The last of Section F, and the only thing in Panama that reads an
authentication token, so most of the design is about that rather than
about the number.
It never refreshes the token and never writes to the credentials file.
That token expires roughly hourly and Claude Code refreshes it on
demand; if this refreshed it too, two processes would be rotating one
credential, and a rotation invalidates the other holder's copy. The
failure mode is being silently signed out of Claude Code by a status
widget, which no bar indicator is worth. So it reads the token, uses it
while valid, and reports "waiting for Claude Code to refresh" when not
-- which covers the case that matters, because while you are using
Claude Code the token is fresh, and while you are not there is nothing
to watch.
The token never reaches argv either: curl takes the Authorization
header on stdin through --config, because a header passed as an
argument sits in /proc/<pid>/cmdline for the length of the request.
Same rule the password and MOK paths already follow. And it never
reaches the output: the record carries percentages and timestamps and
nothing else. Both are pinned, and both were checked by sabotaging the
collector to pass -H and watching the contract name it.
Off by default. It is a coding-tool readout, not something a
general-purpose desktop shows without being asked, and it hides unless
the collector has real numbers rather than displaying "unknown".
Thirty settings pages is the opposite of the usual problem: a person
arriving from GNOME, macOS or Windows cannot tell which few things
matter. This is those few, once, on the first start.
Not a tour. Nobody reads a tour, and a multi-step wizard on a desktop
somebody just installed is one more thing between them and using it.
One card, five keys, and a way out.
The chords come from the live keymap rather than being written here, so
a machine whose owner has already rebound something teaches what they
actually have. A welcome screen is the one surface read by somebody
with no way to tell it is wrong, which is exactly why it must not be.
Two deliberate departures from how every other surface behaves. It does
not close on a click outside, because a stray click in the first thirty
seconds would throw away the only explanation on offer. And dismissing
by any route marks it seen, Escape included, because a desktop that
reintroduces itself every login has failed to take no for an answer.
It stays reachable from the launcher afterwards, since the moment
somebody wants it again is exactly when a one-shot has thrown it away.
Also teaches the keymap to spell punctuation: slash, period, comma and
the rest were rendering as their raw keysym names, so the welcome
screen offered "Super + slash" and the cheatsheet agreed with it.
An idle screen costs a screen on wall power and the rest of your
afternoon on battery, so they should not be the same number. hypridle
has no concept of a power source -- one config, one set of timeouts --
so rather than maintaining two configs and swapping them, panama-idle
builds the single config from whichever key set applies, and IdleLock
rebuilds it when the charger comes or goes. That runs through the same
400ms debounce a settings change uses, so a loose charger cannot
restart hypridle in a loop.
The battery keys fall back to their AC counterparts rather than to the
schema defaults. Without that, unplugging would silently override a
deliberately long timing with a shipped short one, which is the kind
of thing you would notice only by losing work.
A machine with no battery reads none of it and generates exactly what
it generated before. The contract pins that alongside the two obvious
directions, and was checked by sabotaging the detection to confirm it
fails rather than passing vacuously.
Panama had no idea whether it was running on a laptop. No upower, no
battery, no lid, no AC: hypridle.conf says "This is a desktop" in its
own header, and that was true of the code as well as the machine.
panama-hw answers hardware questions one at a time, exits 0 or 1, and
prints nothing, so scripts, services and contracts all ask the same
way. The definition the rest of the laptop work hangs on is one line:
clamshell is lid-closed AND an external monitor. A machine with no
mains supply at all reports as being on wall power, because a desktop
cannot run out of it.
The battery service follows Vitals: sysfs through FileView, an
availability flag, and no subprocess on the timer. Globbing is the one
thing QML cannot do -- a battery is BAT0 or BAT1 or CMB0, mains is AC
or ADP1 or ACAD -- so panama-battery resolves the names once and the
shell reads the files directly after. Nothing falls back to a
plausible zero: a desktop shows no indicator, no card, and no charge
limit control where the firmware has no ceiling.
Also repairs two contracts that were already failing and had not been
noticed, because only the full suite runs them. The dependency
scanner treated line-initial variable assignments, case labels,
comments and heredoc bodies as commands, and `count`, `host`, `cancel`
and `import` are all real binaries on Fedora, so `command -v` could
not filter them out. It now drops comments and heredoc bodies and
requires a command to be followed by whitespace. Verified it still
catches a genuinely undeclared dependency rather than passing quietly.
The launcher command contract had not been told about the fourteen
commands added earlier today.
The dock shipped a pin for claude-desktop, and the application it names has
since been repackaged: the entry is com.anthropic.Claude now, and only the
binary kept the old name. A pin that resolves to nothing does not announce
itself -- the dock simply has one fewer icon than the settings say it should.
Found by the dock pins contract, which exists for exactly this and had been
passing until the application updated underneath it.
Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
Screenshots and recordings offered three folders to choose between, and three
guesses cannot include the folder somebody's other software already writes to --
which is the only folder that matters. This machine has had ~/Pictures/Screenshots
and ~/Videos/Screencasts since long before Panama, and Panama was writing
recordings to a Videos/Recordings it invented. Both are free text now, and the
recording default is the folder that was already there.
Wallpapers were swept from four directories at once, so the distribution's stock
images arrived mixed in with the user's own and there was no way to ask for just
one. Where wallpapers live is something somebody knows about their own machine.
It is a setting, not a search.
All three accept an absolute path as well as one relative to home, which meant
fixing Capture: it prefixed $HOME unconditionally, so naming /mnt/captures would
have written screenshots to ~/mnt/captures and left nobody able to find them.
