
id: swatch
width: 46
height: 46
radius: 23
anchors.horizontalCenter: parent.horizontalCenter
color: "transparent"
// The ring sits outside the gradient rather than over it, so a
// selected swatch still shows its true colors.
border.width: swatch.activeFocus || entry.selected ? 2 : 1
border.color: swatch.activeFocus
? Theme.accentSecondary
: (entry.selected ? Theme.fg : Theme.alpha(Theme.fg, 0.14))
activeFocusOnTab: true
Accessible.role: Accessible.Button
Accessible.name: entry.pair.label + " accent"
Accessible.description: String(entry.start) + " to " + String(entry.end)
Accessible.focusable: true
Accessible.focused: activeFocus
function choose(): void {
if (!ThemeProfiles.useCuratedAccent(entry.modelData))
console.warn("AccentPicker: accent was rejected", entry.modelData);
}
Keys.onReturnPressed: swatch.choose()
Keys.onSpacePressed: swatch.choose()
Rectangle {
anchors.fill: parent
anchors.margins: entry.selected ? 4 : 3
radius: width / 2
border.width: 0
gradient: Gradient {
orientation: Gradient.Horizontal
GradientStop { position: 0.0; color: entry.start }
GradientStop { position: 1.0; color: entry.end }
}
}
HoverHandler { cursorShape: Qt.PointingHandCursor }
TapHandler { onTapped: swatch.choose() }
}
// Always shown, not a tooltip. Telling swatches apart by color is
// exactly what someone with a color vision deficiency cannot do,
// and it is the reason the palette is named rather than freeform --
// hiding the names behind a hover would waste that.
Text {
anchors.horizontalCenter: parent.horizontalCenter
text: entry.modelData.label
color: entry.selected ? Theme.fg : Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
font.weight: entry.selected ? Font.DemiBold : Font.Normal
}
}
}
}
config/dot/quickshell/modules/settings/AccessibilityPage.qml
+6 -1
View File
@@ -27,7 +27,12 @@ SettingsPage {
title: "Text" title: "Text"
subtitle: "Scales text in applications. The shell's own panels are drawn at their design size, so they are unaffected." subtitle: "Scales text in applications. The shell's own panels are drawn at their design size, so they are unaffected."
SliderRow { setting: "textScale"; divider: false } SliderRow { setting: "textScale" }
// Reaches GTK4 applications through the desktop portal, which
// republishes it as org.freedesktop.appearance contrast. No
// high-contrast theme is involved, and none is installed here -- older
// GTK3 applications will not change.
ToggleRow { setting: "highContrast"; divider: false }
} }
SettingsCard { SettingsCard {
config/dot/quickshell/modules/settings/AppearancePage.qml
+56 -4
View File
@@ -19,6 +19,19 @@ SettingsPage {
property string expandedPicker: "" property string expandedPicker: ""
// Which group of cards is on screen. Theme leads deliberately: light and
// dark is the control reached most often, and it used to be the third
// section down, below a wallpaper grid and the whole lock screen.
property string tab: "theme"
// Arriving from another page that named a section opens on it. Taken once
// rather than bound, so the tabs still work normally afterwards.
Component.onCompleted: {
const section = ShellState.takeSettingsSection();
if (section !== "")
root.tab = section;
}
title: "Appearance" title: "Appearance"
lede: "Tune the Prism shell and the applications that live inside it. The preview above is your real geometry, to scale." lede: "Tune the Prism shell and the applications that live inside it. The preview above is your real geometry, to scale."
@@ -44,11 +57,26 @@ SettingsPage {
} }
} }
SettingsTabs {
tabs: [
{ value: "theme", label: "Theme" },
{ value: "background", label: "Background" },
{ value: "type", label: "Typography" },
{ value: "windows", label: "Windows" },
{ value: "shell", label: "Shell" },
]
current: root.tab
onSelected: value => root.tab = value
}
SettingsCard { SettingsCard {
visible: root.tab === "background"
title: "Background" title: "Background"
subtitle: Wallpaper.lastError !== "" subtitle: Wallpaper.lastError !== ""
? Wallpaper.lastError ? Wallpaper.lastError
: "Applied to every display. Looked for in ~/Pictures/Wallpapers, ~/Pictures/Backgrounds, ~/.local/share/backgrounds, and /usr/share/backgrounds." : "Applied to every display, from the folder below."
TextEntryRow { setting: "wallpaperDir"; placeholder: "Pictures/Wallpapers" }
WallpaperControls { WallpaperControls {
id: wallpaperControls id: wallpaperControls
@@ -83,6 +111,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "background"
title: "Lock screen" title: "Lock screen"
subtitle: LockScreen.lastError !== "" subtitle: LockScreen.lastError !== ""
? LockScreen.lastError ? LockScreen.lastError
@@ -101,15 +130,31 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
title: "Colour scheme" visible: root.tab === "theme"
// Not "Color scheme" any more: the card holds the saved themes as well
// as the scheme, and a theme carries both ends of the accent with it.
title: "Theme"
subtitle: ColorScheme.lastError !== "" subtitle: ColorScheme.lastError !== ""
? ColorScheme.lastError ? ColorScheme.lastError
: "Light is Tokyo Night Day, the official light variant — the same hues at a different lightness, so the blue-into-orchid signature survives the switch. Applications and window borders follow." : "Start with Moon, Moon Rose, or Day; saved themes capture the scheme and both ends of the Prism accent."
ChoiceRow { setting: "colorScheme"; divider: false } ThemeProfilePicker {
width: parent.width
}
// Drawn as the gradient each accent produces rather than a flat dot,
// because the gradient is what is being chosen.
AccentPicker {
width: parent.width
}
AccentEditor {
width: parent.width
}
} }
SettingsCard { SettingsCard {
visible: root.tab === "type"
title: "Shell typography" title: "Shell typography"
subtitle: Fonts.lastError !== "" subtitle: Fonts.lastError !== ""
? Fonts.lastError ? Fonts.lastError
@@ -151,6 +196,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "type"
title: "Application typography" title: "Application typography"
subtitle: DesktopStyle.lastError !== "" subtitle: DesktopStyle.lastError !== ""
? DesktopStyle.lastError ? DesktopStyle.lastError
@@ -223,6 +269,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "type"
title: "Icons & pointer" title: "Icons & pointer"
subtitle: DesktopStyle.lastError !== "" subtitle: DesktopStyle.lastError !== ""
? DesktopStyle.lastError ? DesktopStyle.lastError
@@ -273,6 +320,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "windows"
title: "Titlebars" title: "Titlebars"
subtitle: "For applications that draw GNOME-compatible titlebars. Hyprland itself does not add titlebar buttons to tiled windows." subtitle: "For applications that draw GNOME-compatible titlebars. Hyprland itself does not add titlebar buttons to tiled windows."
@@ -282,6 +330,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "windows"
title: "Windows" title: "Windows"
subtitle: "Spacing and shape of tiled windows. Each change is applied to the compositor and confirmed before it is saved." subtitle: "Spacing and shape of tiled windows. Each change is applied to the compositor and confirmed before it is saved."
@@ -296,6 +345,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "theme"
title: "Effects" title: "Effects"
subtitle: "Each of these costs frame time. Turning one off is a legitimate way to buy it back while gaming." subtitle: "Each of these costs frame time. Turning one off is a legitimate way to buy it back while gaming."
@@ -312,6 +362,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "shell"
title: "Clock" title: "Clock"
ToggleRow { setting: "use24Hour" } ToggleRow { setting: "use24Hour" }
@@ -320,6 +371,7 @@ SettingsPage {
} }
SettingsCard { SettingsCard {
visible: root.tab === "shell"
title: "System vitals" title: "System vitals"
subtitle: "Choose what appears beside the workspace indicator." subtitle: "Choose what appears beside the workspace indicator."
config/dot/quickshell/modules/settings/ApplicationsPage.qml
+106 -15
View File
@@ -13,15 +13,26 @@ SettingsPage {
property string expandedRole: "" property string expandedRole: ""
property bool addingAutostart: false property bool addingAutostart: false
// Which entry has been asked to be removed. Removal deletes a file, so
// it never happens on a first press.
property string confirmingAutostartRemoval: ""
readonly property var applications: DesktopEntries.applications.values readonly property var applications: DesktopEntries.applications.values
// Each role governs a whole family of types, not one representative: setting
// "Images" writes PNG, JPEG, WebP and the rest together, so a file manager
// can never open one image in a viewer and its neighbour in an editor.
