Gabriel Brown
96e4085919
The shell named a font, a pointer theme and a wallpaper that no package list installed and no stage placed. It went unnoticed because this machine collected all three under sunhat and never lost them; a fresh Fedora box would have come up with tofu for every shell glyph, the default pointer, and no wallpaper -- while Wallpaper.qml called that missing file `shippedPath`. The dependency contract reported PASS throughout, because it reads commands that scripts invoke and none of these are one. The new assets contract covers what it structurally cannot: fonts and pointer themes named in configs and gsettings, a shipped wallpaper that must exist, commands launched from QML, and directories nothing puts into service. Written against the broken tree first, where it found ten faults. Four of those were packages nobody had noticed were missing -- gnome-calendar, podman, pipewire-utils and flatpak -- alongside gnome-control-center, which backs fifteen rows of Panama's own Settings and is commented so it is not mistaken for GNOME-session residue later. Fonts turned out to need no install stage at all. Terra, which install-packages already enables, packages every Nerd Font, so sunhat's wget-and-unzip is replaced by five lines in a package list. The pointer theme had no such luck: it is packaged nowhere, so it is vendored rather than downloaded from a URL that can rot. espanso stays undeclared. It is in no enabled repository, and building it from source is the install method this repository is trying to stop using. Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
345 lines
14 KiB
Bash
Executable File
345 lines
14 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
|
|
# --- Helper functions ---
|
|
log() { echo -e "\033[1;34m[INFO]\033[0m $*"; }
|
|
|
|
# Define paths as they have not been defined by new bashrc yet!
|
|
PANAMA_PATH="${PANAMA_PATH:-$HOME/.local/share/Panama}"
|
|
PANAMA_BASH="${PANAMA_BASH:-$PANAMA_PATH/config/bash}"
|
|
PANAMA_DOT="$PANAMA_PATH/config/dot"
|
|
PANAMA_OLD="$PANAMA_PATH/config/old"
|
|
CONFIG="$HOME/.config"
|
|
|
|
# Make backup folder if it doesn't exist
|
|
mkdir -p "$PANAMA_OLD"
|
|
|
|
# --- Bashrc ---
|
|
echo -e "\n--- Replacing .bashrc ---"
|
|
# Backup existing .bashrc if it's a regular file
|
|
if [ -f "$HOME/.bashrc" ] && [ ! -L "$HOME/.bashrc" ]; then
|
|
log "Backing up existing .bashrc"
|
|
mv "$HOME/.bashrc" "$PANAMA_OLD/.bashrc"
|
|
fi
|
|
# Remove old symlink if it exists and points somewhere else
|
|
if [ -L "$HOME/.bashrc" ]; then
|
|
log "Removing old .bashrc symlink"
|
|
rm "$HOME/.bashrc"
|
|
fi
|
|
# Symlink Panama .bashrc file to ~/.bashrc
|
|
log "Symlinking Panama .bashrc file to ~/.bashrc"
|
|
ln -s "$PANAMA_BASH/.bashrc" "$HOME/.bashrc"
|
|
|
|
# Each entry is symlinked as ~/.config/<name> -> $PANAMA_DOT/<name>.
|
|
# "forge" is the GNOME tiling extension; "hypr"/"quickshell"/"wofi" are the
|
|
# Hyprland desktop. They coexist deliberately — the GNOME session keeps working
|
|
# while Hyprland is being used, so you can log back into either.
|
|
dirs=("espanso" "forge" "ghostty" "gtk-3.0" "gtk-4.0" "hypr" "kitty" "nvim" \
|
|
"quickshell" "tmux" "uwsm" "vicinae" "wofi" "xdg-desktop-portal")
|
|
|
|
# --- Vim vimrc ---
|
|
echo -e "\n--- Setting up vim ---"
|
|
mkdir -p "$HOME/.vim"
|
|
if [ -L "$HOME/.vim/vimrc" ]; then
|
|
rm "$HOME/.vim/vimrc"
|
|
log "Removed old symlink at ~/.vim/vimrc"
|
|
fi
|
|
if [ -f "$HOME/.vim/vimrc" ]; then
|
|
mv "$HOME/.vim/vimrc" "$PANAMA_OLD/vimrc"
|
|
log "Moved existing ~/.vim/vimrc to $PANAMA_OLD/vimrc"
|
|
fi
|
|
ln -s "$PANAMA_DOT/vim/vimrc" "$HOME/.vim/vimrc"
|
|
log "Linked $PANAMA_DOT/vim/vimrc → ~/.vim/vimrc"
|
|
|
|
for dir in "${dirs[@]}"; do
|
|
echo -e "\n--- Setting up $dir ---"
|
|
|
|
# Remove old symlink if it exists
|
|
if [ -L "$CONFIG/$dir" ]; then
|
|
rm "$CONFIG/$dir"
|
|
log "Removed old symlink at $CONFIG/$dir"
|
|
fi
|
|
|
|
# Backup existing directory if it exists
|
|
if [ -d "$CONFIG/$dir" ]; then
|
|
mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
|
|
log "Moved existing $dir config to $PANAMA_OLD/$dir"