The generator turned out to skip any entry whose comment sits inside the braces
rather than above them -- it looks for `key:` immediately after `{`. Three
settings were invisible in the reference because of it, one of them dockScreens,
which has never appeared there at all. The staleness contract could not see it
either: regenerating reproduced the same omission, so the copy was current and
incomplete at once. It now counts what was declared against what it could read
and refuses rather than quietly documenting less than exists.
Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
GNOME's Multitasking panel asked one workspace question worth reproducing, and
it is not which workspace goes on which screen. It is whether the second screen
participates at all: workspaces on the primary display only, or each screen with
its own. Ten rows of per-workspace assignment would be more powerful and worse.
Off is Hyprland's own behaviour and emits nothing. On pins workspaces 1 to 10 --
however many ALT+1..ALT+0 actually reach, read from keybinds.lua rather than
written down twice -- to whichever output is recorded as primary. With no
primary recorded, nothing is pinned: guessing one would move every workspace
onto whichever output happened to sort first, and this machine is in exactly
that state.
Applying is a reload, which is the part that shaped the design. Hyprland reads
workspace rules at config time and will not remove one afterwards -- a rule
written with an empty monitor keeps its old binding, which was checked rather
than assumed. Only a reload clears them, so the config is the only honest source
and the page cannot pretend a change has landed before one happens. Hence a
service that reads `hyprctl workspacerules` back rather than inferring success
from having written the preference, and a Reload row that exists only while the
two disagree.
Verified end to end against the live compositor and put back: off emits nothing,
on emits ten rules naming the primary, and turning it off clears them. The
settings file came back byte-identical.
Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
Four things a Hyprland desktop can do that this one was not.
Searching from the launcher needed no launcher work at all: Vicinae already
models it, so this is a script command with one percent-encoded argument. Make
it the fallback command and anything typed that matches nothing else offers to
search it. Bangs come free -- they are a property of where the query is sent,
not of the launcher -- so !yt reaches YouTube without a line of bang parsing.
Suggestions could not be a script command. They need a view that reacts as you
type, which is an extension: TypeScript, compiled, querying the same endpoint
Firefox's address bar uses. It debounces, and aborts the request in flight on
every keystroke -- typing is faster than the network, and an older answer
landing after a newer one leaves the list describing a query that is no longer
on screen. A bang skips suggestions entirely, because Google has no useful
guesses about "!yt".
The engine is now written down twice, once in each. The contract pins that they
agree, since searching from the fallback and searching from the suggestions
reaching different places is the kind of wrong that looks fine.
Gestures mirror GNOME: three fingers sideways for workspaces, up for the
overview, down to dismiss it. Open and close rather than toggle both ways --
toggling means swiping up from an open overview closes it, which is not what the
fingers meant. Hyprland reads gesture registrations at startup so they cannot be
a setting, but distance and direction can be, and are.
Window swallowing is off by default and a preference like every other misc
setting here. A terminal that vanishes when you did not ask for it is confusing
rather than broken, which is worse.
Claude-Session: https://claude.ai/code/session_01Q84axqUE5inJhf5Jz9CFy1
Three things that were parked, and the reasons they were parked turned out to be
the useful part of doing them.
The Dock can sit on the left or the right as well as the bottom. Everything that
assumed the bottom edge is now asked which edge it is on: the anchors, the axis
that gets an implicit size, the sliver of input region that survives hiding, the
direction the body slides away in, and which side a tooltip opens towards. The
body was a Row and is a Grid, because one declaration then serves both
orientations -- Row and Column would each need their own children, and the
cross-axis anchors that centre items in a Row are the wrong axis in a Column.
Bottom is unchanged in every particular, and the settings default to it, so a
hot reload in the middle of this work left the running dock exactly where it
was.
One bug worth recording because static review would never have found it: a dock
spans the edge it lives on, which means anchoring BOTH ends of that edge. The
first side dock anchored top and left only, was free to collapse to its implicit
height, and came out one pixel tall. It parsed, it loaded, and it rendered
nothing. The contract measures the geometry rather than reading the source for
that reason, and was verified by putting the single-ended anchor back.
Per-screen is a list of names where empty means every screen, because a list is
what goes stale when a display is unplugged and "all" should not be spelled as
one. Turning off the last screen collapses to "all" rather than leaving no dock
anywhere and no obvious way back.
Pins can be dragged by a grip. The objection this file recorded for a long time
was real -- dragging inside a Flickable inside a scrolling page fails in a way
that reads as breakage -- and the answer is preventStealing on the grip, so the
page cannot claim a gesture that started there. The arrow buttons stay: they are
the keyboard-reachable path and a grip is not. The order is held locally during
the drag and written once on release, rather than rewriting settings.json for
every slot crossed.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
A mode is on because something is true right now: a game is running, a window is
fullscreen on a given display, a workspace is focused, the clock is inside a
window. That is asked again rather than fired once, and it is the whole reason
schedules could be included here without the usual failure modes. A machine
asleep at 23:30, rebooted at 02:00, or opened at 08:00 into a window that has
already passed all reach the right answer by being asked again; an alarm gets
all three wrong.
The midnight-crossing rule is the part worth being careful about: a window
belongs to the day it STARTS on, so a Friday-only 23:30-07:00 covers Saturday
morning and must not cover Saturday night. That arithmetic was tested as pure
logic before anything was built on it, including every malformed input failing
closed -- silencing someone because a time string was wrong is the worst way
this could fail.
This does not take over the manual timed session. FocusSession already owns
that, with its capsule, shortcut, Quick Settings entry and contracts, so modes
defer entirely while one runs. Two writers of Do Not Disturb would each restore
whatever the other happened to leave behind.