// The detail line names the family the way someone would describe it.
readonly property var roles: [ readonly property var roles: [
{ key: "browser", label: "Browser", detail: "Web links and HTML pages", categorySets: [["webbrowser"]], terms: ["web browser", "browser"] }, { key: "browser", label: "Browser", detail: "Web links and HTML pages", categorySets: [["webbrowser"]], terms: ["web browser", "browser"] },
{ key: "mail", label: "Mail", detail: "Email links", categorySets: [["email"]], terms: ["mail client", "email client"] }, { key: "mail", label: "Mail", detail: "Email links", categorySets: [["email"]], terms: ["mail client", "email client"] },
{ key: "files", label: "Files", detail: "Folders and file locations", categorySets: [["filemanager"]], terms: ["file manager"] }, { key: "files", label: "Files", detail: "Folders and file locations", categorySets: [["filemanager"]], terms: ["file manager"] },
{ key: "terminal", label: "Terminal", detail: "Terminal links and command-line handoffs", categorySets: [["terminalemulator"]], terms: ["terminal emulator", "terminal"] }, { key: "terminal", label: "Terminal", detail: "Terminal links and command-line handoffs", categorySets: [["terminalemulator"]], terms: ["terminal emulator", "terminal"] },
{ key: "music", label: "Music", detail: "MP3 audio", categorySets: [["music"], ["audio", "player"]], terms: ["music player", "audio player"] }, { key: "images", label: "Images", detail: "PNG, JPEG, GIF, WebP, SVG and other pictures", categorySets: [], terms: ["image viewer", "image editor", "photo viewer", "photo editor", "picture viewer"] },
{ key: "images", label: "Images", detail: "PNG images", categorySets: [], terms: ["image viewer", "image editor", "photo viewer", "photo editor", "picture viewer"] }, { key: "music", label: "Music", detail: "MP3, FLAC, Ogg and other audio", categorySets: [["music"], ["audio", "player"]], terms: ["music player", "audio player"] },
{ key: "video", label: "Video", detail: "MP4 video", categorySets: [["video"]], terms: ["video player", "movie player"] } { key: "video", label: "Video", detail: "MP4, MKV, WebM and other video", categorySets: [["video"]], terms: ["video player", "movie player"] },
{ key: "documents", label: "Documents", detail: "PDF and EPUB documents", categorySets: [["office", "viewer"]], terms: ["document viewer", "pdf viewer", "ebook", "e-book"] },
{ key: "text", label: "Text", detail: "Plain text, Markdown, and source files", categorySets: [["texteditor"]], terms: ["text editor", "code editor"] },
{ key: "archives", label: "Archives", detail: "Zip, tar, and other archives", categorySets: [["archiving"], ["filemanager"]], terms: ["archive manager", "file roller", "file manager"] }
] ]
function desktopId(entry: var): string { function desktopId(entry: var): string {
@@ -43,17 +54,27 @@ SettingsPage {
} }
function matchesRole(entry: var, role: var): bool { function matchesRole(entry: var, role: var): bool {
const rawCategories = Array.isArray(entry.categories) // DesktopEntries hands back a QML list, not a JavaScript array, so
? entry.categories // Array.isArray is false for it. The old code took that as "this is a
: [String(entry.categories ?? "")]; // string", stringified the list into "Network,WebBrowser" and then split
// on ";" only -- producing the single token "network,webbrowser", which
// matches no category at all.
//
// Nothing failed loudly. Browsers still appeared because their generic
// name contains "web browser", so the terms fallback carried the role
// by itself. Archives matched NOTHING, which meant that row could only
// ever offer the application it already had.
//
// Joining first and splitting on both separators handles the list form
// and a plain string equally.
const raw = entry.categories;
const joined = Array.isArray(raw) ? raw.join(";") : String(raw ?? "");
const categories = []; const categories = [];
for (const rawCategory of rawCategories) { for (const value of joined.split(/[;,]/)) {
for (const value of String(rawCategory).split(";")) {
const category = value.trim().toLowerCase(); const category = value.trim().toLowerCase();
if (category !== "") if (category !== "")
categories.push(category); categories.push(category);
} }
}
const metadata = [entry.name, entry.genericName] const metadata = [entry.name, entry.genericName]
.map(value => String(value ?? "").toLowerCase()) .map(value => String(value ?? "").toLowerCase())
.join(" "); .join(" ");
@@ -95,14 +116,46 @@ SettingsPage {
width: parent.width width: parent.width
SettingRow { SettingRow {
id: roleRow
readonly property bool open: root.expandedRole === roleBlock.modelData.key
label: roleBlock.modelData.label label: roleBlock.modelData.label
detail: roleBlock.modelData.detail detail: roleBlock.modelData.detail
value: DefaultApps.busy ? "Loading…" : ( activatable: roleBlock.choices.length > 0 && !DefaultApps.busy
controlWidth: 210
// Drawn rather than left to SettingRow's plain value text, so
// the row carries the same chevron a PickerRow does. These
// open a chooser but looked completely inert without it.
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 9
Text {
anchors.verticalCenter: parent.verticalCenter
text: DefaultApps.busy ? "Loading…" : (
roleBlock.selectedEntry roleBlock.selectedEntry
? root.displayName(roleBlock.selectedEntry) ? root.displayName(roleBlock.selectedEntry)
: (root.currentHandler(roleBlock.modelData.key) || "Not set") : (root.currentHandler(roleBlock.modelData.key) || "Not set")
) )
activatable: roleBlock.choices.length > 0 && !DefaultApps.busy color: Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
elide: Text.ElideRight
}
Text {
anchors.verticalCenter: parent.verticalCenter
visible: roleBlock.choices.length > 0
text: roleRow.open ? "\u25B4" : "\u25BE"
color: Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
}
}
divider: root.expandedRole !== roleBlock.modelData.key && roleBlock.index < root.roles.length - 1 divider: root.expandedRole !== roleBlock.modelData.key && roleBlock.index < root.roles.length - 1
onActivated: { onActivated: {
root.expandedRole = root.expandedRole === roleBlock.modelData.key root.expandedRole = root.expandedRole === roleBlock.modelData.key
@@ -219,12 +272,50 @@ SettingsPage {
required property var modelData required property var modelData
required property int index required property int index
readonly property bool confirming:
root.confirmingAutostartRemoval === String(autostartRow.modelData.id)
label: autostartRow.modelData.name label: autostartRow.modelData.name
detail: autostartRow.modelData.id detail: autostartRow.confirming
value: autostartRow.modelData.enabled ? "Enabled" : "Disabled" ? "Removing deletes this entry. Turning it off instead is reversible."
activatable: !DefaultApps.busy : autostartRow.modelData.id
divider: autostartRow.index < DefaultApps.autostartEntries.length - 1 divider: autostartRow.index < DefaultApps.autostartEntries.length - 1
onActivated: DefaultApps.setAutostart(autostartRow.modelData.id, !autostartRow.modelData.enabled) controlWidth: 210
// A switch, not the words "Enabled"/"Disabled". The row always
// toggled on click, but read as static text, so a control that
// worked looked like a status nobody could change.