|
|
# A regular file at this path (not a directory, not a symlink) is missed by
|
|
# the guards above, so `ln -s` below would fail with "File exists" -- back
|
|
# it up the same way.
|
|
elif [ -f "$CONFIG/$dir" ]; then
|
|
mv "$CONFIG/$dir" "$PANAMA_OLD/$dir"
|
|
log "Moved existing $dir file to $PANAMA_OLD/$dir"
|
|
fi
|
|
|
|
# Create symlink
|
|
ln -s "$PANAMA_DOT/$dir" "$CONFIG/$dir"
|
|
log "Linked $PANAMA_DOT/$dir → $CONFIG/$dir"
|
|
done
|
|
|
|
# tmux.conf ends with a source-file of current-theme.conf, generated from the
|
|
# color scheme rather than committed. Seed it so a fresh checkout starts themed
|
|
# -- the source-file is -q, so a missing file is silent, which would leave tmux
|
|
# unstyled with nothing to explain it.
|
|
TMUX_THEME="$PANAMA_DOT/tmux/current-theme.conf"
|
|
if [ -e "$TMUX_THEME" ]; then
|
|
log "Keeping existing tmux theme at $TMUX_THEME"
|
|
elif [ -d "$PANAMA_DOT/tmux/themes" ]; then
|
|
tmux_scheme="dark"
|
|
tmux_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$tmux_prefs" ]; then
|
|
tmux_stored="$(jq -r '.colorScheme // "dark"' "$tmux_prefs" 2>/dev/null || echo dark)"
|
|
[ "$tmux_stored" = "light" ] && tmux_scheme="light"
|
|
fi
|
|
[ "$tmux_scheme" = "light" ] && tmux_name="tokyonight-day" || tmux_name="tokyonight-moon"
|
|
cp "$PANAMA_DOT/tmux/themes/$tmux_name.conf" "$TMUX_THEME"
|
|
log "Seeded tmux $tmux_scheme theme ($tmux_name) → $TMUX_THEME"
|
|
fi
|
|
|
|
# hyprlock.conf is generated from a template on every color scheme change and
|
|
# is not committed. Seed it so the FIRST lock of a fresh install is themed --
|
|
# without it hyprlock falls back to its own defaults, which is a bare gray
|
|
# screen with none of this desktop's identity, and the first time anyone would
|
|
# find out is when they walked away from the machine.
|
|
HYPRLOCK_TEMPLATE="$PANAMA_DOT/hypr/hyprlock.conf.template"
|
|
HYPRLOCK_CONF="$PANAMA_DOT/hypr/hyprlock.conf"
|
|
if [ -e "$HYPRLOCK_CONF" ]; then
|
|
log "Keeping existing hyprlock config at $HYPRLOCK_CONF"
|
|
elif [ -r "$HYPRLOCK_TEMPLATE" ]; then
|
|
lock_scheme="dark"
|
|
lock_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$lock_prefs" ]; then
|
|
lock_stored="$(jq -r '.colorScheme // "dark"' "$lock_prefs" 2>/dev/null || echo dark)"
|
|
[ "$lock_stored" = "light" ] && lock_scheme="light"
|
|
fi
|
|
if [ "$lock_scheme" = "light" ]; then
|
|
sed -e "s/@FG@/55, 96, 191/g" -e "s/@MUTED@/97, 114, 176/g" \
|
|
-e "s/@ACCENT@/46, 125, 233/g" -e "s/@ERROR@/245, 42, 101/g" \
|
|
-e "s/@BG@/225, 226, 231/g" -e "s/@FIELD@/208, 213, 227/g" \
|
|
-e "s/@MUTED_HEX@/6172b0/g" -e "s/@ERROR_HEX@/f52a65/g" \
|
|
"$HYPRLOCK_TEMPLATE" > "$HYPRLOCK_CONF"
|
|
else
|
|
sed -e "s/@FG@/200, 211, 245/g" -e "s/@MUTED@/130, 139, 184/g" \
|
|
-e "s/@ACCENT@/130, 170, 255/g" -e "s/@ERROR@/255, 117, 127/g" \
|
|
-e "s/@BG@/34, 36, 54/g" -e "s/@FIELD@/46, 47, 61/g" \
|
|
-e "s/@MUTED_HEX@/828bb8/g" -e "s/@ERROR_HEX@/ff757f/g" \
|
|
"$HYPRLOCK_TEMPLATE" > "$HYPRLOCK_CONF"
|
|
fi
|
|
log "Seeded hyprlock $lock_scheme theme → $HYPRLOCK_CONF"