Gaming hands over rather than being duplicated. The hook was silencing
notifications itself, which would have made exactly those two owners -- and
Gaming.active only polls while its settings page is open, so a mode could not
have seen a game reliably in any case. The hook reports the game over IPC now
and the mode decides what that means, the Gaming page points at it, and
gamingSilenceNotifications is retired from the schema, since a setting nothing
reads is the dead row this work keeps removing.
Sleep ships disabled. A desktop that starts silencing someone on first boot has
overstepped, whatever the default hour.
Three contracts moved with it. gaming-contract asserted the hook uses setDnd,
which was right before and wrong now; the shell-side assertions that setDnd and
dndState exist stay, because a toggle would flip an already-silent machine back
on. The new contract is proven to fail by breaking the midnight rule and by
letting modes run alongside a manual session.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Nine outputs named after their chipsets cannot be told apart by reading, so each
one gets a Test button that plays a short sample out of that device. Targeted by
node name rather than by making it the default first, because finding out which
is which should not move where everything else is playing.
That belongs in its own service rather than in AudioDevices. sound-page-contract
forbids Process, pactl and wpctl in the files that own device state, and it is
right to: shelling out there races the PipeWire service that owns those same
objects. Playback is a different thing -- pw-play opens its own stream and
mutates no device, so there is nothing to race -- but the rule's letter covered
it, and weakening a guard to fit a new case is how guards stop meaning anything.
SoundTest exists so AudioDevices stays native bindings only.
Worth recording next to the call: pw-play falls back to the default output for a
target it cannot find, rather than failing. A stale node name would play from
the wrong device and look exactly like a successful test, which is why the name
is taken straight from the live node.
The Dock's icon size was a constant in Theme. It goes through the preference
schema like everything else, so validation, search, the generated docs and the
write sweep all pick it up without being told about it separately -- and two
contracts duly failed until docs/settings.md and the per-page commands were
regenerated.
Dock position is deliberately not here. It is not a setting but a rework: the
dock is anchored bottom, and the reveal strip, tooltip placement, intellihide
and the qs-dock rule in hypr/rules.lua all assume that. Doing it properly means
changing compositor rules on a machine somebody uses daily, which is not
something to start as a side effect of adding a slider.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Live first, because unlike every other page here this one has a live
dimension: card temperature, power draw, whether Game Mode actually
engaged. It polls only while it is open, since a settings page nobody is
looking at has no business waking the CPU.
The part that makes it Panama's page rather than a gamemode config
editor is the hook. gamemode runs a script when a game asks for it and
another when the game exits, so the power profile switches to
performance and notifications go quiet for exactly the duration of a
game -- and afterwards both go back to what they WERE, not to a default.
A Do Not Disturb someone set by hand survives a game; a power profile
someone chose is restored rather than replaced. Verified against real
gamemode activation, not merely by calling the hook.
Two things the page reports rather than hides. Game Mode's headline
trick is switching the CPU governor to performance, and this machine
already runs performance, so it says so instead of implying it helps.
And Proton builds are listed but never chosen: Steam picks the runtime
per game, and a control here would claim an authority this page does not
have.
The hook first called a notifications function that did not exist, and
the one that did was a TOGGLE -- the wrong primitive entirely, since
toggling at game start would unsilence notifications that were already
silent. The shell gained an explicit setter and reader.
search-routing-contract kept its own hand-written list of every page,
which made adding one fail as "not a known page" -- a sixth place to
register a page and a sixth chance to forget. It now derives the mapping
from the shell, which already knows it.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Two of the three panels still handed to GNOME, having actually checked
each rather than repeating that they were not worth owning.
Universal Access turned out to be mostly ours already: the magnifier,
pointer size, text scale, motion and dimming were all present. High
contrast was the real gap. It reaches GTK4 applications through the
desktop portal, which republishes GNOME's accessibility setting as
org.freedesktop.appearance contrast -- so no high-contrast theme is
involved, and none is installed here. Verified end to end: committing
the preference drove gsettings and the portal reported contrast 1.
Sticky, slow and bounce keys stay absent. There is no Wayland or
Hyprland implementation, and the compositor would store the XKB option
while nothing ever acted on it.
Remote desktop gained port, view-only, and clearing stored credentials.
SETTING credentials opens a terminal running grdctl, which prompts for
the password itself. That is not a hand-off for lack of effort: grdctl
takes the password on a terminal and core-dumps without one, and the
only alternative -- passing it as an argument -- would publish it
through /proc to every process on this machine. Typed into grdctl
directly it never passes through Panama, and a contract now fails if it
ever appears on a command line.
Color stays with GNOME, and not for lack of effort either. colord runs
here with seven profiles and zero devices registered, because the
daemons that register displays do not run under this session, and
Hyprland exposes no ICC, gamma, or color-management option at all. A
Color page could import a profile, attach it to nothing, and change
nothing -- the same failure refused for rollback and printer drivers.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
colour -> color, behaviour -> behavior, centre -> center, favourite ->
favorite, and about twenty other pairs, applied consistently across
comments, docs, error/UI copy, and a handful of QML identifiers that
used the British spelling as their actual name: SystemSettings'
serialiseValue/serialiseTable/normaliseGradient, Displays'
normaliseModes, Wallpaper's normalisePolicy, SettingsBackup's
serialiseHomeState, DateTime's ntpSynchronised property, Clipboard's
_normalise helper, and ShortcutCapture's cancelled signal (with its
onCancelled handler in ShortcutsPage.qml). Every call site and the two
tests that assert on the literal source text (settings-ownership and
settings-backup-live contracts) were updated in lockstep.
Left untouched: config/dot/espanso/match/packages/misspell-en/ is a
vendored third-party autocorrect dictionary -- its entries are typo
corrections, not our prose, and rewriting them would fight the
package's own purpose (and any future re-sync from upstream).