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 9
SettingsButton {
anchors.verticalCenter: parent.verticalCenter
visible: autostartRow.confirming
text: "Remove it"
tone: "danger"
enabled: !DefaultApps.busy
onClicked: {
root.confirmingAutostartRemoval = "";
DefaultApps.removeAutostart(String(autostartRow.modelData.id));
}
}
SettingsButton {
anchors.verticalCenter: parent.verticalCenter
text: autostartRow.confirming ? "Keep" : "Remove…"
enabled: !DefaultApps.busy
onClicked: root.confirmingAutostartRemoval =
autostartRow.confirming ? "" : String(autostartRow.modelData.id)
}
SettingsToggle {
anchors.verticalCenter: parent.verticalCenter
checked: autostartRow.modelData.enabled
onToggled: value => DefaultApps.setAutostart(autostartRow.modelData.id, value)
}
}
} }
} }
} }
config/dot/quickshell/modules/settings/AvatarCropper.qml
+231
View File
@@ -0,0 +1,231 @@
// Choosing which part of a picture becomes the profile picture.
//
// Without this, whatever was picked went to accountsservice whole, and a
// landscape photograph became a squashed thumbnail with the subject off the
// edge. The circle is drawn where the avatar is actually round elsewhere in the
// shell, so what is framed here is what appears there.
//
// The crop is reported in the picture's OWN pixels, not screen ones, so the
// result does not depend on the size this happened to be displayed at.
import QtQuick
import qs.config
Item {
id: root
// Absolute path of the picture being framed.
property string source: ""
// Side of the square viewport, in screen pixels.
readonly property int viewport: 260
// How far in the picture is zoomed, as a multiple of the smallest scale
// that still covers the viewport. 1 means "just covers".
property real zoom: 1
readonly property real maxZoom: 4
// Top-left of the drawn picture, relative to the viewport's top-left.
property real offsetX: 0
property real offsetY: 0
readonly property bool ready: picture.status === Image.Ready
&& picture.sourceSize.width > 0 && picture.sourceSize.height > 0
// The scale at which the shorter side exactly fills the viewport. Any
// smaller and the square would include area the picture does not cover.
readonly property real baseScale: root.ready
? root.viewport / Math.min(picture.sourceSize.width, picture.sourceSize.height)
: 1
readonly property real scale: root.baseScale * root.zoom
readonly property real drawnWidth: root.ready ? picture.sourceSize.width * root.scale : 0
readonly property real drawnHeight: root.ready ? picture.sourceSize.height * root.scale : 0
// Emitted with a square in the picture's own pixel coordinates.
signal cropped(int x, int y, int size)
signal cancelled
implicitWidth: parent ? parent.width : 620
implicitHeight: column.implicitHeight
// Keeps the viewport covered: the picture may never be dragged far enough
// to expose an edge, so the crop is always entirely inside the image.
function clamp(): void {
root.offsetX = Math.min(0, Math.max(root.viewport - root.drawnWidth, root.offsetX));
root.offsetY = Math.min(0, Math.max(root.viewport - root.drawnHeight, root.offsetY));
}
// Start centred, filling the viewport.
function reset(): void {
root.zoom = 1;
root.offsetX = (root.viewport - root.drawnWidth) / 2;
root.offsetY = (root.viewport - root.drawnHeight) / 2;
}
onReadyChanged: if (root.ready) root.reset()
onZoomChanged: root.clamp()
Column {
id: column
width: parent.width
spacing: 14
Row {
spacing: 20
Rectangle {
id: frame
width: root.viewport
height: root.viewport
radius: 12
clip: true
color: Theme.bgDark
border.width: 1
border.color: Theme.alpha(Theme.fg, 0.09)
Image {
id: picture
source: root.source === "" ? "" : "file://" + root.source
x: root.offsetX
y: root.offsetY
width: root.drawnWidth
height: root.drawnHeight
fillMode: Image.Stretch
asynchronous: true
// The picture is drawn at whatever size the frame needs, so
// decoding it at full resolution wastes memory on a photo.
sourceSize.width: 1600
sourceSize.height: 1600
smooth: true
}
// The round mask: a dimming fill with the circle punched out of
// it, then the ring drawn on top. Painted once per change, not
// continuously.
Canvas {
id: mask
anchors.fill: parent
onPaint: {
const context = mask.getContext("2d");
context.clearRect(0, 0, mask.width, mask.height);
context.fillStyle = Qt.rgba(0.12, 0.13, 0.19, 0.62);
context.fillRect(0, 0, mask.width, mask.height);
context.globalCompositeOperation = "destination-out";
context.beginPath();
context.arc(mask.width / 2, mask.height / 2,
mask.width / 2 - 8, 0, Math.PI * 2);
context.fill();
context.globalCompositeOperation = "source-over";
context.strokeStyle = Qt.rgba(0.78, 0.83, 0.96, 0.85);
context.lineWidth = 2;
context.beginPath();
context.arc(mask.width / 2, mask.height / 2,
mask.width / 2 - 8, 0, Math.PI * 2);
context.stroke();
}
}
// The offset is tracked from where the press started rather than
// accumulated per frame, which would drift.
MouseArea {
anchors.fill: parent
enabled: root.ready
cursorShape: Qt.OpenHandCursor
property real pressX: 0
property real pressY: 0
property real originX: 0
property real originY: 0
onPressed: mouse => {
pressX = mouse.x; pressY = mouse.y;
originX = root.offsetX; originY = root.offsetY;
}
onPositionChanged: mouse => {
if (!pressed)
return;
root.offsetX = originX + (mouse.x - pressX);
root.offsetY = originY + (mouse.y - pressY);
root.clamp();
}
onWheel: wheel => {
const before = root.scale;
root.zoom = Math.max(1, Math.min(root.maxZoom,
root.zoom * (wheel.angleDelta.y > 0 ? 1.1 : 1 / 1.1)));
// Keep the centre of the frame pointing at the same part
// of the picture, so zooming does not walk the subject
// out of the circle.
const ratio = root.scale / before;
root.offsetX = root.viewport / 2 - (root.viewport / 2 - root.offsetX) * ratio;
root.offsetY = root.viewport / 2 - (root.viewport / 2 - root.offsetY) * ratio;
root.clamp();
}
}
}
Column {
width: column.width - frame.width - 20
spacing: 12
Text {
width: parent.width
text: root.ready
? "Drag to reposition, scroll to zoom."
: (root.source === "" ? "" : "Opening the picture…")
color: Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSize
wrapMode: Text.WordWrap
}
Text {
width: parent.width
visible: root.ready
text: "The circle is what other people see. Written out at 512 × 512."
color: Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WordWrap
}
Text {
width: parent.width
visible: picture.status === Image.Error
text: "That file could not be opened as a picture."
color: Theme.danger
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WordWrap
}
Row {
spacing: 8
SettingsButton {
text: "Set picture"
tone: "accent"
enabled: root.ready
onClicked: {
// Screen coordinates back into the picture's own.
const size = root.viewport / root.scale;
root.cropped(Math.round(-root.offsetX / root.scale),
Math.round(-root.offsetY / root.scale),
Math.round(size));
}
}
SettingsButton {
text: "Reset"
enabled: root.ready
onClicked: root.reset()
}
SettingsButton {
text: "Cancel"
onClicked: root.cancelled()
}
}
}
}
}
}
config/dot/quickshell/modules/settings/AvatarPicker.qml
+32
View File
@@ -0,0 +1,32 @@
// Choosing a profile picture.