|
|
fi
|
|
|
|
# btop reads themes from its own config directory, but OWNS btop.conf -- it
|
|
# rewrites that file on exit -- so only the theme files are exposed, per file,
|
|
# and the config itself is left to btop. panama-theme-apps edits the single
|
|
# color_theme line in place.
|
|
BTOP_THEME_DIR="${XDG_CONFIG_HOME:-$HOME/.config}/btop/themes"
|
|
mkdir -p "$BTOP_THEME_DIR"
|
|
for btop_theme_src in "$PANAMA_DOT"/btop/themes/*.theme; do
|
|
[ -e "$btop_theme_src" ] || continue
|
|
btop_theme_dst="$BTOP_THEME_DIR/$(basename "$btop_theme_src")"
|
|
if [ -L "$btop_theme_dst" ]; then
|
|
rm "$btop_theme_dst"
|
|
fi
|
|
if [ -e "$btop_theme_dst" ]; then
|
|
log "Keeping existing btop theme at $btop_theme_dst"
|
|
else
|
|
ln -s "$btop_theme_src" "$btop_theme_dst"
|
|
log "Linked btop theme → $btop_theme_dst"
|
|
fi
|
|
done
|
|
|
|
# GTK3 has no include mechanism, so its settings.ini is generated whole from a
|
|
# template rather than layered. Without this, a fresh checkout has a template
|
|
# and no settings.ini, and GTK3 applications fall back to their built-in theme.
|
|
# panama-theme-apps rewrites both files on every scheme change after this.
|
|
for gtk_version in 3.0 4.0; do
|
|
gtk_template="$PANAMA_DOT/gtk-$gtk_version/settings.ini.template"
|
|
gtk_settings="$PANAMA_DOT/gtk-$gtk_version/settings.ini"
|
|
[ -r "$gtk_template" ] || continue
|
|
if [ -e "$gtk_settings" ]; then
|
|
log "Keeping existing GTK settings at $gtk_settings"
|
|
else
|
|
gtk_scheme="dark"
|
|
gtk_prefs="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$gtk_prefs" ]; then
|
|
gtk_stored="$(jq -r '.colorScheme // "dark"' "$gtk_prefs" 2>/dev/null || echo dark)"
|
|
[ "$gtk_stored" = "light" ] && gtk_scheme="light"
|
|
fi
|
|
if [ "$gtk_scheme" = "light" ]; then
|
|
gtk_name="adw-gtk3"; gtk_dark=0
|
|
else
|
|
gtk_name="adw-gtk3-dark"; gtk_dark=1
|
|
fi
|
|
sed -e "s/@GTK_THEME@/$gtk_name/" -e "s/@PREFER_DARK@/$gtk_dark/" \
|
|
"$gtk_template" > "$gtk_settings"
|
|
log "Generated GTK $gtk_version settings ($gtk_name) → $gtk_settings"
|
|
fi
|
|
done
|
|
|
|
# kitty.conf ends with `include current-theme.conf`, and that file is generated
|
|
# from the desktop color scheme rather than committed -- it is machine state.
|
|
# A fresh checkout therefore has no such file, and kitty starts by complaining
|
|
# about a missing include and falling back to its stock colors. Seed it from
|
|
# the scheme in settings.json (dark unless the user has chosen otherwise) so a
|
|
# first launch is themed; ColorScheme.qml overwrites it on every change after.
|
|
KITTY_THEME="$PANAMA_DOT/kitty/current-theme.conf"
|
|
if [ -e "$KITTY_THEME" ]; then
|
|
log "Keeping existing kitty theme at $KITTY_THEME"
|
|
else
|
|
scheme="dark"
|
|
settings="${XDG_CONFIG_HOME:-$HOME/.config}/panama/settings.json"
|
|
if [ -r "$settings" ]; then
|
|
stored="$(jq -r '.colorScheme // "dark"' "$settings" 2>/dev/null || echo dark)"
|
|
[ "$stored" = "light" ] && scheme="light"
|
|
fi
|
|
[ "$scheme" = "light" ] && theme="tokyonight-day" || theme="tokyonight-moon"
|
|
cp "$PANAMA_DOT/kitty/themes/$theme.conf" "$KITTY_THEME"
|
|
log "Seeded kitty $scheme theme ($theme) → $KITTY_THEME"