The already-American `favorites` property (Home page pinned
accessories) was never actually misspelled -- only nearby comments and
error strings said "favourites" -- so no data migration was needed
there.
Claude-Session: https://claude.ai/code/session_01E6TJUAh41HaP25MVHWkhRZ
Phase 4, first slice. Theme.qml hardcoded the Prism pair, so the one
thing that carries every state meaning in the desktop -- focused, active,
on -- was the one thing nobody could change. 74 files read Theme.accent,
so making it a setting moves all of them at once.
Named accents rather than a colour picker, which is the design decision
worth defending. One hex cannot serve both schemes: a colour legible on
the Moon background is usually illegible on the Day one, and a picker
that lets someone build an unreadable desktop is not a feature. So each
name carries a curated pair per scheme, and every one of the sixteen
resulting colours measures at least 3:1 against the ground it sits on --
checked, not assumed. It is also GNOME's model, which is the parity
being chased.
The focused window border comes with it, and only because the ownership
rule made that safe. ColorScheme owns the inactive border as a
scheme-relative contrast role; the focused Prism border is the accent
role owned by the theme. Writing it from the accent would have been
reckless before that boundary existed, since a scheme change would have
erased the user's choice. Both borders are now pushed together, because
each accent carries separate light and dark pairs, so switching schemes
must restate the focused border too.
The gradient is written as a Lua table, not a string. The string form
carries only one stop, and passing two as a string is accepted and
silently keeps the previous value.
Swatches are drawn as the gradient they produce rather than as flat
dots, because the gradient is what is being chosen. Each carries its
name permanently rather than in a tooltip: telling swatches apart by
colour is precisely what someone with a colour vision deficiency cannot
do, which is also why the palette is named in the first place.
Verified end to end by switching to rose and watching the compositor
report eeff757f/eec099ff, then reverting.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Measured the gap first: of the 38 real Hyprland options Panama's own Lua
sets, only 16 were editable in Settings. Everything else required a text
editor, which is the thing this app exists to stop. This closes most of
that: 66 mapped options now, from 47.
Window shape and shadows on Appearance: corner shape (rounding_power),
focused and fullscreen opacity, shadow falloff and hard-edged shadows.
Window edges, master layout and Hyprland's own notices on Desktop & Dock.
Three of these are corrections rather than additions.
Master layout options existed nowhere, while Settings has offered "Master
and stack" as a choice since this morning -- a layout you can select and
cannot configure is barely a choice. Its card is hidden unless that
layout is actually selected, since settings that do nothing under the
layout you are running are worse than not offering the layout at all.
The four Hyprland notices -- logo, splash, update news, donation nag --
are all turned off by looks.lua on the user's behalf. Defensible as a
default, but not a decision anyone could reverse. They are stored
positively ("show this") and written as Hyprland's `disable_*` through a
new `invert` flag, because a switch labelled "Disable splash text" that
must be ON to hide something is a small cruelty. The Lua does the same
inversion so both sides agree.
Everything new also reads from prefs in looks.lua. Without that these
would apply live and silently revert on the next compositor reload,
which is the failure this codebase keeps designing against.
Two shapes the write path had never seen. Border colours are gradients
and shadow offsets are vec2, and the verifier understood neither -- it
returned false for anything outside int/bool/float/str/css, so both
would have reported every write as rejected. Gradients also need real
care: the stubs declare them as `string|{colors,angle}`, and the string
form carries only ONE stop, so writing "rgba(a) rgba(b) 45deg" as a
string is accepted and keeps the previous value. Verified that directly.
They are also written in one notation and read back in another
(`{colors={"rgba(3b426199)"},angle=45}` becomes `993b4261 45deg`), so
comparison normalises both sides.
Border COLOUR is deliberately not exposed yet. col.inactive_border is
written by ColorScheme on every scheme change, so a user's choice would
be silently overwritten, and col.active_border is the Prism gradient,
which needs a colour control this app does not have. Shadow offset is
left out for the same reason -- the vec2 support is in place for
whenever the widget exists.
Verified each new option applies and reverts against the live
compositor, and that the schema, enum-map, nav, write and commit/reset
contracts all pass.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Found by codex's GNOME Tweaks audit and verified against the compositor:
`hyprctl descriptions` publishes input:follow_mouse as
map: [{"separate":3},{"detached":2},{"follow":1},{"disabled":0}].
Panama labelled 0 "Never", 1 "Click to focus", 2 "Sloppy focus". So this
desktop, sitting on the shipped value of 1, has been running
focus-follows-pointer the whole time while Settings called it "Click to
focus" -- and the way to actually GET click-to-focus was to choose
"Never". Value 3 was not offered at all. hypr/input.lua carried the same
wrong claim in a comment.
The shipped VALUE is left alone. Which focus mode this desktop should
use is a behaviour decision rather than a correction, and all four are
now reachable from Settings.
Nothing could have caught this. The compositor accepts 1, reads back 1,
and the write contract passes: the value is valid, it just means
something other than the label. The only authority on what each number
MEANS is the compositor, and it publishes that. So enum-hypr-map-contract
now checks every compositor-backed enum against the published map --
that offered values exist, and that published values are offered, since
a missing one is a capability nobody can reach.
Writing it immediately found two more of the same: variable refresh rate
offered Off and fullscreen-games while the compositor publishes four
(always-on and fullscreen-only were unreachable, and fullscreen-only is
what someone wanting VRR for video rather than games wants), and direct
scanout was missing its always-on value. Both now offer everything, with
a detail line per option rather than a bare word.
Verified the contract catches the original followMouse gap and a value
outside the map.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The page had two settings and a hand-off card claiming GNOME's stack
provided "screen reader, zoom, and on-screen keyboard". Zoom did not
need handing off at all, and the claim about the rest was optimistic.