//
// A thin wrapper on the same FileDialog the phone controls use, so picking a
// picture is the ordinary file chooser rather than something this desktop
// invented. Nothing privileged happens here -- reading a file the user selected
// needs no authorization; only setting it on the account does.
import QtQuick
import QtQuick.Dialogs
Item {
id: root
signal picked(path: string)
function open(): void {
dialog.open();
}
FileDialog {
id: dialog
title: "Choose a profile picture"
fileMode: FileDialog.OpenFile
nameFilters: ["Pictures (*.png *.jpg *.jpeg *.webp *.gif *.bmp)", "All files (*)"]
onAccepted: {
const value = String(dialog.selectedFile);
if (!value.startsWith("file://"))
return;
root.picked(decodeURIComponent(value.slice(7)));
}
}
}
config/dot/quickshell/modules/settings/ConnectivityPage.qml
+22 -15
View File
@@ -37,11 +37,27 @@ SettingsPage {
title: "Wired" title: "Wired"
visible: Connectivity.wiredDevice !== null visible: Connectivity.wiredDevice !== null
TextRow { SwitchRow {
label: "Ethernet" label: "Ethernet"
detail: Connectivity.wiredDevice ? Connectivity.wiredDevice.name : "" // Three states worth telling apart: on, off but plugged in, and
value: Connectivity.wiredDevice && Connectivity.wiredDevice.connected ? "Connected" : "Not connected" // nothing in the socket. "Not connected" covered all three and
// explained none of them.
detail: {
const device = Connectivity.wiredDevice;
if (!device)
return "";
if (device.connected)
return device.name + (device.linkSpeed > 0
? " · " + device.linkSpeed + " Mb/s" : "");
// Not "no cable": that cannot be told apart from "switched off"
// by anything reliable here, and guessing produced a switch
// that blamed the hardware for what it had just done itself.
return device.name + " · off";
}
checked: Connectivity.wiredOn
enabled: Connectivity.wiredAvailable
divider: false divider: false
onToggled: value => Connectivity.setWired(value)
} }
} }
@@ -169,24 +185,15 @@ SettingsPage {
SettingsCard { SettingsCard {
title: "Owned by Fedora" title: "Owned by Fedora"
subtitle: "VPNs, per-connection routing, printers, and online accounts are configured by GNOME's panels, which are installed and searchable." subtitle: "VPNs and per-connection routing are still configured by GNOME's panel, which is installed and searchable. Printers and online accounts have their own pages here."
ActionRow { ActionRow {
label: "Network connections" label: "Network connections"
detail: "VPN, proxies, and per-connection settings" detail: "VPN, proxies, and per-connection settings"
action: "Open" action: "Open"
divider: false
onTriggered: SystemSettings.openGnomePanel("network") onTriggered: SystemSettings.openGnomePanel("network")
} }
ActionRow {
label: "Printers"
action: "Open"
onTriggered: SystemSettings.openGnomePanel("printers")
}
ActionRow {
label: "Online accounts"
action: "Open"
divider: false
onTriggered: SystemSettings.openGnomePanel("online-accounts")
}
} }
} }
config/dot/quickshell/modules/settings/ContainersPage.qml
+558
View File
@@ -0,0 +1,558 @@
// Rootless podman-compose stacks, led by what needs attention.
//
// The grouping is the compose project, because that is the unit a person thinks
// in: not "thirteen containers" but "the Command Center database" and "the
// capacity planner's Supabase". State decides prominence within that grouping --
// what is running gets rows, what is stopped collapses to a line -- so neither
// axis has to be chosen over the other.
//
// The findings at the top are the same crossing the Firewall page reports, seen
// from the side that can close it: the firewall knows only that something is
// listening, while this page knows which container, which compose file, and
// which token is missing from it.
import Quickshell
import QtQuick
import qs.config
import qs.services
Item {
id: root
objectName: "containers"
// "images", "volumes", or empty. Removal never happens on a first press.
property string confirmingPrune: ""
// Projects whose stopped containers have been expanded, by project name.
property var expanded: []
function isExpanded(name: string): bool { return root.expanded.indexOf(name) >= 0; }
function toggleExpanded(name: string): void {
root.expanded = root.isExpanded(name)
? root.expanded.filter(entry => entry !== name)
: root.expanded.concat([name]);
}
function uptimeOf(container: var): string {
const status = String(container.status ?? "");
// podman already phrases this well ("Up 32 hours (healthy)"); the health
// is shown separately, so only the duration is wanted here.
const match = /^Up ([^(]+)/.exec(status);
return match ? match[1].trim() : "";
}
function portSummary(container: var): string {
const ports = container.ports ?? [];
if (ports.length === 0)
return "no published ports";
return ports.map(port => {
const host = String(port.hostIp ?? "");
const where = host === "" ? "every interface" : host;
return where + ":" + port.hostPort + " → " + port.containerPort;
}).join(", ");
}
Component.onCompleted: Containers.refresh()
// ── the list ────────────────────────────────────────────────────────────
SettingsPage {
anchors.fill: parent
visible: Containers.logTarget === ""
title: "Containers"
lede: "Local services you run for development — what they expose, and what they cost."
TextRow {
visible: Containers.lastError !== ""
label: "That did not work"
detail: Containers.lastError
value: ""
divider: false
}
TextRow {
visible: Containers.scanned && !Containers.available
label: "podman is not available"
detail: "Nothing here can be shown until podman is installed."
value: ""
divider: false
}
// ── finding: published to the network ───────────────────────────────
SettingsCard {
visible: Containers.reachable.length > 0
title: Containers.reachable.length === 1
? "A container is published to your whole network"
: "Containers are published to your whole network"
subtitle: "These bind every interface, so any machine on your network can connect. "
+ "For a development database, loopback is almost always what you want. "
+ "Binding adds an address to the compose file and changes nothing else."
Repeater {
model: Containers.reachable
delegate: SettingRow {
required property var modelData
width: parent.width
label: String(modelData.container ?? "")
detail: "Port " + modelData.hostPort + "/" + String(modelData.protocol ?? "tcp")
+ " · " + String(modelData.image ?? "")
+ (modelData.configFile
? "\n" + Containers.shorten(String(modelData.configFile))
: "\nNo compose file is recorded for this container, so it cannot be bound from here.")
controlWidth: 250
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: "Open compose file"
visible: String(modelData.configFile ?? "") !== ""
enabled: !Containers.busy
onClicked: Containers.openFile(String(modelData.configFile))
}
SettingsButton {
text: "Bind to localhost"
tone: "accent"
// Needs both halves of the label to find the entry in
// the compose file; the Supabase CLI records neither.
visible: String(modelData.configFile ?? "") !== ""
&& String(modelData.service ?? "") !== ""
enabled: !Containers.busy
onClicked: Containers.bindLocal(
String(modelData.project), String(modelData.service))
}
}
}
}
TextRow {
visible: Containers.reachable.length > 0
label: "After binding"
detail: "The change takes effect the next time the stack comes up, because a "
+ "published port is fixed when the container is created."
value: ""
divider: false
}
}
// ── finding: disk nothing references ────────────────────────────────
SettingsCard {
visible: Containers.unusedImages.length > 0 || Containers.unusedVolumes.length > 0
title: Containers.formatBytes(Containers.reclaimable) + " nothing is using"
subtitle: "Images and volumes no container references. Removing them frees the space; "
+ "anything still needed downloads again on next use."
Repeater {
model: Containers.unusedImages.slice(0, 5)
delegate: TextRow {
required property var modelData
width: parent.width
label: String(modelData.name ?? "")
detail: ""
value: Containers.formatBytes(Number(modelData.size ?? 0))
}
}
TextRow {
visible: Containers.unusedImages.length > 5
label: "and " + (Containers.unusedImages.length - 5) + " more"
detail: ""
value: ""
}
SettingRow {
width: parent.width
label: root.confirmingPrune === "images"
? "Remove " + Containers.unusedImages.length + " images?"
: "Unused images"
detail: root.confirmingPrune === "images"
? "Each is removed by name. Nothing that a container references is touched."
: Containers.unusedImages.length + " images, "
+ Containers.formatBytes(Number(Containers.disk.imagesReclaimable ?? 0))
visible: Containers.unusedImages.length > 0
controlWidth: 230
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: root.confirmingPrune === "images" ? "Keep them" : "Remove…"
enabled: !Containers.busy
onClicked: root.confirmingPrune =
root.confirmingPrune === "images" ? "" : "images"
}
SettingsButton {
visible: root.confirmingPrune === "images"
text: "Remove them"
tone: "danger"
enabled: !Containers.busy
onClicked: {
root.confirmingPrune = "";
Containers.pruneImages();
}
}
}
}
SettingRow {
width: parent.width
visible: Containers.unusedVolumes.length > 0
label: root.confirmingPrune === "volumes"
? "Remove " + Containers.unusedVolumes.length + " volumes?"
: "Unused volumes"
detail: root.confirmingPrune === "volumes"
? "A volume holds data. These are the ones podman reports as referenced by "
+ "nothing, but removing them cannot be undone."