|
|
fi
|
|
|
|
# Vicinae 0.26 discovers user themes from its XDG data directory rather than
|
|
# from ~/.config/vicinae. Keep the authored theme in Panama with the rest of
|
|
# the launcher config and expose only that file at Vicinae's runtime path.
|
|
VICINAE_THEME_DIR="$HOME/.local/share/vicinae/themes"
|
|
mkdir -p "$VICINAE_THEME_DIR"
|
|
|
|
# Every authored theme, not just the dark one: vicinae.json selects a theme per
|
|
# system appearance, so linking only Moon left the launcher falling back to its
|
|
# stock palette whenever Panama was in light mode.
|
|
for theme_src in "$PANAMA_DOT"/vicinae/themes/*.toml; do
|
|
[ -e "$theme_src" ] || continue
|
|
theme_dst="$VICINAE_THEME_DIR/$(basename "$theme_src")"
|
|
|
|
if [ -L "$theme_dst" ]; then
|
|
rm "$theme_dst"
|
|
fi
|
|
|
|
if [ -e "$theme_dst" ]; then
|
|
log "Keeping existing Vicinae theme at $theme_dst"
|
|
else
|
|
ln -s "$theme_src" "$theme_dst"
|
|
log "Linked Vicinae theme → $theme_dst"
|
|
fi
|
|
done
|
|
|
|
# Panama-native applications live in the user data directory so launchers can
|
|
# discover them alongside system desktop entries. Keep each authored file in
|
|
# the repository and expose it with a narrow per-file symlink.
|
|
# Panama ships its own application icons. Without these the desktop entries fall
|
|
# back to a generic symbolic glyph, which is drawn for 16px toolbar use and
|
|
# looks wrong beside full-color application icons in the dock.
|
|
PANAMA_ICON_DIR="$PANAMA_PATH/config/local/share/icons/hicolor/scalable/apps"
|
|
USER_ICON_DIR="$HOME/.local/share/icons/hicolor/scalable/apps"
|
|
mkdir -p "$USER_ICON_DIR"
|
|
for icon_file in "$PANAMA_ICON_DIR"/*.svg; do
|
|
[[ -e "$icon_file" ]] || continue
|
|
icon_name="$(basename "$icon_file")"
|
|
icon_target="$USER_ICON_DIR/$icon_name"
|
|
if [[ -L "$icon_target" ]]; then
|
|
rm "$icon_target"
|
|
elif [[ -e "$icon_target" ]]; then
|
|
mv "$icon_target" "$icon_target.bak"
|
|
fi
|
|
ln -s "$icon_file" "$icon_target"
|
|
done
|
|
gtk-update-icon-cache -f -t "$HOME/.local/share/icons/hicolor" 2>/dev/null || true
|
|
|
|
# The pointer theme. oreo_blue_cursors is packaged by no Fedora repository -- it
|
|
# is a GitHub project -- so rather than download it at install time and depend on
|
|
# a URL that can rot, the theme is vendored into this repository and exposed the
|
|
# same way Panama's application icons are. Without it, every gsettings value,
|
|
# GTK settings.ini and XCURSOR_THEME naming it resolves to nothing and the
|
|
# session falls back to the default pointer.
|
|
PANAMA_CURSOR_DIR="$PANAMA_PATH/config/local/share/icons"
|
|
USER_CURSOR_DIR="$HOME/.local/share/icons"
|
|
mkdir -p "$USER_CURSOR_DIR"
|
|
for cursor_src in "$PANAMA_CURSOR_DIR"/*_cursors; do
|
|
[ -d "$cursor_src" ] || continue
|
|
cursor_name="$(basename "$cursor_src")"
|
|
cursor_dst="$USER_CURSOR_DIR/$cursor_name"
|
|
if [ -L "$cursor_dst" ]; then
|
|
rm "$cursor_dst"
|
|
elif [ -e "$cursor_dst" ]; then
|
|
log "Keeping existing cursor theme at $cursor_dst"
|
|
continue
|
|
fi
|
|
ln -s "$cursor_src" "$cursor_dst"
|
|
log "Linked cursor theme → $cursor_dst"