Zoom is native now. Hyprland has a real magnifier -- cursor:zoom_factor
follows the pointer -- so it is a slider here rather than a button that
opens another application. Inactive windows can also be dimmed as well
as faded, which is the other thing that makes a focused window
unmistakable. 47 mapped compositor options, from 43.
What is NOT here is the more useful half of the change. Sticky keys,
slow keys, bounce keys and mouse keys are AccessX, an X11 SERVER
feature. XKB under Wayland has no accessx option group at all -- checked
against evdev.lst, which lists altwin, caps, compose, ctrl, grp and the
rest, and nothing resembling accessx -- and Hyprland implements none of
it. The compositor will accept "accessx:enable" as a keyboard option and
store it happily; I verified that, and verified nothing acts on it.
So the page says plainly that they are unavailable in this session
rather than offering switches, and does not point at GNOME's panel for
them either: the daemon that would apply those keys is not running here,
so that hand-off would be just as empty. Orca is offered instead, since
the accessibility bus genuinely does work.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Two things, both closing gaps in work that was already reported done.
GNOME's Multitasking panel, in Hyprland's terms: tiling layout, split
behaviour, floating-window snapping, workspace wrap-around and
back-and-forth, whether applications may take focus, and whether the
pointer changes the active display. Hyprland creates and destroys
workspaces as you use them, so there is no fixed count to expose, and
the page says so rather than leaving a conspicuous absence.
The Desktop page described the first two of these as read-only facts --
"Layout: Tiling", "Workspace movement: Dynamic" -- which was never true.
Both are ordinary Hyprland options that happened to have no controls,
and TextRow's own documentation says a setting the user could reasonably
change does not belong in it. Schema defaults are Panama's shipped
values from looks.lua rather than Hyprland's own, so restoring defaults
returns the desktop to how it ships. 43 mapped options now, from 35.
The launcher had no light theme. vicinae.json already selected a theme
per system appearance, but both entries pointed at Moon, so choosing
light mode left the most frequently opened window on the desktop dark --
a hole in the light/dark work, not a missing feature. Day is authored
from the same palette as the kitty Day theme so the two cannot drift,
and link-dotfiles now installs every authored theme rather than only the
dark one, which is why the gap survived being noticed.
Its placeholder colour is not Tokyo Night Day's own: that measures
2.54:1 against the background, below the 3:1 floor for secondary text.
This is 3.25:1, the same value used for neovim's light comments.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
More GNOME Settings parity.
Region & Language is new. The locale is localectl's, and Panama stores no
copy of it -- there is exactly one system locale, so a preference here
would be a second source of truth that drifts the moment anything else
changes it. Codes are resolved against iso-codes into "Portuguese
(Brazil)" the way GNOME does, with the code kept visible because it is
what actually gets written and someone choosing between two Spanish
variants needs to see it. Changing it is privileged and only applies to
programs started afterwards, so the page says a sign-out is needed
rather than claiming the new language is in use.
The service is called SystemLocale, not Locale: QML has a built-in
Locale value type that silently shadows a singleton of that name, and
every binding then reads properties off the wrong thing. The page
rendered empty with nothing but "cannot read property of undefined" to
explain it.
About now answers what GNOME's About answers -- model, processor,
memory, disk, OS, kernel, windowing system -- where before it listed
only Panama's own component versions. Graphics is joined from
GraphicsDevices rather than read again, because two readouts of the same
hardware are two things that can disagree. Placeholder DMI strings
("To Be Filled By O.E.M.") are filtered out, and unreadable facts are
omitted rather than shown as "Unknown".
The Fedora hand-off card was one row listing five subjects that opened
the network panel regardless. Naming a panel and then not opening it
reads as a broken button rather than a deliberate hand-off. Each subject
now opens the panel that owns it, and openGnomePanel takes an optional
subpage so "Users" reaches System's users page the way GNOME's own
desktop entry does, instead of dropping the user on System's front page.
Printers and online accounts are not repeated here; they stay with the
network hardware on Network & Devices.
One bug this surfaced, caught by the hyprland write contract: the Lua
config key and the hyprctl option name genuinely differ for tap to
click. hl.config wants input.touchpad.tap_to_click; getoption answers to
input:touchpad:tap-to-click. Either spelling used for both fails -- a
hyphen is not a Lua identifier, and the underscored name is not a known
option -- which is what the schema's two separate fields are for.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Working towards parity with GNOME Settings, which splits pointing
devices into their own panel. Panama had pointer speed and focus-follows
buried under a page called "Input & Shortcuts", and had nothing at all
for scroll direction, acceleration profile, scroll speed, left-handed
buttons, or any touchpad setting -- all of which could only be changed
by editing hypr/input.lua by hand, which is the thing this app exists to
stop.
Every new mapping was read back off the running compositor rather than
assumed, and two were not what they look like: touchpad drag lock is an
int with three states, not a switch, and scroll factors are floats even
at their default of exactly 1. Getting either wrong makes every write to
that setting look rejected. The shape contract now covers 35 mapped
options, up from 23.
The touchpad card renders only when a touchpad is attached, which is
what InputDevices is for. On a desktop it would be worse than useless:
every switch on it would appear to work, because the preference is
stored and Hyprland accepts an option for a device class it has no
member of, so the settings would silently affect nothing.
Keyboard layout was read-only text, justified by a note saying changes
needed a compositor reload. That is not true in 0.56.2 -- setting
input:kb_variant through hl.config re-keymaps attached keyboards
immediately, verified by watching active_keymap on a real keyboard
change to "English (US, intl., with dead keys)" and back. So layout,
variant, and options are now real controls, joined by a TextEntryRow
that commits on Enter or focus loss rather than per keystroke, since
half a layout name is a valid string meaning something else.