: Containers.unusedVolumes.length + " volumes, "
+ Containers.formatBytes(Number(Containers.disk.volumesReclaimable ?? 0))
controlWidth: 230
divider: false
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: root.confirmingPrune === "volumes" ? "Keep them" : "Remove…"
enabled: !Containers.busy
onClicked: root.confirmingPrune =
root.confirmingPrune === "volumes" ? "" : "volumes"
}
SettingsButton {
visible: root.confirmingPrune === "volumes"
text: "Remove them"
tone: "danger"
enabled: !Containers.busy
onClicked: {
root.confirmingPrune = "";
Containers.pruneVolumes();
}
}
}
}
}
// ── the stacks ──────────────────────────────────────────────────────
Repeater {
model: Containers.projects
delegate: SettingsCard {
id: projectCard
required property var modelData
readonly property var runningSet:
(projectCard.modelData.containers ?? []).filter(c => c.state === "running")
readonly property var stoppedSet:
(projectCard.modelData.containers ?? []).filter(c => c.state !== "running")
readonly property string projectName: String(projectCard.modelData.name ?? "")
title: String(projectCard.modelData.title ?? "")
subtitle: {
const total = Number(projectCard.modelData.total ?? 0);
const up = Number(projectCard.modelData.running ?? 0);
const where = String(projectCard.modelData.configFile ?? "");
const counts = up === 0
? total + (total === 1 ? " container, stopped" : " containers, all stopped")
: up + " of " + total + " running";
return where === "" ? counts : counts + " · " + Containers.shorten(where);
}
SettingRow {
width: parent.width
label: "The whole stack"
detail: projectCard.runningSet.length === 0
? "Starts every container this project defines."
: "Stopping leaves the containers in place; nothing is removed."
controlWidth: 250
divider: projectCard.runningSet.length > 0
|| projectCard.stoppedSet.length > 0
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: "Start all"
visible: projectCard.stoppedSet.length > 0
enabled: !Containers.busy
onClicked: Containers.startProject(projectCard.projectName)
}
SettingsButton {
text: "Restart all"
visible: projectCard.runningSet.length > 0
enabled: !Containers.busy
onClicked: Containers.restartProject(projectCard.projectName)
}
SettingsButton {
text: "Stop all"
visible: projectCard.runningSet.length > 0
enabled: !Containers.busy
onClicked: Containers.stopProject(projectCard.projectName)
}
}
}
Repeater {
model: projectCard.runningSet
delegate: SettingRow {
required property var modelData
width: parent.width
label: String(modelData.name ?? "")
detail: String(modelData.image ?? "") + " · " + root.portSummary(modelData)
value: {
const health = String(modelData.health ?? "");
const up = root.uptimeOf(modelData);
if (health !== "" && up !== "")
return health + " · " + up;
return health !== "" ? health : up;
}
controlWidth: 250
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: "Logs"
onClicked: Containers.openLogs(String(modelData.name))
}
SettingsButton {
text: "Restart"
enabled: !Containers.busy
onClicked: Containers.restart(String(modelData.name))
}
SettingsButton {
text: "Stop"
enabled: !Containers.busy
onClicked: Containers.stop(String(modelData.name))
}
}
}
}
SettingRow {
width: parent.width
visible: projectCard.stoppedSet.length > 0
activatable: true
divider: root.isExpanded(projectCard.projectName)
label: (root.isExpanded(projectCard.projectName) ? "▾ " : "▸ ")
+ projectCard.stoppedSet.length
+ (projectCard.stoppedSet.length === 1
? " stopped container" : " stopped containers")
detail: {
const bad = projectCard.stoppedSet.filter(c => Number(c.exitCode ?? 0) !== 0);
return bad.length === 0
? ""
: bad.length + (bad.length === 1 ? " exited" : " exited") + " badly.";
}
onActivated: root.toggleExpanded(projectCard.projectName)
}
Repeater {
model: root.isExpanded(projectCard.projectName) ? projectCard.stoppedSet : []
delegate: SettingRow {
required property var modelData
required property int index
width: parent.width
label: String(modelData.name ?? "")
detail: String(modelData.image ?? "") + " · " + String(modelData.status ?? "")
controlWidth: 180
divider: index < projectCard.stoppedSet.length - 1
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: "Logs"
onClicked: Containers.openLogs(String(modelData.name))
}
SettingsButton {
text: "Start"
enabled: !Containers.busy
onClicked: Containers.start(String(modelData.name))
}
}
}
}
}
}
// ── containers no compose project claims ────────────────────────────
SettingsCard {
visible: Containers.loose.length > 0
title: "Not part of a project"
subtitle: "Started directly rather than by a compose file."
Repeater {
model: Containers.loose
delegate: SettingRow {
required property var modelData
required property int index
width: parent.width
label: String(modelData.name ?? "")
detail: String(modelData.image ?? "") + " · " + String(modelData.status ?? "")
controlWidth: 180
divider: index < Containers.loose.length - 1
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
text: "Logs"
onClicked: Containers.openLogs(String(modelData.name))
}
SettingsButton {
text: modelData.state === "running" ? "Stop" : "Start"
enabled: !Containers.busy
onClicked: modelData.state === "running"
? Containers.stop(String(modelData.name))
: Containers.start(String(modelData.name))
}
}
}
}
}
TextRow {
visible: Containers.scanned && Containers.available && Containers.total === 0
label: "No containers"
detail: "Nothing has been created on this machine yet."
value: ""
divider: false
}
}
// ── logs ────────────────────────────────────────────────────────────────
//
// A drill-in rather than a panel inside the scrolling page: logs need their
// own scrollback, and nesting one scrolling view inside another makes the
// wheel ambiguous over the region where you most want to use it.
Item {
anchors.fill: parent
visible: Containers.logTarget !== ""
Column {
id: logHeader
anchors.left: parent.left
anchors.right: parent.right
anchors.top: parent.top
anchors.leftMargin: 34
anchors.rightMargin: 34
anchors.topMargin: 30
spacing: 6
Row {
width: parent.width
spacing: 12
SettingsButton {
text: "‹ Back"
anchors.verticalCenter: parent.verticalCenter
onClicked: Containers.closeLogs()
}
Text {
anchors.verticalCenter: parent.verticalCenter
text: Containers.logTarget
color: Theme.fg
font.family: Theme.fontFamily
font.pixelSize: 22
font.weight: Font.DemiBold
}
}
Text {
width: parent.width
text: Containers.logError !== ""
? Containers.logError
: (Containers.logFollowing
? "Following. The last " + Containers.logLines.count + " lines are shown."
: "The stream has ended.")
color: Containers.logError !== "" ? Theme.danger : Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WordWrap
}
}
Rectangle {
anchors.left: parent.left
anchors.right: parent.right
anchors.top: logHeader.bottom
anchors.bottom: parent.bottom
anchors.leftMargin: 34
anchors.rightMargin: 34
anchors.topMargin: 14
anchors.bottomMargin: 30
radius: Theme.cardRadius + 2
color: Theme.alpha(Theme.bgDark, 0.75)
border.width: 1
border.color: Theme.alpha(Theme.fg, 0.07)
ListView {
id: logList
anchors.fill: parent
anchors.margins: 12
clip: true
model: Containers.logLines
spacing: 1
boundsBehavior: Flickable.StopAtBounds
cacheBuffer: 400
// Stay pinned to the newest line while the reader is already at
// the bottom, and leave the view alone the moment they scroll up
// to read something.
property bool pinned: true
onContentYChanged: logList.pinned =
logList.contentY >= logList.contentHeight - logList.height - 24
onCountChanged: if (logList.pinned) logList.positionViewAtEnd()
delegate: Text {
required property string line
width: logList.width - 24
text: line
color: Theme.fgDim
font.family: Theme.fontMono
font.pixelSize: Theme.fontSizeSmall
wrapMode: Text.WrapAnywhere
textFormat: Text.PlainText
}
}
}
}
}
config/dot/quickshell/modules/settings/DateTimePage.qml
+17 -5
View File
@@ -7,7 +7,7 @@
// because that genuinely is a Panama preference. // because that genuinely is a Panama preference.