|
|
done
|
|
|
|
# The wallpaper the desktop already believes it ships. Wallpaper.qml calls this
|
|
# path `shippedPath` and substitutes it whenever wallpaperPath is unset, which is
|
|
# its default; panama-lock falls back to the same file, and hyprpaper.conf names
|
|
# it directly. Copied rather than symlinked, because ~/Pictures/Wallpapers is a
|
|
# directory the user owns and adds their own images to -- a symlink there would
|
|
# be a repository file masquerading as one of their own.
|
|
PANAMA_WALLPAPER_DIR="$PANAMA_PATH/config/wallpapers"
|
|
USER_WALLPAPER_DIR="$HOME/Pictures/Wallpapers"
|
|
if [ -d "$PANAMA_WALLPAPER_DIR" ]; then
|
|
mkdir -p "$USER_WALLPAPER_DIR"
|
|
for wallpaper_src in "$PANAMA_WALLPAPER_DIR"/*; do
|
|
[ -f "$wallpaper_src" ] || continue
|
|
wallpaper_dst="$USER_WALLPAPER_DIR/$(basename "$wallpaper_src")"
|
|
if [ -e "$wallpaper_dst" ]; then
|
|
log "Keeping existing wallpaper at $wallpaper_dst"
|
|
else
|
|
cp "$wallpaper_src" "$wallpaper_dst"
|
|
log "Copied wallpaper → $wallpaper_dst"
|
|
fi
|
|
done
|
|
fi
|
|
|
|
PANAMA_APPLICATION_DIR="$PANAMA_PATH/config/local/share/applications"
|
|
USER_APPLICATION_DIR="$HOME/.local/share/applications"
|
|
mkdir -p "$USER_APPLICATION_DIR"
|
|
for desktop_file in "$PANAMA_APPLICATION_DIR"/*.desktop; do
|
|
[[ -e "$desktop_file" ]] || continue
|
|
desktop_name="$(basename "$desktop_file")"
|
|
desktop_target="$USER_APPLICATION_DIR/$desktop_name"
|
|
if [[ -L "$desktop_target" ]]; then
|
|
rm "$desktop_target"
|
|
elif [[ -e "$desktop_target" ]]; then
|
|
log "Keeping existing desktop entry at $desktop_target"
|
|
continue
|
|
fi
|
|
ln -s "$desktop_file" "$desktop_target"
|
|
log "Linked $desktop_name → $desktop_target"
|
|
done
|
|
|
|
# Curate what files open with, now that Panama's own entries are linked.
|
|
#
|
|
# Left alone, a machine decides this by installation order -- whichever
|
|
# application registered for image/png last wins it -- which is how a pixel-art
|
|
# editor ends up owning screenshots and a video transcoder ends up owning MP3s.
|
|
# Seeding only fills roles nobody has chosen for; an existing "Open With" choice
|
|
# is always kept.
|
|
# Panama's own systemd user units -- currently the Flatpak update timer, which
|
|
# the Updates page switches on and off. Linked rather than copied so an edit in
|
|
# the repository is the edit that runs.
|
|
PANAMA_UNIT_DIR="$PANAMA_PATH/config/local/share/systemd/user"
|
|
USER_UNIT_DIR="${XDG_DATA_HOME:-$HOME/.local/share}/systemd/user"
|
|
if [[ -d "$PANAMA_UNIT_DIR" ]]; then
|
|
mkdir -p "$USER_UNIT_DIR"
|
|
for unit_file in "$PANAMA_UNIT_DIR"/*; do
|
|
[[ -e "$unit_file" ]] || continue
|
|
unit_name="$(basename "$unit_file")"
|
|
unit_target="$USER_UNIT_DIR/$unit_name"
|
|
if [[ -L "$unit_target" ]]; then
|
|
rm "$unit_target"
|
|
elif [[ -e "$unit_target" ]]; then
|
|
log "Keeping existing unit at $unit_target"
|
|
continue
|
|
fi
|
|
ln -s "$unit_file" "$unit_target"
|
|
log "Linked $unit_name → $unit_target"
|
|
done
|
|
systemctl --user daemon-reload 2>/dev/null || true
|
|
fi
|
|
|
|
DEFAULT_APPS_HELPER="$PANAMA_PATH/config/dot/quickshell/scripts/panama-default-apps"
|
|
if [[ -x "$DEFAULT_APPS_HELPER" ]] && command -v xdg-mime >/dev/null 2>&1; then
|
|
update-desktop-database "$USER_APPLICATION_DIR" >/dev/null 2>&1 || true
|
|
while IFS= read -r seeded_line; do
|
|
log "Default applications: $seeded_line"
|
|
done < <("$DEFAULT_APPS_HELPER" seed 2>&1 || true)
|
|
fi
|