Rejected input is shown as rejected rather than sanitised: these strings
are serialised into an hl.config payload, where stripping an unexpected
character would turn a typo into a different working setting.
Verified each new pointer option applies and reverts against the live
compositor. Schema, search, commit/reset, and system contracts pass.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Light is Tokyo Night Day, the palette's own light variant, rather than
one invented to merely not be dark. Both share the same hues at
different lightness, which is what lets the Prism signature survive the
switch: blue still leads into orchid, it is simply a darker blue on a
lighter ground.
Every colour token became a binding on one boolean, so flipping it
repaints the whole shell without any component needing to know it
happened. That only worked because nothing outside Theme.qml defines a
colour; the two places that did are fixed here.
Surface alphas differ by scheme. The 0.34 that reads as glass over a
dark desktop reads as haze over a light one, and text stops being
legible on it.
Two things that draw on this desktop do not read Panama's store: GTK
applications, which read gsettings, and the compositor, which draws
window borders. A toolbar or a border still wearing the other scheme is
more jarring than either scheme on its own, so ColorScheme pushes the
choice to both. It also pushes at startup, since a scheme chosen in a
previous session would otherwise be in effect only for the shell.
The unfocused window border follows too. It is a flat neutral, and a
dark neutral is invisible against a light desktop. The focused border is
the prism gradient and needs no variant.
The live preview follows the scheme as well. A preview that stayed dark
while the shell around it went light did not read as "your desktop", it
read as a screenshot of someone else's.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Theme.qml was the largest remaining thing in this desktop that could
only be changed by editing a file, and typeface is the first thing
someone changes when they want a desktop to feel like theirs. Interface
font, icon font, and the base text size are settings now.
The two font choices are deliberately separate lists. Theme.fontMono is
used only to draw glyphs -- workspace pills, the status cluster, search
icons -- so a plain monospace family there replaces every icon in the
shell with tofu. The picker offers only Nerd Fonts for that slot and
says why.
Candidates are rendered in the family they name. A list of font names
set in the current font tells you nothing about what you are choosing.
The four type sizes derive from the base rather than being stored
separately, so the relationship between body, caption, heading and title
survives a change instead of four numbers drifting apart.
hypr/looks.lua reads the same key. Following the preference only on the
QML side would leave the compositor and the shell disagreeing about the
interface font, which nobody notices until a tooltip renders in a
different typeface.
Only a family this machine reports is accepted: the value reaches
hl.config as a string, and a settings file moved between machines will
name fonts that are not installed. A missing family is reported rather
than silently substituted by fontconfig.
Also collapses the wallpaper grid to two rows. Sixty tiles is two
screens of pictures on a page that also holds typography, window
geometry and effects -- everything below it was unreachable without
scrolling past all of them.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Panama Settings shipped with Icon=preferences-system-symbolic, a
monochrome glyph drawn for 16px toolbar use. Beside full-colour
application icons in a 48px dock it reads as a missing icon rather than
a quiet one. It now has its own: a gear, because a settings icon has to
be recognisable before it is clever, rendered in the Prism gradient on
the dark tile so it belongs to this desktop.
An earlier attempt drew the gear as a ring with radial strokes; at dock
size the strokes merged into the ring and it read as an X. The shipped
version is a real toothed outline, checked at 48px rather than only at
128.
The dock also pinned GNOME Settings first. Panama now covers what GNOME
Settings did for this desktop and delegates the remainder to it by name,
so pinning the thing it delegates TO put the fallback in front of the
real one. GNOME Settings stays installed and searchable.
link-dotfiles installs icons alongside desktop entries, so this survives
a fresh setup rather than being a file that happens to exist here.
The new contract asserts every pinned application resolves to an
installed desktop entry. DockBody drops an unresolvable pin rather than
drawing a broken icon, which is right at runtime and invisible to debug:
a typo or a renamed desktop id just removes an icon with nothing logged.
It also cost me a false negative while writing it -- DesktopEntries
populates asynchronously, and asking too early reports every pin as
missing.
Also makes tests/quickshell/osd-ui-contract.sh executable. It was
committed mode 644, the only test in the suite that was, so the runner
could not invoke it. It passes.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The last two values that could only be changed by editing a file.
Weather was pinned to hardcoded coordinates, so the card could not be
pointed anywhere else. It is a location search now, not latitude and
longitude fields: nobody knows their own coordinates, and a control that
demands them is one nobody uses. Open-Meteo's geocoding endpoint needs
no key, the same reason the forecast already uses them. Only the search
term leaves the machine -- the stored place name is a label -- and
coordinates are rounded to four decimals, far finer than a weather
reading resolves and coarse enough to keep a precise home location out
of the settings file.
The graphics readout was hardcoded to card1. This machine has two amdgpu
cards, discrete and integrated, so that was right only by luck, and the
path is meaningless on any other machine. GPUs are enumerated with a
readable name from lspci, since sysfs exposes only numeric ids, and the
picker appears only when there is more than one to choose between. A
stored path the machine does not have is refused and reported rather
than silently measuring nothing.
Also merges the per-application notification rules UI. Its three commits
were believed integrated but the page half was not actually in the tree:
main had the service side in Notifs.qml and zero references to
setAppRule in NotificationsPage. Ancestry is not content.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Audited bar, dock, quick settings, date menu and Settings for three
things: a setting reachable in one UI but not another, a setting that
exists but is unreachable anywhere, and UI that states something false.
Night Light was fully exposed in Quick Settings and had no control
anywhere in Settings. It now has a card on Displays, where GNOME also
puts it, with on/off, schedule, times and temperature.