// //
// Changing the timezone or network time needs privilege. timedatectl asks // Changing the timezone or network time needs privilege. timedatectl asks
// polkit, and a cancelled dialog surfaces as an error rather than as a value // polkit, and a canceled dialog surfaces as an error rather than as a value
// that appears to have been accepted. // that appears to have been accepted.
import QtQuick import QtQuick
@@ -33,7 +33,7 @@ SettingsPage {
SettingRow { SettingRow {
label: "Set automatically" label: "Set automatically"
detail: DateTime.ntpEnabled detail: DateTime.ntpEnabled
? (DateTime.ntpSynchronised ? "Synchronised with a time server" : "Waiting to synchronise") ? (DateTime.ntpSynchronized ? "Synchronized with a time server" : "Waiting to synchronize")
: "The clock is set by hand" : "The clock is set by hand"
controlWidth: 48 controlWidth: 48
divider: false divider: false
@@ -50,8 +50,16 @@ SettingsPage {
SettingsCard { SettingsCard {
title: "Timezone" title: "Timezone"
subtitle: "Currently " + (DateTime.timezone === "" ? "unknown" : DateTime.timezone)
+ ". Type to narrow the list." PickerRow {
id: zonePicker
label: "Time zone"
detail: DateTime.timezone === ""
? "Reading the system clock"
: DateTime.cityOf(DateTime.timezone) + " — " + DateTime.regionOf(DateTime.timezone)
value: DateTime.timezone === "" ? "Unknown" : DateTime.cityOf(DateTime.timezone)
divider: false
SearchField { SearchField {
id: zoneSearch id: zoneSearch
@@ -72,7 +80,10 @@ SettingsPage {
controlWidth: 90 controlWidth: 90
divider: index < root.matchingZones.length - 1 divider: index < root.matchingZones.length - 1
activatable: true activatable: true
onActivated: DateTime.setTimezone(modelData) onActivated: {
DateTime.setTimezone(modelData);
zonePicker.collapse();
}
} }
} }
@@ -83,6 +94,7 @@ SettingsPage {
divider: false divider: false
} }
} }
}
SettingsCard { SettingsCard {
visible: DateTime.lastError !== "" visible: DateTime.lastError !== ""
config/dot/quickshell/modules/settings/DesktopPage.qml
+226 -3
View File
@@ -8,21 +8,104 @@
// them. // them.
import QtQuick import QtQuick
import Quickshell
import qs.config import qs.config
import qs.services import qs.services
SettingsPage { SettingsPage {
id: root id: root
// Which project is one click from being forgotten. Same in-place confirm the
// SSH Keys and Snapshots pages use.
property string confirmingProject: ""
// Turning the last screen off would leave no dock anywhere and no obvious
// way back, so the final one cannot be removed -- it collapses to "every
// screen" instead, which is the same thing on one display and recoverable
// on several.
function toggleDockScreen(name: string): void {
const all = Quickshell.screens.map(screen => String(screen.name));
const current = Settings.dockScreens.length === 0
? all.slice()
: Settings.dockScreens.map(String);
const at = current.indexOf(name);
let next = current.slice();
if (at >= 0)
next.splice(at, 1);
else
next.push(name);
if (next.length === 0 || next.length === all.length)
next = [];
DesktopPreferences.set("dockScreens", next);
}
title: "Desktop & Dock" title: "Desktop & Dock"
lede: "Keep the shell instant, spatial, and out of your way." lede: "Keep the shell instant, spatial, and out of your way."
SettingsCard { SettingsCard {
title: "Dock" title: "Dock"
ChoiceRow { setting: "dockPosition" }
// One row per connected screen. Nothing selected means every screen,
// which is stated rather than left as an empty list somebody has to
// interpret -- and it is what a single-monitor machine should do
// without being configured at all.
SettingRow {
label: "Screens"
detail: Settings.dockScreens.length === 0
? "On every display"
: "On " + Settings.dockScreens.length + " of "
+ Quickshell.screens.length + " displays"
visible: Quickshell.screens.length > 1
controlWidth: 260
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 7
Repeater {
model: Quickshell.screens
delegate: Rectangle {
id: screenPill
required property var modelData
readonly property string screenName: String(screenPill.modelData.name ?? "")
// An empty list means all, so every pill reads as on.
readonly property bool on: Settings.dockScreens.length === 0
|| Settings.dockScreens.indexOf(screenPill.screenName) >= 0
width: pillLabel.implicitWidth + 20
height: 28
radius: 8
color: screenPill.on ? Theme.alpha(Theme.accent, 0.22)
: Theme.alpha(Theme.fg, 0.06)
border.width: screenPill.on ? 1 : 0
border.color: Theme.alpha(Theme.accent, 0.5)
Text {
id: pillLabel
anchors.centerIn: parent
text: screenPill.screenName
color: screenPill.on ? Theme.fg : Theme.fgDim
font.family: Theme.fontFamily
font.pixelSize: Theme.fontSizeSmall
}
HoverHandler { cursorShape: Qt.PointingHandCursor }
TapHandler { onTapped: root.toggleDockScreen(screenPill.screenName) }
}
}
}
}
ToggleRow { setting: "dockAutohide" } ToggleRow { setting: "dockAutohide" }
SliderRow { setting: "dockRevealDelayMs"; zeroLabel: "Instant" } SliderRow { setting: "dockRevealDelayMs"; zeroLabel: "Instant" }
SliderRow { setting: "dockHideDelayMs"; zeroLabel: "Instant"; divider: false } SliderRow { setting: "dockHideDelayMs"; zeroLabel: "Instant" }
SliderRow { setting: "dockIconSize"; divider: false }
} }
SettingsCard { SettingsCard {
@@ -62,7 +145,7 @@ SettingsPage {
detail: "Adjusted on the Appearance page, beside a live preview" detail: "Adjusted on the Appearance page, beside a live preview"
action: "Open Appearance" action: "Open Appearance"
divider: false divider: false
onTriggered: ShellState.openSettings("appearance") onTriggered: ShellState.openSettingsSection("appearance", "windows")
} }
} }
@@ -106,6 +189,80 @@ SettingsPage {
ToggleRow { setting: "hyprlandDonationNag"; divider: false } ToggleRow { setting: "hyprlandDonationNag"; divider: false }
} }
// Saved here, not created here. A layout is worth recording at the moment
// you have it right, so saving is a launcher command; this is where the
// ones you kept are reviewed and the ones you did not are removed.
SettingsCard {
title: "Projects"
subtitle: Projects.projects.length > 0
? "Saved window layouts. Opening one claims free workspaces, so it never lands on top of what you are doing."
: "No saved layouts yet. Arrange your windows, then run \"Save Layout as Project\" from the launcher."
Repeater {
model: Projects.projects
delegate: SettingRow {
id: projectRow
required property var modelData
required property int index
readonly property string projectName: String(projectRow.modelData.name ?? "")
readonly property bool confirming: root.confirmingProject === projectRow.projectName
label: projectRow.projectName
detail: projectRow.confirming
? "Forgetting this only removes the layout. Nothing that is open closes."
: projectRow.modelData.windows + " windows across "
+ projectRow.modelData.workspaces + " workspaces — "
+ (projectRow.modelData.applications ?? []).join(", ")
divider: projectRow.index < Projects.projects.length - 1
controlWidth: 210
Row {
anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter
spacing: 8
SettingsButton {
anchors.verticalCenter: parent.verticalCenter
visible: !projectRow.confirming
text: "Open"
enabled: !Projects.busy
onClicked: Projects.open(projectRow.projectName)
}
SettingsButton {
anchors.verticalCenter: parent.verticalCenter
visible: projectRow.confirming
text: "Forget it"
tone: "danger"
enabled: !Projects.busy
onClicked: {
root.confirmingProject = "";
Projects.remove(projectRow.projectName);
}
}
SettingsButton {
anchors.verticalCenter: parent.verticalCenter
text: projectRow.confirming ? "Keep" : "Forget"
enabled: !Projects.busy
onClicked: root.confirmingProject =
projectRow.confirming ? "" : projectRow.projectName
}
}
}
}
TextRow {
visible: Projects.lastError !== ""
label: "Problem"
detail: Projects.lastError
divider: false
}
}
SettingsCard { SettingsCard {
title: "Workspaces & focus" title: "Workspaces & focus"
subtitle: "Hyprland's workspaces are created and destroyed as you use them, so there is no fixed count to set." subtitle: "Hyprland's workspaces are created and destroyed as you use them, so there is no fixed count to set."
@@ -113,7 +270,8 @@ SettingsPage {
ToggleRow { setting: "workspaceBackAndForth" } ToggleRow { setting: "workspaceBackAndForth" }
ToggleRow { setting: "allowWorkspaceCycles" } ToggleRow { setting: "allowWorkspaceCycles" }
ToggleRow { setting: "focusOnActivate" } ToggleRow { setting: "focusOnActivate" }
ToggleRow { setting: "mouseMoveFocusesMonitor"; divider: false } ToggleRow { setting: "mouseMoveFocusesMonitor" }
ToggleRow { setting: "windowSwallow"; divider: false }
} }
SettingsCard { SettingsCard {
@@ -122,6 +280,71 @@ SettingsPage {
SliderRow { setting: "focusDurationMinutes"; divider: false } SliderRow { setting: "focusDurationMinutes"; divider: false }
} }
// Distinct from the snapshots below, which put THIS machine back as it
// was. This carries settings to a different one, and deliberately leaves
// behind anything that describes hardware.
SettingsCard {
title: "Carry settings to another machine"
subtitle: SettingsSync.lastError !== ""
? SettingsSync.lastError
: "Everything except what describes this machine: the display arrangement stays here."
ActionRow {
label: "Export"
detail: SettingsSync.lastAction === "export" && SettingsSync.carried > 0
? SettingsSync.carried + " settings written to " + SettingsSync.defaultPath
: "Writes " + SettingsSync.defaultPath
action: "Export"
enabled: !SettingsSync.busy
onTriggered: SettingsSync.exportTo(SettingsSync.defaultPath)
}
ActionRow {
label: "See what an import would change"
detail: SettingsSync.previewed
? SettingsSync.changes.length + " would change, "
+ SettingsSync.skipped.length + " skipped"
: "Reads " + SettingsSync.defaultPath + " without applying anything"
action: "Preview"
enabled: !SettingsSync.busy
onTriggered: SettingsSync.preview(SettingsSync.defaultPath)
}
// Only offered once a preview has said what it would do. Importing
// settings sight unseen is how somebody ends up wondering why their
// desktop changed.
ActionRow {
visible: SettingsSync.previewed && SettingsSync.changes.length > 0
label: "Apply those " + SettingsSync.changes.length + " changes"
detail: "Settings the file does not mention are left alone"
action: "Import"
enabled: !SettingsSync.busy
onTriggered: SettingsSync.importFrom(SettingsSync.defaultPath)
}
Repeater {
model: SettingsSync.previewed ? SettingsSync.skipped : []
delegate: TextRow {
required property var modelData
width: parent.width
label: String(modelData.key ?? "")
detail: "Skipped: " + String(modelData.reason ?? "")
value: ""
}
}
TextRow {
visible: SettingsSync.lastAction === "import" && SettingsSync.lastError === ""
label: SettingsSync.applied === 0
? "Nothing needed changing"
: SettingsSync.applied + " settings applied"
detail: "From " + (SettingsSync.exportedFrom || "the export")
value: ""
divider: false
}
}
SettingsCard { SettingsCard {
title: "Snapshots" title: "Snapshots"
subtitle: SettingsBackup.lastError !== "" subtitle: SettingsBackup.lastError !== ""
config/dot/quickshell/modules/settings/DesktopPreview.qml
+2 -2
View File
@@ -50,7 +50,7 @@ Rectangle {
// Stands in for the wallpaper. Static: an animated gradient here would // Stands in for the wallpaper. Static: an animated gradient here would
// repaint forever behind a settings page. // repaint forever behind a settings page.
// Follows the colour scheme. A preview that stays dark while the shell // Follows the color scheme. A preview that stays dark while the shell
// around it is light does not read as "your desktop" -- it reads as a // around it is light does not read as "your desktop" -- it reads as a
// screenshot of someone else's. // screenshot of someone else's.
gradient: Gradient { gradient: Gradient {
@@ -129,7 +129,7 @@ Rectangle {
required property bool focused required property bool focused
// The gradient border is drawn as a filled rounded rect with the window // The gradient border is drawn as a filled rounded rect with the window
// body inset on top of it: QML's Rectangle border takes a colour, not a // body inset on top of it: QML's Rectangle border takes a color, not a
// gradient, and the prism border is the whole signature here. // gradient, and the prism border is the whole signature here.
Rectangle { Rectangle {
id: frame id: frame
config/dot/quickshell/modules/settings/DisplayModePicker.qml
+8 -2
View File
@@ -15,6 +15,9 @@ Column {
property var monitor: null property var monitor: null
property bool enabled: true property bool enabled: true
// Emitted once a mode has been asked for, so a container can put the list
// away. Applying is still this component's job; closing is not.
signal picked
spacing: 0 spacing: 0
readonly property var grouped: { readonly property var grouped: {
@@ -106,11 +109,14 @@ Column {
TapHandler { TapHandler {
enabled: root.enabled && !rate.selected enabled: root.enabled && !rate.selected
onTapped: Displays.apply( onTapped: {
Displays.apply(
root.monitor.name, root.monitor.name,
rate.modelData.mode, rate.modelData.mode,
Displays.nearestCleanScale(rate.modelData.mode, root.monitor.scale), Displays.nearestCleanScale(rate.modelData.mode, root.monitor.scale),
root.monitor.transform) root.monitor.transform);
root.picked();
}
} }
} }
} }
config/dot/quickshell/modules/settings/DisplaysPage.qml
+109 -3
View File
@@ -22,14 +22,24 @@ SettingsPage {
property string selectedOutput: "" property string selectedOutput: ""
readonly property var monitor: Displays.monitorNamed(root.selectedOutput) readonly property var monitor: Displays.monitorNamed(root.selectedOutput)
?? (Displays.monitors.length > 0 ? Displays.monitors[0] : null) ?? (Displays.primaryFirstMonitors.length > 0 ? Displays.primaryFirstMonitors[0] : null)
readonly property string currentMode: root.monitor readonly property string currentMode: root.monitor
? root.monitor.mode ? root.monitor.mode
: "" : ""
// Every mode at the resolution in use, which is what a refresh-rate choice
// actually is: the same width and height at a different rate.
readonly property var ratesForCurrentResolution: {
if (!root.monitor || !root.monitor.modes)
return [];
return root.monitor.modes.filter(mode => mode.width === root.monitor.width
&& mode.height === root.monitor.height);
}
function syncSelectedOutput(): void { function syncSelectedOutput(): void {
if (!Displays.monitorNamed(root.selectedOutput)) if (!Displays.monitorNamed(root.selectedOutput))
root.selectedOutput = Displays.monitors.length > 0 ? Displays.monitors[0].name : ""; root.selectedOutput = Displays.primaryFirstMonitors.length > 0
? Displays.primaryFirstMonitors[0].name : "";
} }
// Probing I2C for DDC-capable monitors takes on the order of a second, so // Probing I2C for DDC-capable monitors takes on the order of a second, so
@@ -128,7 +138,7 @@ SettingsPage {
ChoiceGrid { ChoiceGrid {
width: parent.width width: parent.width
label: "Display" label: "Display"
options: Displays.monitors.map(monitor => ({ options: Displays.primaryFirstMonitors.map(monitor => ({
value: monitor.name, value: monitor.name,
label: monitor.description || monitor.name label: monitor.description || monitor.name
})) }))
@@ -175,10 +185,61 @@ SettingsPage {
title: "Resolution" title: "Resolution"
subtitle: "Applied straight away, then reverted automatically unless you confirm." subtitle: "Applied straight away, then reverted automatically unless you confirm."