Adding those controls would have shipped the exact defect this audit
exists to find. NightLight declared enabled, temperature and automatic
as bindings on the store, but toggle() assigns to them, and an
assignment destroys a QML binding permanently -- so the service wrote to
the store and never read from it again. The Settings controls would have
written values the service ignored, while Quick Settings kept working.
It now follows the store. Every other service was swept for the same
pattern; this was the only one.
The night light schedule was two hardcoded literals, so the hours could
not be changed. They are schema keys now, with a row that renders 17.5
as "5:30 PM" and honours the 24-hour preference rather than showing a
decimal nobody reads as a time.
keyboardLayout was in the schema and read by input.lua but had no
control anywhere: configurable in principle, unreachable in practice. It
is surfaced on Input & Shortcuts as read-only, with the reason, because
it needs a compositor reload and a control implying instant apply would
be a smaller lie but still a lie.
Caffeine was a Quick Settings toggle mentioned only in a subtitle in
Settings. It has a real control now.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Registers the components and schema key the codex agent needs for the
Sound page and per-application notification rules, so its branches
compile against a manifest that already holds them rather than each
carrying a conflicting edit to the same file.
An absent notification rule is permissive rather than denying: a newly
installed application must be able to notify without an entry being
written for it first.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Resolution, refresh rate, scale, and rotation, applied through
hl.monitor{} and stored per output.
This is the only setting in Panama where a wrong value can leave the
user unable to SEE the screen well enough to undo it: a mode the panel
cannot show, or a scale that makes everything unreadable, is not
recoverable through the UI that caused it. So a change is never applied
irreversibly. It is applied, then reverted automatically after fifteen
seconds unless confirmed, and confirming is what writes it to the
settings store -- letting the countdown run leaves nothing behind.
The contract tests that property specifically: it applies a scale, waits
out the countdown, and asserts the display came back and that nothing
was stored. A regression there is not a broken feature, it is a user
staring at a blank monitor.
Modes are grouped by resolution with refresh rates beside them. The
panel reports 35, many differing only in refresh-rate rounding -- 60.00
and 59.94 -- which as a flat list of buttons is noise rather than
choice; equal rounded pairs collapse, leaving 21.
Only mode, scale, and transform are configurable. Colour management and
bit depth stay in monitors.lua because they carry a documented screencopy
tradeoff that a settings page cannot explain at the moment you would be
changing it.
Also replaces the display policy rows with the schema-bound ones, so the
page no longer restates labels that PreferenceSchema already holds.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Every bind in keybinds.lua now goes through a small wrapper that
substitutes the chord from a stored override. Only the chord is taken
from settings; the action is always the Lua value written in that file,
so an override can move a shortcut but can never make one do something
else. That is the property that makes reading them from a file the user
can edit safe, and it is why the alternative -- storing dispatchers --
was not considered.
Overrides are keyed by the shipped chord rather than the description.
Keying by description moved every bind that shared one: rebinding
SUPER+C also moved the XF86Calculator hardware key onto the same chord,
silently costing it. Chords are unique; descriptions are not.
Applying needs hyprctl reload rather than a live hl.bind. Hyprland
reports Lua-defined binds with dispatcher "__lua" and a bytecode offset,
so the action cannot be reconstructed from outside to re-bind it; reload
re-runs the config, which re-reads the settings file.
The capture control ignores modifier-only presses, because every chord
passes through them and holding Super would otherwise be captured the
moment the modifier went down. It refuses a bare letter, which would
swallow ordinary typing, and refuses a key with no keysym name rather
than storing something that would fail to bind. Rebinding onto a chord
already in use is refused rather than shadowing the existing shortcut.
The refactor was verified by snapshotting all 113 binds before and
after: the keymap is byte-identical, and identical again after applying
an override and resetting it.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
The Dock's pinned applications were a sixteen-entry literal in
Settings.qml, so changing what sits in the Dock meant editing QML. They
are now an ordered list in the shared store, with move up, move down,
unpin, and a filtered picker for adding installed applications. Keeping
them in the shared store rather than a file of their own means they are
covered by Restore defaults like everything else.
This needed a "json" schema type for values the schema stores and resets
but does not validate field by field. It exists so structured settings
can live in the one file rather than growing a fourth preference store;
the owning service validates the contents.
Snapshots make the settings app safe to experiment with. The whole
configuration is one file, so a backup is a copy and a restore is an
overwrite, and restoring snapshots what it replaces so it is itself
undoable. A snapshot is validated as JSON before it can be restored over
a working configuration, and a name that is not a plain snapshot
filename from the backup directory is refused.
Snapshot names carry milliseconds. At one-second resolution a save
followed promptly by a restore produced the same filename twice, and the
restore's own safety snapshot overwrote the file it was about to read --
found by the contract, which restores immediately after saving.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Wires the schema entries and routing the codex agent needs for default
applications, weather, vitals refresh, notification timing, and capture,
so its pages can be written against keys that already exist.
Capture directories and encoder arguments are enums rather than free
text. Both are handed to a recorder process, and a settings page has no
reason to expose an arbitrary string there.
ApplicationsPage.qml is a placeholder so the page id can be routed,
registered, and searchable before the real page lands. It is owned by
the other agent and expected to be replaced wholesale.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Continues the settings expansion toward replacing GNOME Settings for
everything Panama actually owns.
Wallpaper. A thumbnail grid rather than a path field: the value of this
setting is the picture, so typing a path to something you cannot see is
the worst version of it. Two things about hyprpaper 0.8 shaped this. Its
IPC is much smaller than older documentation suggests -- preload,
listloaded, unload, and reload all answer "invalid hyprpaper request",
so setting is a single call with no preload. And the "<empty>,<path>"
form that used to mean every output is silently ignored, so a wallpaper
set that way appears to succeed and never changes; outputs are walked
explicitly instead. hyprpaper.conf lives in the repo through the
~/.config/hypr symlink and so cannot hold machine state, which is why
the choice lives in the shared settings store and is re-applied at
startup.