PickerRow {
id: modePicker
label: "Resolution"
detail: root.monitor
? root.monitor.width + " × " + root.monitor.height + " native"
: "No display selected"
value: root.monitor
? root.monitor.width + " × " + root.monitor.height
: ""
enabled: !Displays.awaitingConfirmation && !Displays.busy
divider: false
DisplayModePicker { DisplayModePicker {
width: parent.width width: parent.width
monitor: root.monitor monitor: root.monitor
enabled: !Displays.awaitingConfirmation && !Displays.busy enabled: !Displays.awaitingConfirmation && !Displays.busy
onPicked: modePicker.collapse()
}
}
// Refresh rate on its own, because the rates for a resolution used to be
// reachable only by opening the resolution list -- which is now
// collapsed, so changing only the rate meant going through the mode you
// already had.
PickerRow {
id: ratePicker
label: "Refresh rate"
detail: "Rates this display offers at " + (root.monitor
? root.monitor.width + " × " + root.monitor.height
: "the current resolution")
value: root.monitor ? root.monitor.refreshRate.toFixed(2) + " Hz" : ""
visible: root.ratesForCurrentResolution.length > 1
enabled: !Displays.awaitingConfirmation && !Displays.busy
divider: false
Repeater {
model: root.ratesForCurrentResolution
delegate: TextRow {
required property var modelData
required property int index
width: parent.width
label: String(modelData.refreshLabel ?? "")
value: Displays.modeIsCurrent(root.monitor, modelData) ? "Current" : ""
controlWidth: 90
divider: index < root.ratesForCurrentResolution.length - 1
activatable: !Displays.modeIsCurrent(root.monitor, modelData)
onActivated: {
root.applyWith({ mode: modelData.mode });
ratePicker.collapse();
}
}
}
} }
} }
@@ -260,6 +321,51 @@ SettingsPage {
} }
} }
// Only with something to spread across. On one screen the choice has no
// meaning, the same way the Touchpad card stays hidden without a touchpad.
SettingsCard {
visible: Displays.monitors.length >= 2
title: "Workspaces"
subtitle: "GNOME asked this too. Off, every screen has its own workspaces and switching moves the one you are looking at; on, workspaces belong to the primary display and the others keep a screen of their own."
SegmentRow {
label: "Where workspaces live"
detail: Workspaces.applied
? (Workspaces.primaryOnly
? "Workspaces 1 to 10 are on the primary display."
: "Each display has its own workspaces.")
: "Chosen, but not in effect yet — the compositor has to reload."
options: [
{ value: false, label: "All displays" },
{ value: true, label: "Primary only" }
]
value: Workspaces.primaryOnly
enabled: !Workspaces.reloading
divider: !Workspaces.applied
onSelected: value => Workspaces.choose(value === true)
}
// Appears only when the compositor and the preference disagree, which
// is also how it disappears: applying makes its own reason to exist go
// away. A reload is a whole-session event, so it is asked for rather
// than done quietly the moment the switch moves.
ActionRow {
visible: !Workspaces.applied
label: Workspaces.reloading ? "Reloading…" : "Reload to apply"
detail: "Re-reads the compositor's configuration. Windows and workspaces stay where they are."
action: "Reload"
enabled: !Workspaces.reloading
divider: false
onTriggered: Workspaces.apply()
}
}
SettingsCard {
visible: Workspaces.lastError !== ""
title: "Workspace problem"
subtitle: Workspaces.lastError
}
SettingsCard { SettingsCard {
title: "Gaming display policy" title: "Gaming display policy"
subtitle: "Applied immediately and restored when the session starts." subtitle: "Applied immediately and restored when the session starts."
config/dot/quickshell/modules/settings/DockPinsEditor.qml
+102 -2
View File
@@ -45,6 +45,50 @@ Column {
DesktopPreferences.set("dockPinned", next); DesktopPreferences.set("dockPinned", next);
} }
// ── Dragging ────────────────────────────────────────────────────────────
//
// By a grip rather than the whole row. The objection this file used to
// record -- that dragging inside a Flickable inside a scrolling page is
// hard to get right and fails in a way that reads as breakage -- is real,
// and the answer is preventStealing on the grip: the Flickable cannot take
// a gesture that started there, so a vertical drag reorders instead of
// scrolling the page out from under it. The arrow buttons stay, because
// they are the keyboard-reachable path and a grip is not.
//
// The order is held here while the drag runs and written once on release.
// Committing on every slot crossed would rewrite settings.json a dozen
// times for one gesture.
property int draggingIndex: -1
property var workingOrder: []
readonly property var displayed: root.draggingIndex >= 0 ? root.workingOrder : root.pinned
function beginDrag(index: int): void {
root.workingOrder = root.pinned.slice();
root.draggingIndex = index;
}
function dragTo(target: int): void {
if (root.draggingIndex < 0 || target === root.draggingIndex)
return;
if (target < 0 || target >= root.workingOrder.length)
return;
const next = root.workingOrder.slice();
const moved = next.splice(root.draggingIndex, 1)[0];
next.splice(target, 0, moved);
root.workingOrder = next;
root.draggingIndex = target;
}
function endDrag(): void {
if (root.draggingIndex < 0)
return;
const next = root.workingOrder.slice();
root.draggingIndex = -1;
root.workingOrder = [];
root.commit(next);
}
function move(from: int, to: int): void { function move(from: int, to: int): void {
if (to < 0 || to >= root.pinned.length) if (to < 0 || to >= root.pinned.length)
return; return;
@@ -67,7 +111,7 @@ Column {
} }
Repeater { Repeater {
model: root.pinned model: root.displayed
SettingRow { SettingRow {
id: pin id: pin
@@ -76,15 +120,71 @@ Column {
required property int index required property int index
label: root.nameFor(pin.modelData) label: root.nameFor(pin.modelData)
detail: pin.modelData // The desktop id is shown only when the name alone would not say
// which entry this is. It is developer text, and repeating it under
// fifteen recognisable application names is noise that makes the
// list harder to scan, not easier.
detail: root.pinned.filter(other =>
root.nameFor(other) === root.nameFor(pin.modelData)).length > 1
? pin.modelData
: ""
divider: pin.index < root.pinned.length - 1 divider: pin.index < root.pinned.length - 1
controlWidth: 132 controlWidth: 132
// Lifted while dragging so the row being moved is the one that
// looks moved.
z: root.draggingIndex === pin.index ? 2 : 0
opacity: root.draggingIndex === pin.index ? 0.85 : 1
Row { Row {
anchors.right: parent.right anchors.right: parent.right
anchors.verticalCenter: parent.verticalCenter anchors.verticalCenter: parent.verticalCenter
spacing: 4 spacing: 4
// The grip. preventStealing is the whole reason this works
// inside a scrolling page: without it the Flickable claims the
// vertical gesture and the row never moves.
Item {
width: 26
height: 26
anchors.verticalCenter: parent.verticalCenter
Text {
anchors.centerIn: parent
text: "\u2261"
color: root.draggingIndex === pin.index ? Theme.accent : Theme.fgMuted
font.family: Theme.fontFamily
font.pixelSize: 15
}
MouseArea {
id: grip
anchors.fill: parent
preventStealing: true
cursorShape: Qt.SizeVerCursor
property real pressY: 0
onPressed: mouse => {
grip.pressY = mouse.y;
root.beginDrag(pin.index);
}
onPositionChanged: mouse => {
if (root.draggingIndex < 0 || pin.height <= 0)
return;
// How many whole rows the pointer has travelled from
// where it started. Rounded, so the swap happens as
// the grip passes the midpoint of the next row.
const travelled = (mouse.y - grip.pressY);
const slots = Math.round(travelled / pin.height);
if (slots !== 0)
root.dragTo(root.draggingIndex + slots);
}
onReleased: root.endDrag()
onCanceled: root.endDrag()
}
}
SettingsButton { SettingsButton {
text: "↑" text: "↑"
enabled: pin.index > 0 enabled: pin.index > 0

Some files were not shown because too many files have changed in this diff Show More