Power & Lock. hypridle has no IPC for reconfiguration and its config is
hyprlang rather than the shared JSON, so scripts/panama-idle generates a
config from the settings store and restarts the daemon. The generated
file lives under XDG_STATE_HOME for the same symlink reason, with a
systemd drop-in pointing hypridle at it. Management is a real state and
the page says which one you are in rather than showing sliders that
quietly do nothing. Zero means never for all three timers, which a naive
template would render as "immediately".
Date & Time. Deliberately not stored in Panama's settings: the timezone
and network time belong to the machine and are shared with sessions that
never see this file. Storing a copy would create a second answer to a
question the system already answers. Reads and writes timedatectl
directly; a cancelled polkit prompt surfaces as an error rather than as
a value that appears to have been accepted.
Accessibility. Pointer size and text scale have to agree across three
consumers with no shared configuration -- the compositor, GTK, and the
shell -- so the store is the source of truth and the values are pushed
outward to gsettings and hyprctl setcursor.
Search now indexes the schema instead of the twelve page labels. "gaps",
"wallpaper", and "screenshot" previously found nothing on an app that
has all three, which is the clearest way a settings app feels smaller
than it is. Shortcuts are indexed by what they do. A contract asserts
every non-internal schema label is reachable, so a new setting cannot be
added in an undiscoverable state.
The GNOME delegation allow-list was widened to the panel names
gnome-control-center actually reports; the previous list contained
"users", which is not one of them and so opened nothing.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Stage 3 and 4 of docs/superpowers/plans/2026-08-17-panama-cohesion.md.
Add SettingsPage plus ToggleRow, SliderRow, ChoiceRow, ActionRow, and
TextRow. A row names a schema key and needs nothing else: label, detail,
range, and unit come from PreferenceSchema, and writes go through
SystemSettings.commitPreference, which routes compositor-backed keys
through apply-and-verify and local keys straight to the store. The page
scaffold that was copy-pasted eleven times is now one component.
Rebuild Appearance around a live preview of the real desktop, scaled by
the ratio between the preview and the actual monitor so a 10px gap on a
4500px display looks as small as it is. Rebuild Desktop & Dock and Input
& Shortcuts on the shared rows, replacing the read-only text that stood
in for controls that were merely expensive to add.
Generate the shortcut list from hyprctl binds. The page held a
hand-typed nineteen entries against a real keymap of a hundred and
thirteen; it could not show the rest and went stale whenever a bind
changed. Every bind now carries its own description -- backfilled for
the twenty-nine that lacked one -- and keybinds-contract.sh fails if any
bind lacks one, since undescribed binds are dropped from the page.
Make Restore defaults span every store Panama owns. Resetting only the
schema store left the Home accessory arrangement customised while
claiming to restore defaults, which is worse than no reset because it is
silent. Done through HomePreferences' existing public aliases rather
than a new API.
Four defects found while building:
cursor:inactive_timeout is answered by getoption as float, not int. A
wrong readAs does not fail loudly; it makes every write to that key look
rejected, and the user saw an error for a change that worked.
schema-hypr-shape-contract.sh now checks all 23 mapped options against
the running compositor.
The Settings window is tiled, so implicitWidth is only a hint and rows
must survive roughly 400px. SliderRow stacks its control under the label
below 520px.
Binding an anchor to undefined to switch layouts does not reliably
release it. Both row layouts are positioned explicitly.
Concurrent compositor writes are queued and merged rather than refused.
The startup replay of every compositor-backed preference routinely
overlaps a UI change, and refusing left the store and the compositor
disagreeing.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Panama had grown into three configuration surfaces that only agreed because
they had been typed to agree: looks.lua hardcoded values, DesktopPreferences
independently defaulted the same values, and SystemSettings replayed them at
startup. Nothing kept them in sync, and the Lua side read no shared state at
all. This lands the first three stages of docs/superpowers/plans/2026-08-17-panama-cohesion.md.
Fix silently failing Hyprland writes. On a Lua-configured Hyprland, hyprctl
keyword refuses the write, prints the refusal to stdout, and still exits 0, so
the HDR, VRR, and direct-scanout toggles persisted their value and reported
success while the compositor never changed. Writes now go through hyprctl eval,
which has the same hazard on syntax and runtime errors, so success is defined
as reading the value back and finding it equal. The existing contract passed
throughout the outage because it re-applied the values already in place; the
new one flips each value to something it does not hold.
Derive preferences from a schema. Every setting used to be restated four times
-- a property alias, a JSON adapter property, a change handler, and a line in
reset -- where omitting any one failed silently. PreferenceSchema.qml is now
the single source, and persistence, validation, reset, and the Hyprland mapping
all derive from it. Unknown keys on disk survive a write so a rollback does not
discard a newer build's settings, and a corrupt file falls back to shipped
defaults. The store moved to ~/.config/panama/settings.json, migrating from the
old state directory without deleting it.
Share that file with Hyprland. prefs.lua reads it at config time with every
shipped literal kept as the fallback, so the config still stands alone. The Lua
is the default, the JSON is the truth, and Settings is the editor. The
compositor-adjustable surface goes from 3 keys to 23.
Also fixes two test-hygiene bugs found by running the suite end to end for the
first time: settings-pages-contract could see the window settings-window-contract
leaves behind, and the new write contract was persisting its deliberately-wrong
values into the user's real store.
Claude-Session: https://claude.ai/code/session_01BRvzt4H8XXLPVH5MyYdk9L
Gabriel Brown